PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “NITRIC ACID”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27Linked to original sources

Laboratory scale Clean-In-Place (CIP) studies on the effectiveness of different caustic and acid wash steps on the removal of dairy biofilms.

A laboratory scale, bench top flow system was used to partially reproduce dairy plant conditions under which biofilms form and to quantify the effectiveness of caustic and acid wash steps in reducing the number of viable bacteria attached to stainless steel (SS) surfaces. Once bacteria attached to surfaces, a standard clean-in-place (CIP) regime (water rinse, 1% sodium hydroxide at 65 degrees C for 10 min, water rinse, 1.0% nitric acid at 65 degrees C for 10 min, water rinse) did not reproducibly ensure their removal. Standard CIP effectiveness was compared to alternative cleaning chemicals such as: caustic blends (Alkazolv 48, Ultrazolv 700, Concept C20, and Reflex B165); a caustic additive (Eliminator); acid blends (Nitroplus and Nitrobrite); and sanitizer (Perform). The addition of a caustic additive, Eliminator, enhanced biofilm removal compared to the standard CIP regime and further increases in cleaning efficiency occurred when nitric acid was substituted with Nitroplus. The combination of NaOH plus Eliminator and Nitroplus achieved a 3.8 log reduction in the number of cells recovered from the stainless steel surface. The incorporation of a sanitizer step into the CIP did not appear to enhance biofilm removal. This study has shown that the effectiveness of a "standard" CIP can possibly be enhanced through the testing and use of caustic and acid blends. There are many implications of these findings, including: the development of improved cleaning regimes and improved product quality, plant performance, and economic returns.

Analysis of Variance↗

Synthesis, characterization and thermolysis studies on new derivatives of 2,4,5-trinitroimidazoles: potential insensitive high energy materials.

This paper reports the synthesis of three new derivatives of 2,4,5-trinitroimidazole namely, 1-methyl-2,4,5-trinitroimidazole (III), 1-carboethoxy-2,4,5-trinitroimidazole (V) and 1-picryl-2,4,5-trinitroimidazole (VII). The title compounds (III) and (V) were synthesized by the nitration of 1-methyl-/1-carboethoxy-(2,4,5-triiodoimidazole) (II and IV) with fuming nitric acid at 0 degrees C and (VII) was synthesized by condensation of 2,4,5-triiodoimidazole (I) with picryl chloride to obtain 1-picryl-2,4,5-triiodoimidazole (VI) followed by its nitration with fuming nitric acid at 0 degrees C. The synthesized compounds have been characterized by elemental analysis, spectral and thermal techniques. The thermolysis studies using TG-DTA revealed exothermic decomposition of the nitroimidazoles (III, V and VII) with T(max) in the temperature range of 196-225 degrees C. The energy of activation obtained for these compounds was in the range 150-170 kJ/mol. The sensitivity data obtained for the newly synthesized compounds (III, V and VII) indicated their safe nature towards external stimuli (h(50%)>100 cm; friction>36 kg) and could be potential candidates for low vulnerable applications in the futuristic systems. The theoretically predicted performance parameters suggest that 1-methyl-2,4,5-trinitroimidazole (III), exhibits higher velocity of detonation (VOD: 8.8 km/s) compared to compounds V and VII (VOD: 7.6 and 8.41 km/s, respectively).

Calorimetry, Differential Scanning↗

Investigation of microwave assisted drying of samples and evaporation of aqueous solutions in trace element analysis.

