PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Particulate Matter”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources
PubMed2006

Numerical investigation of airflow pattern and particulate matter transport in naturally ventilated multi-room buildings.

UNLABELLED: This study reports on a numerical investigation of transport behavior of indoor airflow and size-dependent particulate matter (PM) in multi-room buildings. An indoor size-dependent PM transport approach, combining the Eulerian large-eddy simulation of turbulent flow with the Lagrangian particle trajectory tracking, was developed to investigate indoor airflow pattern and PM1/PM2.5/PM10 removal efficiency in naturally ventilated multi-room buildings. A displacement ventilation with a measured indoor PM10 profile in Taipei Metropolis as the initial condition was carried out to characterize spatial and temporal variations of indoor PM1/PM2.5/PM10 removal behavior. The effects of indoor airflow pattern on particle transport mechanisms, e.g., deposition, suspension, migration and escape, were analyzed. Two comparison scenarios, which considered the effects of no indoor partition and different air change rate, respectively, were also conducted. In comparison with the effectiveness of PM1/PM2.5/PM10 removal, the simulated results showed that coarse particles were easier to be removed out of the building than fine particles. Natural ventilation was not an effective way to remove fine particles such as PM1 and PM2.5 in a multi-room building. Indoor partitions can impede 12% of the mean streamwise velocities and significantly increase 30-50% turbulence intensities. However, indoor partitions increased particle deposition and decreased particle escape. As a result of the two opposite particle removal mechanisms, i.e., deposition and escape, the impact of indoor partitions on PM1/PM2.5/PM10 removal behavior was not as significant as the results of airflow velocities. PRACTICAL IMPLICATIONS: This work developed a computational fluid dynamics technique to investigate indoor airflow patterns and PM1/PM2.5/PM10 removal ability in ventilated multi-room buildings. The results of this paper can help to identify adequate PM1/PM2.5/PM10 cleaning procedure and provide useful size-dependent PM control strategy in multi-room buildings.

Air Movements↗
PubMed2002

Surface components of airborne particulate matter induce macrophage apoptosis through scavenger receptors.

Epidemiology studies have linked mortality, increased asthma morbidity, and other respiratory disorders in urban areas to increases in fine airborne particulate matter (PM) concentrations. However, neither the bioactive components of PM nor the biological mechanisms of the reported health effects have been elucidated. A number of studies have implicated soluble metals, the strong acid fraction, and/or other components of PM as possible bioactive mediators. Alveolar macrophage (AM) apoptosis, mediated through scavenger receptors (SR), may be important in the response to inflammatory particles. Therefore, this study explores the hypothesis that organic and metallic components of PM induce apoptosis by interacting with SR. Freshly isolated AM from Balb/c mice were incubated with PM 1648 samples untreated or extracted with Milli-Q water, acetone, or cyclohexane, acid digested, or heated at 100 or 500 degrees C. Cell viability was assessed by trypan blue exclusion and apoptosis was demonstrated by examination of cell morphology and cell death ELISA. Untreated PM induced necrosis and apoptosis in AM. Treatment of PM by organic extraction, acid digestion, or high heat modified the particle surface composition and apoptosis was decreased. Apoptosis induced by untreated, acetone extracted, and high heat-treated PM was blocked by polyinosinic acid or 2F8 antibody. These results demonstrate that PM-induced apoptosis is mediated by Class A Type I/II SR. Altering the surface characteristics of PM interferes with recognition by SR, resulting in decreased apoptosis of AM. Therefore, altering the surface chemistry by removal of one or more PM components, such as the various treatments conducted in this study, is sufficient to alter PM bioactivity. These results may also help explain why PM from many different sources, with differences in composition, are all bioactive, since it is the overall matrix that is important, not just one component.

Air Pollutants↗
PubMed1989

Total particulate matter and nicotine in Indian bidis and cigarettes: a comparative study of standard machine estimates and exposure levels in smokers in Bombay.

