PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “WASTES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

Incineration of healthcare wastes: management of atmospheric emissions through waste segregation.

The amount of atmospheric pollutants emitted through the incineration of healthcare wastes can be estimated using emission factors. Emission factors have been published without including sufficient information about the types of wastes incinerated. This paper reports the first emission factors estimated for the incineration of wastes segregated into different types according to the Portuguese legislation. One controlled-air incinerator without air pollution control devices was used in the research. The main objectives of the study were: (i) to estimate the emission factors for particulate matter, dioxins, heavy metals and gaseous pollutants, according to the type of waste incinerated; (ii) to evaluate the quality of atmospheric emissions; and (iii) to define a methodology for the management of atmospheric emissions, evaluating the influence of type of waste incinerated and of the segregation method used on the emitted amounts. It was concluded that: (i) when emission factors are not associated with the type of incinerated mixture, the utility of the emission factors is highly doubtful; (ii) without appropriate equipment to control atmospheric pollution, incineration emissions exceed legal limits, neglecting the protection of human health (the legal limit for pollutant concentrations could only be met for NO(x), all other concentrations were higher than the maximum allowed: dioxins, 93-710 times; Hg, 1.3-226 times; CO, 11-24 times; SO(2), 2-5 times; and HCl, 9-200 times); (iii) rigorous segregation methodologies must be used to minimize atmospheric emissions, and incinerate only those wastes that should be incinerated according to the law. A rigorous segregation program can result in a reduction of the amount of waste that should be incinerated by 80%. A reduction in the quantity of waste incinerated results in a reduction on the amounts of pollutants emitted: particulate matter, 98%; dioxins, 99.5%; As, Cd, Cr, Mn and Ni, respectively, 90%, 92%, 84%, 77% and 92%; Hg and Pb, practically eliminated; SO(2) and NO(x), 93%; and CO and HCl, more than 99%.

Air Pollution↗

Environmental modelling of use of treated organic waste on agricultural land: a comparison of existing models for life cycle assessment of waste systems.

Modelling of environmental impacts from the application of treated organic municipal solid waste (MSW) in agriculture differs widely between different models for environmental assessment of waste systems. In this comparative study five models were examined concerning quantification and impact assessment of environmental effects from land application of treated organic MSW: DST (Decision Support Tool, USA), IWM (Integrated Waste Management, U.K.), THE IFEU PROJECT (Germany), ORWARE (ORganic WAste REsearch, Sweden) and EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies, Denmark). DST and IWM are life cycle inventory (LCI) models, thus not performing actual impact assessment. The DST model includes only one water emission (biological oxygen demand) from compost leaching in the results and IWM considers only air emissions from avoided production of commercial fertilizers. THE IFEU PROJECT, ORWARE and EASEWASTE are life cycle assessment (LCA) models containing more detailed land application modules. A case study estimating the environmental impacts from land application of 1 ton of composted source sorted organic household waste was performed to compare the results from the different models and investigate the origin of any difference in type or magnitude of the results. The contributions from the LCI models were limited and did not depend on waste composition or local agricultural conditions. The three LCA models use the same overall approach for quantifying the impacts of the system. However, due to slightly different assumptions, quantification methods and environmental impact assessment, the obtained results varied clearly between the models. Furthermore, local conditions (e.g. soil type, farm type, climate and legal regulation) and waste composition strongly influenced the results of the environmental assessment.

Agriculture↗

[Co-composting high moisture vegetable waste and flower waste in a sequential fed operation].

Co-composting of high moisture vegetable wastes (celery and cabbage) and flower wastes (carnation) were studied in a sequential fed bed. The preliminary materials of composting were celery and carnation wastes. The sequential fed materials of composting were cabbage wastes and were fed every 4 days. Moisture content of mixture materials was between 60% and 70%. Composting was done in an aerobic static bed of composting based temperature feedback and control via aeration rate regulation. Aeration was ended when temperature of the pile was about 40 degrees C. Changes of composting of temperature, aeration rate, water content, organic matter, ash, pH, volume, NH4(+)-N, and NO3(-)-N were studied. Results show that co-composting of high moisture vegetable wastes and flower wastes, in a sequential fed aerobic static bed based temperature feedback and control via aeration rate regulation, can stabilize organic matter and removal water rapidly. The sequential fed operation are effective to overcome the difficult which traditional composting cannot applied successfully where high moisture vegetable wastes in more excess of flower wastes, such as Dianchi coastal.

