PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Pyrolysis”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

Solid state synthesis of tungsten carbide nanorods and nanoplatelets by a single-step pyrolysis.

We report a simple and efficient single-step synthesis of tungsten carbide nanorods and nanoplatelets by direct pyrolysis of a hybrid composite material of 12-tungstophosphoric acid and hexadecyltrimethylammonium bromide in a closed Swagelok cell at 1000 degrees C. The product was characterized by XRD, TGA, SEM, TEM, XPS, and CV. The diameter of the nanorods is 30-50 nm, and the length varies from 200 to 500 nm. The size of the platelets is around 55 nm. The WC exhibits an interesting structural surface with kinks, steps, and terraces which is evidenced by HRTEM studies.

Letter↗

Theoretical studies on the structures, thermodynamic properties, detonation properties, and pyrolysis mechanisms of spiro nitramines.

Density function theory (DFT) has been employed to study the geometric and electronic structures of a series of spiro nitramines at the B3LYP/6-31G level. The calculated results agree reasonably with available experimental data. Thermodynamic properties derived from the infrared spectra on the basis of statistical thermodynamic principles are linearly correlated with the number of nitramine groups as well as the temperature. Detonation performances were evaluated by the Kamlet-Jacobs equations based on the calculated densities and heats of formation. It is found that some compounds with the predicted densities of ca. 1.9 g/cm3, detonation velocities over 9 km/s, and detonation pressures of about 39 GPa (some even over 40 GPa) may be novel potential candidates of high energy density materials (HEDMs). Thermal stability and the pyrolysis mechanism of the title compounds were investigated by calculating the bond dissociation energies (BDE) at the B3LYP/6-31G level and the activation energies (E(a)) with the selected PM3 semiempirical molecular orbital (MO) based on the unrestricted Hartree-Fock model. The relationships between BDE, E(a), and the electronic structures of the spiro nitramines were discussed in detail. Thermal stabilities and decomposition mechanisms of the title compounds derived from the B3LYP/6-31G BDE and the UHF-PM3 E(a) are basically consistent. Considering the thermal stability, TNSHe (tetranitrotetraazaspirohexane), TNSH (tetranitrotetraazaspiroheptane), and TNSO (tetranitrotetraazaspirooctane) are recommended as the preferred candidates of HEDMs. These results may provide basic information for the molecular design of HEDMs.

Journal Article↗

Generation of hydrophilic, bamboo-shaped multiwalled carbon nanotubes by solid-state pyrolysis and its electrochemical studies.

A simple, efficient, and novel method was developed for the direct preparation of hydrophilic, bamboo-shaped carbon nanotubes by the pyrolysis of ruthenium(III) acetylacetonate in a Swagelock cell is reported. The obtained product exhibits mostly bamboo-shaped, straight, periodic twisted, multiwalled carbon nanotubes possessing diameters of 50-80 nm and lengths of around 10 microm. The pyrolyzed product was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution TEM (HRTEM), Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), micro-Raman, and cyclic voltammetric techniques. HRTEM studies showed that the walls of bamboo-shaped carbon nanotubes consisted of oblique grapheme planes with respect to the tube axis. The interlayer spacing between two graphitic layers was found to be 0.342 nm. XPS measurements have suggested that as-prepared carbon nanotubes consist the surface functional groups on the surface of carbon nanotubes. The electrochemical properties of synthesized carbon nanotubes have been evaluated. Thermogravimetric analysis (TGA), IR, and cyclic voltammetric studies showed the presence of oxygen functionalities. Raman studies revealed the presence of disorder in the graphitic carbon and the presence of exposed edge plane defects in the generated carbon nanotubes for influencing the surface behavior and electrochemical properties. The electrochemical behavior of electrodes made of bamboo-shaped carbon nanotubes served for an oxygen reduction reaction.

Journal Article↗

Shock tube pyrolysis of 1,2,4,5-hexatetraene.