Investigations of microwave assisted drying of sample materials and microwave assisted evaporation of aqueous sample solutions and acidic digestion residues were accomplished by means of special rotors for the microwave digestion system MULTIWAVE. To check the results obtained by microwave assisted drying, the samples were also conventionally dried at 105 degrees C in an oven. The following samples have been dried: 10 g each of meat, fish, apple, cucumber, potato, mustard, yogurt, clay and marl; 1 g each of certified reference material TORT 2 (lobster hepatopancreas), BCR 278 (mussel tissue) and BCR 422 (cod muscle); 500 g garden mould. Microwave assisted drying takes 40 min for organic samples and 30 min for inorganic material. Important is a slow increase of microwave power during the first 20 min. The results agree well with conventional drying at 105 degrees C. Losses of As, Se and Hg have been investigated for 3 CRMs. Only Se shows losses in the range of 20%. Losses of As, Be, Cd, Co, Cr, Cu, Fe, Hg, Li, Mg, Mn, Mo, Ni, Pb, Sb, Se, Sr, Ti, Tl, V and Zn after evaporation of aqueous samples and acidic solutions after wet digestion, respectively, have been investigated. 50 mL aqueous solution was evaporated almost to dryness within 25 min. The recovery of Hg is 40-50%, of Se 90-95% and of the other elements 97-102%. 0.2 g each of TORT 2, BCR 278 and BCR 422 have been digested with 4 mL nitric acid and 1 mL hydrochloric acid by means of the microwave digestion system MULTIWAVE. The digestion residue was evaporated almost to dryness and dissolved again in 10 mL diluted nitric acid. In this case no element losses have been observed. The measured concentration of As, Cd, Cu, Fe, Mn, Hg, Pb, Mo, Ni, Se, Sr, V and Zn agree very well with the certified values. An important prerequisite for good recoveries is not to evaporate the solutions to complete dryness.

Acids↗

Effects of some synthetic kynurenines on brain amino acids and nitric oxide after pentylenetetrazole administration to rats.

We have previously proven that some synthetic kynurenines behave as antagonists of the N-methyl-d-aspartate receptor inhibiting neuronal subtype of nitric oxide synthase activity. We now investigate the anticonvulsant activity of four of these kynurenines in pentylenetetrazole (PTZ)-treated rats. The rats were treated with each kynurenine (10-160 mg/kg, s.c.) 30 min before PTZ administration (100 mg/kg, s.c.). Then, latency, duration and intensity of the first seizure and the percent animal survival were noted. PTZ-induced death was counteracted by high doses of kynurenines. Latency of the first seizure was significantly increased and its intensity reduced at the same doses, whereas the duration of the first seizure significantly decreased with doses of 20 mg/kg in most of the kynurenines tested. Three hours after PTZ administration, the surviving animals were sacrificed and the levels of brain amino acids and nitrite were measured. PTZ administration increased glutamate, glutamine, serine and taurine levels in different brain areas. High doses of kynurenines generally counteracted the effects of PTZ on excitatory amino acids, but they also reduced inhibitory aminoacids. However, the most consistent effect of kynurenines was the dose-dependent reduction of brain nitrite levels induced by PTZ. These results reveal a new family of anticonvulsant drugs that affect mainly to nitric oxide production in the brain.

Amino Acids↗

Collection efficiency and capacity of three samplers for acidic and basic gases.

This paper compares the collection efficiency and capacity of a coated porous metal disk with those of a silica gel tube and an impinger at the acid or basic aerosol concentration of two times the permissible exposure limitation (Taiwan IOSH, Institute of Occupational Safety and Health), relative humidity of 80 +/- 5%, and temperature of 30 +/- 3 degrees C in the laboratory. Using 5% sodium carbonate/glycerin coating, the collection efficiencies of the porous metal disk for nitric acid, hydrogen chloride, and hydrogen fluoride are found to be higher than those of the silica gel tube and the impinger when the sampling time is less than 3.0 h. The gas collection capacity of the porous metal disk coated with 5% sodium carbonate is calculated to be 3.9, 5.8, and >2.5 mg for nitric acid, hydrogen chloride, and hydrogen fluoride, respectively. For ammonia, the porous metal disk coated using 4% citric acid performs slightly better than the impinger, and the corresponding capacity is slightly greater than 33.6 mg.

Aerosols↗

Studies on the preparation and isomeric composition of 186Re- and 188Re-pentavalent rhenium dimercaptosuccinic acid complex.

