PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “WASTES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27Linked to original sources

[Radiation management for infectious waste from nuclear medicine studies].

An industrial waste management service has refused to collect medical waste from our hospital owing to radioactive contamination found in the waste in July 2000. An investigation revealed that the "three-way stopcock" and handling diapers used for radioisotope examination were the radioactive contaminants. We therefore reconsidered the system of medical waste maintenance especially for radioactive materials. Since February 2001, we have resumed radiation maintenance by following the manual for the handling diapers of patients administered radiopharmaceuticals issued by five organizations associated with JRS, JSRT, JSNM, JSNMT, and JARPM. A major change was to check the radioactive waste at the individual departments and at a centralized check system. This eliminated the problem of dumping radioactive material into medical waste as well as resolving the concerns of the industrial waste management service.

Containment of Biohazards↗

In vivo genotoxic effects of industrial waste leachates in mice following oral exposure.

Contamination of ground water by industrial waste poses potential health hazards for man and his environment. The improper disposal of toxic wastes could allow genotoxic chemicals to percolate into ground waters, and these contaminated ground waters may produce toxicity, including mutation and eventually cancer, in exposed individuals. In the present study, we evaluated the in vivo genotoxic potential of leachates made from three different kinds of industrial waste (tannery waste, metal-based waste, and waste containing dyes and pigments) that are disposed of in areas adjoining human habitation. Three different doses of test leachates were administered by oral gavage for 15 consecutive days to Swiss albino mice; their bone marrow cells were examined for chromosome aberrations (CAs), micronucleated polychromatic erythrocytes (MNPCEs), and DNA damage using the alkaline Comet assay. Exposure to the leachates resulted in significant (P < 0.05 or P < 0.001) dose-dependent increases in chromosome and DNA damage. Fragmented chromosomes and chromatid breaks were the major CAs observed. Chemical analysis of the leachates indicated that chromium and nickel were elevated above the limits established by health organizations. The highest levels of genotoxicity were produced by the metal-based leachate and the tannery-waste leachate, while the dye-waste leachate produced weaker genotoxic responses. The cytogenetic abnormalities and DNA damage produced by the leachates indicate that humans consuming water contaminated with these materials are at increased risk of developing adverse health consequences.

Administration, Oral↗

Management of old landfills by utilizing forest and energy industry waste flows.

The lack of landfill capacity, forthcoming EU waste disposal and landfill management legislation and the use of non-renewable and energy intensive natural resources for the end-treatment of old landfills increase pressures to develop new landfill management methods. This paper considers a method for the end-management of old landfills in Finland, which is based on the utilization of forest and paper industry waste flows, wastes from paper recycling (de-inking) and wastes from forest industry energy production. Fibre clay wastes from paper mills, de-inking sludges from de-inking of recovered waste paper and incineration ash from forest industry power plants serve to substitute the use of natural clay for the building of landfill structures for closed landfills. Arguably, this method is preferable to existing practices of natural clay use for landfill building, because it (1) substitutes non-renewable natural clay, (2) consumes less energy and generates less CO2 emissions than the use of natural clay, and (3) eliminates considerable amounts of wastes from paper production, paper consumption and from forest industry energy production. Some difficulties in the application of the method are considered and the waste flow utilization is incorporated into a local forest industry recycling network.

Aluminum Silicates↗

Future solutions for the treatment and disposal of hazardous wastes in China.

The current status of the treatment and disposal of hazardous wastes in China is summarized on the basis of the results of the Declaring and Registration Project initiated nationally in 1995. A principle framework for the sound management of hazardous wastes is proposed, which includes three levels of technical solutions. Large-scale enterprises are encouraged to recycle, to treat, and to dispose of wastes by means of constructing facilities, and to have their extra capacities available to the public for a reasonable fee. Municipal governments, provincial governments, and the Central Government are to plan and construct centralized facilities to recycle, treat, and dispose of wastes. For a solution at the manufacturing level, recycling is identified as the main approach. Centralized facilities at the municipal level will mainly focus on special wastes that are unsuitable to transport and store, such as hospital waste, and for the technical solution at this level, incineration and recycling are identified as the main approaches. For the technical solution at the provincial and national levels, landfill and incineration are identified as the main approaches. Based on this principle and the current available data on hazardous wastes, a preliminary plan for the spatial distribution of cross-provincial centralized treatment and disposal facilities of hazardous wastes is presented. The construction of approximately nine cross-provincial comprehensive facilities is proposed. A priority list for the construction of these planned facilities is also presented.