1,2,4,5-Hexatetraene (1245HT) is, according to theory, a key intermediate to benzene from propargyl radicals in a variety of flames; however, it has only been experimentally observed once in previous studies of the C3H3 + C3H3 reaction. To determine if it is indeed an intermediate to benzene formation, 1245HT was synthesized, via a Grignard reaction, and pyrolysized in a single-pulse shock tube at two nominal pressures of 22 and 40 bar over a temperature range from 540 to 1180 K. At temperatures T < 700 K, 1245HT converts efficiently to 3,4-dimethylenecyclobutene (34DMCB) with a rate constant of k = 10(10.16) x exp(-23.4 kcal/RT), which is in good agreement with the one calculated by Miller and Klippenstein. At higher temperatures, various C6H6 isomers were generated, which is consistent with theory and earlier experimental studies. Thus, the current work strongly supports the theory that 1245HT plays a bridging role in forming benzene from propargyl radicals. RRKM modeling of the current data set has also been carried out with the Miller-Klippenstein potential. It was found that the theory gives reasonably good predictions of the experimental observations of 1245HT, 1,5-hexadiyne (15HD), and 34DMCB in the current study and in our earlier studies of 15HD pyrolysis and propargyl recombination; however, there is considerable discrepancy between experiment and theory for the isomerization route of 1,2-hexadien-5-yne (12HD5Y) --> 2-ethynyl-1,3-butadiene (2E13BD) --> fulvene.

Journal Article↗

Synthesis and characterizations of amorphous carbon nanotubes by pyrolysis of ferrocene confined within AAM templates.

Amorphous carbon nanotubes (a-CNTs) are synthesized by pyrolysis of ferrocene confined in the nanopores of the anodic alumina membrane (AAM) and characterized by field emission scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), electron energy-loss spectroscopy (EELS), and Raman spectroscopy. It is shown that the a-CNT has an ultrathin amorphous wall (approximately 3 nm) and a relatively large diameter (approximately 50 nm), and is capsulated with iron oxide nanoparticles. It is found that the growth of the a-CNTs is governed mainly by the template limitation effect. Electrical transport measurements on individual a-CNTs demonstrate that the a-CNT may be connected with electrodes via either ohmic or Schottky contacts, and the resisitivity of the a-CNTs was measured to be 4.5 x 10(-3) Omega cm.

Journal Article↗

Core-shell microspherical Ti(1-x)Zr(x)O2 solid solution photocatalysts directly from ultrasonic spray pyrolysis.

A series of Ti(1-x)Zr(x)O(2) solid solutions photocatalysts (x = 0.000, 0.045, 0.090, 0.135, and 0.180) was directly obtained by an ultrasonic spray pyrolysis method. Compared with previous methods for solid solutions, our preparation was very fast. The resulting samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, nitrogen adsorption, and UV-vis diffuse reflectance spectroscopy. The characterizations revealed core-shell spherical structures of the resulting solid solutions. We evaluated photocatalytic activities of the solid solutions on degradation of rhodamine B in aqueous solution under simulated solar light. It was found that Ti(0.91)Zr(0.09)O(2) solid solution exhibited the highest photocatalytic activity among all the as-prepared samples. Its activity was much higher than that of P25. The formation mechanism of core-shell spherical structures was proposed. Moreover, we successfully extended this method to prepare microspheres of ceria and ceria-zirconia solid solutions. We think this general method may be easily scaled up for industrial production of microspherical solid solutions photocatalysts and catalysts.

Adsorption↗

Surface functionalization of silicon nanoparticles produced by laser-driven pyrolysis of silane followed by HF-HNO3 etching.

CO2 laser induced pyrolysis of silane was used to produce silicon nanoparticles with an average diameter as small as 5 nm at high rates (up to 200 mg/h). Etching these particles with a mixture of hydrofluoric acid (HF) and nitric acid (HNO3) reduces their size and passivates their surface such that they exhibit bright visible photoluminescence (PL). This paper describes the attachment of organic molecules to hydrogen-terminated and hydroxyl-terminated surfaces of these nanoparticles. Stable particle dispersions in various solvents were obtained by treatment of hydrogen-terminated surfaces with octadecene or undecylenic acid and by treatment of hydroxyl-terminated surfaces with octadecyltrimethoxysilane. Transmission electron microscopy showed that the surface-functionalized particles were well dispersed and crystalline. FTIR spectroscopy confirmed the expected reactions of the organic molecules with the particle surfaces. Photoluminescence measurements showed that surface treatment significantly stabilized the PL properties of the nanoparticles against degradation. Size selective precipitation was applied to particle dispersions and allowed some narrowing and tuning of the PL spectrum.

