SEARCH · PubMed Health

Results for “Biomass”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

PubMed2006

Zeta potential as a diagnostic tool to evaluate the biomass electrostatic adhesion during ion-exchange expanded bed application.

Expanded bed adsorption is an integrative technology in downstream processing allowing the direct capture of target proteins from biomass (cells or cell debris) containing feedstocks. Potential adhesion of biomass on the surface of adsorbent, however, may hamper the application of this technique. Since the electrostatic forces dominate the interactions between biomass and adsorbent, the concept of zeta potential was introduced to characterize the biomass/adsorbent electrostatic interactions during expanded bed application. The criterion of zeta potential evaluation proposed in the previous paper (Biotechnol Bioeng, 83(2):149-157, 2003) was verified further with the experimental validation. The zeta potential of intact cells and homogenates of four microorganisms (Escherichia coli, Bacillus subtilis, Pichia pastoris, and S. cerevisiae) were measured under varying pH and salt concentration, and two ion-exchange adsorbents (Streamline DEAE and Streamline QXL) were investigated. The biomass transmission index (BTI) from the biomass pulse response experiments was used as the indicator of biomass adhesion in expanded bed. Combining the influences from zeta potential of adsorbent (zeta(a)), zeta potential of biomass (zeta(b)) and biomass size (d), a good relationship was established between the zeta potential parameter (-zeta(a)zeta(b)d) and BTI for all experimental conditions. The threshold value of parameter (-zeta(a)zeta(b)d) can be defined as 120 mV2 microm for BTI above 0.9. This means that the systems with (-zeta(a)zeta(b)d) < 120 show neglectable electrostatic bio-adhesion, and would have a considerable probability of forming stable expanded beds in a biomass suspension under the particular experimental conditions.

Adsorption↗

PubMed2003

Evaluation of pulmonary changes due to biomass fuels using high-resolution computed tomography.

Biomass fuels are frequently used in rural areas of the world for cooking and heating frequently. It has been reported that the use of these fuels causes hazardous effects on the lungs. In this study, we evaluated the pulmonary changes due to the use of biomass fuels in a female population that lives in our territory by high-resolution computed tomography (HRCT). The study analyzed three groups of women. The first group comprised those subjects who were exposed to biomass without respiratory symptoms (group 1; n=32). The second group comprised those individuals that were exposed to biomass and showed respiratory symptoms, such as cough, sputum production, and dyspnea (group 2; n=30). The third group was composed of women who were not exposed to biomass and also had no respiratory symptoms (group 3; n=30). Women with a history of concomitant pulmonary diseases were excluded from the study. All groups were examined with HRCT. Groups 1 and 2 (individuals exposed to biomass fuels) had more pathologic findings than group 3 (not exposed to biomass fuels). Ground-glass appearance was seen in 71.9% in group 1, 23.3% in group 2, and 3.3% in group 3. The difference between the groups was statistically significant (p<0.05). Fibrotic bands were seen 50% in group 1, 63.3% in group 2, and only 6.7% in group 3 (p<0.001). Exposure to biomass fuels was the cause or predisposing factor for many pulmonary diseases, ranging from chronic bronchitis to diffuse lung diseases. We believe that these pathological changes due to biomass fuels can be detected earlier by HRCT and the diseases might be prevented or treated earlier.

Adult↗

PubMed2003

Sorption of cadmium(II) and zinc(II) ions from aqueous solutions by cassava waste biomass (Manihot sculenta Cranz).

The sorption of two divalent metal ions, Cd(II) and Zn(II), onto untreated and differentially acid-treated cassava waste biomass over a wide range of reaction conditions was studied at 30 degrees C. The metal ion removal from the spent biomass was also measured. The batch experiments show that pH 4.5-5.5 was the best range for the sorption of the metal ions for untreated and acid-treated biomass. Time-dependent experiments for the metal ions showed that for the two metals examined, binding to the cassava waste biomass was rapid and occurred within 30 min and completed within 1h. High sorption capacities were observed for the two metals. The binding capacity experiments revealed the following amounts of metal ions bound per gram of biomass: 86.68 mg/g Cd, 55.82 mg/g Zn and 647.48 mg/g Cd, 559.74 mg/g Zn for untreated and acid-treated biomass, respectively. It was further found that the rate of sorption was particle-diffusion controlled, and the sorption rate coefficients were determined to be 2.30 x 10(-1)min(-1) (Cd(2+)), 4.0 x 10(-3)min(-1) (Zn(2+)) and 1.09 x 10(-1)min(-1) (Cd(2+)), 3.67 x 10(-2)min(-1) (Zn(2+)) for 0.5 and 1.00 M differential acid treatment, respectively. Desorption studies showed that acid treatment inhibited effective recovery of metal ions already bound to the biomass as a result of stronger sulfhydryl-metal bonds formed. Less than 25% of both metals were desorbed as concentration of acid treating reagent increases. However, over 60% Cd and 40% Zn were recovered from untreated biomass during the desorption study. The results from these studies indicated that both untreated and acid-treated cassava waste biomass could be employed in the removal of toxic and valuable metals from industrial effluents.

