PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “WASTES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources

Regulatory framework for the thermal treatment of various waste streams.

Since 1990, regulations and standards have changed considerably. This article is an update of the regulatory requirements for the thermal treatment of various waste streams. The waste categories covered, along with the laws they are governed under, include: Hazardous waste under Subtitle C of the Resource Conservation and Recovery Act (RCRA) and under the Clean Air Act; municipal solid waste under Subtitle D of the RCRA; medical waste under Subtitle J of the RCRA; Superfund waste under the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA); toxic waste under the Toxic Substances Control Act (TSCA); and sludge waste under the Clean Water Act (CWA).

Humans↗

Immobilization of radioactive waste by cementation with purified kaolin clay.

A study is undertaken to determine the waste immobilization performance of low-level wastes in cement-clay mixtures. Liquid low-level wastes are precipitated using chemical methods, followed by solidification in drums. Solidification is done using cementation processes. Long-term leaching rates of the radionuclides are used as indicators of immobilization performance of solidified waste forms. In addition to evaluating the effects of kaolin clay on the leaching properties of the cemented waste forms, the effect of addition of kaolin on the strength of the cemented waste form is also investigated. The long term leaching tests show that inclusion of kaolin in cement reduces the leaching rates of the radionuclides significantly. However, clay additions in excess of 15 wt.% causes a significant decrease in the hydrolytic stability of cemented waste form. It is found that the best waste isolation, without causing a loss in the mechanical strength, is obtained when the kaolin content in cement is 5%.

Aluminum Silicates↗

Colloid formation in Hanford sediments reacted with simulated tank waste.

Solutions of high pH, ionic strength, and aluminum concentration have leaked into the subsurface from underground waste storage tanks atthe Hanford Reservation in Washington State. Here, we test the hypothesis that these waste solutions alter and dissolve the native minerals present in the sediments and that colloidal (diameter < 2 microm) feldspathoids form. We reacted Hanford sediments with simulated solutions representative of Hanford waste tanks. The solutions consisted of 1.4 or 2.8 mol/kg NaOH, 0.125 or 0.25 mol/kg NaAlO4, and 3.7 mol/kg NaNO3 and were contacted with the sediments for a period of 25 or 40 days at 50 degrees C. The colloidal size fraction was separated from the sediments and characterized in terms of mineralogy, morphology, chemical composition, and electrophoretic mobility. Upon reaction with tank waste solutions, native minerals released Si and other elements into the solution phase. This Si precipitated with the Al present in the waste solutions to form secondary minerals, identified as the feldspathoids cancrinite and sodalite. The solution phase was modeled with the chemical equilibrium model GMIN for solution speciation and saturation indices with respect to sodalite and cancrinite. The amount of colloidal material in the sediments increased upon reaction with waste solutions. At the natural pH found in Hanford sediments (pH 8) the newly formed minerals are negatively charged, similar to the unreacted colloidal material present in the sediments. The formation of colloidal material in Hanford sediments upon reaction with tank waste solutions is an important aspect to consider in the characterization of Hanford tank leaks and may affect the fate of hazardous radionuclides present in the tank waste.

Aluminum Oxide↗

Anaerobic waste digestion in Germany--status and recent developments.

Anaerobic treatment processes are especially suited for the utilization of wet organic wastes from agriculture and industry as well as for the organic part of source-separated household wastes. Anaerobic degradation is a very cost-effective method for treating biogenic wastes because the formed biogas can be used for heat and electricity production and the digester residues can be recycled to agriculture as a secondary fertilizer. Anaerobic technology will also be used for the common treatment of wastes together with renewable energy crops in order to reduce the CO2-emissions according the Kyoto protocol. Various process types are applied in Germany which differ in material, reaction conditions and in the form of the used reactor systems. The widespread introduction of anaerobic digestion in Germany has shown that biogenic organic wastes are a valuable source for energy and nutrients. Anaerobic waste treatment is done today in approx. 850 biogas plants on small farm scale as well as on large industrial scale with the best beneficial and economic outcome. Due to some new environmental protection acts which promote the recycling of wastes and their utilization for renewable energy formation it can be expected that several hundreds new biogas plants will be built per year in Germany. In order to use the synergetic effects of a combined fermentation of wastes and energy crops new process types must be developed in order to optimize the substrate combinations and the process conditions for maximum biodegradation.