Journal Article↗

Inter-strain comparison by pyrolysis mass spectrometry of Staphylococcus aureus isolates associated with nosocomial infection.

Pyrolysis mass spectrometry was used to characterise Staphylococcus aureus isolates from an outbreak of postoperative wound infections on a mixed surgical ward. The PyMS results were compared with those of phage typing. Both suggested a single strain of S. aureus, of phage type 3C, 55, 71, was responsible for six of the 13 wound infections. PyMS differentiated an isolate from a member of staff of similar phage type to the epidemic strain, which had previously been considered to be the point source for the outbreak. PyMS is a rapid and inexpensive technique for investigating nosocomial outbreaks, including those caused by S. aureus and, in this instance, was more discriminatory than phage typing.

Bacterial Typing Techniques↗

Nano-alpha-Al2O3 by liquid-feed flame spray pyrolysis.

Nanometre-sized particles of transition (t)-aluminas are important for the fabrication of high-quality alumina ceramics. Multiple tons are produced each year using a variety of gas-phase processes. The nanoparticles produced by these methods consist mainly of the undesired delta phase with some gamma- and theta-Al(2)O(3). Nano-t-aluminas should provide access to dense nano/submicrometre-grained alpha-Al(2)O(3) shapes offering significant advantages over micrometre-grained shapes. Unfortunately, polymorphism coupled with the high activation energy for nucleating alpha-Al(2)O(3) greatly impedes efforts to process dense alpha-Al(2)O(3) with controlled grain sizes, especially for submicrometre materials. Typically alpha-Al(2)O(3) nucleation within t-aluminas is sporadic rather than uniform, leading to exaggerated grain growth and vermicular microstructures without full densification (5). Thus, production of quantities of nano-alpha-Al(2)O(3) from multiple nano-t-aluminas for seeding or direct processing of alpha-Al(2)O(3) monoliths could greatly change how alpha-Al(2)O(3) components are processed. We report here that liquid-feed flame spray pyrolysis of nano-t-aluminas converts them to dispersible 30-80 nm alpha-Al(2)O(3) powders (50-85% phase transformed). Surprisingly, the powder surfaces are fully dehydrated. These powders pressureless sinter to more than 99.5% dense alpha-Al(2)O(3) with final grain sizes < or =500 nm without sintering aids.

Journal Article↗

Pyrolysis and UV photoelectron spectroscopy of bicyclo[3.2.0]hept-6-en-2-one; preparation and detection of cyclohepta-2(Z),4(E)-dien-1-one.

Flash vacuum pyrolysis of bicyclo[3.2.0]hept-6-en-2-one (1) in the source chamber of a UV photoelectron (PE) spectrometer using a CW CO2 laser as a directed heat source facilitated an electrocyclic ring expansion to yield the transient species cyclohepta-2(Z),4(E)-dien-1-one (2), the PE spectrum of which was compared to that of an authentic sample of cyclohepta-2(Z),4(Z)-dien-1-one (4) and confirmed a conrotatory ring opening of 1 that obeys the Woodward-Hoffmann rules.

Journal Article↗

Discrimination between tablet production methods using pyrolysis-gas chromatography-mass spectrometry and pattern recognition.

Wet granulation and direct compression are two processes employed in tablet preparation. In this paper, pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) is used to discriminate these processes with the help of chemometric techniques. The data analysis procedure is as follows. First, deconvolute the Py-GC-MS data of each sample into concentration profiles and spectra, and then construct a matrix with each compound corresponding to one column; those contained only in a small number of samples are then removed. Second, the main principal components are kept after excluding three variables and one sample, and further processed by Fisher discriminant analysis. Third, the resultant data are assigned to classes using unsupervised and supervised classification methods. Results from cross-validation show that only 3 of 20 samples are misclassified by the Mahalanobis distance measure.

Gas Chromatography-Mass Spectrometry↗

The cyclopropene pyrolysis story.

