SEARCH · PubMed Health

Results for “inoculum”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

PubMed1996

Significance of pre-incubation temperature and inoculum concentration on subsequent growth of Listeria monocytogenes at 14 degrees C.

The influence of the bacterial concentration of an inoculum (10(1) or 10(3) cfu ml-1) of two strains of Listeria monocytogenes (Scott A: serotype 4b and V7: serotype 1) and one strain of L. innocua (Lin 11), and the time and temperature at which the inoculum was stored (cold storage: 4 degrees C for 4 weeks, or without cold storage: -20 degrees C before immediate transfer), and the temperature at which cells were pre-incubated (30 degrees C and 14 degrees C) on subsequent growth in Richard's broth at 14 degrees C was investigated. Richard's broth at a pH 5.9 was used to simulate potential growth in soft cheese (camembert type) and an incubation temperature of 14 degrees C was used to simulate storage-temperature ripening of cheese. Enumeration of the number of viable cells was by plate count method, except where viable cell numbers were less that 10(3) cfu ml-1, when the MPN (Most Probable Number) technique was used. With cold storage and an inoculum of 10(3) cfu ml-1 (high bacterial concentration) the pre-incubation temperatures (30 degrees C and 14 degrees C) did not significantly influence the subsequent growth curve: there was no significant lag (less that 21 h) and cell numbers peaked in about 8.5 d. However, with cold storage and an inoculum of 10(1) cfu ml-1 (low bacterial concentration) and a pre-incubation temperature of 30 degrees C a significant shift in the growth curve was observed over that pre-incubated at f14 degrees C, with the appearance of a lag of about 7.7 d. At a pre-incubation temperature of 14 degrees C with the low inoculum concentration, there was a measurable lag of about 1 d. Without cold storage and a pre-incubation temperature of 30 degrees C, there was a lag time of 2.3 d. Storage conditions, pre-incubation temperature and inoculum concentration therefore appear to influence the subsequent growth curve. Importantly, however, the growth curves for cultures from inocula, pre-incubated at either 30 degrees C or 14 degrees C, appeared to involve two distinct values of the exponential growth rate (k): the initial portion of the growth curve described by a low value of k and the subsequent portion by a consistently and significantly greater value. The appearance of two distinct growth phases was reproduced in further data determined for all the studied strains of the microorganism. Further study to explain these unexpected and reproducible findings is being conducted.

Colony Count, Microbial↗

PubMed1985

Inoculum effect of beta-lactam antibiotics on Enterobacteriaceae.

Seven beta-lactam antibiotics were studied for both their antimicrobial activity and the degree to which they produced inoculum effect on Escherichia coli, Klebsiella pneumoniae, and Salmonella typhimurium. Aztreonam, cefoperazone, and ceftazidime were poorly bactericidal, caused marked bacterial filamentation, and exhibited a large inoculum effect on E. coli, K. pneumoniae, and S. typhimurium. Cefotaxime and ceftriaxone were more rapidly bactericidal, caused only a moderate amount of filamentous forms, and exhibited a modest inoculum effect, while cefoxitin and imipenem both were rapidly bactericidal and exhibited only a minimal-to-no-inoculum effect. The inoculum effect did not correlate with drug stability during incubation with the bacteria. Inoculum effect on these species of the family Enterobacteriaceae appears to be a manifestation of increase in optical density secondary to the development of filamentous bacterial forms with an increase in bacterial mass during exposure to antibiotics which are not rapidly bactericidal. These observations have a clear significance for the susceptibility testing of beta-lactam antibiotics when turbidity is used as a parameter to determine presence of bacterial growth.

Anti-Bacterial Agents↗

PubMed1991

Comparison of the inoculum effects of members of the family Enterobacteriaceae on cefoxitin and other cephalosporins, beta-lactamase inhibitor combinations, and the penicillin-derived components of these combinations.

We compared the inoculum effects of 105 recent clinical isolates of the family Enterobacteriaceae on cefoxitin, other cephalosporins, aztreonam, and three beta-lactamase inhibitors (clavulanic acid, sulbactam, and tazobactam) and their penicillin-derived components. Piperacillin and aztreonam showed the largest inoculum effect, and cefoxitin showed the smallest. The other cephalosporins tested (cefotetan, ceftizoxime, and ceftriaxone) showed an intermediate inoculum effect. In general, the inoculum effect was of greater magnitude for the penicillin and beta-lactamase inhibitor combinations than for the cephalosporins tested. Bactericidal activity was assayed and morphologic changes were monitored for selected strains exhibiting a large inoculum effect. MICs correlated with bactericidal activity at an inoculum level of 10(5) CFU/ml, while activity at 10(8) CFU/ml was variable. Cefoxitin demonstrated the least filamentous transformation and the most rapid bactericidal activity. Aztreonam showed the most marked filamentous transformation and was no longer bactericidal at 10(8) CFU/ml. The beta-lactamase inhibitor combinations showed variable bactericidal activity, and regrowth occurred with a number of strains with all three agents tested.