Anaerobiosis↗

Electrochemical or UV-photochemical oxidation of industrial wastes containing polar aromatic sulphonates.

UNLABELLED: BACKGROUND AND INTENTION: Aromatic sulphonates other than surfactants and their hydroxy and amino-derivatives are important intermediates for the production of azo dyes. Their production on a large scale can be detrimental for the environment, if the by-products of their synthesis are not disposed of appropriately. An industrial waste, the organic components of which were mainly amino and hydroxy-substituted aromatic sulphonates, seriously endangers the environment close to an dismissed Italian industrial site. Inorganic sulphates and chlorides contained in the waste seriously hinder its disposal by incineration, since they corrode furnace walls. In this work, preliminary exploration of aqueous-phase electrochemically and photochemically induced oxidation techniques have been performed as possible alternatives to incineration. METHODS: Electrochemically-induced oxidation was experimented on individual aromatic sulphonates and on an industrial waste by electrolysing them between smooth platinum electrodes at low temperature (5 degrees C) and high current densities (0.4 A/cm2) with aqueous 0.5 M NaHSO4 electrolyte. Photochemically-induced oxidation was performed by irradiating individual aromatic sulphonates or industrial waste with a 500 W mercury lamp in the presence of sodium peroxydisulphate. RESULTS AND DISCUSSION: After 200 min electrodegradation, 90% of the original compounds disappeared, while 50% Total Organic Carbon (TOC) of an industrial waste was removed from solution after 10 hours. After 180 min UV-photodegradation, 90% of two test aromatic sulphonates disappeared, while 65% of TOC of industrial waste was removed after 5 hours. CONCLUSIONS: Two methods, electrochemical and UV-persulphate oxidation of an industrial waste, were used in order to propose a disposal procedure alternative to incineration. Electrodegradation with smooth Pt anode in 0.5 M NaHSO4 at 5 degrees C halved TOC concentration within 10 hours, while persulphate-assisted UV-photochemical oxidation with a 500 W high pressure Hg lamp abated two-thirds of TOC concentration after 5 hours. Energetic consumption of electrodegradation was 0.33 kWh/g TOC, while that of photooxidation was larger than 2 kWh/g TOC. Although both techniques can be considered efficient from a purely chemical point of view, since both are capable of wet-oxidising the aromatic sulphonates and the industrial waste, electrodegradation seems more promising than a photochemical degradation if economical considerations are also taken into account. Considering also that neither cell design nor catalyst were optimised in this preliminary study, the energy yield of electrodegradation seems likely to be largely improved.

Electrochemistry↗

Hospital waste management status in university hospitals of the Fars province, Iran.

Hospital waste contains large quantities of hazardous materials. In Iran, as in many developing countries, not much attention has been paid to this matter. Little information is available regarding the generation and disposal of medical waste in Iran, and this fact hinders planning for a better management of the aforementioned waste. This paper describes a survey performed on the collection and disposal of waste in the university hospitals of the Fars province, which are the medical referral centres in the southern half of the country, and the results obtained are fully discussed. The lack of separation between hazardous and non- hazardous waste, an absence of necessary rules and regulations applying to the collection of waste from the hospital wards and the on-site transport to a temporary storage location, a lack of proper waste treatment, disposal of hospital waste along with municipal garbage, insufficient training of personnel, insufficient personal protective equipment and lack of knowledge regarding the proper use of such equipment, were the main findings. For a rapid improvement of existing conditions, performing extensive research for the assessment of present situation in the hospitals of this country, compilation of rules and establishment of standards along with effective training for the personnel is recommended.