China↗

The genotoxicity of industrial wastes and effluents.

A review of the literature published on the genotoxicity of industrial wastes and effluents using short-term genetic bioassays is presented in this document. The importance of this task arises from the ubiquity of genotoxic compounds in the environment and the need to identify the sources of contamination so that efforts aimed at control and minimization can be implemented. Of even greater significance is the immediate concern for the welfare of human health and the environment. Subheadings of this document include a description of the genetic bioassays that have been used to test industrial wastes, a compendium of methods commonly used to prepare crude waste samples for bioassay, and a review of the genetic toxicity of wastes and effluents. Wastes and effluents have been grouped according to industrial source. Major categories include chemical and allied products, pulp and paper manufacturing, defense and munitions, petroleum refining, primary metal industries, and miscellaneous industrial manufacturers. Within each industrial category, a synopsis of individual genetic toxicity studies is presented, followed by an interpretation of results on a comprehensive, industry-wide basis. In this evaluation, a discussion of the types and extent of genotoxic damage caused by a particular set of wastes is presented, and potential sources of genotoxic activity are identified. Concluding the document is a commentary, which discloses potential shortcomings in the way in which current legislation protects human heath and the environment from the release of genotoxic substances via industrial wastes and effluents. It also provides an assessment of the genotoxic burden that industrial wastes place on the environment.

Industrial Waste↗

Toxicological evaluation of complex industrial wastes: implications for exposure assessment.

We evaluated a variety of short-term bioassays to construct a battery of tests that could be used for assessing the biological effects of potentially hazardous complex industrial wastes. Ten samples were studied for hepatotoxicity; these samples and an additional 5 were studied for mutagenicity. Although the data are limited to these samples, the results suggest that the Salmonella assay (strain TA98) or a prophage-induction assay (both in the presence of S9) in combination with determination of relative liver weight and levels of a set of serum enzymes in rats may provide a battery of tests suitable to characterize complex industrial wastes for mutagenic and hepatotoxic potential. The biological activities exhibited by the wastes were not readily predicted by the chemical profiles of the wastes, emphasizing the importance of characterizing potentially hazardous complex industrial wastes by both chemical and biological means. DNA from liver, lung and bladder of rats exposed to some of the wastes was analyzed by the 32P-postlabeling technique for the presence of DNA adducts. A waste that produced mutagenic urine produced a DNA adduct in bladder DNA. The implications of this approach for assessment of exposure to complex hazardous waste mixtures are discussed.

Animals↗

Removal of multiple nitrogenous wastes by Aspergillus niger in a continuous fixed-slab reactor.