The preparative conditions for 186Re(V)DMSA and 188Re(V)DMSA (DMSA = meso-dimercaptosuccinic acid), beta-emitting radiopharmaceuticals that have been shown to localize in medullary thyroid carcinoma, require modification depending on the amount of carrier rhenium and the chemical form and medium in which the rhenium is supplied. Preparative conditions are described for use with carrier-free 188ReO4- in saline, and for use with 186ReO4- in saline, sodium hydroxide or nitric acid. Preparation of 186Re(V)DMSA (carrier present up to 2 mg per 2.5 ml reaction volume) requires a DMSA:SnCl2:Re ratio of 10:5:1 at 100 degrees C for 30 min. Addition of excess nitric acid or hydrochloric acid up to a concentration of 155 mM does not reduce the yield from 100%. A commercial DMSA kit vial (e.g. Amerscan DMSA) can be used for preparation of 188Re(V)DMSA (carrier free) provided the required activity is in a volume of less than 1 ml per vial. A convenient method of concentrating the 188Re generator eluate to the required volume is described.

Isomerism↗

Effect of mechanical surface pretreatment on metal ion release.

The degree of metal ion dissolution from Ti-6Al-4V alloy hip replacement stems subjected to various mechanical and chemical surface pretreatments was analysed in vitro. High-dissolution rates were observed for nitric acid passivated samples that had been mechanically surface treated to increase the implant surface area. Significantly lower ion release levels were observed for mechanically treated samples which had been aged in de-ionised water. The application of an hydroxyapatite coating decreased the metal ion release from the nitric acid passivated samples (compared to the uncoated sample) and increased the metal ion dissolution from the aged samples. The dissolution behaviour of the samples is explained in terms of the diffusion processes occurring at the stem/solution interface and the morphological and chemical characteristics of the surface treated stems.

Alloys↗

Synthesis of regioisomeric analogues of crisamicin A.

The synthesis of bis-furonaphthopyrans 12a and 12b, regioisomeric analogues of the dimeric pyranonaphthoquinone antibiotic crisamicin A 1 is described. The key intermediate 16 was prepared via a one-pot in situ Suzuki-Miyaura homocoupling of naphthyl triflate 23 using bis(pinacolato)diboron. Oxidation of binaphthyl 16 to bis-naphthoquinone 14 was then effected with silver(II) oxide and nitric acid. Efficient double furofuran annulation of bis-naphthoquinone 14 with 2-trimethylsilyloxyfuran 8 afforded bis-furonaphthofuran adducts 13a and 13b as an inseparable 1:1 mixture of diastereomers. Oxidative rearrangement of this mixture of bis-furonaphthofuran adducts 13a and 13b using silver(II) oxide and nitric acid afforded unstable bis-furonaphthopyrans 12a and 12b also as a 1:1 mixture of diastereomers. Addition of 2-trimethylsilyloxyfuran 8 to naphthoquinone 25 afforded adduct 26 that underwent oxidative rearrangement to furonaphthopyran 27, however attempts to effect Suzuki-Miyaura homocoupling of triflates 26 and 27 to their respective dimers 13 and 12, was unsuccessful.

Anti-Infective Agents↗

Modified silver staining of nucleolar organizer regions to improve the accuracy of image analysis.

Silver staining of nucleolar organizer regions (NORs) and their subsequent quantification by image analysis are used increasingly in human pathological specimens and experimental models. Because certain conditions determined by the type of tissue and/or its fixation render AgNOR segmentation for image analysis difficult due to insufficient contrast or nonspecific silver precipitation, we propose three improvements to the original technique to overcome these difficulties. Pretreatment with 7% nitric acid produced very distinct dark brown images of AgNORs on a yellow background. The gradient of background colors allowed easy discrimination of nucleolar, nuclear and cytoplasmic structures. Seven morphometric parameters related to number, size and shape of AgNORs were evaluated quantitatively by image analysis on sections pretreated with nitric acid and on adjacent sections treated with citrate buffer in a wet autoclave according to the most widely accepted method for image analysis of AgNOR. Both methods yielded similar results. A second improvement was achieved by coating the slides with 7% celloidin solution in ethyl alcohol-ether prior to AgNOR staining and acid pretreatment. This coating prevented nonspecific silver deposition on argyrophilic bacteria and other tissue debris in human vaginal smears that could make visualizing AgNOR sites difficult. Finally, placing sections face down on the staining solution prevents the formation of nonspecific silver precipitates. These procedures can be applied together or separately according to the requirements of the material to be evaluated.

Adenocarcinoma↗

Study on size distribution of total aerosol and water-soluble ions during an Asian dust storm event at Jeju Island, Korea.