Data Collection↗

Genotoxicity studies in semiconductor industry. 1. In vitro mutagenicity and genotoxicity studies of waste samples resulting from plasma etching.

Solid waste samples taken from the etching reactor, the turbo pump, and the waste air system of a plasma etching technology line in semiconductor production were studied as to their genotoxic properties in a bacterial repair test, in the Ames/Salmonella microsome assay, in the SOS chromotest, in primary mouse hepatocytes, and in Chinese hamster V79 cell cultures. All three waste samples were found to be active by inducing of unscheduled DNA-synthesis in mouse hepatocytes in vitro. In the bacterial rec-type repair test with Proteus mirabilis, waste samples taken from the turbo pump and the vacuum pipe system were not genotoxic. The waste sample taken from the chlorine-mediated plasma reactor was clearly positive in the bacterial repair assay and in the SOS chromotest wit Escherichia coli. Mutagenic activity was demonstrated for all samples in the presence and absence of S9 mix made from mouse liver homogenate. Again, highest mutagenic activity was recorded for the waste sample taken from the plasma reactor, while samples collected from the turbo pump and from the waste air system before dilution and liberation of the air were less mutagenic. For all samples chromosomal damage in V79 cells was not detected, indicating absence of clastogenic activity in vitro. Altogether, these results indicate generation of genotoxic and mutagenic products as a consequence of chlorine-mediated plasma etching in the microelectronics industry and the presence of genotoxins even in places distant from the plasma reactor. Occupational exposure can be expected both from the precipitated wastes and from chemicals reaching the environment with the air stream.

Animals↗

Non-combustible waste vitrification with plasma torch melter.

Non-combustible radioactive wastes generated from Nuclear Power Plants (NPPs) are composed of concrete, glass, asbestos, metal, sand, soil, spent filters, etc. The melting tests for concrete, glass, sand, and spent filters were carried out using a 60 kW plasma torch system. The surrogate wastes were prepared for the tests. Non-radioactive Co and Cs were added to the surrogates in order to simulate the radioactive waste. Several kinds of surrogate prepared by their own mixture or by single waste were melted with the plasma torch system to produce glassy waste forms. The characteristics of glassy waste forms were examined for the volume reduction factor (VRF) and the leach rate. The VRFs were estimated through the density measurement of the surrogates and the glassy waste forms, and were turned out to be 1.2-2.4. The EPA (Environmental Protection Agency) Toxicity Characteristic Leaching Procedure (TCLP) was used to determine the leach resistance for As, Ba, Hg, Pb, Cd, Cr, Se, Co, and Cs. The leaching index was calculated using the total content of each element in both the waste forms and the leachant. The TCLP tests resulted in that the leach rates for all elements except Co and Cs were lower than those of the Universal Treatment Standard (UTS) limits. There were no UTS limits for Co and Cs, and their leach rate & index from the experiments were resulted in around 10 times higher than those of other elements.

Chemical Phenomena↗

Variations in hospital waste quantities and generation rates.

The relationship between public health and improper collection, handling, and disposal of solid wastes in general, and hospital wastes in particular, is quite clear. Hazardous and nonhazardous wastes generated from different divisions of two of the largest public hospitals (capacity of approximately 400 beds each) in Kuwait were quantified and generation rates were determined. The generation rates were related to some important factors such as the number of patients, number of beds, and the type of activity conducted in different sections of the hospitals. The relationship between the waste generation rate and the number of patients was more applicable than that expressed in terms of the number of beds. The rates observed were in the range of 4.89 to 5.4 kg/patient/day, which corresponds to 3.65 to 3.97 kg/bed/day, respectively. These generation rates were comparable with those reported in the literature for similar hospitals. Minimal waste quantities were collected in the weekends. The study indicated that the hospitals surveyed provide some segregation of hazardous and nonhazardous wastes. Hazardous wastes contributed about 53% of the total quantity of wastes generated at the hospitals.

Data Collection↗

Biological control of hog waste odor through stimulated microbial Fe(III) reduction.