A biofilter reactor, to which is attached a large variety of microorganisms, can be employed to treat circulating water in an intensive aquaculture system. Some nitrogen-containing wastes, such as ammonium and nitrite, are toxic to the aquatic organisms. The removal rates of the nitrogenous wastes are regarded as indices for the efficiency of treatment by biofilters. In this study, a fungus that was characterized as being able to remediate multiple nitrogenous wastes was identified as Aspergillus niger NBG5. In a continuous fixed-slab reactor, the heterotrophic fungus utilized ammonium, nitrite, protein, and glucose simultaneously. The fungus assimilated ammonium, nitrite and protein at rates of 0.247, 0.07 and 0.096 g-N/g-cell/day, respectively, at 22 degrees C. The remediation rates of ammonium nitrogenous wastes decreased by a factor of eight at 35 degrees C, while the specific growth rates slightly increased. For nitrogenous wastes, ammonium was a preferred substrate but its rate of consumption declined significantly as temperature increased. The nitrogen consumption rates were inconsistent with the cell yields at high temperature. Further analysis of consumption ratios of C/N revealed that cells grew predominantly from the carbon at high temperature. The A. niger NBG5 consumed glucose rapidly at specific rates of 2-2.5 g-C/g-cell/day at 35 degrees C in the presence of ammonium and nitrite; while sluggish consumption of glucose was observed in the protein substrate. The protein could serve as an alternative carbon source. Further ANOVA statistical analysis with P < 0.05 revealed no significant effects of temperature on the specific growth rates of A. niger on the SG-NH4 and milk-protein substrates, whereas significant effects on the C/N ratio at culture temperatures higher than 25 degrees C were observed. These findings indicated that the carbon utilization rate increased with high temperature, whereas nitrogen utilization increased as temperature declined. A suitable operational temperature was suggested, depending upon the amount of waste contents of C/N. A high temperature stimulates the use of carbon waste, while a low temperature favors remediation of all nitrogenous wastes.

Analysis of Variance↗

Solid waste generation from oil and gas industries in United Arab Emirates.

Solid wastes generated from oil and gas industrial activities are very diverse in their characteristics, large in their amounts and many of which are hazardous in nature. Thus, quantifying and characterizing the generated amounts in association with their types, classes, sources, industrial activities, and their chemical and biological characteristics is an obvious mandate when evaluating the possible management practices. This paper discusses the types, amounts, generation units, and the factors related to solid waste generation from a major oil and gas field in the United Arab Emirates (Asab Field). The generated amounts are calculated based on a 1-year data collection survey and using a database software specially developed and customized for the current study. The average annual amount of total solid waste generated in the studied field is estimated at 4061 t. Such amount is found equivalent to 650 kg/capita, 0.37 kg/barrel oil, and 1.6 kg/m3 of extracted gas. The average annual amount of hazardous solid waste is estimated at 55 t and most of which (73%) is found to be generated from gas extraction-related activities. The majority of other industrial non-hazardous solid waste is generated from oil production-related activities (41%), The present analysis does also provide the estimated generation amounts per waste type and class, amounts of combustible, recyclable, and compostable wastes, and the amounts dumped in uncontrolled way as well as disposed into special hazardous landfill facilities. The results should help the decision makers in evaluating the best alternatives available to manage the solid wastes generated from the oil and gas industries.

Conservation of Natural Resources↗

Incineration of municipal and assimilated wastes in France: assessment of latest energy and material recovery performances.

Incineration has an important place in waste management in France. In 2003, around 130 incineration plants have treated 12.6 Mt of non-dangerous waste, mainly composed of household waste (10.8 Mt), non-dangerous waste from industry, business, services (1.0 Mt), sewage sludge (0.2 Mt) or clinical waste (0.1 Mt). The incineration of these wastes generated 3.0 Mt of bottom ash of which 2.3 Mt were used for roads construction and 0.2 Mt of ferrous and non-ferrous metal were recycled. It also produced 2,900,000 MWh of electricity, of which 2,200,000 MWh were sold to Electricité de France (EDF) and 9,100,000 MWh of heat, of which 7,200,000 MWh were sold to private or public users. These French incinerators of non-hazardous waste are currently being thoroughly modernized, thus making possible the consolidation and the enhancement of their environmental and energy performance. This process is related to the implementation of the European Directive 2000/76/CE whose expiration date is 28 December 2005. Upon request of ADEME, the engineering company GIRUS has realised the first technical and economical evaluation of works necessary to bring incinerators into compliance. The financial estimations, carried out in 30 June 2003, show that the investments to be devoted could reach 750 million euros. This assessment shed new light on the situation of non-hazardous waste incinerators, including an identification and a rank ordering for each incinerator of the most frequent and the most complex non-conformities to be solved in term of cost and delay. At last, this assessment gives the solutions for each non-compliance.