Soil dust particles transported from loess regions of the Asian continent, called Asian dust, highly influences the air quality of north-eastern Asia and the northern Pacific Ocean. In order to investigate the effects of these dust storms on the chemical composition of atmospheric aerosol particles with different size, measurements of size distributions of total aerosol and major ion species were carried out on Jeju Island, Korea during April 2001. Juju Island was chosen for the study because the levels of emissions of anthropogenic air pollutants are very low. A 5-stage cascade impactor was used to sample size-fractionated aerosol particles. Samples were analyzed for major water-soluble ions using Dionex DX-120 ion chromatograph. The average mass concentration of total aerosol was found to be 24.4 and 108.3 microg m(-3) for non-Asian dust and Asian dust periods, respectively. The total aerosol size distribution, measured during the non-Asian dust period, was bimodal, whereas the coarse particles dominated the size distribution of total aerosol during the Asian dust period. It was found that SO4(2-), NH4+ and K+ were mainly distributed in fine particles, while Cl-, NO3-, Na+, Mg2+ and Ca2+ were in coarse particles. Although SO4(2-) was mainly distributed in fine particles, during the Asian dust period, the concentrations in coarse particles were significantly increased. This indicates heterogeneous oxidation of SO2 on wet surfaces of basic soil dust particles. The NH4+ was found to exist as (NH4)2SO4 in fine particles, with a molar ratio of NH4+ to SO4(2-) of 2.37 and 1.52 for non-Asian dust and Asian dust periods, respectively. Taking into account the proximity of the sampling site to the sea, and the observed chloride depletion, coarse mode nitrate, during the non-Asian dust period, is assumed to originate from the reaction of nitric acid with sodium chloride on the surfaces of sea-salt particles although the chloride depletion was not shown to be large enough to prove this assumption. During the Asian dust period, however, chloride depletion was much smaller, indicating coarse nitrate particles were mainly produced by the reaction of nitric acid with surfaces of basic soil particles. Most chloride and sodium components were shown to originate from sea-salt particles. Asian dust aerosols, arriving at Jeju Island, contained considerable amounts of sea-salt particles as they passed over the Yellow Sea. Ca2+ was shown to be the most abundant species in Asian dust particles.

Aerosols↗

Scanning transmission electron microscopy/energy-dispersive spectroscopy analysis of the dentin adhesive interface using a labeled 2-hydroxyethylmethacrylate analogue.

In an attempt to compare the morphology of the dentin adhesive interface and the wetting and penetration of the adhesive in relation to the dentin surface, we studied four dentin adhesive systems using scanning transmission electron microscopy (STEM) and energy-dispersive spectroscopy (EDS). 2-Hydroxyethylmethacrylate (HEMA), a monomer common to many commercial dentin adhesive systems, was altered to produce a thiolated analogue (HETMA). Sulfur, traceable by EDS and STEM, was substituted for the oxygen atom in the backbone of the HEMA molecule. The resulting analogue, with solubility parameters and other wetting and physical properties very similar to those of HEMA, was applied to four sets of tooth specimens, each pre-treated with a different primer or etchant. Three separate pre-treatments--nitric acid, maleic acid, and citric acid/ferric chloride--created a demineralized zone approximately 1 to 3 microns thick at the dentin surface. The HETMA was found to permeate freely into this zone when either of the latter two pre-treatments was used. However, the band of dentin that was demineralized by the nitric acid pre-treatment appeared impermeable to the HETMA. The fourth pre-treatment, an alcohol-based solution including the phosphorus acid ester PENTA and HEMA, modified the smear layer of the tooth slightly and did not appear to demineralize the dentin. HETMA applied to the specimens pre-treated with PENTA and HEMA was clearly in intimate contact with the dentin or modified smear layer; however, it did not penetrate or diffuse into these areas. It did flow into the dentinal tubules, as was also evident with each of the other systems. It was concluded that the acid pre-treatment of the dentin greatly influenced the wetting behavior of the dentin adhesive and thus could substantially affect the resultant bond strength of the dentin adhesive systems.

Acid Etching, Dental↗

Europium(III) interaction with a polyaza-aromatic extractant studied by time-resolved laser-induced luminescence: a thermodynamical approach.