Standard emission levels of total particulate matter (TPM) and nicotine in bidi and cigarette smoke were compared with exposure levels based on smoking behaviour of smokers in Bombay. Bombay cigarette smokers are getting much higher amount of carcinogenic dry TPM (28 to 79%) and nicotine (31 to 104%), compared to standard machine estimates. In the case of regular bidi (60 mm) harmful ingredients like dry TPM decreased from 11 to 15 percent and nicotine increased from 11 to 22 percent, whereas long bidi (80 mm) delivered higher amount of dry TPM (14 to 22%) and nicotine (33 to 37%) in smokers in Bombay compared to standard machine estimates.

Equipment and Supplies↗
PubMed2001

Application of micro-scale sealed vessel thermal desorption-gas chromatography-mass spectrometry for the organic analysis of airborne particulate matter: linearity, reproducibility and quantification.

Micro-scale sealed vessel thermal desorption-gas chromatography-mass spectrometry (MSSV-TD-GC-MS) has been applied to the analysis of airborne particulate matter using the US NIST Standard Reference Material (SRM1649a) urban dust. We make qualitative comparisons with open system desorption and illustrate that caution should be used when using the technique without an open system comparison. We report linear responses over the same particulate mass range (1-5 mg) and good reproducibility [SD< or =0.62 mg kg(-1) (< or = 11%)]. We show linearity for a series of 10 n-alkanes and 10 polycyclic aromatic hydrocarbons (PAHs) in the SRM. The technique is also shown to be quantifiable (PAH concentrations typically 4-6 mg kg(-1)).

Gas Chromatography-Mass Spectrometry↗
PubMed2002

Particulate matter and particle-attached polycyclic aromatic hydrocarbons in the indoor and outdoor air of Tokyo measured with personal monitors.

Using two types of personal monitors for suspended particulate matter of diameter under 10 microm (PM-10) and for particles of diameter under 1 microm with attached polycyclic aromatic hydrocarbons (PPAH), we measured the PM-10 and PPAH concentrations in the indoor and outdoor air in various locations in the Tokyo area. The major findings were as follows. (1) The PPAH concentrations in a clean living room increased rapidly within several minutes after one cigarette was smoked. (2) Using the average indoor concentrations of PM-10 and PPAH in a department store as control concentrations, respectively, where the average indoor PM-10 concentration was closest to an annual average outdoor concentration in Japan, the mean value for indoor air concentrations of PM-10 by location ranged from 2.2 to 6.2 times the control concentration, and the mean value for indoor air concentrations of PPAH by location ranged from 1.0 to 32.2 times the control concentration. (3) Using the same control concentrations, the mean value of outdoor concentrations of PM-10 by location ranged from 1.6 to 8.5 times the control concentration, while the mean value of outdoor concentrations of PPAH by location were up to 353.7 times the control concentration. The major polluted places were main traffic roads, highways, and street tunnels. (4) The correlation coefficient between the PM and the PPAH concentrations in the total monitoring time was 0.014, which was not significant (P>0.05).

Air Pollutants↗
PubMed2005

Sorption of small metabolites of nonylphenol polyethoxylates in single and complex systems on aquatic suspended particulate matter.

Sorption of nonylphenol (NP), nonylphenol monoethoxylate (NP1EO) and nonylphenol diethoxylate (NP2EO) as well as their binary and ternary mixtures were studied and compared on three simulated suspended particulate matters (SPMs). Sorption dynamics of NP on the three SPMs could be divided into two phases, the rapid sorption phase and the slow sorption phase. A third phase, 'apparent desorption' occurred before the slow sorption phase for NP1EO and NP2EO as well as for all mixtures. Initial sorption rate increased with the OC% content of the SPMs. At low concentration, the sorption of NP, NP1EO and NP2EO (only at low concentration for 3# SPM) followed linear isotherm on the three SPMs. The linear Kd value of NP or NP1EO increased with the OC% content of SPM. In mixtures, sorption of NP, NP1EO and NP2EO increased significantly, and a 'critical point', after which sorption increased significantly, was observed in certain sorption isotherms.