Biodegradation, Environmental↗

PubMed2001

Measurement of biomass activity in drinking water biofilters using a respirometric method.

A simple respirometric method was developed and applied for the measurement of biomass activity in bench-scale drinking water biofilters. The results obtained with the new method, i.e. biomass respiration potential (BRP), indicated a high sensitivity allowing the quantification of the activity of low amounts of biomass. The analysis of duplicate samples showed a reasonable reproducibility, i.e. average coefficient of variation of 14% (n = 19). The calculation of the ratio between biomass activity and the amount of viable biomass (phospholipid) at different filter depths indicated a substantial increase of this ratio with filter depth. This indicated an increased biomass activity per unit amount of viable biomass deeper in the biofilters, where biofilm thickness is low. The comparison of the filter profiles of biomass activity and dissolved biodegradable organic matter (BOM), expressed as theoretical oxygen demand, showed a high correlation between these profiles. Consequently, BRP results appear to be good indicators of the BOM removal capacity of the filter biomass. Therefore, BRP results can potentially be used in certain cases instead of BOM measurements for the assessment of the BOM removal capacity of drinking water biofilters, operated under different conditions. This is important because of the relative complexity of the measurements of BOM surrogates, e.g. assimilable organic carbon and biodegradable dissolved organic carbon, and BOM components.

Biomass↗

PubMed2002

Biomass development in slow sand filters.

Microbial biomass development in the sand and schmutzdecke layer was determined in two full-scale slow sand filters, operated with and without a light excluding cover. A standard chloroform fumigation-extraction technique was adapted to routinely measure microbial biomass concentrations in the sand beds. Sand was sampled to a depth of 10 cm and schmutzdecke was also collected at the same random positions on the uncovered filter. Interstitial microbial biomass in the uncovered sand bed increased with time and decreased with sampling depth. There was a small accumulation of sand biomass with time in the covered filter, but no relationship was apparent between biomass concentration and depth in this filter. Schmutzdecke did not develop on the covered filter and was spatially highly variable in the uncovered condition compared to the consistent patterns observed in interstitial biomass production. It is speculated that microbial biomass in the sand of uncovered filters is largely related to carbon inputs from photosynthetic activity in the schmutzdecke and involves mechanisms that spatially distribute carbon substrate from the schmutzdecke to the sand. However, total organic carbon and dissolved organic carbon removals were similar in both filters suggesting that relatively small biomass populations in covered filters are sufficient to remove residual labile carbon during advanced water treatment and little further advantage to water purification and organic carbon removal is gained by the increased production of biomass in uncovered slow sand filter beds.

Biomass↗

PubMed2003

Studies on chromium(VI) adsorption-desorption using immobilized fungal biomass.

The aim of this study was to investigate the Cr(VI) biosorption potential of immobilized Rhizopus nigricans and to screen a variety of non-toxic desorbing agents, in order to find out possible application in multiple sorption-desorption cycles. The biomass was immobilized by various mechanisms and evaluated for removal of Cr(VI) from aqueous solution, mechanical stability to desorbents, and reuse in successive cycles. The finely powdered biomass, entrapped in five different polymeric matrices viz. calcium alginate, polyvinyl alcohol (PVA), polyacrylamide, polyisoprene, and polysulfone was compared for biosorption efficiency and stability to desorbents. Physical immobilization to polyurethane foam and coir fiber was less efficient than polymer entrapment methods. Of the different combinations (%, w/v) of biomass dose compared for each matrix, 8% (calcium alginate), 6% (polyacrylamide and PVA), 12% (polyisoprene), and 10% (polysulfone) were found to be the optimum. The Cr sorption capacity (mg Cr/g sorbent) of all immobilized biomass was lesser than the native, powdered biomass. The Cr sorption capacity decreased in the order of free biomass (119.2) > polysulfone entrapped (101.5) > polyisoprene immobilized (98.76) > PVA immobilized (96.69) > calcium alginate entrapped (84.29) > polyacrylamide (45.56), at 500 mg/l concentration of Cr(VI). The degree of mechanical stability and chemical resistance of the immobilized systems were in the order of polysulfone > polyisoprene > PVA > polyacrylamide > calcium alginate. The bound Cr(VI) could be eluted successfully using 0.01 N NaOH, NaHCO3, and Na2CO3. The adsorption data for the native and the immobilized biomass was evaluated by the Freundlich isotherm model. The successive sorption-desorption studies employing polysulfone entrapped biomass indicated that the biomass beads could be regenerated and reused in more than 25 cycles and the regeneration efficiency was 75-78%.

