PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Fluorocarbon Polymers”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources
PubMed1998

Rapid fluorescent monitoring of total protein patterns on sodium dodecyl sulfate-polyacrylamide gels and western blots before immunodetection and sequencing.

The fluorogenic dye 2-methoxy-2,4-diphenyl-3(2H)-furanone (MDPF) has been used for the detection of total protein patterns on polyvinylidene difluoride (PVDF) membranes. Fluorescent staining of protein bands on membranes with this covalent dye is completed in 20 min. Wet membranes are translucent, allowing protein visualization by transillumination with ultraviolet light. The resulting images can be recorded using Polaroid film or a charge-coupled device camera. Electrophoretic bands containing 5-10 ng of protein can be detected on the MDPF-stained Western blot. When proteins are directly transferred to the membrane using a slot blotting device, as little as 0.5 ng of protein can be detected. Previous visualization of protein bands on sodium dodecyl sulfate-polyacrylamide gels with the noncovalent fluorescent dye Nile red (Alba et al., BioTechniques, 1996, 21, 625-626) does not interfere with further MDPF staining and fluorescent detection of these bands transferred to PVDF membranes. Thus, Nile red and MDPF staining can be performed sequentially, allowing the rapid monitoring of total protein patterns on both the electrophoretic gel and Western blot. Using the conditions described in this study, MDPF staining does not preclude further N-terminal microsequencing and immunodetection of specific bands with polyclonal antibodies.

Animals↗
PubMed2004

Nafion membrane electrophoresis with direct and simplified end-column pulse electrochemical detection of amino acids.

A novel electrophoresis technique, in which the separation column was replaced by a strip of Nafion membrane (5.0 cm x 0.20 mm x 0.25 mm), was developed for the separation of an amino acid mixture (glycine, asparic acid and lysine), followed by quadruple-pulse electrochemical detection. Nafion membrane contains hydrophilic pores (10-20 A and 50-60 A in size) acting as very narrow electrophoresis channels. The fixed-charge sites (-SO(3) (-)) on the hydrophilic pore surface provide a strong charged background. A platinum disk electrode (0.90 mm inner diameter) was employed as the detection electrode and the electrophoresis cathode was used as the quasi-reference and counter electrode for the end-column electrochemical detector, without decoupler. Under optimized conditions the mixture of amino acids could be separated at a voltage of only 90 V with a detection limit of 10(-7) M, indicating that Nafion membrane electrophoresis is a potentially attractive technique for the separation of small organic molecules or ions.

Amino Acids↗
PubMed2005

Tris(2,2'-bipyridyl)ruthenium(II)-zirconia-Nafion composite films applied as solid-state electrochemiluminescence detector for capillary electrophoresis.

The major goal of this work was to develop a new solid-state electrochemiluminescence (ECL) detector suitable for capillary electrophoresis (CE). The detector was fabricated by coating a sol-gel derived zirconia (ZrO(2))-Nafion composite film on a graphite electrode, then the zirconia-Nafion modified electrode was immersed in tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3) (2+)) solution to immobilize this active chemiluminescence reagent. The voltammetric and ECL behaviors of the detector were investigated and optimized in tripropylamine solution. The ratio of 53% for zirconia in the zirconia-Nafion composite provided the highest luminescence intensity of immobilized Ru(bpy)(3) (2+). The ECL can maintain its stability very well in the phosphate solution in the period of 5-90 h when the solid-state ECL detector was immersed in the solution all the time. The optimum distance of capillary outlet to the solid-state ECL detector has been found to be ca. 50-80 microm for a 75 microm capillary. The effects of ionic strength and pH of ECL solution on peak height were investigated. The CE with solid-state ECL detector system was successfully used to detect tripropylamine, lidocaine, and proline. The detection limits (S/N = 3) were 5 x 10(-9) mol.L(-1) for tripropylamine, 1 x 10(-8) mol.L(-1) for lidocaine and 5 x 10(-6) mol.L(-1) for proline, and the linear ranges were from 1.0 x 10(-8) to 1.0 x 10(-5) mol.L(-1) for tripropylamine, 5.0 x 10(-7) mol.L(-1) to 1.0 x 10(-5) mol.L(-1) for lidocaine and 1.0 x 10(-5) to 1.0 x 10(-3) mol.L(-1) for proline, respectively.

Electrophoresis, Capillary↗
PubMed2005

Rapid on-membrane proteolytic cleavage for Edman sequencing and mass spectrometric identification of proteins.

A method for the rapid limited enzymatic cleavage of PVDF membrane-immobilized proteins is described. This method allows the fast characterization of PVDF blotted proteins by peptide mass fingerprinting (Henzel, W. J., Billeci, T. M., Stults, J. T., Wong, S. C., Grimley, C., Wantanabe, C., Proc. Natl. Acad. Sci. USA 1993, 90, 5011-5015), LC-MS/MS, or N-terminal sequencing and has been demonstrated on a range of proteins using a full complement of proteolytic enzymes. This technique allows the generation of proteolytic fragments between 5 and 60 min (depending on the enzyme employed), which is significantly faster than previously reported on-membrane digestion methods. To date, this on-membrane rapid digestion protocol has aided in the identification and confirmation of mutation sites in over 200 recombinant proteins.

