SEARCH · PubMed Health

Results for “Efficiency”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

PubMed2005

The efficiency of muscle contraction.

When a muscle contracts and shortens against a load, it performs work. The performance of work is fuelled by the expenditure of metabolic energy, more properly quantified as enthalpy (i.e., heat plus work). The ratio of work performed to enthalpy produced provides one measure of efficiency. However, if the primary interest is in the efficiency of the actomyosin cross-bridges, then the metabolic overheads associated with basal metabolism and excitation-contraction coupling, together with those of subsequent metabolic recovery process, must be subtracted from the total heat and work observed. By comparing the cross-bridge work component of the remainder to the Gibbs free energy of hydrolysis of ATP, a measure of thermodynamic efficiency is achieved. We describe and quantify this partitioning process, providing estimates of the efficiencies of selected steps, while discussing the errors that can arise in the process of quantification. The dependence of efficiency on animal species, fibre-type, temperature, and contractile velocity is considered. The effect of contractile velocity on energetics is further examined using a two-state, Huxley-style, mathematical model of cross-bridge cycling that incorporates filament compliance. Simulations suggest only a modest effect of filament compliance on peak efficiency, but progressively larger gains (vis-à-vis the rigid filament case) as contractile velocity approaches Vmax. This effect is attributed primarily to a reduction in the component of energy loss arising from detachment of cross-bridge heads at non-zero strain.

Actomyosin↗

PubMed2005

Development of novel method of non-viral efficient gene transfer into neonatal cardiac myocytes.

To establish new treatment for cardiovascular disease, the development of safe and highly efficient vectors is necessary. Especially, non-viral vectors are considered to be ideal for human gene therapy, since recent adverse events with retroviral or adenoviral vectors have highlighted the issue of safety. Although we previously reported safety and high efficiency of HVJ-liposome method, we have modified the envelope of HVJ (Sendai virus). In this novel non-viral vector, the envelope of HVJ alone was utilized as a carrier to deliver proteins, genes and oligodeoxynucleotides (ODN). Thus, we optimized the transfection efficiency of HVJ-envelope vector into neonatal cardiac myocytes in this study, since cardiac myocytes is one of the most difficult cells to be transfected. HVJ-envelope, obtained after complete destruction of HVJ genome, containing FITC-labeled ODN or luciferase plasmid was incubated with cardiac myocytes. In addition, the concentration of protamine sulfate was modified (0-700 microg/ml) to increase transfection efficacy. Without HVJ-envelope vector, few cells showed fluorescence, whereas most cells demonstrated fluorescence with HVJ-envelope vector. Consistent with the high transfection efficiency of ODN, high luciferase activity was also detected using HVJ-envelope vector. Moreover, the transfection efficiency varied according to the concentration of protamine sulfate. No obvious cytotoxicity was observed in cells transfected with HVJ-envelope vector. The present study demonstrated the development of a highly efficient novel non-viral vector for cardiac myocytes, suggesting that further development may provide a new useful tool for research and clinical gene therapy in the field of cardiovascular disease.

Animals↗

PubMed1998

Impaired ventilatory efficiency in chronic heart failure: possible role of pulmonary vasoconstriction.

BACKGROUND: Patients with chronic heart failure show impairment of ventilatory efficiency, defined as the relation between ventilation and carbon dioxide output. It is caused by ventilation of excess physiologic dead space. We hypothesized a role of active vasoconstriction in the increase of physiologic dead space, presumed to lead to alveolar hypoperfusion. METHODS AND RESULTS: In 57 patients with chronic heart failure (New York Heart Association classification II through IV, ejection fraction 25.6%+/-10.4%) and 7 control subjects, gas exchange at rest and on exercise was compared with hemodynamic measurements and, in a subgroup of 15 patients, with endothelin-1, epinephrine, and norepinephrine levels in the pulmonary and systemic circulation. Ventilatory efficiency at rest (VE/VCO2 ratio) correlated with ventilatory efficiency on exercise (VE vs VCO2 slope). Impairment of ventilatory efficiency correlated strongly negative with exercise tolerance (maximal oxygen uptake: r = -0.67) and cardiac output (r = -0.66) and positive with pulmonary hypertension (mean pulmonary artery pressure: r = 0.69, pulmonary vascular resistance: r = 0.60). None of the vasoconstrictors correlated with reduction of ventilatory efficiency in the subgroup studied. CONCLUSIONS: Impairment of ventilatory efficiency in chronic heart failure is correlated with resting pulmonary artery pressures and associated with the impairment of exercise capacity. An imbalance of pulmonary vascular tone probably leads to both pulmonary hypertension and alveolar hypoperfusion.