Odor control and disposal of swine waste have inhibited expansion of swine production facilities throughout the United States. Swine waste odor is associated primarily with high concentrations of volatile fatty acids (VFAs). Here, we demonstrate that stimulated Fe(III) reduction in hog manure can rapidly remove the malodorous compounds and enhance methane production by 200%. As part of these studies, we enumerated the indigenous Fe(III)-reducing population in swine waste and identified members of the family Geobacteraceae as the dominant species. These organisms were present at concentrations as high as 2 x 10(5) cells g(-1). Several pure cultures of Fe(III) reducers, including Geobacter metallireducens, Geobacter humireducens, Geobacter sulfurreducens, Geobacter grbiciae, Geothrix fermentans, and Geovibrio ferrireducens, readily degraded some or all of the malodorous VFAs found in swine manure. In contrast, Shewanella algae did not degrade any of these compounds. We isolated an Fe(III) reducer, Geobacter strain NU, from materials collected from primary swine waste lagoons. This organism degraded all of the malodorous VFAs tested and readily grew in swine waste amended with Fe(III). When raw waste amended with Fe(III) was inoculated with strain NU, the VFA content rapidly decreased, corresponding with an almost complete removal of the odor. In contrast, the raw waste without Fe(III) or strain NU showed a marked increase in VFA content and a rapid pH drop. This study showed that Fe(III) supplementation combined with appropriate bioaugmentation provides a simple, cost-effective approach to deodorize and treat swine waste, removing a significant impediment to the expansion of pork production facilities.

Animals↗

Optimisation of industrial wastes reuse as construction materials.

This study concerns the reuse of two inorganic wastes, foundry residues and fly ashes from municipal solid waste incineration, as "recycled aggregate" in concrete production. This kind of reuse was optimised by waste treatment with the following steps: waste washing with water; waste stabilisation-solidification treatment with inorganic reagents; final grinding of the stabilised waste after curing for about 10-20 days. Both the treated wastes were reused in concrete production with different mix-designs. Concrete specimens were characterised by means of conventional physical-mechanical tests (compression, elasticity modulus, shrinkage) and different leaching tests. Experimental results showed that a good structural and environmental quality of "recycled concrete" is due both to a correct waste treatment and to a correct mix-design for concrete mixture.

Conservation of Natural Resources↗

Hazardous waste: recognition of the problem and response.

Two accidents, Seveso 1976 and Bhopal 1984, paved the way toward the international control of hazardous substances and waste, and public dissemination of information on their releases and transfers. The final facility cleanup in Seveso took place in 1982. The remaining dioxin-containing residues were packed in 41 drums. However, the drums disappeared and were found several months later in France. This was the starting point for the development of international control on transboundary movements of waste within the OECD. Between 1983 and 1992 OECD developed five binding Council Acts on the classification and control of transboundary movements of waste. This work also provided the foundation for the adoption of a series of directives and the Shipment Regulation 259/93 within the European Community, aimed at monitoring and controlling transboundary movements of hazardous waste, and of a global instrument in 1989 under UNEP: Basel Convention on the Control of Transboundary Movements of Hazardous Waste and Their Disposal. The Bhopal 1984 and another similar accident shortly thereafter led to the development of a mandatory Toxics Release Inventory (TRI) in the United States in 1986, to inform the public of releases and transfers of potentially hazardous pollutants and waste. OECD work has supported the rapidly increasing implementation of Pollutant Release and Transfer Registers (PRTRs) since 1994. The Basel 1989, Rotterdam 1998, and Stockholm 2001 Conventions all require strict control of the production and management of hazardous chemicals and waste. Yet, production of hazardous chemicals and generation of hazardous waste are still in rise.

Hazardous Waste↗

Hydrogen and ethanol production from glycerol-containing wastes discharged after biodiesel manufacturing process.