Anti-Bacterial Agents↗

PubMed1997

Net effect of inoculum size on antimicrobial action of ampicillin-sulbactam: studies using an in vitro dynamic model.

To examine the predictable effect of inoculum size on the kinetics of the antimicrobial action of ampicillin-sulbactam, five TEM-1 beta-lactamase-producing Escherichia coli strains were studied in an in vitro dynamic model at two different initial inocula (N0S). All bacteria were exposed to ampicillin-sulbactam in a simulated system reflecting the pharmacokinetic profiles in human tissue after the administration of a single intravenous dose of ampicillin (2 g) plus sulbactam (1 g). Each strain was studied at low (4.0 to 5.2 log CFU/ml) and high (5.0 to 7.1 log CFU/ml) N0S. Despite pronounced differences in susceptibilities, the patterns of the killing curves observed with a given strain at different N0S were similar. As expected, viable bacterial counts increased with inoculum size. Striking visual contrasts in the respective curves for each organism were reflected by the area under the bacterial count-time curve (AUBC) but not by the difference between the N0 and the lowest bacterial counts (Nmin) at the nadir of the killing curve: the N0-associated changes in the AUBC on average were 75%, versus 2.5% for log N0--logNmin. To examine qualitative differences in antimicrobial effects at different N0S (i.e., the net effect of the inoculum), the difference in the high and low N0S was subtracted from each point on the killing curve obtained at the higher N0 for each strain. These adjusted curves were virtually superimposable on the observed killing curves obtained at the lower N0. Moreover, by using adjusted data, the AUBC values were similar at the two inocula, although slight (average, 11%) but systematic increases in the AUBC occurred at high N0S. Thus, there was only a weak net effect of inoculum size on the antibacterial effect of ampicillin-sulbactam. Due to similar slopes of the AUBC-log N0 plots, the antibacterial action at different N0S may be easily predicted by an approximate equation; the predicted AUBCs were unbiased and well correlated with the observed AUBCs (r = 0.997). Compiled data obtained with normalized AUBCs for different strains at different N0S yielded a positive correlation (r = 0.963) between the N0-normalized AUBC and the MIC of ampicillin-sulbactam. The adjustment and normalization procedure described might be a useful tool for revealing the net effect of the inoculum and to predict the inoculum effect if there are no qualitative differences in antimicrobial action at different inocula.

Ampicillin↗

PubMed1994

Inoculum Density-Dependent Mortality and Colonization of the Phyllosphere by Pseudomonas syringae.

Pseudomonas syringae inocula containing cell concentrations ranging from 10 to 10 cells per ml were applied to the primary leaves of bean plants. The plants were incubated under conditions of high temperature and illumination and low relative humidity. Bacterial mortality rates and the proportional population decline of the inoculum were lowest at the highest inoculum concentrations. Addition of a high concentration of heat-killed cells to the inoculum containing a low concentration of viable cells significantly reduced both the mortality rate and the proportional population decline of the viable cells. The mechanisms underlying this density-dependent mortality may include cooperative protective effects of extracellular factors, such as bacterial extracellular polysaccharides, and physical protection by neighboring cells. Although epiphytic populations derived from inoculum concentrations of 10 or 10 cells per ml tended toward 10 CFU/g, the presumed carrying capacity of the leaf, populations derived from lower inoculum concentrations never achieved this carrying capacity. Assuming that epiphytic populations of P. syringae reside in discrete protected sites, our results suggest that at low inoculum concentrations, following a period of environmental stress, the number of viable cells may have dropped to zero in some sites; hence, the carrying capacity of the leaf could not be achieved.

Journal Article↗

PubMed1966

Inoculum-dependent division lag of Bacillus cultures and its relation to an endogenous factor(s) ("schizokinen").