Amino Acid Sequence↗
PubMed2002

Fluorinated surface-modifying macromolecules: modulating adhesive protein and platelet interactions on a polyether-urethane.

Polyether-urethanes (PEUs) have been the materials of choice for the manufacture of conventional blood-contacting devices. Nevertheless, biostability and blood compatibility are still among the principal limitations in their long-term application. Studies investigating the development of protective coatings for PEUs have shown that degradation can be reduced with the use of fluorinated surface-modifying macromolecules (SMMs). It has also been hypothesized that SMM-modified PEU surfaces may exhibit improved blood compatibility because other studies have shown a modulation in fibrinogen adsorption onto these surfaces. To determine the blood compatibility of a PEU-containing fluorinated SMMs, a series of in vitro experiments were designed to study the pattern of protein adsorption from plasma and then to assess the nature of platelet adhesion and activation on each substrate. Western blot analysis as well as single protein studies revealed that the dominant "adhesive proteins" [fibrinogen (Fg), fibronectin (Fnc), and vitronectin (Vnc)] were adsorbed on two of the SMM-containing PEUs in lower amounts relative to unmodified base. Platelet adhesion and activation data further highlighted the differences among the various substrates. It was shown that the unmodified base had a higher number of adhered platelets relative to the SMM-modified surfaces, and that of the SMM-containing substrates, which showed the lowest levels of adhesive proteins also, exhibited significantly lower platelet densities. Close morphological examination further revealed that platelets residing on these latter substrates were not appreciably activated. Based on the current evidence, it is believed that the fluorinated SMMs demonstrate good potential for the development of surfaces with minimal thrombogenic character in in vivo applications.

Adsorption↗
PubMed1982

Sulfonated poly(vinylidene fluoride) as a biomaterial: immobilization of urokinase and biocompatibility.

The adsorption of urokinase (UK) on sulfonated poly(vinylidene fluoride) (PVDF) films was examined. The amount of adsorbed UK on sulfonated PVDF films increased linearly with the degree of the ion exchange capacity (IEC) of sulfonated film. Moderately sulfonated PVDF film (IEC = 0.25 meq/g) adsorbed 3 IU/cm2 UK, and highly sulfonated film (IEC = 0.54 meq/g) adsorbed 5 IU/cm2 UK. All UK-immobilized PVDF films were active for ten weeks. The presence of the sulfonated films in the culture of rat lymphocytes did not result in any change of their viability. The implant of the film (IEC greater than 0.48 meq/g) into the subcutaneous layer of rats resulted in the cell infiltration composed of lymphocytes and plasma cells or the blastogenesis within the surrounding tissues of the implant and the regional lymph nodes. On the contrary, the implant of the films (IEC less than 0.27 meq/g) did not exert any visible changes, indicating that the lightly sulfonated films may be applicable in the sense of biocompatibility in vivo.

Animals↗
PubMedDate not supplied

Wire-induced osteogenesis in marrow.

Although it has been reported, in observations connected to electrically stimulated bone repair, that intramedullary electrodes not attached to any electrical source can also induce osteogenesis, there has been only one systematic attempt to study this effect per se. We have extended these studies, implanting selected metal and plastic wires longitudinally into the medullary diaphyses of rat femora. Atomic absorption analysis was used for the first time in analyzing for medullary calcium. This technique and the histologic evaluation clearly indicate that osteogenesis occurs within 2 weeks after this wire implantation. Osteogenesis was not observed when the wire was immediately removed after the original trauma of wire insertion.

Animals↗
PubMed1992

Influence of the substrate binding characteristics of fibronectin on corneal epithelial cell outgrowth. Student Research Award in the Doctoral Degree Candidate Category, Fourth World Biomaterials Congress (18th annual meeting of the Society for Biomaterials), Berlin, Germany, April 24-28, 1992.

The outgrowth of corneal epithelial cells onto a polymeric substrate is expected to be the primary event in the epithelialization of a synthetic corneal graft. Circular corneal buttons (5 mm) were punched from excised rabbit corneas and placed onto bare substrates or substrates preadsorbed with fibronectin (fn), albumin, or binary mixtures of both fn and albumin. Cell outgrowth areas were measured after culturing the buttons for 4 days in serum-free medium. Fibronectin adsorption to the materials was measured from pure and binary solutions with 125I-radiolabeled fibronectin. A parameter thought to be related to the binding strength of fn to polymeric substrates was measured in parallel experiments by partial elution of the adsorbed fn by 3% sodium dodecyl sulfate (SDS). Following pure solution fibronectin adsorption a range of outgrowth areas was measured (from 0.86 +/- 0.03 cm2 for glass to 1.49 +/- 0.03 cm2 for TCPS). On all of the materials tested cell outgrowth areas increased following fn preadsorption and decreased following albumin preadsorption relative to bare surfaces (p less than 0.05). Following preadsorption with binary protein mixtures cell outgrowth areas increased with fibronectin adsorption, however, the outgrowth areas were not determined solely by the concentration of fn adsorbed onto the surfaces. This result suggested that the biological efficiency of the adsorbed fibronectin was substrate-dependent. When the cell outgrowth data were cross-plotted against fn retention following SDS elution, the outgrowth areas were found to increase along with increases in fn retention. Based on these data we suggest that epithelial cell outgrowth may be partially governed by the tightness of binding between the fn molecules and the underlying substrate.

Adsorption↗