SEARCH · PubMed Health

Results for “Contamination”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources

PubMedDate not supplied

[Effect of saliva contamination on microleakage around class-5 cavities restored with three different types of adhesive materials].

The recent improvement of adhesive materials should decrease the risk related to saliva contamination. The aim of this study was to evaluate the effect of saliva contamination on the microleakage within class V cavities restored with three different types of materials: conventional glass ionomer cement, composite resin and compomer. 30 human extracted teeth were randomly divided in 3 equal groups. In each group, class V cavities were prepared on both facial and lingual surfaces (but joint for glass ionomer cement and bevelled incisal margin for composite resin and compomer). The lingual cavities were contaminated with saliva prior to restoration, while the facial cavities were not contaminated, serving as control. After water storage for 24 hours, teeth were immersed in 1% methylene blue solution for 24 hours. The axial sections were viewed under an optical microscope and the extent of dye penetration along cervical, axial and incisal margins was measured in millimetres. Statistic analysis showed that under salivary contamination, microleakage increased along the cervical margin of restoration for all three tested materials. Saliva contamination resulted in microleakage within the axial wall of the cavity only for the conventional glass ionomer cement. These data indicate that composite resin and compomer used together with new adhesives seem to be less sensitive to saliva contamination compared to conventional materials. However, under saliva contamination, cervical microleakage cannot be completely prevented and proper isolation should still be mandatory.

Adhesives↗

PubMed2005

Bond strength of composite to astringent-contaminated dentin using self-etching adhesives.

PURPOSE: To determine the effects of contamination by ferric sulfate and aluminum chloride astringents on the bond strength of composite bonded to superficial dentin using self-etching adhesives. METHODS: Freshly extracted human teeth were ground to expose superficial dentin and polished to 600 grit. One of three self-etching adhesive systems and restorative composites were bonded to the specimens, with contamination by one of three astringents and five surface conditions (no contamination, moist dentin control; contaminant, air, adhesive; contaminant, water rinse, air, adhesive; contaminant, water rinse, glycolic acid scrub, rinse, adhesive; contaminant, water rinse, chlorhexadine scrub, rinse, adhesive). Composite was bonded to the surfaces in the shape of an inverted, truncated cone (n = 5, 180 specimens total). Specimens were stored in water at 37 degrees C for 24 hours, then de-bonded in tension with a testing machine at a crosshead speed of 0.5 mm/minute. Tensile bond strengths (MPa) were calculated. RESULTS: Means (SD) were compared using analysis of variance. Significant differences (Fisher's PLSD) were found among all variables. SE and ABF had the highest control values, but were affected most by astringent contamination. Ferric sulfate reduced bond strengths the greatest in most cases, and aluminum chloride putty reduced bond strengths the least. Chlorhexadine rinse was most effective in restoring bond strength values.

Acid Etching, Dental↗

PubMedDate not supplied

Prompt remediation of water intrusion corrects the resultant mold contamination in a home.

More patients are turning to their allergists with symptoms compatible with allergic rhinitis, allergic sinusitis, and/or bronchial asthma after exposure to mold-contaminated indoor environments. These patients often seek guidance from their allergists in the remediation of the contaminated home or office. The aim of this study was to determine baseline mold spore counts for noncontaminated homes and report a successful mold remediation in one mold-contaminated home. Indoor air quality was tested using volumetric spore counts in 50 homes where homeowners reported no mold-related health problems and in one mold-contaminated home that was remediated. The health of the occupant of the mold-contaminated home also was assessed. Indoor volumetric mold spore counts ranged from 300 to 1200 spores/m3 in the baseline homes. For the successful remediation, the mold counts started at 300 spores/m3, increased to 2800 spores/m3 at the height of the mold contamination, and then fell to 800 spores/m3 after remediation. The occupant's allergic symptoms ceased on complete remediation of the home. Indoor volumetric mold counts taken with the Allergenco MK-3 can reveal a potential indoor mold contamination, with counts above 1000 spores/m3 suggesting indoor mold contamination. Once the presence of indoor mold growth is found, a prompt and thorough remediation can bring mold levels back to near-baseline level and minimize negative health effects for occupants.