The 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridines (DATPs) belong to a new family of extracting agents recently developed in the framework of nuclear fuel reprocessing. These molecules exhibit exceptional properties to separate actinides(III) from lanthanides(III) in nitric acid solutions. In a previous work, the use of electrospray ionization mass spectrometry (ESI-MS) provided data such as stoichiometries and conditional stability constants of various DATP complexes with europium and evidenced the unusual capability of DiPTP [bis(di-iso-propyltriazinyl)pyridine] ligand to form 1:3 complexes in nitric acid solution. This latter result has then been further investigated by considering DiPTP complexation features with the complete lanthanide family. Moreover, a complementary study of equilibria in solution with a non intrusive technique such as time-resolved laser-induced luminescence (TRLIL) seemed quite promising to determine thermochemical data such as enthalpy and entropy variations associated with the complexation reaction between Eu(III) and DiPTP. Furthermore, this TRLIL study may also allow ensuring that the observations made on mass spectra actually reflected the equilibrium in solution and not an intermediate state between liquid phase and gaseous phase. The investigation of europium(III) complexation with DiPTP by TRLIL described in this paper first led to highlight the exclusive formation of a 1:3 complex between europium(III) and the DiPTP ligand, specificity already pointed out by ESI-MS. Two different calculation methods, using either luminescence spectra and luminescence decay curves, have then been used to measure the conditional stability constant of the [Eu(DiPTP)(3)](3+) complex. Both methods gave similar results (log beta3(app)= 14.3 +/- 0.6 at pH 2.8) in good agreement with the one previously reported in ESI-MS studies (log beta3(app)= 14.0 +/- 0.6 at pH 2.8). Moreover, while considering the influence of temperature on the value of the stability constant, it was possible to estimate the enthalpy (DeltaH(beta3) = -29 +/- 3 kJ mol(-1) at pH 2.8) and entropy variations (DeltaS(beta3) = 173 +/- 10 J K(-1) mol(-1) at pH 2.8) associated with the [Eu(DiPTP)(3)](3+) complex formation.

Journal Article↗

The cannabinoid receptor antagonist SR-141716A induces penile erection in male rats: involvement of paraventricular glutamic acid and nitric oxide.

The cannabinoid CB1 receptor antagonist SR141716A (0.5, 1 and 2 microg) induces penile erection when injected into the paraventricular nucleus of male rats. The pro-erectile effect of SR 141716A occurs concomitantly with an increase in the concentration of NO2- and NO3- in the paraventricular dialysate obtained by means of intracerebral microdialysis. Both penile erection and NO2- increase induced by SR 141716A were reduced by the prior injection into the PVN of the cannabinoid CB1 agonists WIN 55,212-2 (5 microg) or HU 210 (5 microg), given into the paraventricular nucleus at doses unable to induce penile erection or to modify NO2- concentration. SR 141716A responses were also reduced by nitro-L-arginine methylester (20 microg), a non-selective NO synthase inhibitor, S-methyl-L-thiocitrulline (20 microg), a selective neuronal NO synthase inhibitor, the excitatory amino acid NMDA receptor antagonist dizocilpine ((+)MK 801) (1 microg), or the GABAA receptor agonist muscimol (0.2 microg) injected into the PVN 15 min before SR 141716A. In contrast, the inducible NO synthase inhibitor L-N(6)-(1-iminoethyl)lysine (20 microg), the GABAB receptor agonist baclofen (0.2 microg), the mixed dopamine receptor antagonist cis-flupenthixol (10 microg), and the oxytocin receptor antagonist d(CH2)5Tyr(Me)-Orn8 -vasotocin (1 microg), were ineffective. Despite its inability to reduce penile erection and NO2- increase induced by SR 141716A when injected into the PVN, d(CH2)5Tyr(Me)-Orn8 -vasotocin (1 microg) reduced almost completely penile erection without reducing paraventricular NO2- increase when injected into the lateral ventricles 15 min before SR 141716A. The present results show that SR 141716 induces penile erection by a mechanism (possibly activation of excitatory amino acid neurotransmission), which causes the activation of neuronal NO synthase in paraventricular oxytocinergic neurons mediating penile erection.

Animals↗

[A case study of the contents of radionuclides and of main chemical pollutants in the atmospheric air of Moscow].