Adult↗

PubMed2000

Separation efficiency of a wood dust collector-field measurement using a fluorescent aerosol.

Given the dangerous nature of the dust emitted in the wood industry, the quality of the recycled air in the work premises after cleaning must be strictly controlled.A method of measuring the efficiency of a wood dust collector as a function of the particle diameter has been developed using a fluorescein tracer aerosol generated upstream of the equipment. The separation efficiency is determined from the particle size mass distribution of the tracer, both upstream and downstream, measured by means of two cascade impactors. The mass efficiency measured by tracer technique was compared on a test rig to the number efficiency measured using a reference method based on optical counting. The agreement between the two efficiencies is quite good; nevertheless, the tracer method leads to results that are slightly below those obtained using the reference method. The method was applied to measure the efficiency of a 11 500 m(3) h(-1) wood dust collector. The results are presented along with those obtained from a sample of plane filter media making up the bags of the dust collector.

Aerosols↗

PubMed2003

Direct compression of the failing heart reestablishes maximal mechanical efficiency.

BACKGROUND: In failing hearts, homeostatic mechanisms contrive to maximize stroke work and maintain normal arterial blood pressure at the expense of energetic efficiency. In contrast dobutamine reestablishes maximal mechanical efficiency by promoting energetically optimal loading conditions. However, dobutamine also wastefully increases nonmechanical oxygen consumption. We investigated whether direct mechanical cardiac compression would reestablish maximal mechanical efficiency without the oxygen-wasting effect. METHODS: The pressure-volume relationship and myocardial oxygen consumption were derived in sheep using left ventricular pressure and volume from manometer-tipped and conductance catheters, and coronary flow from Transonics flow probe. RESULTS: Propranolol hydrochloride and atropine sulfate were administered to reduce ejection fraction to 21% when ventricular elastance fell to 1.35 mm Hg/mL and mechanical efficiency to 79% of maximal. Low-pressure direct mechanical compression of the failing heart restored mechanical efficiency to 94% of maximal and realigned optimal left ventricular end-systolic pressure with operating left ventricular end-systolic pressure without altering nonmechanical oxygen consumption. CONCLUSIONS: We conclude that direct cardiac compression restores mechanical efficiency to normal maximum without wasting energy on additional nonmechanical activity.

Animals↗

PubMed1989

Thermodynamic efficiency of bacterial growth calculated from growth yield of Pseudomonas oxalaticus OX1 in the chemostat.

In order to determine the thermodynamic efficiency of bacterial growth, Pseudomonas oxalaticus OX1 was grown in carbon-limited continuous cultures. 11 different carbon sources, ranging from oxalate (most oxidised component) to ethanol (most reduced component), were used as limiting substrate in these experiments. From the experimental yield values (expressed as C-mol dry weight produced per C-mol carbon substrate consumed) the thermodynamic efficiencies were calculated. On substrates more reduced than biomass (such as ethanol and glycerol) the thermodynamic efficiency of growth of P. oxalaticus was negative but it reached a maximum of 23 +/- 3% with substrates with a degree of reduction of 3 (citrate) and lower. The actual concentrations of the components involved were incorporated into the calculations but this affected the overall thermodynamic efficiency only to a small extent. This result strengthens the conclusion of Westerhoff et al. (Westerhoff, H.V., Hellingwerf, K.J. and Van Dam, K. (1983) Proc. Natl. Acad. Sci. 80, 305-309) that bacteria have been optimised towards a theoretical thermodynamic efficiency of 24%, corresponding with maximisation of growth rate at optimal efficiency, with highly oxidised substrates.

Bicarbonates↗

PubMed2001

Efficient GFP mutations profoundly affect mRNA transcription and translation rates.

Green fluorescent protein (GFP) variants with higher expression efficiencies have been generated by mutagenesis. Favorable mutations often improve the folding of GFP. However, an effect on protein folding fails to explain the efficiency of several other GFP mutations. In this work, we demonstrate that mutations of the GFP open reading frame and untranslated regions profoundly affect mRNA transcription and translation efficiencies. The removal of the GFP 5' untranslated region halves the transcription rate of the GFP gene, but hugely improves its translation rate. Mutations of the GFP open reading frame or the addition of peptide sequences differentially reduce the GFP mRNA transcription rate, translation efficiency and protein stability. These previously unrecognized effects are demonstrated to be critical to the efficiency of GFP mutants. These findings indicate the feasibility of generating more efficient GFP variants, with optimized mRNA transcription and translation in eukaryotic cells.