Biodegradation, Environmental↗

The waste-product theory of aging: cell division rate as a function of waste volume.

The rate of cell division is calculated as a function of waste product volume in U-787CG human diploid glial cells grown in vitro. The calculation is based on two earlier mathematical models. One is a compartmental analysis in which cell division rate is obtained from data on the fraction of cells which become sterile as the passage level increases. A second model is used to calculate the amount of waste per cell from the observed rate of waste accumulation in a non-dividing population and from the division rate calculated with the use of the first model. Results from the two models are correlated to obtain the desired function relating cell division rate to waste volume. If cellular aging is taken to mean loss of the ability of cells to divide, and if, as in the waste-product theory, this loss is attributed to waste accumulation, the calculated results show that aging is evident at waste levels well below those at which non-dividing populations can survive. Thus the process of cell division may be much more sensitive to waste accumulation than other cellular processes needed for the maintenance of life.

Aging↗

Pyrolysis of virgin and waste polypropylene and its mixtures with waste polyethylene and polystyrene.

A comparison of waste and virgin polypropylene (PP) plastics under slow pyrolysis conditions is presented. Moreover, mixtures of waste PP with wastes of polyethylene (PE) and polystyrene (PS) were pyrolyzed under the same operating conditions. Not only the impact of waste on degradation products but also impacts of the variations in the mixing ratio were investigated. The thermogravimetric weight loss curves and their derivatives of virgin and waste PP showed differences due to the impurities which are dirt and food residues. The liquid yield distribution concerning the aliphatic, mono-aromatic and poly-aromatic compounds varies as the ratio of PP waste increases in the waste plastic mixtures. In addition to this, the alkene/alkane ratio of gas products shows variations depending on the mixing ratio of wastes.

Environmental Pollution↗

Use of some natural and waste materials for waste water treatment.

A fundamental study was conducted to assess removal and filtration capacity of waste and natural indigenous materials as treatment mediums e.g., shell, limestone, waste paper mixed with refuse concrete, refuse cement, also processed nitrolite, charcoal-bio and charcoal. Under room temperature condition removal of phosphoric, nitric and ammonium-ions, filtration of suspended substance (SS) together with removal of COD in waste water was investigated. Influence of particle size effect for all treatment mediums except for waste paper was pursued. Significant improvement of waste water quality with respect to SS, phosphoric ions and decrease in COD is possible by treating with these filtration mediums. With specific reference to some treatment mediums NO3-N and NH4-N showed reasonable improvement in quality, although generally removal effect was not very significant. Efficacy of treatment was dependent on the particle size of treatment mediums in general, however, nitrolite for NH4--N, charcoal-A for SS and COD, refuse cement mixed with waste paper for PO4 ion removal showed insignificant variability on the particle size effect. Results of this fundamental study demonstrate effectiveness and feasibility for applied application of these proposed waste and naturally available treatment ingredients at lower cost.

Charcoal↗

Assessment of wool waste and hair waste as soil amendment and nutrient source.