Air Pollution, Indoor↗

PubMed2006

[Application of principal component analysis (PCA) for the estimation of source of heavy metal contamination in marine sediments].

Concentrations of heavy metals and organic matter in the bottom sediments of Jiaozhou Bay were determined and the average enrichment factors (AEFs) were used simultaneously to evaluate the extent of metal enrichment-contamination. Results show that heavy metal contamination in this bay could be divided into three groups: negligible to low contamination (AEFs < 2), which is the case of Zn (AEF = 1.11), Pb (AEF = 1.15), Cr (AEF = 1.52), Mn (AEF = 0.80) and Fe (AEF = 0.45); moderate contamination (AEFs = 2 - 3), which is the case of Cu (AEF = 2.79) and Cd (AEF = 2.52); certain to severe contamination (AEFs > 3), As (AEF = 3.03) and Hg (AEF = 8.08) being included in this group. Principal component analysis (PCA) was applied to estimate the sources of heavy metal contamination. Results that the first three components accounted for 52.61%, 17.37% and 15.60% of the total variance respectively exhibited that industrial wastewater, degradation of organic matter and erosion of rocks were the main sources of heavy metal contamination. The Q-analysis of PCA indicated that 14 stations could be divided into five groups. This result not only reflected the pollution characteristic of surface sediments, but also provided fundamental evidences for the putative analysis that industrial discharge is the main source of heavy metal contamination in Jiaozhou Bay.

Geologic Sediments↗

PubMedDate not supplied

Effects of cage contamination with coccidia and salmonella on acute salmonellosis in young chickens.

The effects of concurrent cage contamination with Salmonella typhimurium and Eimeria tenella on the establishment of salmonella infection in day-old chickens were investigated. Chickens were divided into five groups: uninfected recipient birds placed in a cage contaminated by donor birds infected with E. tenella and S. typhimurium; E. tenella-infected recipients placed in a cage contaminated by S. typhimurium-infected donors; uninfected recipients placed in a cage contaminated by S. typhimurium-infected donors; E. tenella-infected recipients placed in a cage contaminated by uninfected donors; and uninfected recipients placed in a cage contaminated by uninfected donors. Three identical trials were conducted. Recipient birds were necropsied 4, 7, and 11 days after caging. In the cage where donor birds infected with both organisms had been reared, S. typhimurium counts in feces and number of feces positive for S. typhimurium were significantly (P less than 0.05) greater than those in the other cages on days 0, 4, and 7 after caging. Moreover, in this cage, more chicks died, counts of S. typhimurium in cecal contents were greater, and more birds were positive for S. typhimurium than in the other groups. This suggests that S. typhimurium infection in day-old chickens is enhanced in cages contaminated with E. tenella and S. typhimurium compared with infection in cages contaminated with S. typhimurium alone.

Animals↗

PubMed1995

Intraocular bacterial contamination during cataract surgery in dogs.

Prevalence of intraoperative contamination of the eyelids, conjunctival sac, and aqueous humor of 50 canine eyes that underwent elective cataract surgery was determined, and the short-term outcomes for contaminated and noncontaminated eyes were compared by scoring media clarity, pupil size and shape, and behavioral evidence of vision during the initial 30-day postoperative period. Results of bacteriologic culture of anterior chamber samples were positive for 12 of the 50 (24%) eyes, but anterior chamber contamination was unrelated to results of bacteriologic culture of eyelids or conjunctival sac swab samples. Eyes undergoing phacoemulsification were less likely to be contaminated than were eyes undergoing intra- or extracapsular extraction. Eyes undergoing intra- or extracapsular extraction and eyes with anterior chamber contamination had a greater likelihood of developing glaucoma postoperatively. We did not detect an association between intraocular contamination and the surgeon performing the operation, the need for postoperative administration of tissue plasminogen activator, or the presence or absence of diabetes mellitus. Also, we did not detect any differences in outcome between eyes with and without intraocular contamination. Despite intraoperative bacterial contamination of the anterior chamber, bacterial endophthalmitis did not develop in any of the eyes.

