SEARCH · PubMed Health

Results for “FIBROIN”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

PubMed1981

Faithful transcription initiation of fibroin gene in a homologous cell-free system reveals an enhancing effect of 5' flanking sequence far upstream.

For the faithful initiation of transcription of exogenously added fibroin gene, a crude cellular extract was prepared from the posterior silk glands where fibroin gene is specifically transcribed. The faithful initiation was demonstrated by the assay with use of truncated fibroin gene templates and confirmed by nuclease S1 mapping. The transcription initiation of fibroin gene was detected also in the extract from the middle silk glands where fibroin gene is not transcribed, indicating that an expected suppression machinery for the gene was left behind during the extraction procedures. The promoter sequence of fibroin gene required in these homologous extracts (the nucleotide position -29 to +6) is the same as that in a heterologous HeLa cell extract. This result guarantees a limited usefulness of the HeLa cell extract in determining promotor sequence or analyzing general transcription machinery. In the homologous extracts, but not in the heterologous extract, however, it has been shown for the first time in vitro that the 5' flanking sequence upstream from -74 enhances the transcription initiation of fibroin gene. In addition, a remarkable fibroin gene preference in transcription over mouse beta globin and adenovirus 2 major late genes was observed in the homologous extracts. The fibroin gene preference is partly caused by the sequence element upstream from -74 of fibroin DNA.

Animals↗

PubMed2004

Sulfation of silk fibroin by chlorosulfonic acid and the anticoagulant activity.

Silk fibroin (Bombyx mori) was sulfated using chlorosulfonic acid in pyridine. FT-IR spectra showed introduction of sulfate group by this reaction; NMR spectra indicated that sulfation occurred mainly at tyrosine and serine residues. Molecular size decreased and dispersed with sulfation. The molecular weight was estimated in around 20,000 by GPC using protein standards. Amino acid composition suggested that sulfated fibroin came from H-chain of fibroin; the crystal region of fibroin molecule remained in sulfated fibroin. The amount of sulfate groups increased with overall reaction time. The maximum amount was estimated in 1.0 mmol/g by acidimetric titration. Sulfation efficiency was calculated as 66.7%. Blood coagulation was prevented by 0.5 mg of sulfated fibroin in 1 ml of blood, while original fibroin did not show any effect. Anticoagulant activity of sulfated fibroin strongly depends on the amount of sulfate groups introduced. These results indicate that sulfate group introduction results in addition of anticoagulant function to silk fibroin. Sulfated fibroin is a new type of anticoagulant material having a protein backbone.

Amino Acids↗

PubMedDate not supplied

New process to form a silk fibroin porous 3-D structure.

A new process to form fibroin spongy porous 3-D structure is reported herein. The process involves freezing and thawing fibroin aqueous solution in the presence of a small amount of an organic solvent. The process requires no freeze-drying, chemical cross-linking, or the aid of other polymeric materials. The solvent concentration, fibroin concentration, freezing temperature, and freezing duration affect the sponge formation, its porous structure, and its mechanical properties. Measurements by XRD and FTIR indicate that silk I and silk II crystalline structures exist in the fibroin sponge and that the secondary structure of fibroin is transformed to a beta-sheet from a random coil during this process. The tensile strength decreased slightly, but the fibroin sponge showed no deformation after autoclaving. Therefore, the fibroin sponge was sterilized using an autoclave. For 3 weeks, MC3T3 cells proliferated in the sterilized fibroin sponge. The fibroin sponge formed by this new process is applicable as a tissue-engineering scaffold because it is formed from biocompatible pure silk fibroin and offers both porous structure and mechanical properties that are suitable for cell growth and handling.

Animals↗

PubMed2005

Insulin sensitization of MAP kinase signaling by fibroin in insulin-resistant Hirc-B cells.

Fibroin has been shown to enhance insulin-stimulated glucose uptake in 3T3-L1 adipocytes, and the mechanism underlying the fibroin effect focused on phosphatidylinositol 3-kinase (PI 3-K) pathway has been reported. In the present study, for defining the insulin-sensitizing effects of fibroin synthetically, we have used the Hirc-B cells which are rat fibroblasts over-expressing wild-type human insulin receptors to investigate the insulin-stimulation of mitogen-activated protein (MAP) kinase signaling cascades. Cultivation of Hirc-B cells in high-glucose medium for 6 days led to an insulin-resistant state in which insulin-stimulated DNA synthesis was blocked completely. Chronic exposure to fibroin for 16 h markedly recovered DNA synthesis in insulin-resistant cells. Development of insulin resistance caused a reduction of c-Jun N-terminal kinase (JNK) phosphorylation, which was also recovered by fibroin exposure. Fibroin sensitized the insulin-stimulated c-Jun accumulation and phosphorylation in insulin-resistant cells. In the time course for c-Jun accumulation, fibroin had a vanadate-like effect. Further, fibroin was shown to delay the degradation of c-Jun. It is suggested that fibroin may sensitize insulin action by blocking JNK dephosphorylation caused by MAP kinase phosphatase-1 (MKP-1).