A field and two container experiments were conducted to assess uncomposted wool and hair wastes as a nutrient source for crops and to evaluate their potential to improve soil biological and chemical properties. Overall, addition of wool or hair waste to soil increased yields of basil (Ocimum basilicum L. 'Trakia'), thorn apple (Datura innoxia Mill. 'Inka'), peppermint (Mentha x piperita L. 'Black Mitchum'), and garden sage (Salvia officinalis L. 'Desislava'), increased NH(4)-N and NO(3)-N in soil, increased total N (and protein) content in plant tissue, stimulated soil microbial biomass, and decreased mycorrhizae colonization of plant roots of thorn apple but not in basil. Wool and hair waste additions to soil altered slightly the content and composition of plant secondary metabolites (essential oils or alkaloids); however, overall the constituents remained within the "typical" range for the respective crops. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis demonstrated that wool and hair wastes decompose slowly under field or greenhouse conditions, and act as a slow release S, N, P, and K fertilizer. These results, along with the measured concentrations of NO(3)-N in soil at harvest, suggest that the addition of wool or hair waste of only 3.3 g kg(-1) of soil may support two to five harvests or crops under greenhouse conditions and two to four field seasons in field production systems, and would improve soil biological and chemical characteristics. Further research is needed to optimize the rate of application of these waste materials to the nutrient requirements of specific crops to avoid nitrate leaching into the ground water. In addition, the effect of wool and hair waste on other environmental end points should also be further investigated before specific recommendations for growers are provided.

Absorptiometry, Photon↗

Waste package performance evaluations for the proposed high-level nuclear waste repository at Yucca Mountain.

The evaluation studies of the proposed repository for long-term storage of spent nuclear fuel and high-level nuclear waste at Yucca Mountain, Nevada, are underway. Fulfillment of the requirements for limiting dose to the public, which includes containment of the radioactive waste emplaced in the proposed repository and subsequent slow release of radionuclides from the Engineered Barrier System (EBS) into the geosphere, will rely on a robust waste container design, among other EBS components. Part of the evaluation process involves sensitivity studies aimed at elucidating which model parameters contribute most to the waste package and overlying drip shield degradation characteristics. The model parameters identified for this study include (1) general corrosion rate parameters and (2) stress corrosion cracking (SCC) parameters. Temperature dependence and parameter uncertainty are evaluated for the general corrosion rate model parameters while for the SCC model parameters, uncertainty treatment of stress intensity factor, crack initiation threshold, and manufacturing flaw orientations are evaluated. Based on these evaluations new uncertainty distributions are generated and recommended for future analyses. Also, early waste package failures due to improper heat treatment were added to the waste package degradation model. The results of these investigations indicate that the waste package failure profiles are governed by the manufacturing flaw orientation model parameters.

Journal Article↗

Container and waste pile standards for owners and operators of hazardous waste facilities: consolidated permit regulations--Environmental Protection Agency. Amendments to interim final rule.

The Environmental Protection Agency (EPA) is today promulgating amendments to the hazardous waste management regulations regarding the management of hazardous waste in containers and piles and associated permit regulations (40 CFR Part 264, Subparts I and L, and Part 122, Subpart B). These amendments better tailor the standards to the particular type of hazard posed by specific situations. The standards for containers are amended to waive the containment system requirements for wastes that do not contain free liquids, provided that the wastes are protected from contact with accumulated liquid. The standards for waste piles are amended to waive the containment system requirements for wastes that do not contain free liquids, provided that the pile is protected from precipitation by a structure and from surface water run-on and wind dispersal of the waste by the structure or some other means. The Agency believes these amendments believes these amendments will not reduce the level of protection of human health and the environment.

Refuse Disposal↗

Hazardous waste management system; standards applicable to generators of hazardous waste; state program requirements. Environmental Protection Agency. Final rule.

On February 26, 1980 and May 19, 1980, under the Resource Conservation and Recovery Act (RCRA), the Environmental Protection Agency (EPA) published regulations establishing a system to manage hazardous waste. Those regulations allowed hazardous waste generators to accumulate hazardous waste on-site without obtaining a permit or meeting financial responsibility requirements if they shipped the waste off-site within 90 days. On November 19, 1980, the Agency published an interim final rule which expanded the scope of the provision to include generators who treat, store or dispose of hazardous waste on-site. The final rule published today retains this change. As a result of public comments, the Agency is making several changes to the interim final rule. These changes (1) Clarify that the provision is applicable to all generators, including those who accumulate hazardous waste for the purpose of use, reuse, recycling and reclamation, (2) remove the requirement for use of DOT containers, (3) revise the labelling and marking requirements for wastes accumulated in containers and tanks; and (4) allow an extension to the 90-day accumulation limit in certain circumstances.