Animals↗

PubMed1994

Volatile organic contaminants found in the habitable environment of the Space Shuttle: STS-26 to STS-55.

The health and performance of spacecraft crews can be adversely affected by contaminants present in the respirable air. Contaminants originate from hardware offgassing, crew and microbial metabolism, use of utility chemicals, leakage from fluid systems and payload experiments, and from electrical overheating. The quality of Shuttle air is measured by collecting contaminants in evacuated cylinders or on sorbent resin for later ground-based analysis by gas chromatography (GC) and GC mass spectrometry (MS). The results of those analyses are presented for 28 missions, including 5 Spacelabs which were flown in the payload bay of the Shuttle. The major contaminants were relatively nontoxic alcohols (ethanol, isopropanol), ketones (acetone, diacetone alcohol), alkanes, halocarbons (Halon 1301, Freon 113), and siloxanes. Occasionally, more toxic contaminants, such as methanol, acetaldehyde, and tetrachloroethene, were present at low concentrations (below 1 mg/m3). The contaminant concentrations measured in spacecraft air were compared to spacecraft maximum allowable concentrations (SMAC's) which are set to protect the crew from adverse health effects or performance decrements. Aggregate toxicity assessments (T values) of the contaminants present during each mission, calculated by summing the ratios of measured concentrations to each contaminant's SMAC, showed that air quality consistent met the criterion that the T value be less than 1.

Air Pollution, Indoor↗

PubMed1993

Examination gloves as barriers to hand contamination in clinical practice.

OBJECTIVE: To test the effectiveness of vinyl and latex gloves as barriers to hand contamination with gram-negative organisms and enterococci during routine hospital procedures. DESIGN AND INTERVENTIONS: We studied 137 procedures during which a health care worker's gloved hand contacted a patient's mucous membrane and was thus potentially contaminated with gram-negative rods or enterococci. Quantitative hand cultures were obtained from each health care worker before and after the gloved contact using a modified glove juice method, and the exterior glove surface was also quantitatively cultured after patient contact. Used gloves were then tested for leaks using the American Society for Testing and Materials' watertight test. SETTING: Harborview Medical Center, a 330-bed city-county hospital and level I regional trauma and burn center, is both a teaching facility affiliated with the University of Washington and the major provider of care to indigent and uninsured persons in Seattle-King County, Washington. PATIENTS AND OTHER PARTICIPANTS: Respiratory therapists performing endotracheal tube care on intubated intensive care unit patients, registered nurses performing digital rectal stimulation for bowel training on patients with spinal cord injury in the rehabilitation ward, and dentists performing routine dental examinations and procedures on healthy outpatients in the dental clinic. MAIN OUTCOME MEASURE AND RESULTS: Eighty-six of the 135 gloves cultured had gram-negative rods or enterococci on the external surface after use and were thus sources of potential hand contamination. Microbial contamination of the health care worker's hands occurred in 11 (13%; 95% confidence interval, 6% to 20%) of these 86 events, and was more frequent with vinyl (10 of 42) than latex (one of 44) gloves (P < .01). After use, glove leaks were also more frequent in vinyl gloves (26 of 61) than with latex gloves (six of 70) (P < .001). Even when leaks were present, gloves prevented hand contamination in 77% of instances and quantitative counts of microorganisms contaminating hands were 2 to 4 logs less than counts on external glove surfaces. Health care workers reported awareness of the presence of glove leaks in only seven (22%) of the 32 events in which leaks were subsequently demonstrated. CONCLUSIONS: Under conditions of routine use, gloves effectively function as a protective barrier even when leaks are present. Latex gloves were less frequently associated with leaks and hand contamination. Since hand contamination occurred after 13% of exposures and cannot be readily identified by health care workers, routine hand washing should be done after each patient contact.

Enterococcus↗

PubMedDate not supplied

Evaluation of diaphragm electromyogram contamination during progressive inspiratory maneuvers in humans.