5' Untranslated Regions↗

PubMed1990

Construction of Escherichia coli amber suppressor tRNA genes. II. Synthesis of additional tRNA genes and improvement of suppressor efficiency.

Using synthetic oligonucleotides, we have constructed 17 tRNA suppressor genes from Escherichia coli representing 13 species of tRNA. We have measured the levels of in vivo suppression resulting from introducing each tRNA gene into E. coli via a plasmid vector. The suppressors function at varying efficiencies. Some synthetic suppressors fail to yield detectable levels of suppression, whereas others insert amino acids with greater than 70% efficiency. Results reported in the accompanying paper demonstrate that some of these suppressors insert the original cognate amino acid, whereas others do not. We have altered some of the synthetic tRNA genes in order to improve the suppressor efficiency of the resulting tRNAs. Both tRNA(CUAHis) and tRNA(CUAGlu) were altered by single base changes, which generated -A-A- following the anticodon, resulting in a markedly improved efficiency of suppression. The tRNA(CUAPro) was inactive, but a hybrid suppressor tRNA consisting of the tRNA(CUAPhe) anticodon stem and loop together with the remainder of the tRNA(Pro) proved highly efficient at suppressing nonsense codons. Protein chemistry results reported in the accompanying paper show that the altered tRNA(CUAHis) and the hybrid tRNA(CUAPro) insert only histidine and proline, respectively, whereas the altered tRNA(CUAGlu) inserts principally glutamic acid but some glutamine. Also, a strain deficient in release factor I was employed to increase the efficiency of weak nonsense suppressors.

Anticodon↗

PubMed1997

The efficiency of removal of lead and other elements from domestic drinking waters using a bench-top water filter system.

The efficiency of removal of lead (Pb) and other elements from natural drinking waters using a bench-top water filter system was evaluated in three recently-built houses in Sydney, Australia, and two from rural centres. In addition, one filter system was tested for copper (Cu), Pb and cadmium (Cd) under rigorously-controlled laboratory conditions using Sydney water. For two Sydney houses, the efficiency was evaluated using special filter cartridges concomitant with the ordinary filters. Waters after passing through the filter, was sampled when the filter had been exposed to '0', 50, 100, 150, 200, and 250 l respectively and were analysed for lead isotopes and lead concentrations by high precision isotope dilution mass spectrometry. Samples that passed through the filter after '0', 50, 150 and 250 l collections were analysed for four anions and 39 cations by various methods. Sydney water was fairly uniform in its anion and cation composition, whereas water from the two rural areas contained higher concentrations of Ca, Mg and HCO3. Effects of the filter on the water compositions can be summarised into three groups: (1) elements removed during filtration--Ca, Mg, Sr, Ba, Cu, Pb, Zn and Ni. With 'age' of the filter, the efficiency of removal for Pb was maintained in the two houses with Pb concentrations greater than 10 micrograms/l in the first flush water and was maintained for Cu through all concentrations. Ca, Mg, Sr and Ba were largely removed in the first 50 1 of usage. (2) Elements added during filtration--K, Rb, Ag and P. Except for Ag, which was present throughout the testing period, these elements were added only in the first filtration. (3) Elements unaffected by filtration--Al, Si, Na, Fe, Cl and F. Efficiency of Pb removal from tap water by this system depends generally on the initial Pb content in the water. However, it also seems to depend, to some extent, on Pb speciation and water composition, as found in earlier studies of natural waters. The control in filtering efficiency as a function of Pb speciation and chemical composition becomes more important at low initial Pb concentrations in the water. However, the Pb concentrations at which speciation and water composition appear to play a role in filter efficiency are so low that these factors, though scientifically interesting, have no relevance from a practical point of view, especially the impact on human health. Acidification of six sets of duplicate water samples, one sample immediately after collection and the other acidified after more than 2 weeks, showed negligible changes in Pb or Cu concentrations between duplicates.

Anions↗

PubMed2001

Improving the transfection efficiency of post-mitotic neurons.