Adsorption↗
PubMed2005

Polycyclic aromatic hydrocarbons in suspended particulate matter and sediments from the Pearl River Estuary and adjacent coastal areas, China.

The spatial distribution, composition, and sources of polycyclic aromatic hydrocarbons (PAHs) in sediments and suspended particulate matter (SPM) from the Pearl River Estuary and adjacent coastal areas were examined. Total PAH concentrations varied from 189 to 637 ng/g in sediments and 422 to 1,850 ng/g in SPM. PAHs were dominated by 5,6-ring compounds in sediments and by 2,3-ring compounds in SPM samples. Assessment of PAH sources suggested that biomass and coal combustion is the major PAH source to the outer part of the estuary sediments and that petroleum combustion is the major PAH source to the inner part of estuary sediments. As for SPM samples, PAH isomer pair ratios indicated multiple (petroleum, petroleum combustion, and biomass and coal combustion) PAH sources, and significant temporal variations could exist for the sources of water column PAHs in the study area. The distribution of perylene in SPM samples indicated that the river was the dominant source of perylene in SPM and that perylene could be taken as an index to assess the contribution of river inflow to the total PAHs in SPM samples. The high concentration of perylene in the sediment was indicative of an in situ biogenic origin.

Biomass↗
PubMed2002

Metals in airborne particulate matter from the first and second industrial complex area of Taejon city, Korea.

To understand the metal distribution characteristics in a rapidly urbanized area, we collected and analyzed particulate matter (PM) samples for the metal concentrations. Using our measurement data for various metal species, we examined both the extent of metal pollution in the study area and the seasonality in their distribution characteristics. Results showed that each metal exhibited their occurrences in diverse concentration ranges over several orders of magnitude such as the mean values ranging from minimum value of 0.07 (Be) to maximum value of 1633 ng m(-3) (Fe). In addition, the extent of metal pollution in the study area was in general comparable with those typically observed from a strongly polluted urban area, if comparison was made with the results of previous studies. Examinations of their temporal distribution patterns indicated that most of metals tend to exhibit seasonal peaks during winter (or spring) seasons, similarly to the observed pattern for PMs. Moreover to explain the factors regulating their mobilization properties, the data were analyzed through the application of correlation analysis. Results of our correlation analysis showed that most metals can exhibit strong positive correlations each other, while they tend to be inversely correlated with most of important meteorological parameters (including air temperature and precipitation). Based on the overall results of our study, we conclude that the site may be strongly impacted by man-made sources but that many characteristics of their cycling are not significantly different from those generally observed from natural environments.

Air Pollutants↗
PubMed2004

Environmental fine particulate matter (PM 2.5) activates the RAW 264.7 macrophage cell line even at very low concentrations as revealed by 1H NMR.

Because of the association between inhalation of airborne particulate matter (PM) and human respiratory and cardiovascular disease, it is necessary to understand the tissue damage induced by these particles. One of the cell types principally involved in the body's reaction to PM are macrophages, which remove particles in the airway passages and the lungs through phagocytosis. In fact, when macrophages are exposed to a toxic agent such as PM, they undergo a series of changes (including variations in morphology, an increase in glycolysis, and consequent lactate production and the release of cytokines such as interleukin-6 and tumor necrosis factor-alpha) necessary to transform them from "resting" to "activated" macrophages. Because (1)H NMR is extremely useful in monitoring, noninvasively, macrophage metabolism and because this technique has never been utilized to examine macrophage activation after exposure to PM, it was the purpose of the present study to investigate the effects of PM exposure on the RAW 264.7 stabilized macrophage cell line using (1)H NMR spectroscopy. PM with a diameter <2.5 microm (PM 2.5) was utilized because a closer association to mortality and adverse respiratory health effects has been found with this fraction than with particles of a larger size. Measurements were conducted on whole cells at both 500 and 700 MHz as well as on perchloric acid extracts at 700 MHz. Significant variations in numerous metabolites were seen at very low concentrations of PM 2.5. Many of these changes point to activation of RAW 264.7 macrophages even at doses of PM 2.5 much lower than those commonly employed in cell studies. These results are particularly significant since the same concentrations of PM did not induce changes in morphology and release of cytokines in these cells. Therefore, (1)H NMR spectroscopy is an extremely sensitive probe in observing subtle variations in macrophages after exposure to PM 2.5.

