PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Phase Separation”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources
PubMed2004

Relevance of cooperative lattice effects and stress fields in phase-separation theories for CMR manganites.

Previous theoretical investigations of colossal magnetoresistance (CMR) materials explain this effect using a "clustered" state with preformed ferromagnetic islands that rapidly align their moments with increasing external magnetic fields. While qualitatively successful, explicit calculations indicate drastically different typical resistivity values in two- and three-dimensional lattices, contrary to experimental observations. This conceptual bottleneck in the phase-separated CMR scenario is resolved here considering the cooperative nature of the Mn-oxide lattice distortions. This effectively induces power-law correlations in the quenched disorder used in toy models with phase competition. When these effects are incorporated, resistor-network calculations reveal very similar results in two and three dimensions, qualitatively modifying previous scenarios and solving the puzzle.

Journal Article↗
PubMed1977

Surface phase separation and collapse of the stearate anion--alkaline earth cation complex.

The surface properties of fatty acid and fatty acid-alcohol mixtures were examined at 22-24 degrees C. At pH 12, sodium stearate forms a rigid surface film that generates an equilibrium spreading pressure of 16.5 dynes/cm. At pH 12, stearate-alkaline earth cation films collapse at the air-water interface and do not generate significant equilibrium spreading pressures. The rate of film collapse depends on the counterion decreasing in the sequence Ba2+ greater than Sr2+ greater than Ca2+. Stearate-stearyl alcohol mixtures form solid (condensed) films that are relatively stable and behave initially as homogeneous surfaces in their selectivities for counterions. Stearate-oleyl alcohol mixtures form fluid (expanded) films that are unstable. Lateral phase separations occur rapidly in fluid films and the stearate-alkaline earth cation phase collapses. The rate of film collapse in the fluid mixtures also depends on the counterion decreasing in the sequence Ba2+ greater than Ca2+. These surface properties suggest how a lipid anion may function as an ionophore in the translocation of alkaline earth cations.

Barium↗
PubMed2004

Singlet oxygen microscope: from phase-separated polymers to single biological cells.

The lowest excited electronic state of molecular oxygen, singlet molecular oxygen (a1Deltag), is an intermediate in many chemical and biological processes. Tools and methods have been developed to create singlet-oxygen-based optical images of heterogeneous samples that range from phase-separated polymers to biological cells. Such images provide unique insight into a variety of oxygen-dependent phenomena, including the photoinitiated death of cells.

Cells↗
PubMed2004

Early sedimentation and crossover kinetics in an off-critical phase-separating liquid mixture.

Early sedimentation in a liquid mixture off-critically quenched in its miscibility gap was investigated with a light attenuation technique. The time evolution of the droplet distribution is characteristic of an emulsion coalescing by gravitational collisions. This sedimentation behavior gave access to the phase-separating kinetics, and a crossover on the way toward equilibrium was observed, which separates free growth from conserved order-parameter coarsening with a crossover time fitting well with theoretical predictions.

Journal Article↗
PubMed1984

Phase separation between nucleoid and cytoplasm in Escherichia coli as defined by immersive refractometry.

The refractive indices of nucleoid and cytoplasm in Escherichia coli were derived theoretically and experimentally. For the theoretical estimates, we made use of the known macromolecular composition of E. coli B/r (G. Churchward and H. Bremer, J. Theor. Biol. 94:651-670, 1982) and of estimates of cell and nucleoid volumes. These were obtained from micrographs of living bacteria made with a confocal scanning light microscope. The theoretical values were calculated, assuming that all DNA occurred in the nucleoid and that all protein and RNA occurred in the cytoplasm. Comparison with experimental refractive index values directly obtained by immersive refractometry showed that, besides its DNA, the nucleoid must contain an additional amount of solids equivalent to 8.6% (wt/vol) protein. With the nucleoid containing 6.8% (wt/vol) DNA and 8.6% (wt/vol) protein and the cytoplasm containing 21% (wt/vol) protein and 4% (wt/vol) RNA, a mass difference is obtained, which accounts for the phase separation observed between the nucleoid and cytoplasm in living cells by phase-contrast microscopy. The decrease in the refractive index of the nucleoid relative to that of the cytoplasm observed upon, for instance, OsO4 fixation was interpreted as being indicative of the loss of protein content in the nucleoid.