The transfection of post-mitotic cells, including primary cortical and hippocampal neurons, has proven for the most part to be inefficient. Methods such as DNA/Ca++ phosphate co-precipitation, electroporation, cationic lipids and micro-injection are often toxic to the cell and rarely give a transfection efficiency exceeding 3% of the surviving culture. Virus transfection methods using modified viruses such as adeno and semliki-forest virus have been shown to be more efficient but the procedures are often time consuming and virus infections may interfere with protein processing. In this study, we evaluated the transfection efficiency of cells from E18 rat embryonic cortical and hippocampal tissues using three cationic lipids: LIPOFECTAMINE, LIPOFECTAMINE Plus, and LIPOFECTAMINE 2000. The method of transfection was by a traditional reporter gene beta-galactosidase (pCMV.SPORT-beta-gal). Results show that out of the three cationic lipids tested, LIPOFECTAMINE 2000 allows for a significantly higher transfection efficiency. Transfection efficiency with LIPOFECTAMINE or LIPOFECT-AMINE Plus was <3%. In contrast, transfection efficiency with LIPOFECT-AMINE 2000 was approximately 20-25% with the cortical neurons and 25-30% with the hippocampal neurons.

Animals↗

PubMed2000

Transfection efficiency increases by incorporating hydrophobic monomer units into polymeric gene carriers.

The water soluble terpolymer, poly(N-isopropylacrylamide (IPAAm)-co-2-(dimethylamino)ethyl methacrylate (DMAEMA)-co-butylmethacrylate (BMA)) was synthesized, and its efficiency in in vitro gene transfection was evaluated. Copolymers with different compositions were synthesized by radical polymerization. For a series of copolymers containing 60 mol% of DMAEMA, the plasmid bands were retained within the gel loading slot, independent of polymer/plasmid weight ratios or BMA monomer content. In contrast, for a series of copolymers containing 20 mol% DMAEMA, plasmid bands of complexes were retarded with increasing weight ratios. For the copolymer with 10 mol% BMA content, the plasmid was completely retained within the gel loading slot. The transfection efficiency of polymer/plasmid complexes was evaluated in COS-1 cells using a pCMV-lacZ plasmid, encoding for beta-galactosidase as a reporter gene. Transfection efficiency of a series of copolymers containing 20 mol% of DMAEMA varied with BMA content. The transfection efficiency of the copolymers with 0, 2, and 5 mol% of BMA was low. The transfection efficiency of the copolymers with 10 mol% of BMA was about 2-fold higher than that of the PDMAEMA control homopolymer. The transfected cells were observed at a very wide range of polymer/plasmid weight ratios. The transfection efficiency of all copolymers containing 60 mol% of DMAEMA was lower than that of the PDMAEMA homopolymer.

Animals↗

PubMed2004

[Prescription of drugs in family medicine: on the trail of efficiency].

OBJECTIVE: To analyse the effect of various factors on the efficiency of drug prescription by general practitioners (GPs). DESIGN: Descriptive, cross-sectional study. SETTING: Primary care in Murcia, Cartagena, and Lorca, in which 535 GPs work in the care of 921,281 people. Murcia Region (Spain).Participants. Prescriptions issued by the 288 GPs who were working constantly and continuously in May-June 1998 and who were away from work for no longer than 10% of the time (53.8%). MAIN MEASUREMENTS: We measured their efficiency with two general indicators--potential saving (PS) and prescription of generics (PG)--and 3 specific indicators: efficiency of prescription of omeprazole (EO), enalapril (EE), and ranitidine (ER). We analysed their relationship with structural-organisational factors and with the population attended, the doctor and his/her action. Bivariate and multivariate analyses (logistic regression) were used. RESULTS: There was an association with programmed consultation (PC); a weak inverse relationship with age of doctor, years qualified, pensioners allocated, case load and inter-consultations conducted; and a direct correlation with the length of the consultation. PG was related to rural environment, being non-permanent, specialist in family medicine, belonging to a primary care team. In the multivariate analysis PC was related to all the indicators: PS (OR=1.96), PG (OR=2.10), EO (OR=2.63), ER (OR=2.84), EE (OR=2.06); and the inter-consultations conducted with general efficiency of PS (OR=1.70), PG (OR=1.91). Rural environment was the worst for PS (OR=2.43). CONCLUSIONS: The main factors related to the efficiency of GPs prescription can be changed. The most important is the existence of PC. A lot of inter-consultations and working in a rural environment means worse general efficiency.