The diaphragm electromyogram (EMGdi) is susceptible to contamination by non-diaphragm related electrical signals such as the ECG, electrode motion artifacts, and other sources of noise. It is difficult to distinguish between these contaminating signals and those that are representative of the non-contaminated EMGdi, especially during periods when the EMGdi amplitude is relatively small, as during mild contractions of the diaphragm. The aim of the present study was to evaluate how contaminating signals influence the EMGdi power spectrum center frequency (CF) during progressive inspiratory maneuvers. EMGdi and transdiaphragmatic pressure (Pdi) were measured via an esophageal electrode in eight patients with cervical cord injury performing inspiratory capacity (IC) maneuvers. The influence of the contaminating sources on CF was evaluated by two spectral deformation indices, one which is sensitive to both high and low frequency spectral deformation (omega index), and the other which is sensitive to high frequency deformation only (CF1000/CF500 index). The results indicated that EMGdi CF values scattered over a wide frequency range, particularly when the signals were obtained at Pdi levels less than 15% of Pdimax, or at lung volumes less than 30% of IC. When the spectral deformation indices were applied, the scattering in CF values was drastically reduced. This was expressed by a factor of 4 reduction in the coefficient of variation of the CF values. The majority of the excluded EMGdi signals (i.e. not satisfying the spectral deformation index inclusion levels), had low CF values mainly due to the presence of electrode motion artifacts. It was concluded that: 1) The majority of EMGdi power spectrums are deformed early on during unloaded inspirations, and their CF values should be carefully interpreted as being representative of diaphragm function. 2) The relative contribution of contaminating signals in the EMGdi decreases proportionally throughout the first two thirds of an inspiration to IC. 3) The use of visual inspection of the signal in the time domain is questionable as a method to discriminate non-contaminated signals. 4) Analysis of the signal in the frequency domain makes it possible to detect the influence of signal contamination.

Adult↗

PubMed1997

The significance of tumor contamination in the bone marrow from high-risk primary breast cancer patients treated with high-dose chemotherapy and hematopoietic support.

We studied the incidence and significance of tumor cell contamination of the bone marrow or peripheral blood progenitor cells of patients who had high risk primary breast cancer involving 10 or more axillary lymph nodes and who received high dose cyclophosphamide, cisplatin, and carmustine with hematopoietic support as consolidation following standard dose adjuvant chemotherapy. The autologous hematopoietic cell products were evaluated in 85 eligible patients. Eighty-three samples were available from the time of bone marrow harvest, and peripheral blood progenitor cells were evaluated from 57 of the 65 patients who additionally received these products. The screening technique utilized a panel of four anti-breast cancer monoclonal antibodies and an immunohistochemical technique. Thirty (36%) of the 83 evaluable patients had tumor cell contamination of the bone marrow. Only 2 (4%) of the 57 patients had tumor cell contamination of the peripheral blood progenitor cells. Tumor cell contamination of the bone marrow was associated with shorter disease-free survival and overall survival. In addition, the higher the number of tumor cells identified, the shorter disease-free and overall survival. There was no relationship between the tumor cell contamination of the bone marrow and the site of relapse. The combination of the log of the number of tumor cells +1 and number of positive lymph nodes predicted both disease-free and overall survival. Tumor cell contamination of the bone marrow from the harvest is associated with shorter disease-free and overall survival for patients who were treated with standard dose chemotherapy followed by consolidation with high dose alkylating agents and hematopoietic support. It is unclear what role the contaminating tumor cells have in relapse, and they may just be a high-risk marker. A comparison with other prognostic factors and characteristics of the tumor may determine the significance of the tumor contamination of the bone marrow.

Adult↗

PubMed1997

Extraneous lipid contamination in single-volume proton MR spectroscopy: phantom and human studies.