Air Pollution↗
PubMedDate not supplied

Characterization of metal-ion-nucleotide based particulate matter in solutions of 9-[2-(phosphonomethoxy)ethyl]adenine (PMEA).

The antiviral drug 9-[2-(phosphonomethoxy)ethyl]adenine, PMEA, was developed as an intravenous product for the treatment of human immunodeficiency virus infection. During the course of stability monitoring, PMEA i.v. injection was found to undergo particulate matter formation under extended storage at ambient temperature. Isolation and characterization of the particulates revealed them to be metal ion-PMEA complexes. The principle metal ions associated with the particulates were iron and zinc, present as trace impurities (< or = 40 ppm) in PMEA drug substance determined by inductively coupled argon plasma spectroscopy. These visible particles are characterized by energy-dispersive x-ray spectrometry and fourier transform infrared spectroscopy. This study describes the systematic evaluation of the observed solution phenomena and details alternative formulation systems to eliminate particulate formation in the PMEA injectable product.

Adenine↗
PubMed2002

Modeling nucleation and coagulation modes in the formation of particulate matter inside a turbulent exhaust plume of a diesel engine.

This paper presents the results from a study that is aimed at predicting the nucleation, coagulation, and dynamics of particulate matter (PM) emissions from on-road heavy-duty diesel vehicles. The PM concentration is predicted from the composition of fuel, and operating and ambient conditions. A numerical algorithm for simultaneously solving the coagulation, condensation, and nucleation equations is developed. The effect of relative humidity on the nucleation rate and the nucleus size is also discussed. In addition, the effect of the ambient air dilution on PM size distribution is numerically predicted for a diesel-powered truck operating in a controlled environment at NASA Langley wind-tunnel facility. The particle size distribution and concentration are measured at four different locations in a turbulent plume from the diesel exhaust in the tunnel, and an excellent agreement between the measured and predicted PM concentration values at these locations inside the tunnel is observed.

Journal Article↗
PubMed2006

Determination of polycyclic aromatic sulfur heterocycles in diesel particulate matter and diesel fuel by gas chromatography with atomic emission detection.

The sulfur content of diesel fuel is of environmental concern because sulfur can facilitate the formation of diesel particulate matter (DPM) and sulfur dioxide (SO2) in the exhaust can poison catalytic converters. The US Environmental Protection Agency (EPA) has established more stringent regulations to reduce the sulfur content of diesel fuels in the near future. In this study, various types of organosulfur compounds in DPM extracts and the corresponding fuels have been determined by gas chromatography with atomic emission detection. The diesel fuels used have sulfur contents of 2284 and 433 ppm, respectively, and are labeled as high-sulfur and low-sulfur diesel fuels. The compounds identified are mainly polycyclic aromatic sulfur heterocycles (PASHs). In the fuels tested, trimethylbenzothiophenes (TMBTs), dibenzothiophenes (DBTs), and 4-methyldibenzothiophene (4-MDBT) were the most abundant sulfur compounds, while larger PASH compounds were more abundant in DPM extracts. The high-sulfur diesel fuel contained a larger proportion of PASHs with one or two rings (lighter PASHs). In DPM, the concentrations of total organic sulfur and individual PASHs are higher for the high-sulfur diesel fuel, and the relative percentage of one or two-ring PASHs is higher as well. The influence of engine load on the DPM composition was also examined. With increasing load, the PASH concentration in DPM decreased for lighter PASHs, increased for heavier PASHs, and had a bell-shaped distribution for PASHs in between.