Chloramphenicol↗
PubMed1998

Bovine serum albumin adsorption onto immobilized organotrichlorosilane surface: influence of the phase separation on protein adsorption patterns.

Octadecyltrichlorosilane (OTS) and [2-(perfluorooctyl)ethyl]trichlorosilane (FOETS) monolayers and their mixed monolayer were polymerized on a water subphase and subsequently immobilized onto a silicon wafer surface by covalent bonding. Atomic force microscopic (AFM) observation of the mixed (OTS/FOETS) monolayer revealed the formation of a phase-separated structure. Protein-adsorption behavior onto the monolayers was investigated in situ on the basis of an attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopic flow cell method and the morphology of the monolayer surface-adsorbed bovine serum albumin (BSA) was observed by AFM. Protein adsorption behavior observed by ATR-FT-IR flow cell method revealed that the amount of BSA adsorption onto the OTS and FOETS monolayers increased remarkably at an initial experimental stage and attained a steady state within a few minutes at pH 7.5. The amount of steady state adsorption was c. 0.18-0.2 microgcm(-2). AFM observation of the monolayer after exposure to BSA solution suggested that BSA adsorbed in the end-on adsorption state on OTS monolayer and side-on one in the FOETS monolayer, respectively. However, in the case of the mixed (OTS/FOETS) monolayer, ATR-FT-IR flow cell experiment revealed that the amount of steady state adsorption of BSA was suppressed. Also, AFM observation revealed that at pH 7.5, BSA preferentially adsorbed onto the FOETS phase of the mixed (OTS/FOETS) monolayer, which had a higher interfacial free energy against water. On the other hand, BSA adsorbed homogeneously onto the OTS and FOETS phases at the isoelectric point of BSA (pH 4.7). These results indicate that the preferential adsorption of BSA onto the FOETS phase in the mixed (OTS/FOETS) monolayer system is due to: (1) the minimization of the interfacial free energy between a monolayer surface and an aqueous solution; and (2) the electrostatic repulsion between BSA molecules bearing negative charges.

Adsorption↗
PubMed2005

Confined crystallization in phase-separated poly(ethylene terephthalate)/poly(ethylene naphthalene 2,6-dicarboxilate) blends.

The isothermal cold crystallization of poly(ethylene terephthalate)(PET) in cryogenic mechanical alloyed blends of PET and Poly(ethylene naphthalene 2,6-dicarboxilate)(PEN) 1:1 by weight has been investigated by simultaneous small and wide angle X-ray scattering (SAXS and WAXS) and dielectric spectroscopy (DS). For transesterification levels higher than 23% the blends tend to transform into a one-phase system and the crystallization of PET is strongly inhibited due to the significant reduction of the PET segment length. For lower levels of transesterification the blends are phase separated and the overall crystallization behaviour can be explained considering the confined nature of the PET domains in these blends. The formation of a rigid amorphous phase in the intra-lamellar stack amorphous regions is reduced in the blends due to a lower probability of stack formation in the confined PET-rich domains. The more effective filling of the space by the lamellar crystals in the blends provokes a stronger restriction to the amorphous phase mobility of PET in the blends than in pure PET.

Biocompatible Materials↗
PubMed2005

Two-dimensional gas-phase separations coupled to mass spectrometry for analysis of complex mixtures.

Ion mobility spectrometry (IMS) has been explored for decades, and its versatility in separation and identification of gas-phase ions is well established. Recently, field asymmetric waveform IMS (FAIMS) has been gaining acceptance in similar applications. Coupled to mass spectrometry (MS), both IMS and FAIMS have shown the potential for broad utility in proteomics and other biological analyses. A major attraction of these separations is extremely high speed, exceeding that of condensed-phase alternatives by orders of magnitude. However, modest separation peak capacities have limited the utility of FAIMS and IMS for analyses of complex mixtures. We report 2-D gas-phase separations that join FAIMS to IMS, in conjunction with high-resolution and accuracy time-of-flight (TOF) MS. Implementation of FAIMS/IMS and IMS/MS interfaces using electrodynamic ion funnels greatly improves sensitivity. Evaluation of FAIMS/IMS/TOF performance for a protein mixture tryptic digest reveals high orthogonality between FAIMS and IMS dimensions and, hence, the benefit of FAIMS filtering prior to IMS/MS. The effective peak capacities in analyses of tryptic peptides are approximately 500 for FAIMS/IMS separations and approximately 10(6) for 3-D FAIMS/IMS/MS, providing a potential platform for ultrahigh-throughput analyses of complex mixtures.