Adsorption↗

PubMed2004

Fire-related changes in biomass of hypogeous sporocarps at foraging points used by a tropical mycophagous marsupial.

Changes in pre- and post-fire biomass of hypogeous fungal sporocarps remaining at locations where an endangered mycophagous marsupial, the northern bettong (Bettongia tropica), had foraged, were assessed in fire-prone sclerophyll forest in northeastern Australia. Low to medium intensity experimental fires were set during the late dry season in 1995 and 1996 and post-foraging biomass of sporocarps (expressed as biomass of sporocarps remaining at recent B. tropica diggings) was measured at unburnt and burnt sites at approximately six-week intervals for a period of 14 months. Post-foraging biomass was significantly higher at burnt sites immediately following fire compared with control sites, solely due to increased biomass of hypogeous species belonging to the family Mesophelliaceae. Several months after fire, post-foraging biomass was significantly higher on unburnt sites compared with very low biomass on burnt sites. Twelve months after fire, the biomass on burnt and unburnt sites was not significantly different, having returned to biomass observed pre-fire. All evidence points toward mesophellioid fungi being greatly more available to bettongs on recently burnt ground, but fire may make several other sporocarp taxa considerably less available several months following fire.

Animals↗

PubMed2005

Biomass selection for optimal anaerobic treatment of olive mill wastewater.

This research was conducted to identify the most efficient biomass out of five different types of biomass sources for anaerobic treatment of Olive Mill Wastewater (OMW). This study was first focused on examining the selected biomass in anaerobic batch systems with sodium acetate solutions (control study). Then, the different types of biomass were tested with raw OMW (water-diluted) and with pretreated OMW by coagulation-flocculation using Poly Aluminum Chloride (PACl) combined with hydrated lime (Ca(OH)2). Two types of biomass from wastewater treatment systems of a citrus juice producing company "PriGat" and from a citric acid manufacturing factory "Gadot", were found to be the most efficient sources of microorganisms to anaerobically treat both sodium acetate solution and OMW. Both types of biomass were examined under different concentration ranges (1-40 g l(-1)) of OMW in order to detect the maximal COD tolerance for the microorganisms. The results show that 70-85% of COD removal was reached using Gadot biomass after 8-10 days when the initial concentration of OMW was up to 5 g l(-1), while a similar removal efficiency was achieved using OMW of initial COD concentration of 10 g l(-1) in 2-4 days of contact time with the PriGat biomass. The physico-chemical pretreatment of OMW was found to enhance the anaerobic activity for the treatment of OMW with initial concentration of 20 g l(-1) using PriGat biomass. This finding is attributed to reducing the concentrations of polyphenols and other toxicants originally present in OMW upon the applied pretreatment process.

Bacteria↗

PubMed2005

Degradation of Alyssum murale biomass in soil.

The Ni-hyperaccumulating plant Alyssum murale accumulates exceptionally high concentrations of nickel in its aboveground biomass. The reasons for hyperaccumulation remain unproven; however, it has been proposed that elemental alelopathy might be important. High-Ni leaves shed by the plant may create a "toxic zone" around the plant where germination or growth of competing plants is inhibited. The efficacy of this argument will partially depend upon the rate at which leaves degrade in soil and free metals are released, and the subsequent rate at which metals are bound to soil constituents. To test the degradation of biomass of hyperaccumulators, A. murale was grown on both high- and low-Ni soils to achieve high- (12.0 g Ni/kg) and low- (0.445 g Ni/kg) Ni biomass. Shredded leaf and stem biomass were added to a serpentine soil from Oregon that was originally used to grow high-Ni biomass and a low-Ni control soil from Maryland. Biomass Ni was readily soluble and extractable, suggesting near immediate release as biomass was added to soil Extractable nickel in soil amended with biomass declined rapidly over time due to Ni binding in soil These results suggest that Ni released from biomass of Ni hyperaccumulators may significantly affect their immediate niche only for short periods of time soon after leaf fall, but repeated application may create high Ni levels under and around hyperaccumulators.