Animals↗

PubMed2005

Design, expression and solid-state NMR characterization of silk-like materials constructed from sequences of spider silk, Samia cynthia ricini and Bombyx mori silk fibroins.

Silk has a long history of use in medicine as sutures. To address the requirements of a mechanically robust and biocompatible material, basic research to clarify the role of repeated sequences in silk fibroin in its structures and properties seems important as well as the development of a processing technique suitable for the preparation of fibers with excellent mechanical properties. In this study, three silk-like protein analogs were constructed from two regions selected from among the crystalline region of Bombyx mori silk fibroin, (GAGSGA)(2), the crystalline region of Samia cynthia ricini silk fibroin, (Ala)(12), the crystalline region of spider dragline silk fibroin, (Ala)(6), and the Gly-rich region of spider silk fibroin, (GGA)(4). The silk-like protein analog constructed from the crystalline regions of the spider dragline silk and B. mori silk fibroins, (A(6)SCS)(8), that constructed from the crystalline regions of the S. c.ricini and B. mori silk fibroins, (A(12)SGS)(4), that constructed from and the crystalline region of S. c.ricini silk fibroin and the glycine-rich region of spider dragline silk fibroin, (A(12)SGS)(4),were expressed their molecular weights being about 36.0 kDa, 17.0 kDa and 17.5 kDa, respectively in E. coli by means of genetic engineering technologies. (A(12)SCS)(4) and (A(12)SGS)(4 )undergo a structural transition from alpha-helix to beta-sheet on a change in the solvent treatment from trifluoroacetic acid (TFA) to formic acid (FA). However, (A(6)SCS)(8) takes on the beta-sheet structure predominantly on TFA treatment and FA treatment. Structural analysis was performed on model peptides selected from spider dragline and S. c.ricini silks by means of (13)C CP/MAS NMR.

Animals↗

PubMed1999

In vitro evaluation of the inflammatory potential of the silk fibroin.

Silk fibroin membranes recently have been suggested as matrices for biomedical applications, such as guided tissue regeneration and burn wound dressings. The aim of this study was to evaluate the inflammatory potential of fibroin films and to compare the fibroin films with two model materials with completely different physico-chemical properties: poly(styrene) and poly(2-hydroxyethyl methacrylate). Fibroin bound lower levels of fibrinogen than did the two synthetic polymers while the same amounts of adsorbed human plasma complement fragment C3 and IgG were detected. Studies of the binding strength of C3 to fibroin, evaluated by a novel experimental procedure, indicated the occurrence of strong hydrophobic interactions at the interface. The activation of the mononuclear cells by fibroin, measured as interleukin 1beta production, was lower than the reference materials. Adhesion experiments showed the ability of the macrophages to adhere to fibroin by filopodia without a complete spreading of the cells. The results achieved in this study demonstrate that the interactions of fibroin with the humoral components of the inflammatory system were comparable with those of the two model surfaces while the degree of activation and adhesion of the immunocompetent cells appeared more limited.

Adsorption↗

PubMed2006

Biocompatibility evaluation of silk fibroin with peripheral nerve tissues and cells in vitro.

Silk-based materials have been used in the field of bone or ligament tissue engineering. In order to explore the feasibility of using purified silk fibroin to construct artificial nerve grafts, it is necessary to evaluate the biocompatibility of silk fibroin material with peripheral nerve tissues and cells. We cultured rat dorsal root ganglia (DRG) on the substrate made up of silk fibroin fibers and observed the cell outgrowth from DRG during culture by using light and electron microscopy coupled with immunocytochemistry. On the other hand, we cultured Schwann cells from rat sciatic nerves in the silk fibroin extract fluid and examined the changes of Schwann cells after different times of culture. The results of light microscopy, MTT test and cell cycle analysis showed that Schwann cells cultured in the silk fibroin extract fluid showed no significant difference in their morphology, cell viability and proliferation as compared to that in plain L15 medium. Furthermore, no significant difference was found in expression of the factors secreted by Schwann cells, such as nerve growth factor (NGF), brain-derived neurotrophic factor (BDNF) and S-100, between Schwann cells cultured in the silk fibroin extraction fluid and in plain L15 medium by the aid of immunocytochemistry, RT-PCR and Western analysis. Collectively, these data indicate that silk fibroin has good biocompatibility with DRG and is also beneficial to the survival of Schwann cells without exerting any significant cytotoxic effects on their phenotype or functions, thus providing an experimental foundation for the development of silk fibroin as a candidate material for nerve tissue engineering applications.