Energy Transfer↗

A systems analysis tool for construction and demolition wastes management.

Managing construction and demolition (C&D) wastes has challenged many municipalities with diminishing waste disposal capacity. Facing such challenges, the Massachusetts Department of Environmental Protection proposed a policy restricting the landfill disposal of certain C&D waste materials, if unprocessed. This research is to study the potential economic impact of such restriction on construction contractors and C&D waste processors. A spreadsheet-based systems analysis model has been developed to assist the cost-benefit evaluation for various C&D waste management scenarios. The model, developed based on the mass balance principle, is designed to track a C&D waste stream through the various stages of a waste management system, i.e. generation, source separation, processing, recycling, and final disposal. This model, by incorporating the material flow data with the cost/revenue data associated with each management activity, can then provide an economic analysis for a proposed C&D waste management scenario. A case study illustrating the application of this model for Massachusetts is also presented.

Conservation of Natural Resources↗

Alternatives for the treatment and disposal of healthcare wastes in developing countries.

Waste production in healthcare facilities in developing countries has brought about a variety of concerns due to the use of inappropriate methods of managing the wastes. Inappropriate treatment and final disposal of the wastes can lead to adverse impacts to public health, to occupational health and safety, and to the environment. Unfortunately, most economically developing countries suffer a variety of constraints to adequately managing these wastes. Generally in developing countries, few individuals in the staff of the healthcare facility are familiar with the procedures required for a proper waste management program. Furthermore, the management of wastes usually is delegated to poorly educated laborers who perform most activities without proper guidance and insufficient protection. This paper presents some of the most common treatment and disposal methods utilized in the management of infectious healthcare wastes in developing countries. The methods discussed include: autoclave; microwave; chemical disinfection; combustion (low-, medium-, and high-technology); and disposal on the ground (dump site, controlled landfill, pits, and sanitary landfill). Each alternative for treatment and disposal is explained, including a description of the types of wastes that can and cannot be treated. Background information on the technologies also is included in order to provide information to those who may not be familiar with the details of each alternative. In addition, a brief presentation of some of the emissions from each of the treatment and disposal alternatives is presented.

Developing Countries↗

Mechanical-biological waste treatment and the associated occupational hygiene in Finland.

A special feature of waste management in Finland has been the emphasis on the source separation of kitchen biowaste (catering waste); more than two-thirds of the Finnish population participates in this separation. Source-separated biowaste is usually treated by composting. The biowaste of about 5% of the population is handled by mechanical-biological treatment. A waste treatment plant at Mustasaari is the only plant in Finland using digestion for kitchen biowaste. For the protection of their employees, the plant owners commissioned a study on environmental factors and occupational hygiene in the plant area. During 1998-2000 the concentrations of dust, microbes and endotoxins and noise levels were investigated to identify possible problems at the plant. Three different work areas were investigated: the pre-processing and crushing hall, the bioreactor hall and the drying hall. Employees were asked about work-related health problems. Some problems with occupational hygiene were identified: concentrations of microbes and endotoxins may increase to levels harmful to health during waste crushing and in the bioreactor hall. Because employees complained of symptoms such as dry cough and rash or itching appearing once or twice a month, it is advisable to use respirator masks (class P3) during dusty working phases. The noise level in the drying hall exceeded the Finnish threshold value of 85 dBA. Qualitatively harmful factors for the health of employees are similar in all closed waste treatment plants in Finland. Quantitatively, however, the situation at the Mustasaari treatment plant is better than at some Finnish dry waste treatment plants. Therefore is reasonable to conclude that mechanical sorting, which produces a dry waste fraction for combustion and a biowaste fraction for anaerobic treatment, is in terms of occupational hygiene better for employees than combined aerobic treatment and dry waste treatment.

Adult↗

A GIS based transportation model for solid waste disposal--a case study on Asansol municipality.