Gases↗
PubMed2002

Obstructed diffusion in phase-separated supported lipid bilayers: a combined atomic force microscopy and fluorescence recovery after photobleaching approach.

Proteins and other macromolecules are believed to hinder molecular lateral diffusion in cellular membranes. We have constructed a well-characterized model system to better understand how obstacles in lipid bilayers obstruct diffusion. Fluorescence recovery after photobleaching was used to measure the lateral diffusion coefficient in single supported bilayers composed of mixtures of 1,2-dilauroylphosphotidylcholine (DLPC) and 1,2-distearoylphosphotidylcholine (DSPC). Because these lipids are immiscible and phase separate at room temperature, a novel quenching technique allowed us to construct fluid DLPC bilayers containing small disk-shaped gel-phase DSPC domains that acted as obstacles to lateral diffusion. Our experimental setup enabled us to analyze the same samples with atomic force microscopy and exactly characterize the size, shape, and number of gel-phase domains before measuring the obstacle-dependent diffusion coefficient. Lateral obstructed diffusion was found to be dependent on obstacle area fraction, size, and geometry. Analysis of our results using a free area diffusion model shows the possibility of unexpected long-range ordering of fluid-phase lipids around the gel-phase obstacles. This lipid ordering has implications for lipid-mediated protein interactions in cellular membranes.

Cell Membrane↗
PubMed2000

Unbinding transitions and phase separation of multicomponent membranes.

Multicomponent membranes in contact with another surface or wall are studied by a variety of theoretical methods and Monte Carlo simulations. The membranes contain adhesion molecules which are attracted to the wall and, thus, act as local stickers. It is shown that this system undergoes lateral phase separation leading to discontinuous unbinding transitions if the adhesion molecules are larger than the nonadhesive membrane components. This process is driven by an effective line tension which depends on the size of the stickers and arises from the interplay of shape fluctuations and sticker clusters.

Cell Adhesion Molecules↗
PubMed1993

Ca(2+)-induced lateral phase separation in black lipid membranes and its coupling to the ion translocation by gramicidin.

We analyze the single-channel current fluctuations of gramicidin incorporated into biomolecular lipid membranes (BLM) of binary mixtures of phosphatidylcholine (PC) and phosphatidylglycerol (PG) as a function of the Ca2+ concentration in the electrolyte (0.5 M CsCl, pH 6) solution. At low Ca2+ levels (cCa2+ < 10(-6) M) a monomodal conductance histogram and a single average lifetime suggests a homogeneous mixture over the full range of composition (PG(1-x)PCx, 0 < or = x < or = 1). At higher Ca2+ concentrations phase separation processes are inferred from the appearance of bimodal conductance histograms. The two channel populations (in the two coexisting phases) can also be distinguished through their different average lifetimes. By a systematic variation of the mole fractions of the two lipid components we derive the respective phase boundaries and thus the full Ca2+ concentration-composition phase diagram.

Calcium↗
PubMed2006

Cellular response to phase-separated blends of tyrosine-derived polycarbonates.

Two-dimensional thin films consisting of homopolymer and discrete compositional blends of tyrosine-derived polycarbonates were prepared and characterized in an effort to elucidate the nature of different cell responses that were measured in vitro. The structurally similar blends were found to phase separate after annealing with domain sizes dependent on the overall composition. The thin polymer films were characterized with the use of atomic force microscopy (AFM), water contact angles, and time-of-flight secondary ion mass spectrometry (TOF-SIMS) and significant changes in roughness were measured following the annealing process. Genetic expression profiles of interleukin-1beta and fibronectin in MC3T3-E1 osteoblasts and RAW 264.7 murine macrophages were measured at several time points, demonstrating the time and composition-dependent nature of the cell responses. Real-time reverse transcriptase polymerase chain reaction (RT-PCR) depicted upregulation of the fibronectin gene copy numbers in each of the blends relative to the homopolymers. Moreover, the interleukin-1beta expression profile was found to be compositionally dependent. The data suggest strongly that optimal composition and processing conditions can significantly affect the acute inflammatory and extracellular matrix production responses.