Chromatography, Gas↗
PubMed2005

An investigation of the treatment of particulate matter from gasoline engine exhaust using non-thermal plasma.

A plasma reactor with catalysts was used to treat exhaust gas from a gasoline engine in order to decrease particulate matter (PM) emissions. The effect of non-thermal plasma (NTP) of the dielectric discharges on the removal of PM from the exhaust gas was investigated experimentally. The removal efficiency of PM was based on the concentration difference in PM for particle diameters ranging from 0.3 to 5.0 microm as measured by a particle counter. Several factors affecting PM conversion, including the density of plasma energy, reaction temperature, flow rate of exhaust gas, were investigated in the experiment. The results indicate that PM removal efficiency ranged approximately from 25 to 57% and increased with increasing energy input in the reactor, reaction temperature and residence time of the exhaust gas in the reactor. Enhanced removal of the PM was achieved by filling the discharge gap of the reactor with Cu-ZSM-5 catalyst pellets. In addition, the removal of unburned hydrocarbons was studied. Finally, available approaches for PM conversion were analyzed involving the interactions between discharge and catalytic reactions.

Air Pollution↗
PubMed2006

Activation of different pathways of apoptosis by air pollution particulate matter (PM2.5) in human epithelial lung cells (L132) in culture.

Epidemiological studies have associated the increase of respiratory and cardiovascular mortality and morbidity with high levels of air pollution particulate matter (PM). However, the underlying mechanisms of actions by which PM induce adverse health effects are still unclear. We have recently undertaken an extensive investigation of the adverse health effects of air pollution PM(2.5), and shown that in vitro short-term exposure to PM(2.5) induced oxidative stress and inflammation in human lung epithelial cells (L132). Hence, it was convenient to complete the physical and chemical characterization of PM and to investigate whether in vitro short-term exposure to PM could be imply in the activation of apoptosis. Accordingly, we found that 92.15% of PM were equal or smaller than 2.5 microm and their specific surface area was 1m(2)/g. Inorganic (i.e. Fe, Al, Ca, Na, K, Mg, Pb, etc.) and organic (i.e. polycyclic aromatic hydrocarbons) chemicals were found in PM, suggesting that much of them derived from wind-borne dust from the industrial complex and the heavy motor vehicle traffic. In other respects, we showed that PM exposure induced apoptosis by activating not only the tumor necrosis factor-alpha (TNF-alpha)-induced pathway (i.e. TNF-alpha secretion, caspase-8 and -3 activation), but also the mitochondrial pathway (i.e. 8-hydroxy-2'-desoxyguanosine formation, cytochrome c release from mitochondria, caspase-9 and -3 activation). Moreover, changes in the transcription rates of p53, bcl-2, and bax genes, on the one hand, and DNA fragmentation, on the other hand, were reported in PM-exposed proliferating L132 cells, revealing the occurrence of apoptotic events. Taken together, these findings suggested that in vitro short-term exposure to PM(2.5) induced apoptosis in L132 cells.

8-Hydroxy-2'-Deoxyguanosine↗
PubMed2006

Correlation of in vitro cytokine responses with the chemical composition of soil-derived particulate matter.