H2 and ethanol production from glycerol-containing wastes discharged after a manufacturing process for biodiesel fuel (biodiesel wastes) using Enterobacter aerogenes HU-101 was evaluated. The biodiesel wastes should be diluted with a synthetic medium to increase the rate of glycerol utilization and the addition of yeast extract and tryptone to the synthetic medium accelerated the production of H2 and ethanol. The yields of H2 and ethanol decreased with an increase in the concentrations of biodiesel wastes and commercially available glycerol (pure glycerol). Furthermore, the rates of H2 and ethanol production from biodiesel wastes were much lower than those at the same concentration of pure glycerol, partially due to a high salt content in the wastes. In continuous culture with a packed-bed reactor using self-immobilized cells, the maximum rate of H2 production from pure glycerol was 80 mmol/l/h yielding ethanol at 0.8 mol/mol-glycerol, while that from biodiesel wastes was only 30 mmol/l/h. However, using porous ceramics as a support material to fix cells in the reactor, the maximum H2 production rate from biodiesel wastes reached 63 mmol/l/h obtaining an ethanol yield of 0.85 mol/mol-glycerol.

Bioreactors↗

Production of specific copolymers of polyhydroxyalkanoates from industrial waste.

Polyhydroxyalkanoates, biodegradable plastics with the desired physical and chemical properties of conventional synthetic plastics, are extensively investigated. In this study, specific bacterial strains produced specific copolymers from food waste. Copolymers of HB and HV (poly[3-hydroxybutyrate-co-3-hydroxyvalerate]) were obtained using various ratios of butyric acid (C4) and valeric acid (C5) as carbon sources. The C4 to C5 ratio affected the melting points of the copolymers. Melting and glass transition temperatures and many other thermal properties are important parameters relative to in-service polymer applications. Higher ratios of butyrate to valerate gave higher melting points. When a mixed culture of activated sludge was employed to produce copolymers using food wastes as nutrients, the obtained copolymers showed various monomer compositions. Copolymers with a higher portion of HV were obtained using soy waste; copolymers with less HV were obtained using malt wastes. Pure strains, (i.e., Alcaligenes latus DSM 1122, and DSM 1124, Staphylococcus spp., Klebsiella spp.) produced specific copolymers from food waste. Only Klebsiella spp. produced different copolymers; the ratios of HB:HV were 93:7 and 79:21 from malt waste and soy waste, respectively. The other strains produced polymers of 100% HB. Selecting industrial food wastes as carbon sources can further reduce the cost of producing copolymers.

Alcaligenes↗

Evaluation of dehydrated restaurant food waste products as feedstuffs for finishing pigs.

Two dehydrated restaurant food waste (DFW) products were evaluated as potential feedstuffs for finishing pigs. For each product, fresh food wastes were obtained from food service operations at a resort complex in central Florida. The wastes were mostly leftover food and plate scrapings. The wastes were minced, blended with a feed stock (soy hulls and wheat flour [DFW1] or soy hulls and ground corn [DFW2]), pelleted, and dried. The dried product was then blended with additional minced fresh food wastes and dried; this process was then repeated. The final DFW products contained approximately 60% dried food wastes. The DFW1 and DFW2 products contained 11.4 and 8.4% moisture, 15.0 and 14.4% CP, 13.8 and 16.0% crude fat, 10.4 and 14.5% crude fiber, 5.8 and 4.7% ash, .63 and .64% lysine, .54 and .63% Ca, .34 and .38% P, .69 and .86% Cl, and .35 and .47% Na, respectively. Two feeding trials with 48 and 72 finishing pigs (56 to 112 kg), respectively, were conducted comparing diets without (control) or with the DFW product included at 40% of the diet (DFW1) for Trial 1 and 40 or 80% of the diet (DFW2) for Trial 2. Pigs fed the DFW diets in both trials had ADG that were similar (P > . 10) to and average gain:feed ratios that were superior (P = .06, Trial 1; P < .01; linear, Trial 2) to those for control pigs. Carcass lean content and lean quality scores were not reduced (P > . 10) by feeding pigs the DFW diets in either trial. Carcass fat became softer (P < .01; linear) with increasing amount of DFW2 in the diet in Trial 2. Thus, dehydrated restaurant food wastes have the potential to produce a nutritious feedstuff for pigs while offering a viable solid waste disposal option.