Animals↗

PubMedDate not supplied

Structural studies of Bombyx mori silk fibroin during regeneration from solutions and wet fiber spinning.

Regenerated silk fibroin materials show properties dependent on the methods used to process them. The molecular structures of B. mori silk fibroin both in solution and in solid states were studied and compared using X-ray diffraction, FTIR, and (13)C NMR spectroscopy. Some portion of fibroin protein molecules dissolved in formic acid already have a beta-sheet structure, whereas those dissolved in TFA have some helical conformation. Moreover, fibroin molecules were spontaneously assembled into an ordered structure as the acidic solvents were removed from the fibroin-acidic solvent systems. This may be responsible for the improved physical properties of regenerated fibroin materials from acidic solvents. Regenerated fibroin materials have shown poor mechanical properties and brittleness compared to their original form. These problems were technically solved by improving the fiber forming process according to a method reported here. The regenerated fibroin fibers showed much better mechanical properties compared to the native silk fiber and their physical and chemical properties were characterized by X-ray diffraction, solid state (13)C NMR spectroscopy, SinTech tensile testing, and SEM.

Animals↗

PubMed1984

Reduced level of secretion and absence of subunit combination for the fibroin synthesized by a mutant silkworm, Nd(2).

Fibroin is normally composed of one H chain (350 kd) and one L chain (25 kd) which are connected by disulfide bond(s). However, the small amount of fibroin secreted into the lumen of the posterior silk gland of the Nd(2) (naked pupa) mutant does not contain L chain, although L chain mRNA is present and L chain is synthesized in the posterior silk gland cells of the mutant. In a hybrid silkworm, Nd(2)/Tamanashikasuri, where Tamanashikasuri is a normal producer of fibroin, L chain from the two alleles are distinguishable electrophoretically. It is demonstrated using this system that the L chain from the Nd(2) allele can combine normally with the H chain from Tamanashikasuri and the H-L complex is secreted normally. In another hybrid system, Nd(2)/J-131, where J-131 is a normal producer of fibroin, fibroin derived from the two alleles are distinguishable due to the different electrophoretic mobility of H chain. The fibroin derived from the J-131 allele is composed of H chain and L chain, while the fibroin derived from the Nd(2) allele is devoid of L chain, and its secretion is greatly reduced. We present evidence suggesting that the H chain derived from the Nd(2) allele is structurally abnormal and discuss how the H-L subunit structure is advantageous in the secretion of fibroin.

Alleles↗

PubMed2004

Fibroin silk proteins from the nonmulberry silkworm Philosamia ricini are biochemically and immunochemically distinct from those of the mulberry silkworm Bombyx mori.

Silk proteins were isolated from the cocoons of the nonmulberry silkworm, Philosamia ricini. Three polypeptides of 97, 66, and 45 kDa were identified. The 66-kDa molecule represented sericin, whereas the 97-kDa and the 45-kDa polypeptides linked together through a disulfide bond constituted the fibroin protein. Antibodies raised against the 97-kDa P. ricini fibroin heavy chain reacted specifically with this molecule and did not recognize fibroin heavy chain from another nonmulberry silkworm, Antheraea assama or from the mulberry silkworm, Bombyx mori, suggesting the presence of P. ricini species-specific determinants in this heavy chain. Antibodies generated against fibroin light chain of P. ricini also showed similar reactivity pattern. Immunoblot analysis with proteins isolated from the silk glands of P. ricini at different stages of larval development showed that the expression of fibroin heavy chain was developmentally and spatially regulated. The protein was most abundant in the 5th instar larva, and could be detected in the middle and the posterior but not the anterior silk glands. The amino acid composition of the 97-kDa fibroin protein showed abundance of glutamic acid and did not contain (Gly-Ala)(n) motifs, a characteristic feature of B. mori fibroin heavy chain. Our study reveals significant differences between the nonmulberry silkworm P. ricini and the mulberry silkworm B. mori in the biochemical composition and immunochemical characteristics of fibroin heavy chain. These differences might be responsible for the differences seen in the quality of silk produced by these two silkworms.