Biodegradation, Environmental↗

PubMed2005

Latitudinal characteristics of below- and above-ground biomass of Typha: a modelling approach.

BACKGROUND AND AIMS: The latitudinal differences in the growth characteristics of Typha are largely unknown, although a number of studies have pointed out the effects of climate on the growth and productivity of Typha. Therefore, a dynamic growth model was developed for Typha to examine the effects of latitudinal changes in temperature and radiation on partitioning of the total biomass during the growing season into rhizomes, roots, flowering and vegetative shoots, and inflorescences. METHODS: After validating the model with data from growth studies of Typha found in past literature, it was used to investigate the dynamics of above- and below-ground biomasses at three latitudes: 30 degrees, 40 degrees and 50 degrees. KEY RESULTS: Regardless of the initial rhizome biomass, both above- and below-ground biomass values converged to a latitude-specific equilibrium produced by the balance between the total production and respiration and mortality losses. Above-ground biomass was high from 10 degrees to 35 degrees latitude with sufficient radiation, despite high metabolic losses; however, it decreased markedly at higher latitudes due to a low photosynthetic rate. Below-ground biomass, on the other hand, increased with latitude up to 40 degrees due to decreasing metabolic losses, and then markedly decreased at higher latitudes. Above-ground biomass was enhanced with an increasing number of cohorts regardless of latitude. However, although more cohorts resulted in a larger below-ground biomass at low latitudes, the largest below-ground biomass was provided by a smaller number of cohorts at high latitudes. This difference is due to low production rates of late-season cohorts in high latitudes, compared with consumption for shooting and establishing foliage. CONCLUSIONS: The model could be used to predict the potential growth of Typha in given conditions over a wide range of latitudes and is useful for practical applications such as wetland management or wastewater treatment systems using Typha.

Biomass↗

PubMed2003

Volatile communication between barley plants affects biomass allocation.

Patterns of biomass allocation between different plant organs have often been used to explain the response of plants to variations in resource availability. This paper reports how aerial allelopathy (plant-plant communication) affects biomass allocation, that is the trade-off between root, stem and leaves, and also relative growth rate (RGR, increase in biomass per unit biomass per unit of time, mg g-1 d-1) and its components. Based on previous experiments, communication between two barley (Hordeum vulgare L.) cultivars (Alva and Kara) was used for the present study. Kara exposed to volatiles from Alva allocated significantly more biomass to roots compared with Kara exposed to volatiles from Kara or to clean air. There was no significant difference between plants of Kara exposed to volatiles from Kara and those exposed to clean air. Changes in total dry weight (TDW), RGR and unit leaf rate (ULR, increase in biomass per unit time and leaf area, kg m-2 d-1) were not significantly affected by plant-plant communication. However, there was a significant increase in specific leaf area (SLA, leaf area per leaf dry weight, m2 kg-1) in Kara when exposed to volatiles from Alva. The results show that aerial plant-plant communication does not affect total biomass production but does significantly affect biomass allocation in individual plants. There may be differences in the volatile profiles of Kara and Alva that induce increased biomass allocation to roots in the Kara plants exposed to volatiles from Alva.

Biomass↗

PubMed2005

Estimating foliage biomass in Scots pine (Pinus sylvestris) and Norway spruce (Picea abies) plots.

Dynamic decomposition models are needed to estimate changes in the carbon stock of boreal soil because these changes are difficult to measure directly. An important aboveground carbon flux to the soil is foliage litterfall. To estimate this flux, both the amount and the turnover rate of the foliage biomass component must be known. Several methods for estimating foliage biomass of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.), including biomass equations and biomass expansion factors (BEFs), were compared with predicted foliage biomass based on forest inventory plot-level measurements. Measured foliage biomass was up-scaled from the branch-level to the plot-level by combining forest inventory variables (diameter, height, height at the crown base and crown base diameter) based on the assumptions of pipe model theory. Combining the foliage biomass: cross-sectional area ratio with the forest inventory variables provided accurate estimates of foliage biomass at the plot-level for plots in southern Finland. The results emphasize the need to test biomass equations with independent data, especially when the equations applied are based on neighboring regions.