Lankford, C. E. (The University of Texas, Austin), James R. Walker, James B. Reeves, N. H. Nabbut, B. R. Byers, and R. J. Jones. Inoculum-dependent division lag of Bacillus cultures and its relation to an endogenous factor(s) ("schizokinen"). J. Bacteriol. 91:1070-1079. 1966.-When cells of Bacillus megaterium, grown on Brain Heart Infusion Agar, were inoculated into a chemically defined medium, they exhibited a division lag which was an inverse function of inoculum size. The addition of filtrates of cultures from the same medium eliminated the inoculum-dependent component of lag, but not an inoculum-independent residual lag of constant duration. Culture filtrate of B. subtilis var. niger not only eliminated its inoculum-dependent lag but also was required to sustain exponential division. Dose-response and "growth time" bioassays, developed to measure lag-reducing activity of filtrates, demonstrated accumulation of active filtrate factor to a "critical" concentration prior to division initiation. Addition of this concentration to cultures eliminated the inoculum-dependent lag. Accumulation of the factor ceased temporarily at onset of division, but excretion was resumed later during exponential growth. Accumulation of a lag-reducing, cell-associated factor followed a similar course. Chromatographic and bioautographic analyses of culture filtrates of B. megaterium indicated that a single substance was primarily responsible for their activity. Results of dose-response tests for reciprocal activities of filtrates of different Bacillus species and strains suggested production of different factors by some, and of different quantities of similar factors by others. It is proposed that such endogenous factors which are synthesized and accumulate to a population-dependent concentration as a requisite to initiation and maintenance of division be designated as "schizokinens."

Bacillus cereus↗

PubMed1988

Multicenter evaluation of four methods of yeast inoculum preparation.

We initiated a comparative study of four methods of yeast inoculum preparation: a spectrophotometric method, the Wickerham card method, a hemacytometer method, and the Prompt inoculation system. The variability in inoculum size obtained when each method was applied to two strains each of Candida albicans, Candida tropicalis, Candida parapsilosis, Torulopsis glabrata, Cryptococcus neoformans, and Saccharomyces cerevisiae was analyzed in a single laboratory. Each method was performed in triplicate on the same day and on three separate days to provide estimates of within-day and between-day variations. Inoculum size was determined by viable colony counts. The greatest range of inoculum sizes was seen with the Wickerham card method. Viable counts ranged from 1.1 X 10(6) to 24.2 X 10(6) CFU/ml among the 12 yeast isolates. The greatest variation was observed with the Prompt system. Within-day coefficients of variation averaged 19% (range, 4 to 45%), and between-day coefficients of variation averaged 22% (range, 3 to 51%). Variation between laboratories was evaluated by comparing inoculum values obtained by each method in three different laboratories for two strains of C. albicans. The spectrophotometric method was the least variable and the Wickerham card and hemacytometer methods were the most variable methods between laboratories. The spectrophotometric method is recommended as the method of choice for preparation of a standardized inoculum suspension for susceptibility testing of yeasts.

Candida↗

PubMed1994

Evaluation of differential inoculum disk diffusion method and Vitek GPS-SA card for detection of oxacillin-resistant staphylococci.

This study was conducted in order to compare the accuracy of detection of oxacillin-resistant staphylococci, defined by microdilution MICs, population analyses, and mec gene hybridization, with the Vitek GPS-SA Susceptibility Card with that of the standard inoculum (10(7) CFU) and high-inoculum (10(9) CFU) disk diffusion tests. By the standard inoculum disk diffusion test, 10 of 67 (15%) isolates of oxacillin-resistant Staphylococcus aureus and 3 of 47 (6%) isolates of Staphylococcus epidermidis were falsely susceptible after 24 h of incubation at 35 degrees C. By the high-inoculum disk diffusion test (10(9) CFU), 4 of the 10 isolates of S. aureus remained falsely susceptible, whereas none of the isolates of S. epidermidis was falsely susceptible. Of the 10 isolates of S. aureus falsely susceptible by the standard disk test, only one remained falsely susceptible after an additional 24 h of incubation at 22 degrees C. All four isolates of S. aureus that were falsely susceptible by the high-inoculum disk diffusion test after 24 h of incubation at 35 degrees C became resistant after an additional 24 h of incubation at 22 degrees C. Thus, extended incubation of both the standard and high-inoculum disk diffusion tests increased their accuracy in detecting oxacillin resistance. All isolates of oxacillin-resistant staphylococci were accurately detected with the Vitek software upgrades (6.1 and 7.1) of the GPS-SA card.

Evaluation Studies as Topic↗

PubMed2001

Influence of glucose supplementation and inoculum size on growth kinetics and antifungal susceptibility testing of Candida spp.