Uncontrolled growth of the urban population in developing countries in recent years has made solid waste management an important issue. Very often, a substantial amount of total expenditures is spent on the collection of solid waste by city authorities. Optimization of the routing system for collection and transport of solid waste thus constitutes an important component of an effective solid waste management system. This paper describes an attempt to design and develop an appropriate storage, collection and disposal plan for the Asansol Municipality Corporation (AMC) of West Bengal State (India). A GIS optimal routing model is proposed to determine the minimum cost/distance efficient collection paths for transporting the solid wastes to the landfill. The model uses information on population density, waste generation capacity, road network and the types of road, storage bins and collection vehicles, etc. The proposed model can be used as a decision support tool by municipal authorities for efficient management of the daily operations for transporting solid wastes, load balancing within vehicles, managing fuel consumption and generating work schedules for the workers and vehicles. The total cost of the proposed collection systems is estimated to be around 80 million rupees for the fixed cost of storage bins, collection vehicles and a sanitary landfill and around 8.4 million rupees for the annual operating cost of crews, vehicles and landfill maintenance. A substantial amount (25 million rupees/yr) is currently being spent by AMC on waste collection alone without any proper storage/collection system and sanitary landfill. Over a projected period of 15 yr, the overall savings is thus very significant.

Costs and Cost Analysis↗

The treatment of infectious waste arising from home health and medical care services: present situation in Japan.

The management of waste materials arising from home health and medical care services (HHMC wastes) in Japan is now receiving greater attention from governmental workers dealing with general household waste materials. In general, HHMC waste materials are collected in a mixed form, transported and disposed of along with municipal solid wastes. As a result, municipal workers are suffering needle stick accidents so that infections associated with HHMC waste materials may occur. The collection and transportation by patients and their families of HHMC waste materials with sharp-edges, such as injection needles, to medical-related facilities can prevent municipal workers from experiencing needle-prick accidents. One of the most important strategies for medical-related facilities is hence the education of patients and their families. Improved rules for handling HHMC waste materials are essential for the safe and effective management.

Data Collection↗

Use of selected waste materials in concrete mixes.

A modern lifestyle, alongside the advancement of technology has led to an increase in the amount and type of waste being generated, leading to a waste disposal crisis. This study tackles the problem of the waste that is generated from construction fields, such as demolished concrete, glass, and plastic. In order to dispose of or at least reduce the accumulation of certain kinds of waste, it has been suggested to reuse some of these waste materials to substitute a percentage of the primary materials used in the ordinary portland cement concrete (OPC). The waste materials considered to be recycled in this study consist of glass, plastics, and demolished concrete. Such recycling not only helps conserve natural resources, but also helps solve a growing waste disposal crisis. Ground plastics and glass were used to replace up to 20% of fine aggregates in concrete mixes, while crushed concrete was used to replace up to 20% of coarse aggregates. To evaluate these replacements on the properties of the OPC mixes, a number of laboratory tests were carried out. These tests included workability, unit weight, compressive strength, flexural strength, and indirect tensile strength (splitting). The main findings of this investigation revealed that the three types of waste materials could be reused successfully as partial substitutes for sand or coarse aggregates in concrete mixtures.

Construction Materials↗

Skeletal muscle studies in patients with HIV-related wasting syndrome.

Previous reports have suggested that HIV-related wasting syndrome may be considered as a form of myopathy. The aim of the present study was to investigate histopathological muscle changes in HIV-related wasting syndrome in order to know if there is a common substrate and whether muscle plays a primary or secondary role in its development. Patients with wasting syndrome diagnosed by Centers for Disease Control (CDC) criteria were prospectively evaluated. Clinical, analytical, nutritional, anthropometrical and muscular data were recorded. The patients were subdivided into two groups: group A was constituted by patients in whom wasting syndrome was the AIDS-defining illness, and group B by patients in whom AIDS diagnosis was previously made. In all cases muscle biopsy was performed and processed for conventional stainings and histochemical reactions. Thirty patients were included (group A, 12; group B, 18). Clinical, analytical, nutritional and anthropometrical data did not essentially differ between the two groups. All patients were malnourished with respect to controls. Histopathological findings in muscle biopsy were heterogeneous and similar in both groups, except for HIV-related myopathies, which were more frequently seen in the patients from group A (P=0.05). In five cases (17%) an unsuspected and potentially treatable myopathy was diagnosed. Patients with polyarteritis nodosa (two) or polymyositis (one) were treated with prednisone, which improved their wasting syndrome. By contrast, patients with AZT-myopathy (two) did not improve when the drug was discontinued. We conclude that in most cases the wasting syndrome cannot be considered as a true myopathy, and probably metabolic and/or nutritional factors may account for wasting development. However, in a subset of patients muscle biopsy allows the diagnosis of a treatable myopathy leading to the improvement of wasting syndrome.