The article contains data on monitoring the atmospheric air pollution in Moscow. Thus, the below figures are presented: beta ranges from 2.6 E-0.5 to 5.7 E-0.04 Bk/m3, airborne pollutants amount to 3-80 mkg/m3, sulfates--0.002-1.58 mkg(S)/m3, nitrates--0.05-0.75 mkg(N2)/m3 ammonium ions--0.12-1.20 mkg (N2)/m3, sulfuric dioxides--0.11-1.20 mkg (S)/m3. nitric dioxides--0.05-0.5 mlg (N2)/m3 and nitric acid--0.01-0.08 mkg (N2)/m3. The concentration of airborne pollutants exceeds the regional European level (22 mkg/m3) and that of Russia's European part (12 ... 28 mkg/m3) approximately by 1.5 times. It is noteworthy that it reaches 50 ... 70 mkg/m3 in large industrial centers of Europe. The share of sulfuric and nitric acids in the total concentration of airborne pollutants is (by weight) 13%. 0.8 g of sulfur per m2/year and 0.34 g of nitrogen per m2/year fall in the area of Sport-and-Recreation Complex No. 3 with precipitations; the average total beta-activity of atmospheric precipitations amounts to 1.2 Bk/m2 per day. An analysis of relationships between the air dustiness, the ashes samples' weight (of the air) and cuvette (precipitations) is indicative of their direct and tense correlation: the correlation coefficient between dust and ashes samples is 0.716, and between dust and ashes samples of cuvettes--0.559. At the same time, an extremely weak correlation should be pointed out between air dustiness and the total beta-activity of samples--the correlation coefficient is 0.184 (during a warm year season), as well as between dustiness and the beta-activity of cuvettes--0.346.

Air↗

Observations on the measurement of total antimony and antimony species in algae, plant and animal tissues.

This paper describes our experiences with undertaking measurements of total antimony and antimony speciation in algae, plant and animal tissues. Digestion with nitric acid alone is suitable to release antimony from animal tissues. When organisms have high silica contents, e.g. some plants and algae, the addition of tetrafluorboric acid is required to dissolve silica as some antimony is retained by silica in extracts. Antimony in digested extracts is present as Sb5+ and hydride generation procedures can be used to determine total antimony concentrations, as total antimony in extracts will not be under estimated. Relatively non-aggressive solvents such as water, dilute nitric acid, sodium hydroxide and enzymes remove highly variable amounts of antimony (2-84%) from algae, plant and animal tissues. Addition of Sb3+ and Sb5+ to NIST CRM 1572 Citrus Leaves, pre- and post-extraction with water showed that Sb3+ is oxidised to Sb5+ while Sb5+ is redistributed amongst binding sites giving rise to artefacts. DOLT-2 and algae extracts indicated the presence of only inorganic antimony. A moss sample had inorganic antimony and a number of unknown antimony species in extracts. Future studies should explore the nature of the binding of antimony in tissues as solvents commonly used to extract metals and metalloids from algae, plant and animal tissues are not appropriate.

Animals↗

Trivalent lanthanide interactions with a terdentate bis(dialkyltriazinyl)pyridine ligand studied by electrospray ionization mass spectrometry.