Refuse Disposal↗

[Polycyclic aromatic hydrocarbons in industrial solid waste: a preliminary evaluation of the potential risk of environmental and human contamination in waste disposal areas].

Proper solid waste disposal is important to avoid human and environmental contamination. The NBR 10,004 Waste Classification lists several polycyclic aromatic hydrocarbons (PAHs) and indicates that the presence of at least one PAH in a waste sample is enough to classify it as hazardous. The aim of this study was a preliminary evaluation of PAHs in solid waste samples from selected industries to obtain a preliminary overview of their potential for contamination in case of improper disposal. One or more PAHs listed in NBR 10,004 (benzo[a]anthracene, benzo[a]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, indene[1,2,3-c,d]pyrene, chrysene, or fluoranthene) were found in all samples, thus leading to their classification as hazardous waste. Our results showed that toxicologically relevant PAHs were found in all the samples, indicating that their final disposal must be performed in appropriate areas in order to minimize human health risks and environmental contamination from waste disposal areas.

Environmental Monitoring↗

Treatment of waste printed wire boards in electronic waste for safe disposal.

The printed wire boards (PWBs) in electronic waste (E-waste) have been found to contain large amounts of toxic substances. Studies have concluded that the waste PWBs are hazardous wastes because they fails the toxicity characteristic leaching procedure (TCLP) test with high level of lead (Pb) leaching out. In this study, two treatment methods - high-pressure compaction and cement solidification - were explored for rendering the PWBs into non-hazardous forms so that they may be safely disposed or used. The high-pressure compaction method could turn the PWBs into high-density compacts with significant volume reduction, but the impact resistance of the compacts was too low to keep them intact in the environment for a long run. In contrast, the cement solidification could turn the PWBs into strong monoliths with high impact resistance and relatively high compressive strength. The leaching of the toxic heavy metal Pb from the solidified samples was evaluated by both a dynamic leaching test and the TCLP test. The dynamic leaching results revealed that Pb could be effectively confined in the solidified products under very harsh environmental conditions. The TCLP test results showed that the leaching level of Pb was far below the regulatory level of 5mg/L, suggesting that the solidified PWBs are no longer hazardous. It was concluded that the cement solidification is an effective way to render the waste PWBs into environmentally benign forms so that they can be disposed of as ordinary solid wastes or beneficially used in the place of concrete in some applications.

Electronics↗

Production of butanol from starch-based waste packing peanuts and agricultural waste.

We examined the fermentation of starch-based packing peanuts and agricultural wastes as a source of fermentable carbohydrates using Clostridium beijerinckii BA101. Using semidefined P2 medium containing packing peanuts and agricultural wastes, instead of glucose as a carbohydrate source, we measured characteristics of the fermentation including solvent production, productivity, and yield. With starch as substrate (control), the culture produced 24.7 g l(-1) acetone-butanol-ethanol (ABE), while with packing peanuts it produced 21.7 g l(-1) total ABE with a productivity of 0.20 g l(-1) h(-1) and a solvent (ABE) yield of 0.37. Cell growth in starch, packing peanuts, and agricultural wastes medium was different, possibly due to the different nature of these substrates. Using model agricultural waste, 20.3g l(-1) ABE was produced; when using actual waste, 14.8 g l(-1) ABE was produced. The use of inexpensive substrates will increase the economic viability of the conversion of biomass to butanol, and can provide new markets for these waste streams.

Acetic Acid↗

A methodology for evaluating the toxicity of radioactive waste and its application to the radioactive waste generated in Pennsylvania.