Biomass↗

PubMed2005

Determinants of biomass production in hybrid willows and prediction of field performance from pot studies.

Pot experiments are often performed to assess plant physiological traits and relationships among growth traits under controlled environments. However, the reliability of pot studies for predicting the growth and performance of trees in the field has rarely been rigorously assessed. We evaluated the suitability of pot experiments for predicting field performance, measured as shoot biomass production, by investigating determinants of growth in hybrid willows (Salix spp.) grown under various environmental conditions in the field, and by comparing the data with the results from a corresponding pot study. Biomass production in six hybrid willow clones, bred for use as bio-fuels, was assessed in three field trials located in central and southeastern Sweden throughout the first 3-year cutting cycle. The determinants of biomass productivity, measured as biomass allocation and nitrogen (N) economy, were identified in one of the field trials. Key traits for shoot biomass production in the field were total leaf area and total amount of N; plant N losses by shed leaves were only partly controlled by leaf-litter N concentration. These key traits were also obtained from the pot study and related to shoot biomass production and abscission-leaf N loss in the field. Total leaf area and total N pool of plants grown in pot experiments were good predictors of long-term biomass production in the field, whereas shoot biomass production, specific leaf area and tissue N concentration of pot-grown plants were less suitable as predictors of field performance. Relationships between the key traits and shoot biomass production were clone-specific, indicating the need for analysis of growth traits at the clone level if field performance of trees is to be evaluated based on data from pot studies. Nutrient loss components are important for tree performance in the long term and evaluations of nutrient loss characteristics at the individual-tree level should focus on nutrient pools lost rather than on nutrient concentrations in abscised plant parts.

Biomass↗

PubMedDate not supplied

Degradation of oleic acid in anaerobic filters: the effect of inoculum acclimatization and biomass recirculation.

The degradation of oleic acid in anaerobic filters was studied and the effect of an acclimated inoculum and biomass recirculation was evaluated. Three anaerobic filters (R1, R2, and R3) were operated in parallel. The anaerobic filters R1 and R2 were inoculated with nonacclimated biomass, whereas the anaerobic filter R3 was inoculated with acclimated biomass. In the anaerobic filters R2 and R3, biomass settling and recirculation were applied. The use of an acclimated inoculum and biomass recirculation (R3) was beneficial in terms of removal efficiency, which was 4 to 8% higher than in the anaerobic filters R1 and R2 when oleate was the sole carbon source fed to the reactors at an applied organic load of 12.5 kg of chemical oxygen demand (COD)/m3 x d, even with an oleate to calcium and magnesium ion molar concentration ratio of 6.8. Biomass recirculation significantly reduced the biomass washout and the toxic effect on the acetogenic and methanogenic populations. The use of an acclimated inoculum was beneficial in terms of methane yield, which was 50% greater than that observed for the reactors inoculated with nonacclimated inoculum for the highest applied organic loading rate (12.5 kg COD/m3 x d). At the end of the operation, the biomass was encapsulated by a whitish matter, which was well detected by microscopic examination. When this sludge was incubated in batch vials at 37 degrees C where no substrate was added, methane production from the adsorbed organic matter was evidenced, attaining a maximum value (at standard temperature and pressure) of 39.7 mL/g volatile solids x d for the biomass taken from R1. With stirring (150 r/min), the methane production rate was 13.8 times higher than under static conditions. When oleate was added to this sludge, methane production was delayed, suggesting that adsorbed matter can be an intermediate of oleate degradation such as stearic, palmitic, myristic, or other saturated acids.

Anaerobiosis↗

PubMed2004

[Bryophyte biomass in dark coniferous forest of Changbai Mountain].

In this paper, the floor and epiphytic bryophyte biomass was sampled from the dark coniferous forest on the north slope of Changbai Mountain, with an altitude from 1100 m to 1700 m. The floor bryophyte biomass was measured by the method of transect sampling, and epiphytic bryophyte biomass was measured by McCune method. The results showed that bryophytes distributed unevenly, and their biomass changed greatly with increasing altitude. The biomass was the least (543 kg x hm(-2)) at 1100 m, but the greatest (5097 kg x hm(-2)) at 1250 m. The changes of bryophytes biomass could indicate different environmental situations. The biomass change of Hylocomium splendens and Rhytidiadelphus triquetrus with ascending altitude had some relativity with the community character of forest ecosystem. The biomass of Hylocomium splendens increased, but that of Rhytidiadelphus triquetrus decreased with altitude ascending from 1100 m to 1700 m. Moreover, the biomass changes could also show the needed physiological conditions of different bryophytes.