Cyclopropene is the last of the small strained ring hydrocarbons to have its thermal decomposition subjected to intensive investigation. This critical review describes the nearly 40 year history of this investigation largely by gas kinetic methods with chromatographic analysis. These studies have revealed that cyclopropenes can decompose by a variety of mechanisms involving diradicals, vinylcarbenes and vinylidenes. Much detailed information has been obtained about the reactivity of these intermediates which has wider implications for thermal hydrocarbon pyrolysis. Theory has also played a important role. Cyclopropene itself has been shown to be an intermediate in the allene --> propyne rearrangement. The story itself illustrates how the evolution of mechanistic understanding has been anything but straightforward.

Cyclopropanes↗

An empirical study of the effect of the variables in a flash vacuum pyrolysis (FVP) experiment.

The effect of the variation of the experimental parameters on the conversion of precursor to products in a typical flash vacuum pyrolysis (FVP) experiment was investigated empirically. Temperature-conversion plots can be used to optimise FVP conditions and their mechanistic significance is exemplified. At a given temperature, the conversion can be increased by an increase in the background pressure, or by packing a section of the furnace tube with inert material (particularly when placed at the trap end of the furnace tube) or by employing a catalyst. Despite the prevailing view that only intramolecular reactions take place by FVP, it has been shown by a 'dual-FVP' cross-over experiment that the dimerisation of benzyl radicals occurs in the gas-phase, before the cold trap, under standard conditions. However, reduction in through-put rate, increase in furnace temperature and reduction in background pressure all reduce the amount of gas-phase coupling.

Journal Article↗

Analysis of bacterial strains with pyrolysis-gas chromatography/differential mobility spectrometry.

Eight vegetative bacterial strains and two spores were characterized by pyrolysis-gas chromatography with differential mobility spectrometry (py-GC/DMS) yielding topographic plots of ion intensity, retention time, and compensation voltage simultaneously for ions in positive and negative polarity. Biomarkers were found in the pyrolysate at characteristic retention times and compensation voltages and were confirmed by standard addition with GC/MS analyses providing discrimination between Gram negative and Gram positive bacterial types, but no recognition of individual strains within the Gram negative bacteria. Principal component analysis was applied using two dimensional data sets of ion intensity versus retention time at five compensation voltages including the reactant ion peaks all in positive and negative ion polarity. Clustering was observed with compensation voltage (CV) chromatograms associated with ion separation in the DMS detector and little or no clustering was observed with the reactant ion peaks or CV chromatograms where ion separation is poor. Consistent clustering of Gram positive B. odysseyi and Gram negative E. coli in both positive and negative polarities with the reactant ion peak chromatograms and key CV chromatograms suggests common but unknown common chemical compositions in the pyrolysate.

Bacteria↗

Pyrolysis-field ionization mass spectrometry of rhizodeposits - a new approach to identify potential effects of genetically modified plants on soil organisms.

The objectives of the present study were (1) to investigate the qualitative composition of rhizodeposits leached from soils cropped with non-transgenic and genetically modified (GM) potatoes, and disclose if there were GM-specific modifications in potato rhizodeposition, and (2) to compare these results with conventional bulk parameters of microbial activity in soil. We have raised potatoes from a non-transgenic line (Solanum tuberosum L. cv. Désirée) and three GM lines, which expressed a gene for the resistance to kanamycin (DLH 9000) and a gene for T4 lysozyme (DL10 and DL12). A sandy soil placed in 340 cm3-"CombiSart" containers was used, from which the rhizodeposit was leached after a six-week growth period. The freeze-dried leachates were analyzed by pyrolysis-field ionization mass spectrometry (Py-FIMS). The Py-FI mass spectra gave detailed molecular-chemical information about the composition of leachates, indicating that the potato growth generally altered the composition of the soil solution. Moreover, a principal component analysis of the mass spectra showed differences between the leachates from the non-transgenic parent line and the GM potatoes as well as among the latter group. However, these differences in molecular composition could not be assigned to the release of T4-lysozyme into soil. Dehydrogenase activity and substrate-induced soil respiration as more common bulk parameters of soil microbial activity failed to disclose any significant effects of the various potatoes grown. The limitations of the described rhizodeposit leaching and analysis for risk assessment of GM potato cropping under field conditions are discussed critically. However, it could be concluded that the Py-FI mass spectrometric "fingerprint" can be developed as a fast, comprehensive, highly sensitive and reproducible analytical approach to discern any effects GM-crops may exert on soil ecological parameters.

Animals↗