Adult↗

PubMed2002

Kinetics and efficiency of excitation energy transfer from chlorophylls, their heavy metal-substituted derivatives, and pheophytins to singlet oxygen.

Time-resolved measurements of the singlet oxygen infrared (1269 nm) luminescence were used to follow the kinetics and efficiency of excitation energy transfer (EET) between chlorophyll (Chl) derivatives and oxygen in acetone. The studied pigments were Mg-Chl a and b and their heavy metal (Cu(2+) and Zn(2+))-substituted analogues, as well as pheophytin (Pheo) a and b. The efficiency of EET from chlorophyll to oxygen was highly dependent on the central ion in the pigment. Cu-Chl a and Cu-Chl b had the lowest efficiencies of singlet oxygen production, while Pheo a had a higher one, and Zn-Chl a had a similar one compared to Mg-Chl a. Also the side chain (position C-7, i.e. Chl a vs. Chl b) influenced the efficiency of singlet oxygen formation. In the case of square-planar complexes like Cu-Chl and Pheo, EET was more efficient in the Chl a derivatives than in those of Chl b; the opposite effect was observed in the case of the five- or six-coordinated Mg-Chl and Zn-Chl. As for the lifetime of the Chl triplet state, the most striking difference to Mg-Chl again was found in the case of Cu-Chls, which had much shorter lifetimes. Furthermore, the central ion in Chl affected the physical quenching of singlet oxygen: its efficiency was decreasing from Mg-Chl through Zn-Chl over Cu-Chl to Pheo. The results are discussed in the context of the oxidative stress accompanying heavy metal-induced stress in plants.

Chlorophyll↗

PubMed2003

High osmotic stress improves electro-transformation efficiency of fission yeast.

A preincubation of fission yeast cells with hyperosmotic solution improved the electro-transformation efficiency. The efficiency increased approximately five-fold when the cells were preincubated with 2.0 M sorbitol and 1.5 M NaCl at 30 degrees C for 60 min before an applied high electric pulse. Losses in the efficiency of the cells after hyperosmotic stress above 2.5 M sorbitol and 2.0 M NaCl were directly related to the marked reduction of viability. The efficiency at 2.0 M sorbitol gradually increased until 60 min of the preincubation period, but longer exposure resulted in a gradual decrease. On the other hand, when the cells of the osmotic-sensitive mutant were preincubated with isosmotic solution of 0.5 M sorbitol, the efficiency was also dramatically increased by approximately 15-fold. These improvements in efficiency were observed in sublethal conditions of osmotic stress regardless of osmoticums and strains.

Colony Count, Microbial↗

PubMed1999

Genetic engineering of stent grafts with a highly efficient pseudotyped retroviral vector.

PURPOSE: The purpose of this study was first to compare the gene transfer efficiency of amphotrophic murine leukemia viral vector (ampho-MuLV) with the efficiency of MuLV pseudotyped with the vesicular stomatitis virus G glycoprotein (VSVG-MuLV) in tissue of vascular origin. The second purpose of this study was to determine cell retention after the implantation of genetically engineered stent grafts. METHODS: Gene transfer efficiency was ascertained with the b-galactosidase assay. The target tissues included endothelial cells (ECs), smooth muscle cells (SMCs), and human saphenous veins (HSVs). Polyurethane stent grafts were suffused with lac Z-transduced ECs and SMCs that were harvested from porcine jugular vein. The grafts were implanted into the iliac artery of each pig whose jugular vein had been harvested. Cell retention was analyzed at 1 and 4 weeks with X-Gal staining. RESULTS: VSVG-MuLV transduction efficiency exceeded that of ampho-MuLV in human ECs (VSVG-MuLV, n = 24, 89% +/- 6%; ampho-MuLV, n = 18, 14% +/- 6%; P <. 001), human SMCs (VSVG-MuLV, n = 5, 92% +/- 3%; ampho-MuLV, n = 4, 17% +/- 2%; P <.001), pig ECs (VSVG-MuLV, n = 4, 81% +/- 2%; ampho-MuLV, n = 4, 13% +/- 3%; P <.001), and pig SMCs (VSVG-MuLV, n = 5, 89% +/- 3%; ampho-MuLV, n = 4, 16% +/- 1%; P <.001). As much as a 10-fold higher transduction efficiency was observed with VSVG-MuLV in HSVs. After the stent graft implantation, the engineered cells were retained and proliferated on the stent membrane, with ingrowth into the underlying intima. CONCLUSION: VSVG-MuLV significantly increased the gene transfer efficiency in vascular SMCs and ECs and in organ-cultured HSVs. The cells were retained and proliferated on stent grafts for the short term in the pig.