Animal Feed↗

Health care: a leader or a follower? Reducing disposable waste.

We clearly have the means to examine and reduce the amounts and types of disposable medical waste that health care institutions are creating. Although there may be special circumstances that prevent specific hospitals, or specific departments within a hospital, from converting to alternative products, much improvement can still be made. There are several strong examples of hospitals across the United States with programs that have drastically cut the amount of waste they are generating. They have eliminated disposable cups and eating utensils from the cafeterias, shifted to reusable underpads and surgical linens, and established recycling programs for paper and cardboard. These few cases are not enough. We cannot be lulled into believing that these exceptional efforts on the part of a few institutions are all that is needed. We should remember that if Mother Nature had intended for us to pat ourselves on the back, our hinges would be different. What is needed is a clear statement from the health care industry of its responsibility to society with regard to managing its waste. Leadership begins with action. If the health care industry does not take steps to regulate its disposable waste, the government undoubtedly will. We do not need to wait for our supervisors or administrators to fashion credos for us. All staff members know there are numerous ways that they can affect the amount of waste produced at their hospitals. They can also begin to affect the attitudes of those working around them. The consequences of inaction are simply too great. As fictional as half-empty grocery stores may have sounded at the beginning of this article, the problems that we face with waste disposal are certainly as grim. If we wait for our state and federal governments to solve the problems, it may be too late; and if it is too late, the solutions that they develop will certainly be extreme. We have the technology and the ability to cut dramatically the amount of disposable waste that health care generates. In practically every case, the lower-waste options also save the institution money. It is time that we honestly challenged our need for today's convenience at the expense of tomorrow's quality of life.

Conservation of Natural Resources↗

[Nature and frequency of the existence of mold fungi in garbage cans for biological waste and the resultant airborne spore pollution].

In organic waste, numerous mold fungi and other microorganisms develop sometimes within a few hours only which decompose the organic material already in the collecting containers generating heat and odor. With regard to the emission of mold fungus spores out of garbage cans for bio-waste and the potential environmental-hygienic danger connected with it, considerable worries have been expressed recently. A wide spectrum of mold fungi can be found in bio-waste in strongly varying concentrations. No noticeable difference could be ascertained between the settlement structure areas and the cities respectively as to the fungus concentration in the bio-waste substrate. A. fumigatus and A. niger can be recommended as leading spores for the behavior of the total concentration of fungi in the bio-waste due to their frequency of detection and their seasonal dynamism. The intensity of the air spore pollution through emission of mold fungus spores correlates closely with the climatic conditions, such as variations of temperature, relative humidity and solar radiation. The airborne release of mold fungus spores out of garbage cans for bio-waste and the formation of a respective exposure connected with it is judged as harmless for healthy persons. Risk patients and persons having a weakened immune system or assumed to have such a one due to an existent basic illness and/or other reasons should avoid any handling of bio-waste as well as any other waste if possible.

Air Microbiology↗

Waste treatment technologies from the Genesearch Group of companies.

Genesearch is a 10 year old research and development company of Australian scientists, specializing in microbiology and genetics. This research expertise has formed the basis of a number of microbial processes for waste treatment. In addition, a novel type of high yield fermenter for aerobic bacteria allows the economical production of high-potency bacterial preparations for waste treatment processes. A novel approach to the rapid biodegradation of polychlorinated biphenyls has been developed. Photochemical pretreatment partially dechlorinates the molecules, rendering them susceptible to complete and rapid digestion by wild-type soil bacteria. In the area of non-toxic waste, Genesearch has developed products for on-site treatment of, for example, grease-trap wastes and waste oil in ship bilges; and a large scale process for conversion of municipal grease wastes into protein-rich biomass. The prospects for novel biological waste treatment are improving, as public pressure grows, and as increasing government monitoring and penalties make inadequate waste disposal uneconomic.

Bacteria, Aerobic↗