Amino Acids↗

PubMed1975

Translation of silk fibroin messenger RNA in an Ehrlich ascites cell-free extract.

RNA identified by its base composition and T1 RNase oligonucleotide pattern as the message for silk fibroin was purified from mature posterior silk glands of Bombyx mori larvae and used to direct polypeptide synthesis in an Ehrlich ascites cell-free extract. Fibroin mRNA stimulated [3-H]alanine incorporation about 3- to 4-fold in the presence of 80 mM K+ and 4 mM Mg-2+. The stimulation was reduced in the presence of 5 times 10-minus 6 to 10-minus 4 M aurintricarboxylic acid, an inhibitor of the initiation of protein synthesis. The cell-free products were heterogeneous in size, including peptides as large as 100,000 daltons. They co-precipitated with carrier fibroin sequences after digestion with trypsin. A large fraction of the polypeptides synthesized in response to fibroin mRNA was precipitated by antiserum directed against amino acid sequences in noncrystalline region polypeptides of fibroin. Furthermore, after digestion with chymotrypsin, a major fraction of the cell-free products specifically co-precipitated with crystalline region sequences of native fibroin. The size and amino acid composition of the fibroin crystalline region polypeptides isolated from the cell-free products were similar to those from native fibroin.

Amino Acids↗

PubMed2003

Culture of chondrocytes in fibroin-hydrogel sponge.

Fibroin-hydrogel sponge and collagen gel were used as scaffold for in vitro cartilage regeneration. Fibroin-hydrogel sponge was formed by phase separation from freezed fibroin solution. Chondrocytes were harvested from proximal humerus, distal femur and proximal tibia of 4-week-old Japanese white rabbits and inoculated in the fibroin-hydrogel sponge and collagen gel. Those constructs were cultured in DMEM supplemented with 10% FCS and 50 ml L-ascorbate at 37 degrees C. Histological observation, measurement of sulfated glycosaminoglycan and cell density were carried out at 3, 7, and 14 days after the cultivation. Well-defined cartilage tissue can be seen both in the fibroin-hydrogel sponge and in the collagen gel. The matrix was intensely stained by safranin-O and showed a metachromatic reaction in both group. However, the quantity of sulfated glycosaminoglycan and cell density of the fibroin-hydrogel sponge group were increased more rapidly than these of the collagen gel group. Thus, the chondrocytes proliferated in the fibroin sponge without losing their differentiated phenotype. It is possible that culture environment in the fibroin sponge was suitable for chondrocytes regeneration.

Biomimetic Materials↗

PubMed2004

[The preparation and properties of Modified silk fibroin membranes by chitosan].

The Modified silk fibroin membranes were prepared by mixing the aqueous solutions of both silk fibroin and chitosan with the use of oxidized glucose aldehyde as a crosslinking agent. It was characterized by FTIR, DSC, measurements of membrane-potential and mechanical properties, the water swelling ratios and permeability coefficient for model drug 5-Fu in the different pH buffer solutions. It was shown that there were some strong hydrogen bond interaction and good compatibility between silk fibroin and chitosan molecules in the modified silk fibroin films. The isoelectric point of modified fibroin film was about pH 5.35, but that of natural fibroin film was around pH 4.5. It was also found that the mechanical properties of modified fibroin films were much better than those of fibroin itself. Its tensile strength and breaking elongation were greatly enhanced with the increase of chitosan content and their maximum values were as high as 71.4-72.7 MPa and 2.96%-3.82% respectively, at the composition of 40 wt%-60 wt% chitosan. Its coefficient of permeability decreased firstly and then increased slowly with the change of the pH value of solutions from pH 5 to pH 9, and the minimum coefficient of permeability was observed when pH=7.

Biocompatible Materials↗

PubMed2004

Molecular and mechanical characterization of aciniform silk: uniformity of iterated sequence modules in a novel member of the spider silk fibroin gene family.