Adult↗

Effect of chlorine content in feeding wastes of incineration on the emission of polychlorinated dibenzo-p-dioxins/dibenzofurans.

This study attempts to clarify the effects of chlorine content in waste on the formation mechanisms of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in full scale incinerators by proposing and using the principal component analysis (PCA) to compare the congener profiles of PCDD/Fs in the stack flue gases of 17 emission sources, including incinerators and vehicles. Four incinerators, among these 17 emission sources, were sampled and analyzed in this study, and the data for the other 13 emission sources were selected from previous studies. These 17 emission sources can be classified into four categories, including medical waste incinerators (MWIs, H1-H5), municipal solid waste incinerators (MSWIs, M1-M8), vehicle fuel combustion (unleaded gas-fueled vehicles, UGFV; diesel-fueled vehicles, DFV, n = 2) and polyvinylchloride (PVC) facility vent combustors (PVC1 and PVC2, n = 2). PCA was conducted for these emission sources with the fractions of 17 2,3,7,8-congeners in the stack flue gases as variables to clarify the effect of chlorine content in feeding wastes on the emission of PCDD/Fs. From the results of PCA, we extrapolated that the threshold value of the chlorine content was at 0.8-1.1%, and the formation mechanisms of PCDD/Fs are influenced first by whether the chlorine content in the feeding waste is over or below the threshold value then by other factors, which furnaces or APCDs represent. When the chlorine level in the waste is below the threshold value at 0.8-1.1%, the formation of PCDDs dominates, probably because the chlorine is used to chlorinate the non-substituted phenol to produce chlorophenols, which are important precursors for PCDDs. rather than chlorinate the dibenzofuran. While the chlorine level in the waste exceeds this threshold (0.8-1.1%), the rates of formation of PCDFs increase faster than those of PCDDs, probably because the chlorine content in the waste contributes to the deterioration of combustion conditions, and many products of incomplete combustion (PICs) like PAHs, will grow to a substantial level. When PCDD/Fs are formed from PAHs, the formation rates of PCDFs are higher than those of PCDDs.

Air Pollutants↗

Estimation of heavy metal transformations in municipal solid waste.

The behaviour of heavy metals bound to municipal solid waste (MSW) and exposed to 2 decades of anaerobic waste stabilization processes have been estimated. Heavy metal solid forms in a waste degradation residue have been compared with a reconstructed waste similar to that initially disposed of in 1973. The initial waste was composed of a mixture of shredded MSW (95% dry wt.) and anaerobic sewage sludge (5% dry wt.). A sequential chemical extraction method has been used to fractionate the heavy metals into five categories of available and reactive solid forms. The results imply that these forms can be ascribed to approximately 30% of the total content of the heavy metals in the degraded waste and the portion of heavy metals bound to oxidizable solid forms seems to be higher in the degraded than the fresh MSW. The bulk of the remaining heavy metals are assumed to be less available and bound into resistant lattice structures, such as metal and polymer items. A comparison between fractionation patterns of the waste in this study and of a few sediments collected from different environments imply similarities between the fresh MSW and an oxic sediment from one site and the sewage sludge and anoxic sediments from another site. Fractionation patterns of the degraded waste are found to be quite similar to those of the anoxic sediments, except for Pb, Ni and Cd which are more similar to fresh MSW.

Binding Sites↗