PURPOSE: To determine the degree of extraneous lipid contamination in defined volumes of interest studied with single-volume proton MR spectroscopy. METHODS: Single-volume proton MR spectroscopy was performed on a fat/water phantom and in three volunteers using the stimulated-echo acquisition mode (STEAM) and point-resolved spectroscopy (PRESS) localization methods. Three different volumes of interest (8, 27, and 64 cm3) were examined at echo times of 20, 135, and 270 for the STEAM sequences and 135 and 270 for the PRESS acquisitions in both the phantom and the volunteers (volumes of interest were placed adjacent to but not encompassing fat-containing structures, such as the scalp and retroorbital fat). The degree of lipid contamination was then correlated with measurements of the section profiles. RESULTS: The PRESS method resulted in less extraneous lipid contamination in both phantom and volunteer studies. The STEAM method had the highest level of lipid contamination signal in phantom and human studies. In the volunteers, volumes of interest abutting fat-containing structures obtained with PRESS or STEAM sequences showed no lipid contamination. However, the STEAM sequences showed lipid signal in the volume of interest adjacent to orbital fat whereas the PRESS sequences did not. These observations are supported by the section profile studies, which showed that the actual volume excited by the STEAM sequence was 7% to 32% larger than that originally selected, while with PRESS the actual excited volume was 12% to 16% smaller than that originally selected. CONCLUSION: In our MR unit, short-echo-time STEAM sequences (< or = 135 milliseconds) resulted in extraneous lipid contamination in phantom and human studies adjacent to the orbits. PRESS sequences showed no lipid contamination in volumes abutting fat structures in phantoms or humans. These results correlated closely with the configuration of the section profiles. Although these findings might be dependent on the MR unit used, our study could help determine extraneous lipid contamination for other MR units.

Adipose Tissue↗

PubMed1976

Wound infections in clean and potentially contaminated surgery. Importance of bacterial and non-bacterial factors.

Postoperative wound infections in clean--and potentially contaminated surgery were studied with regard to demonstrable wound contamination and the occurrence of non-bacterial wound infection promoting factors. The incidence of demonstrable wound contamination in clean surgery was low, and observed rates of wound infection could not be related to differences in wound contamination, but to the occurrence of non-bacterial wound infection potentiating factors, e.g. implantation of foreign materials (osteosynthesis), cicatrical tissues or a compromized host. Corresponding studies in potentially contaminated surgery revealed a significantly higher incidence of wound contamination compared to clean surgery and a significant correlation between Gram negative wound contamination and rates of postoperative wound infections in certain types of gastrointestinal surgery. Patient factors, such as age or malignancy, did not influence the wound infection frequency when the incidence of wound contamination was taken into consideration.

Adolescent↗

PubMed1998

Investigation of cross contamination in a Mycobacterium tuberculosis laboratory using IS6110 DNA fingerprinting.

SETTING: A laboratory for routine culturing of Mycobacterium tuberculosis. OBJECTIVE: Investigation of an episode of laboratory cross contamination using IS6110 restriction fragment length polymorphism (RFLP) typing. Improvement of laboratory protocols to prevent contaminations in the future. To stress the importance of 'good laboratory practice', and interaction with clinicians about laboratory results. DESIGN: Fingerprinting of mycobacterial isolates from 1) cultures suspected of being contaminated and 2) strains suspected of being the source of the cross-contamination. RESULTS: RFLP typing results indicated that clinical samples were contaminated by strains which had been processed in species identification procedures one day earlier in the same safety cabinet. This cross contamination also resulted in exceptional RFLP typing results--mixed banding patterns. Three patients were treated on the basis of false-positive laboratory results. Because the laboratory results were confusing for the clinicians, the treatment of one true tuberculosis patient was severely delayed. CONCLUSION: 'Good laboratory practice' is very important to prevent cross contamination. RFLP typing proved to be a useful tool to trace the source of contamination. Interaction with clinicians receiving doubtful results is of the utmost importance.

Bacterial Typing Techniques↗

PubMed1998

Model tests for the efficacy of disinfectants on surfaces. IV. Communication: dependence of test results on the amount of contamination and the kind of active substance.