The 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridines (DATPs) belong to a new family of extracting agents recently developed in the framework of nuclear fuel reprocessing. These molecules exhibit exceptional properties to separate actinides(III) from lanthanides(III) in nitric acid solutions. A previous work showed that electrospray ionization mass spectrometry (ESI-MS) is a reliable technique to provide solution data such as stoichiometries and conditional stability constants of various DATP complexes with europium and evidenced the unusual capability of DiPTP [bis(di-iso-propyltriazinyl)pyridine] ligand to form 1:3 complexes in nitric acid solution. This latter result is further investigated by considering DiPTP complexation features with the complete lanthanide family. As a starting point of the experimental procedure used for stability constant evaluation, the intensity distribution of ions detected by ESI-MS is studied for solutions containing Ln(NO(3))(3) in water/methanol (1:1 v/v) with the pH value set at 2.8 and 4.6 by HNO(3) additions. At pH 2.8, the nitrate anions are found to prevent lanthanides from processes occurring within the ion source: redox phenomena or gas-phase reactions with methanol which give species such as [Ln(MeO)(2)](+). Thus, the total intensity of MS signals from [Ln(NO(3))(2)(H(2)O)(p)(MeOH)(n)](+) ions is found proportional to the metal ion concentration. At pH 4.6, with lower nitrate concentration, the nature of the species identified on mass spectra depends on the electronic properties of the lanthanide elements. It is shown that Ln(III) complexation with DiPTP leads to the exclusive formation of 1:3 complexes with the whole lanthanide series which may be due not only to the hydrophobic exterior of the ligand but also to the unusual electronic density distribution in DATP ligands as compared with other aza-aromatic ligands. The conditional stability constants of the 1:3 lanthanide(III) complexes with DiPTP have been determined at pH 2.8 and are found to increase almost regularly from La (log beta(3)(app) = 11.7 +/- 0.1) to Lu (log beta(3)(app) = 16.7 +/- 0.8). Moreover, the kinetic stability of the gas-phase 1:3 complexes obtained by electrospray has been investigated by energy-resolved collision-induced dissociation and provides useful information on the bonding and structure.

Journal Article↗

Quasiclassical trajectory simulations of OH(v) + NO2 --> HONO2* --> OH(v') + NO2: capture and vibrational deactivation rate constants.

Quasiclassical trajectory calculations are used to investigate the dynamics of the OH(v) + NO(2) --> HONO(2) --> OH(v') + NO(2) recombination/dissociation reaction on an analytic potential energy surface (PES) that gives good agreement with the known structure and vibrational frequencies of nitric acid. The calculated recombination rate constants depend only weakly on temperature and on the initial vibrational energy level of OH(v). The magnitude of the recombination rate constant is sensitive to the potential function describing the newly formed bond and to the switching functions in the PES that attenuate inter-mode interactions at long range. The lifetime of the nascent excited HONO(2) depends strongly not only on its internal energy but also on the identity of the initial state, in disagreement with statistical theory. This disagreement is probably due to the effects of slow intramolecular vibrational energy redistribution (IVR) from the initially excited OH stretching mode. The vibrational energy distribution of product OH(v') radicals is different from statistical distributions, a result consistent with the effects of slow IVR. Nonetheless, the trajectory results predict that vibrational deactivation of OH(v) via the HONO(2) transient complex is approximately 90% efficient, almost independent of initial OH(v) vibrational level, in qualitative agreement with recent experiments. Tests are also carried out using the HONO(2) PES, but assuming the weaker O-O bond strength found in HOONO (peroxynitrous acid). In this case, the predicted vibrational deactivation efficiencies are significantly lower and depend strongly on the initial vibrational state of OH(v), in disagreement with experiments. This disagreement suggests that the actual HOONO PES may contain more inter-mode coupling than found in the present model PES, which is based on HONO(2). For nitric acid, the measured vibrational deactivation rate constant is a useful proxy for the recombination rate, but IVR randomization of energy is not complete, suggesting that the efficacy of the proxy method must be evaluated on a case-by-case basis.

Journal Article↗

Comparison of closed-vessel and focused open-vessel microwave dissolution for determination of cadmium, copper, lead, and selenium in wheat, wheat products, corn bran, and rice flour by transverse-heated graphite furnace atomic absorption spectrometry.

A method is described for the determination of Pb, Cd, Cu, and Se in cereal samples. An atomic absorption spectrometer equipped with a transverse-heated graphite furnace with Zeeman background correction was used for all determinations. Sample preparation was performed by closed-vessel microwave digestion using nitric acid and focused openvessel microwave digestion using nitric acid-hydrogen peroxide. Both techniques were evaluated by using 15 cereal reference materials and comparing results with certified or reference values for each element. Cereal reference standards obtained from the Community Bureau of Reference (Europe), the National Institute of Standards and Technology (USA), the National Institute for Environmental Studies (Japan), the National Research Centre for Certified Reference Materials (People's Republic of China), and the Canadian Grain Commission were used. Application of a series of t-tests, conducted according to Sidak's modified Bonerroni t-procedure, showed that both techniques yielded accurate results for cereal reference materials. Some differences from certified and reference values, however, were found for each element.

Bread↗