Araneoid spiders use specialized abdominal glands to produce up to seven different protein-based silks/glues that have diverse physical properties. The fibroin sequences that encode aciniform fibers (wrapping silk) and the mechanical properties of these fibers have not been characterized previously. To gain a better understanding of the molecular radiation of spider silk fibroin genes, cDNA libraries derived from aciniform glands of the banded garden spider, Argiope trifasciata, were constructed, and unique silk transcripts were sequenced. There was evidence for a single silk fibroin gene that was expressed in the aciniform glands, and the inferred amino acid composition of the novel fibroin closely matched the amino acid contents of these glands. The inferred protein, aciniform spidroin 1 (AcSp1), is composed of highly homogenized repeats that are 200 amino acids in length. The long stretches of poly-alanine and glycine-alanine subrepeats, which are thought to account for the crystalline regions of minor ampullate and major ampullate fibers, are very poorly represented in AcSp1. The AcSp1 repeat unit is iterated minimally 14 times and does not display substantial sequence similarity to any previously described genes or proteins. Database searches, however, showed that the nonrepetitive carboxy-terminus contains stretches of matches to known spider fibroin sequences, suggesting that the AcSp1 gene is a highly divergent member of the spider silk gene family. In phylogenetic analyses of carboxy-terminal sequences from araneid spiders, the aciniform sequence did not group strongly with clusters of fibroins from the flagelliform, minor ampullate, or major ampullate silk glands. Comparisons of stress/strain curves for major ampullate, minor ampullate, and aciniform silks from Argiope trifasciata showed significant differences in ultimate strength, extensibility, and toughness. Remarkably, the toughness of aciniform silk was 50% greater than the highest values typically recorded for major ampullate silk. These differences in performance, in combination with the radical divergence at the sequence level among fibroin paralogs, suggest a possible linkage between silk fibroin sequences and performance that should be explored in future structural/functional studies of aciniform silk.

Amino Acid Sequence↗

PubMedDate not supplied

Swelling and dissolution of silk fibroin (Bombyx mori) in N-methyl morpholine N-oxide.

Bombyx mori silk fibers were dissolved in N-methyl morpholine N-oxide (MMNO), an organic cyclic amine oxide used for the solvent spinning of regenerated cellulosic fibers. The commercial MMNO monohydrate used in this study as a solvent for silk is a hygroscopic compound crystalline at room temperature, which becomes an active solvent after melting at 76 degrees C. The degree of hydration of MMNO was checked by DSC measurements. The solvation power of MMNO towards silk fibroin drastically decreased at a water content > or = 20-21% w/w. Dissolution of silk required both thermal and mechanical energy. The optimum temperature was 100 degrees C. At lower temperatures dissolution proceeded very slowly. At higher temperatures, rapid depolymerization of silk fibroin occurred. The value of the Flory-Huggins interaction parameter chi for the MMNO-H2O-silk fibroin system was -8.5, suggesting that dissolution is a thermodynamically favored process. The extent of degradation of silk fibroin was assessed by measuring the intrinsic viscosity and determining the amino acid composition of silk after regeneration with an aqueous methanol solution, which was effective in removing the solvent and coagulating silk. Regenerated silk fibroin membranes were characterized by infrared spectroscopy, differential scanning calorimetry and scanning electron microscopy. The prevailing molecular conformation of silk fibroin chains was the beta-sheet structure, as shown by the intense amide I-III bands at 1704, 1627, 1515, 1260, and 1230 cm(-1). The value of the I1260/I1230 intensity ratio (crystallinity index) was 0.68, comparable to that of the fibers. The DSC thermogram was characteristic of a silk fibroin material with unoriented beta-sheet crystalline structure, with an intense decomposition endotherm at 294 degrees C. The SEM examination of fractured surfaces showed the presence of a dense microstructure with a very fine texture formed by densely packed roundish particles of about 100-200 nm diameter.

Amino Acids↗

PubMed1979

The adaptation of the silkgland cell to the production of fibroin in Bombyx mori L.

At the end of the larval life, the posterior silk gland of Bombyx mori is highly specialized in the biosynthesis of a specific protein : silk fibroin. The successive steps of fibroin production : amino supply, synthesis and secretion are described. Their analysis shows that fibroin synthesis is important enough to orient the overall cellular activities. Thus, the terminal differentiation of the posterior silk gland cell corresponds to the cells adaptation to the production of fibroin. Cytological and biochemical studies of the silk gland development show that specialization occurs discontinuously; the fourth molt, when fibroin is no more produced, is a phase of regression of the cellular adaptation whereas cell differentiation proceeds during the growth phase of the following fifth intermolt. After the spinning of the cocoon, the cells are lysed and disappear entirely at the nymphal stage. Biometrical analysis of silk production of different Bombyx strains in relation with the development of the proteosynthesis apparatus leads to the conclusion that the specific messenger RNA content determines the amount of synthetized fibroin. At maximum secretion, the mRNAF recruits almost all the cell ribosomes. The variations of the size of the proteosynthesis machinery are sufficient to explain the differences of productivity of the various silkworm strains. Different experimental factors affect silk production. Topical applications of juvenile hormone induce an increase of the RNA content and a consequent rise of the amount of secreted protein. In contrast, starvation reduces the silk production by acting at both transcriptonal and translational levels. Current researches on this system are devoted to the study of the differential gene expression, with particular interest to the regulation of the transcription of the specific fibroin messenger RNA.