Altitude↗

PubMed1998

Influence of biomass production and detachment forces on biofilm structures in a biofilm airlift suspension reactor

The influence of process conditions (substrate loading rate and detachment force) on the structure of biofilms grown on basalt particles in a Biofilm Airlift Suspension (BAS) reactor was studied. The structure of the biofilms (density, surface shape, and thickness) and microbial characteristics (biomass yield) were investigated at substrate loading rates of 5, 10, 15, and 20 kg COD/m3. day with basalt concentrations of 60 g/L, 150 g/L, and 250 g/L. The basalt concentration determines the number of biofilm particles in steady state, which is the main determining factor for the biofilm detachment in these systems. In total, 12 experimental runs were performed. A high biofilm density (up to 67 g/L) and a high biomass concentration was observed at high detachment forces. The higher biomass content is associated with a lower biomass substrate loading rate and therefore with a lower biomass yield (from 0.4 down to 0.12 gbiomass/gacetate). Contrary to general beliefs, the observed biomass detachment decreased with increasing detachment force. In addition, smoother (fewer protuberances), denser and thinner compact biofilms were obtained when the biomass surface production rate decreased and/or the detachment force increased. These observations confirmed a hypothesis, postulated earlier by Van Loosdrecht et al. (1995b), that the balance between biofilm substrate surface loading (proportional to biomass surface production rate, when biomass yield is constant) and detachment force determines the biofilm structure. When detachment forces are relatively high only a patchy biofilm will develop, whereas at low detachment forces, the biofilm becomes highly heterogeneous with many pores and protuberances. With the right balance, smooth, dense and stable biofilms can be obtained. Copyright 1998 John Wiley & Sons, Inc.

Journal Article↗

PubMed1999

Above- and belowground biomass and primary productivity of a Larix gmelinii stand near Tura, central Siberia.

We assessed above- and belowground biomass and net primary production (NPP) of a mature Larix gmelinii (Rupr.) Rupr. forest (240-280 years old) established on permafrost soils in central Siberia. Specifically, we investigated annual carbon budgets in roots in relation to root system development and availability of soil resources. Total stand biomass estimated by allometry was about 39 Mg per ha. Root biomass (17 Mg per ha) comprised about 43% of total biomass. Coarse root (>/= 5 mm in diameter) biomass was about twice that of fine roots (< 5 mm). The aboveground biomass/root biomass ratio (T/R) of the larch stand was about unity, which is much less than that of other boreal and subalpine conifer forests. The proportion of fine roots in total root biomass (35%) was relatively high compared with other cold-climate evergreen conifer forests. Total NPP, defined as the sum of annual biomass increment of woody parts and needle biomass, was estimated to be 1.8 Mg per ha per year. Allocation of total NPP to needle production was 56%. The proportion of total NPP in belowground production (27%) was less than for evergreen taiga forests. However, belowground NPP was probably under-estimated because root mortality was excluded. We conclude that L. gmelinii trees invested annual carbon gains largely into needle production or roots, or both, at the expense of growth of aboveground woody parts. This carbon allocation pattern, which resulted in the construction of exploitative root networks, appeared to be a positive growth response to the nutrient-poor permafrost soil of central Siberia.

Journal Article↗

PubMed1995

Studies on the biosorption of uranium by Talaromyces emersonii CBS 814.70 biomass.

Residual biomass, produced by the thermophilic fungus, Talaromyces emersonii CBS 814.70, following growth on glucose-containing media, was examined for its ability to take up uranium from aqueous solution. It was found that the biomass had a relatively high observed biosorption capacity for the uranium (280 mg/g dry weight biomass). The calculated maximum biosorption capacity obtained by fitting the data to a Langmuir model was calculated to be 323 mg uranium/g dry weight biomass. Pretreatment of the biomass with either dilute HCl or NaOH brought about a significant decrease in biosorptive capacity for uranium. Studies on the effects of variation in temperature on the biosorptive capacity demonstrated no significant change in binding between 20 degrees C and 60 degrees C. However, a significant decrease in biosorptive capacity was observed at 5 degrees C. Binding of uranium to the biomass at all temperatures reached equilibrium within 2 min. While the routine binding assays were performed at pH 5.0, adjustment of the pH to 3.0 gave rise to a significant decrease in biosorption capacity by the biomass. The biosorptive capacity of the biomass for uranium was increased when extraction from solution in sea-water was examined.

Adsorption↗