In the assessment of efficacy of surface disinfectants, many influencing factors have to be taken into account. One essential item is whether the surface to be disinfected is clean or soiled. Among the feasible soilings, the blood is of particular consequences because it ads impediments to many disinfecting agents. This paper shows to what extent the impairment of the efficacy of typical active agents depends on the blood burden of the surfaces. Therefore, test surfaces (varnished plywood) were contaminated with 0.01 to 0.08 ml of coagulating blood per test area (3 cm2). The blood contained cells of Staphylococcus aureus as test germs. The disinfection was effected by immersing the test objects in the disinfecting solution for 5 seconds and mingling the adhering disinfecting solution (about 0.02 ml) with the coagulated blood on the test surface with a glass spatula for about 20 seconds. Subsequently, the test objects remained in a horizontal position at room conditions for 4 hours and then the numbers of surviving test germs were determined. The graphical representation of the results shows that the efficacy curves of formaldehyde and phenol lie very closely together, i.e. their effect is hardly impaired by the different blood burdens of the test areas. The efficacy curves of glutaraldehyde, peracetic acid, chloramine T, and quaternary ammonium compounds lie very far apart from each other. To achieve the same microbicidal effect (log N/N0 = -5) when the contaminating amount is raised from 10 microliters/3 cm2 to 80 microliters/3 cm2, the concentration of chloramine T has to be raised by a factor of 5.4, peracetic acid by a factor of 9, glutaraldehyde by a factor of 24, quaternary ammonium compound even by a factor of 67. Ethanol and sodium hypochlorite showed a divergent behaviour. For ethanol, the efficacy diminution produced by increasing the contamination amount by a factor of 4 can be compensated by raising the concentration from 50% to about 70%. But again and again, there were test objects on which the number of germs able to reproduce had only been lowered by a factor of about 10(-3). At the highest contamination of 80 microliters/3 cm2, even 95% ethanol proved to be completely insufficient. With sodium hypochlorite even at the lowest contamination of 10 microliters/3 cm2, a microbicidal effect of only about 10(-5) was obtained. With increasing contamination, the highest achievable microbicidal effect clearly decreased. It is remarkable that the microbicidal effect of this active agent decreased with increasing concentrations. The results show how important it is in testing the efficacy of disinfecting agents to exactly lay down the amount of contaminating substances. To find out how safely an agent works under harder circumstances, the dependence of the microbicidal effect from the amount of contaminating substances per test area has to be determined.

Blood↗

PubMed2003

Survival of foodborne pathogens on stainless steel surfaces and cross-contamination to foods.

The retention of bacteria on food contact surfaces increases the risk of cross-contamination of these microorganisms to food. The risk has been considered to be lowered when the surfaces are dry, partly because bacterial growth and survival would be reduced. However, some non-spore-forming bacteria might be able to withstand dry conditions on surfaces for an extensive period of time. In this study the survival of Salmonella enteritidis, Staphylococcus aureus and Campylobacter jejuni on stainless steel surfaces at different initial levels was determined at room temperature. The transfer rates of these pathogens from kitchen sponges to stainless steel surfaces and from these surfaces to foods were also investigated. Staph. aureus was recovered from the surfaces for at least 4 days when the contamination level was high (10(5) CFU/cm2) or moderate (10(3) CFU/cm2). At low levels (10 CFU/cm2), the surviving numbers decreased below the detection limit (4 CFU/100 cm2) within 2 days. S. enteritidis was recovered from surfaces for at least 4 days at high contamination levels, but at moderate level, the numbers decreased to the detection limit within 24 h and at low level within 1 h. C. jejuni was the most susceptible to slow-air-drying on surfaces; at high contamination levels, the numbers decreased below the detection limit within 4 h. The test microorganisms were readily transmitted from the wet sponges to the stainless steel surfaces and from these surfaces to the cucumber and chicken fillet slices, with the transfer rates varied from 20% to 100%. This study has highlighted the fact that pathogens remain viable on dry stainless steel surfaces and present a contamination hazard for considerable periods of time, dependent on the contamination levels and type of pathogen. Systematic studies on the risks of pathogen transfer associated with surface cleaning using contaminated sponges provide quantitative data from which a model of risks assessment in domestic setting could lead.