Animals↗
PubMed2005

Creating structures in polymer blends via a dissolution and phase-separation process.

We show how three-dimensional structures can be formed in polymer blends from pre-existing structures. "Tape" of one polymer is inserted into a matrix of an alternative polymer to form an array of parallelepipeds. We subject this regular structure to partial dissolution in the one-phase region, before quenching the system into the two-phase region. The interplay between dissolution and phase separation can result in complex hierarchic structures. In particular, arrays of microchannels of one polymer species can be formed inside the other polymer.

Journal Article↗
PubMed2003

Enhancement of phase separation by the addition of de-emulsifiers to three-phase (diesel oil/biocatalyst/aqueous phase) emulsion in diesel biodesulfurization.

Ethanol, added as a de-emulsifier to separate oil and biocatalyst (or bacterial cells) from a three-phase (oil/biocatalyst/aqueous phase) emulsion, formed in diesel biodesulfurization employing Gordonia nitida, improved oil recovery by centrifugation from about 50% in its absence to almost 100% at 3% (v/v). The biocatalyst recovered with ethanol addition showed similar specific growth rates (0.03 h(-1)) and dibenzothiophene desulfurization rates (6-7.2 mol l(-1) h(-1)) to those (0.03 h(-1) and 7.1 mol l(-1), respectively) of the biocatalyst recovered with no ethanol addition. The desulfurization activity significantly increased as the number of the repeated recovery and reuse of the biocatalyst.

Actinomycetales↗
PubMed1993

Flow cytometric immunofluorescence assay for quantification of cyclobutyldithymine dimers in separate phases of the cell cycle.

Quantitative immunofluorescence assays for the measurement of cyclobutyldithymine dimers (T <> T) based on computer-assisted immunofluorescence microscopy have recently been described. Here we present a modified assay for T <> T based on flow cytometry. This method has the advantage that T <> T can be quantified in separate phases of the cell cycle by the fluorescent counterstaining of nuclear DNA and subsequent selection on DNA content. The H3 monoclonal antibody directed at T <> T binds to partially denatured DNA in situ. The antibody is labeled with fluorescein isothiocyanate (FITC) and DNA is stained with the intercalating dye 7-amino-actinomycin D. FITC fluorescence increases linearly with dose of UV-C radiation (up to 45 J/m2) of cultured human fibroblasts. A linear fluorescence-dose relationship was also found for epidermal cells of SKH:HR1 hairless mice after in vivo irradiation with UV-B (FS40 sunlamp, up to 3750 J/m2). This technique allows a quick assessment of UV damage levels in 10,000s of cells and makes immunofluorescence of DNA damage more accessible to other research groups.

Animals↗
PubMed1996

Partitioning of beta-mannanase and alpha-galactosidase from Aspergillus niger in Ucon/Reppal aqueous two-phase systems and using temperature-induced phase separation.

Enzyme partitioning and recovery with a new aqueous two-phase system based on commercially available hydroxypropyl starch Reppal PES 200 and the thermo-separating polymer Ucon 50-HB-5100 was studied. Ucon is an ethylene oxide-propylene oxide random copolymer. A culture supernatant of Aspergillus niger containing extracellular beta-mannanase and alpha-galactosidase was partitioned in two steps. The primary aqueous two-phase system contained Ucon and Reppal as phase forming polymers. The effect on enzyme partitioning of salt composition, salt concentration, pH and polymer concentration was studied with the aim of obtaining optimal partitioning of target enzymes to the phase containing the thermoseparating Ucon polymer. The partitioning of the enzymes could be strongly influenced by addition of the hydrophobic triethyl ammonium ion and the chaotropic perchlorate ion. Also the effect on cationic surfactant, cetyl trimethyl ammonium bromide, on enzyme partitioning was studied. In the second step, temperature induced phase separation was carried out on the isolated Ucon phase. A water phase and a concentrated aqueous Ucon phase were formed. The enzymes were obtained in the water phase almost free of polymer.

Aspergillus niger↗