We treated human lung epithelial cells, type BEAS-2B, with 10-80 microg/cm2 of dust from soils and road surfaces in the western United States that contained particulate matter (PM) < 2.5 microm aerodynamic diameter. Cell viability and cytokine secretion responses were measured at 24 hr. Each dust sample is a complex mixture containing particles from different minerals mixed with biogenic and anthropogenic materials. We determined the particle chemical composition using methods based on the U.S. Environmental Protection Agency Speciation Trends Network (STN) and the National Park Service Interagency Monitoring of Protected Visual Environments (IMPROVE) network. The functionally defined carbon fractions reported by the ambient monitoring networks have not been widely used for toxicology studies. The soil-derived PM2.5 from different sites showed a wide range of potency for inducing the release of the proinflammatory cytokines interleukin-6 (IL-6) and IL-8 in vitro. Univariate regression and multivariate redundancy analysis were used to test for correlation of viability and cytokine release with the concentrations of 40 elements, 7 ions, and 8 carbon fractions. The particles showed positive correlation between IL-6 release and the elemental and pyrolyzable carbon fractions, and the strongest correlation involving crustal elements was between IL-6 release and the aluminum:silicon ratio. The observed correlations between low-volatility organic components of soil- and road-derived dusts and the cytokine release by BEAS-2B cells are relevant for investigation of mechanisms linking specific air pollution particle types with the initiating events leading to airway inflammation in sensitive populations.

Air Pollutants↗
PubMed2003

[Occurrence of metals in various size fractions of particulate matter].

Size distributions of trace metals of specific health concern (Pb, Cd, Cr, Ni, Cd, V, Zn and Fe) in the fine (PM2.5) and coarse (PM2.5-10) fractions of suspended particulate matter were evaluated. Samples were collected through a year in three sites (traffic oriented and urban background in the urban area of Rome, and remote, in the Regional Park of Simbruini Mountains). Mean concentrations never exceeded the values recommended by WHO and EU. During winter season, levels of Cr, Cd, Pb and Zn resulted higher than in summer, in both fine and coarse fractions. The series of Pb, Cd, and V concentrations clearly showed a predominant fine-particle distribution, whereas Cr, Mn and Ni were more equally distributed between the coarse and fine fractions. Fe prevailed in the coarse mode at the urban sites. At the urban sites mean concentrations of the different metals were from 4 to 22 times higher than at the remote site. For various metals the distribution mode, as well as the seasonal trends of the concentrations, showed significant differences between urban and remote site. In busy and densely populated urban areas, without relevant industrial emissions, anthropogenic sources of metallic species seem still to give a contribution to air pollution, though a trend downwards, compared to previous surveys, was observed, particularly for Pb.

Air Pollution↗
PubMed2003

High levels of airborne ultrafine and fine particulate matter in indoor ice arenas.

The high prevalence of airway dysfunction among ice arena athletes may be related to rink air exposure; in particular, high concentrations of ultrafine and fine particulate matter (0.02-1.0 micro m diameter, PM(1)) from ice resurfacing machines may enhance airway inflammation and hyperreactivity. The purpose of this study was to identify levels of PM(1) emitted from ice resurfacing machines used in indoor ice arenas, and to compare [PM(1)] pre- and post-resurfacing to each other and to outdoor [PM(1)]. Multiple one Hz measurements were recorded on 28 different days as 15-s mean of PM(1).cm(-3) for 2 min at 1-1.5 m "above ice" in 10 rinks pre- and post-resurfacing, with measured airborne PM(1) outside each rink to be used individual rink references. Rink PM(1).cm(-3) was approximately 30 times greater than PM(1).cm(-3) outside the respective rinks (p <.05). Rink values were 104.2 +/- 59.3 x 10(3) PM(1).cm(-3) during prime usage, compared to outdoor values of 3.8 +/- 2.5 x 10(3) PM(1).cm(-3). Ice resurfacing increased PM(1).cm(-3) 4-fold (p <.05). No difference in PM(1) emissions between gasoline and propane powered resurfacing machines was identified. The rate of PM(1) dissipation after resurfacing was highly variable between rinks and probably dependent upon rink ventilation and resurfacing machine engine efficiency. Gas-powered edging increased PM(1).cm(-3) 18-fold and 158-fold versus pre-edging rink and outdoor values, respectively. We conclude that the primary source of airborne indoor rink PM(1) is internal combustion ice-resurfacing machines and that this poor air quality may be causal to the unique and high prevalence of airway dysfunction in ice arena athletes.

Air Pollutants↗