Communicating with the public on the risks of low-level radioactive waste disposal is difficult due to the lack of comparisons that are understandable to the public. This paper presents a methodology for analyzing the intrinsic toxicity of radionuclides in waste and comparing it to that for soil or other wastes that may contain naturally-occurring radionuclides. The intrinsic toxicity of each radionuclide is normalized by dividing its specific activity in the waste by an appropriate ingestion risk standard, such as the U.S. EPA proposed drinking water limits. To illustrate the usefulness of this method, it was used to analyze Pennsylvania's commercial low-level radioactive waste inventory. The results are presented along with an indication of the usefulness of this method for screening purposes to analyze and identify problematic constituents in various waste streams.

Evaluation Studies as Topic↗

Optimized gel permeation chromatographic cleanup for soil, sediment, wastes, and oily waste extracts for determination of semivolatile organic pollutants and PCBs.

A gel permeation chromatographic (GPC) method, used by the U.S. Environmental Protection Agency (USEPA), was modified for cleanup of soil, sediments, wastes, and oily wastes before determination of semivolatile organic pollutants. The modifications included new calibration procedures and control of the amount of material processed. The modifications were evaluated for soil and sediment matrixes in a 5-laboratory study where each laboratory processed a solution containing a phthalate, substituted phenols and benzenes, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), nitroaniline, and pesticides. With the exception of nitroaniline, analyte recoveries were 87-112%, with relative standard deviations (RSDs) of 6.7-26%. Soil samples containing PCBs and fortified with 6 pesticides at 0.7-4 micrograms/g were also analyzed by the 5 laboratories. The mean recovery of the 6 pesticides was 100% with a mean RSD of 16%. Mean RSD for the determination of total PCBs was 8.9%. An additional modification for the processing of wastes and high concentration waste samples was attempted; this involved GPC processing of sample extracts dissolved in 1 + 1 butyl chloride-methylene chloride. This modification did not improve recoveries of the semivolatile analytes. Finally, the modified GPC protocol was applied to PCB-contaminated reclaimed waste oils samples. Two GPC cleanup steps were used to separate PCBs from the waste oil samples before PCBs were determined by gas chromatography combined with electron-capture detection (GC/ECD).

Butanes↗

The waste-product theory of aging: simulation of metabolic waste production.

A mathematical model of cellular metabolism is used to relate the rates of cell division and waste production to the concentrations of oxygen and glucose in the medium in which a normal diploid cell culture is grown. The metabolic model in tandem with an earlier waste-content model based on the waste-product theory of aging provides a unified cell-culture model with which population size and intracellular waste content can be calculated. Population size is measured by the number of population doublings which have been achieved. After suitable adjustment of parameters in the metabolic model, maximum values of population size are calculated numerically with the use of the unified model. Results show that the population maxima are related in a plausible way to the oxygen and glucose concentrations. The effects of temperature changes and contact inhibition of growth are also simulated. Small changes in the cell-division and waste-production rates can cause transformation to unlimited growth in the waste-content model, but the unified model is not correspondingly sensitive to changes in the oxygen and glucose concentrations or to changes in temperature.

Cell Division↗

Determination of sterols, estrogens and inorganic ions in waste water and size-segregated aerosol particles emitted from waste water treatment.

Concentrations of steroids and inorganic ions were measured in waste water of an aerated sand trap as well as in aerosol particles emitted from this tank at the waste water treatment plant (WWTP) of Bayreuth, Germany, in January and February 2003. The investigations comprised seven sterols, two estrogens, and several inorganic ions. Since an appropriate method for the determination of sterols in waste water was not available, a new method based on solid phase extraction was developed. The concentrations of the sterols coprostanol and cholesterol amounted to 30-180 microg l(-1) in waste water and to 400-5000 pg m(-3) in aerosol particles. All other sterols were present in markedly lower concentrations. The mean concentrations of the two estrogens estrone and 17beta-estradiol were about 165 pg m(-3) in aerosol particles. The steroid concentrations in both waste water and aerosol particles varied greatly over time, however with the exception of coprostanol, no clear correlation was detected between concentrations in waste water and aerosol particles.

Aerosols↗