Amino Acids↗

PubMed1981

Effect of tRNA pool balance on rate and uniformity of elongation during translation of fibroin mRNA in a reticulocyte cell-free system.

Unsuccessful attempts to synthesize complete fibroin chains in vitro were previously made in heterologous cell-free system [3]. In the present work, we succeeded to obtain complete translation of purified fibroin mRNA in a rabbit reticulocyte lysate. Whilst this work was being completed [1], similar results were published by Lizardi et al. [4]. The synthesis of full-sized molecules of fibroin (M.W. 360,000) was achieved by adding tRNA from the posterior silk gland to the cell-free system. With tRNA from other sources, both the translation rate and the amount of complete fibroin chains dropped. This effect of tRNA is situated at the elongation levels. Analysis of cell-free synthesized products by polyacrylamide gel electrophoresis shows that smaller discrete polypeptides are accumulated after 120 minutes of incubation. These polypeptides correspond to growing fibroin chains. This pattern of translation products suggests that elongation might decelerate at specific sites of the fibroin mRNA. These results show that a tRNA pool adjusted to mRNA codon frequency is required to obtain the maximal average elongation rate. A stochastic model based on random acceptance of tRNA at the ribosomal A site for the codon-anticodon recognition process can explain this phenomenon. It can also explain the occurrence of the unfinished discrete fibroin polypeptides during in vitro translation.

Animals↗

PubMedDate not supplied

Possible implications of serine and tyrosine residues and intermolecular interactions on the appearance of silk I structure of Bombyx mori silk fibroin-derived synthetic peptides: high-resolution 13C cross-polarization/magic-angle spinning NMR study.

Bombyx mori silk fibroin molecule is known to exist in two distinct structural forms: silk I (unprocessed silk fibroin) and silk II (processed silk fibroin). Using synthetic peptides, we attempt to explore the structural role played by Ser and Tyr residues on the appearance of silk I structural form of the fibroin. Twelve selected peptides (1-12) incorporating Ser and Tyr residues in the (Ala-Gly)(n) copolypeptide, that is, the sequences mimicking the primary structure of B. mori silk fibroin molecule, have been investigated under the silk I state, employing high-resolution (13)C cross-polarization/magic-angle spinning (CP/MAS) NMR spectroscopy. To acquire the silk I structural form, all the peptides were dissolved in 9 M LiBr and then dialyzed extensively against water, as established previously for the synthetic (Ala-Gly)(15) copolypeptide and B. mori silk fibroin. The diagnostic line shape of the Ala C(beta) peaks and the conformation-dependent (13)C chemical shifts of Ala and Gly resonances are presented to analyze and characterize the structural features. The results indicate that the incorporation of one Ser and/or one Tyr residue(s) at selected position in the basic (Ala-Gly)(15) sequence tend to retain predominantly the silk I structure. Conversely, the repeat pentameric and octameric Ala-Gly-Ser-Gly-Ala-Gly sequences, for example, (Ala-Gly-Ser-Gly-Ala-Gly)(5) or (Ala-Gly-Ser-Gly-Ala-Gly)(8), preferred predominantly the silk II form. The peptide sequences incorporating Ser and Tyr residue(s) into repeat Ala-Gly-Ser-Gly-Ala-Gly sequences, however, adopted the silk II structure with certain content structural heterogeneity or randomness, more pronounced for specific peptides studied. Interestingly, the crystalline Cp fraction of B. mori silk fibroin, when mixed with (Ala-Gly-Ser-Gly-Ala-Gly)(5) sequence in a 5:1 molar ratio, dissolved in 9 M LiBr, and dialyzed against distilled water, favor the silk I form. The finding tends to suggest that the less stable silk I form in (Ala-Gly-Ser-Gly-Ala-Gly)(n) sequences is likely to be induced and facilitated via intermolecular interactions with the Cp fraction, which predominantly prefers the silk I form under similar conditions; however, the hydrogen-bond formation involving O(gamma)H groups of the Ser residues may have some implications.

Amino Acid Sequence↗