Animals↗

PubMed2000

Study of the NaI(Tl) efficiency by Monte Carlo method

The Sodium Iodide detector NaI(Tl) presents a great efficiency for gamma-photon and the X-ray detection. The purpose of the present work is to study this efficiency versus different parameters that are related to the detection phenomenon. This has been achieved by using both analytical method and Monte Carlo simulation which give the same results. We have found that the intrinsic efficiency has a minimum at d/R approximately 0.7 (d is the source-NaI(Tl) distance and R is the NaI(Tl) radius). In order to explain this minima we have used the Dirac theory for the mean chord 1 of photons in the NaI(Tl) crystal and we have determined asymptotic limits of the efficiency corresponding to the following asymptotic limits of the mean chord: 1 = L (L: NaI(Tl) length) for large d/R and 1 = 4/3R for small d/R for point source. For distributed source (disk) the minimum is less pronounced and the asymptotic limit of the intrinsic efficiency is less than for the punctual source for small d/R while they are the same for large d/R. The total efficiency falls down at the d/R ratio corresponding to the minimum of the gamma-photons mean chord in the NaI(Tl) crystal so for a good photon detection we have shown that the source detector distance must respect the inequality: d/R < 0.01.

Journal Article↗

PubMedDate not supplied

Production of Co-60 sources for high-accuracy efficiency calibrations of gamma-ray spectrometers.

Activity determination by gamma-ray spectrometry is a valuable aid which is widely used where radioactive sources are applied. For the construction of an efficiency curve vs. energy in a standard geometry, the accuracy is limited not only by the uncertainty of peak area determination and the knowledge of the relevant emission probabilities but also by the uncertainties of the activity values applied to efficiency calibration with standard sources. Recently, a method to determine a relative efficiency function using selected radionuclides with gamma cascades of well known emission probabilities has been developed which yields very accurate efficiency values. Such a curve has to be converted into an absolute efficiency curve by calibration of the detector system with at least one source of very well known activity. Especially for this purpose, a set of Co-60 gamma-ray spectrometer sources was produced at the PTB. The activity values (10-45 kBq) were measured by the 4pi beta-gamma coincidence technique with a standard uncertainty of less than 0.1%. Production and measurement of these sources are described in the present paper. Special care was taken to include all contributions to the standard uncertainty of the activity value when establishing the uncertainty budget for the activity of each of these sources. The activity ratio of two of these sources, as obtained by the absolute measurements, was checked by independent gamma-ray counting at two other laboratories, where the precision achieved was less than 0.2%. The procedure described is considered to be a step towards more accurately determined efficiency functions in gamma-ray spectrometry.

Journal Article↗

PubMed2003

Characterization and relative ionization efficiencies of end-functionalized polystyrenes by matrix-assisted laser desorption/ionization mass spectrometry.

The properties and relative ionization efficiencies of a series of polystyrenes (PS) with hydroxyl, hydrogen, tertiary amine, and quaternary amine end-functionalities were examined by matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS). The hydrogen and hydroxyl functionalized PS ionized via attachment of a single Ag(+) cation, as expected. However, tertiary amine PS oligomers were found in (M - H)(+) and (M + H)(+) forms, in addition to M + Ag(+), while the quaternary amine PS oligomers only ionized to the M(+) form. Analysis of tertiary amine PS spectra revealed varying ratios of the three ionic forms depending on the oligomer length, pointing to a change in ionization efficiency. When the bulk samples were compared, the quaternary amine end-functionalized PS gave a ten-fold higher ionization efficiency over all others studied, likely because of the preexisting charge on the functionality. Samples with hydroxyl and hydrogen functionalities had similar ionization efficiencies, with the tertiary amine slightly higher, depending on the molecular weight. Changes in molecular weight affected the relative ionization efficiencies in varying fashion depending on the end functionality, though average molecular weight measurements were largely unaffected by end-functionality. Quantification of end-functionalized polystyrenes with different ionization efficiencies was found to be possible if due care was taken.

Journal Article↗