Bacterial Adhesion↗

PubMed2007

Influence of contamination on bonding to zirconia ceramic.

The purpose of this study was to investigate the influences of contaminations and cleaning methods on bonding to dental zirconia ceramic. After saliva immersion and using silicone disclosing agent, airborne-particle abraded ceramic specimens were cleaned with isopropanol (AL), acetone (AC), 37% phosphoric acid (PA), additional airborne-particle abrasion (AA), or only with water rinsing (SS). Airborne-particle abraded specimens without contaminations (CL) were used as control group. For chemical analysis specimens of all groups were examined with X-ray photoelectron spectroscopy (XPS). Plexiglas tubes filled with composite resin were bonded to ceramic specimens using a phosphate-monomer containing composite luting resin. After 3-day water storage, tensile bond strengths (TBS) were tested. XPS analysis of group SS showed the presence of saliva and silicone (Si) contamination on the surface. The ratios of carbon/zirconium and oxygen/zirconium for groups PA and AA were comparable to those ratios obtained for group CL, indicating the removal of the organic saliva contamination. Airborne-particle abrasion and acetone completely removed Si contamination from ceramic surfaces. Isopropanol had little cleaning effect on the two contaminants. TBS (median +/- standard deviation) in MPa of the groups SS (11.6 +/- 3.1), AL (10.0 +/- 2.9), and AC (13.0 +/- 2.8) were statistically lower than those of groups PA (33.6 +/- 5.5), AA (40.1 +/- 3.6), and CL (47.0 +/- 8.1) (p < 0.001), while no differences were found in TBS between groups AA and CL (p > 0.5). Contamination significantly reduced bond strengths to zirconia ceramic. Airborne-particle abrasion was the most effective cleaning method.

Ceramics↗

PubMed1998

Dietary exposure to chemical contaminants from traditional food among adult Dene/Métis in the western Northwest Territories, Canada.

Environmental contaminants such as organochlorines and heavy metals have been reported to bioaccumulate in Arctic and subarctic wildlife. The Indigenous Peoples in northern and Arctic Canada rely on local wildlife as an important food source, and it is thus hypothesized that they may have high intakes of these contaminants. Herein, an assessment of dietary exposure to selected organochlorines and heavy metals for Indigenous Peoples of the western Northwest Territories (NWT) is presented. Dietary data were collected from 1012 adults with 24-h recalls in 16 communities in the western NWT (Denendeh). A comprehensive survey of the literature, as well as in-house analysis, formed the basis of a large traditional food-contaminant database. By combining the dietary and contaminant data, dietary exposure to 11 chemical contaminants was calculated. Dietary exposure to chemical contaminants in Denendeh is generally low and there is little, if any, associated health risk. However there are specific contaminants in certain communities for which exposure on a single day approaches the tolerable daily intake levels. These situations are detailed and monitoring needs are described.

Adult↗

PubMed1985

Mean geocarposphere temperatures that induce preharvest aflatoxin contamination of peanuts under drought stress.

Apparently undamaged peanuts grown under environmental stress in the form of drought and heat become contaminated with Aspergillus flavus and aflatoxin in the soil prior to harvest. The upper mean temperature limit for aflatoxin contamination in undamaged peanut kernels grown under drought stress the latter 4-6 weeks of the growing season was between 29.6-31.3 degrees C. The lower limit was between 25.7-26.3 degrees C. That is, peanuts grown under drought stress with a mean geocarposphere temperature of 29.6 degrees C were highly contaminated while those at 31.3 degrees C were not contaminated. Likewise, those grown under drought stress with a mean geocarposphere temperature of 25.7 degrees C were not contaminated while those subjected to a mean geocarposphere temperature of 26.0 degrees C resulted in some categories becoming contaminated. Increasing the mean temperature up to 29.6 degrees C caused increasing amounts of contamination.

Aflatoxins↗