The influences of inoculum size and glucose supplementation on the growth kinetics of 60 Candida spp. clinical isolates (Candida albicans, Candida tropicalis, Candida parapsilosis, Candida glabrata, Candida krusei, and Candida lusitaniae [10 isolates each]) are assessed. The combined influence of growth and reading method (visual or spectrophotometric) on the determination of the MICs of amphotericin B, flucytosine, fluconazole, itraconazole, ketoconazole, and voriconazole is also analyzed, and the MICs are compared with those determined by the National Committee for Clinical Laboratory Standards standard microdilution method (NCCLS document M27-A). Glucose supplementation and inoculum size had a significant influence on the growth cycles of these yeasts, and a statistically significant denser growth (optical density at 540 nm) was seen for both incubation periods, 24 and 48 h (P < 0.01). A longer exponential phase and shorter lag phase were also observed. The A540 values at 24 h of incubation with medium containing glucose and an inoculum of 10(5) CFU/ml were >0.4 U for all species, with the exception of that for C. parapsilosis (A540 = 0.26 +/- 0.025). The MICs at 24 h determined by testing with 2% glucose and an inoculum of 10(5) CFU/ml showed the strongest agreement (96.83%) with MICs determined by the reference method. MICs were not falsely elevated, and good correlation indexes were obtained. The reproducibility of results with this medium-inoculum combination was high (intraclass correlation coefficient, 0.955). The best agreement and reproducibility of results for spectrophotometric readings were achieved with endpoints of 50% growth inhibition for flucytosine and azoles and 95% for amphotericin B. Supplementation of test media with glucose and an inoculum size of 10(5) CFU/ml yielded a reproducible technique that shows elevated agreement with the reference procedures and a shorter incubation period for obtaining reliable MIC determinations. The spectrophotometric method offers an advantage over the visual method by providing a more objective and automated MIC determination.

Candida↗

PubMed2005

Analysis of the influence of Tween concentration, inoculum size, assay medium, and reading time on susceptibility testing of Aspergillus spp.

The influence of several test variables on susceptibility testing of Aspergillus spp. was assessed. A collection of 28 clinical isolates was tested against amphotericin B, itraconazole, voriconazole, and terbinafine. Inoculum size (10(4) CFU/ml versus 10(5) CFU/ml) and glucose supplementation (0.2% versus 2%) did not have significant effects on antifungal susceptibility testing results and higher inoculum size and glucose concentration did not falsely elevate MICs. In addition, antifungal susceptibility testing procedure with an inoculum size of 10(5) CFU/ml distinctly differentiated amphotericin B or itraconazole-resistant Aspergillus strains in vivo from the susceptible ones. Time of incubation significantly affected the final values of MICs, showing major increases (two to six twofold dilutions, P < 0.01 by analysis of variance) between MIC readings at 24 and 48 h, but no differences were observed between antifungal susceptibility testing results obtained at 48 h and at 72 h. Significantly higher MICs were uniformly associated with higher concentrations of Tween (P < 0.01), used as a dispersing agent in the preparation of inoculum suspensions. The geometric mean MICs showed increases of between 1.5- and 10-fold when the Tween concentration varied from 0.1% (the geometric means for amphotericin B, itraconazole, voriconazole, and terbinafine were 1.29, 0.69, 1.06, and 0.64 mug/ml, respectively) to 5% (the geometric means for amphotericin B, itraconazole, voriconazole, and terbinafine were 1.97, 5.79, 1.60, and 4.66 mug/ml, respectively). The inhibitory effect of Tween was clearly increased with inoculum sizes of 10(5) CFU/ml and was particularly dramatic for itraconazole, terbinafine, and Aspergillus terreus. The inoculum effect was not observed when the Tween concentration was below 0.5% (P > 0.01).

Aspergillus↗

PubMedDate not supplied

[Effect of inoculum size on sensitivity and specificity of the double-disk synergy test for the detection of wide-spectrum beta-lactamases].

The plasmid-mediated extended-spectrum beta-lactamases (ESBL) confer resistance to oxymino-cephalosporins, such as cefotaxime, ceftazidime, and ceftriaxone and to monobactams such as aztreonam. It is well known fact that ESBL producing bacteria exhibit a pronounced inoculum effect against broad spectrum cephalosporins like ceftazidime, cefotaxime, ceftriaxone and cefoperazone. The aim of this investigation was to determine the effect of inoculum size on the sensitivity and specificity of double-disk synergy test (DDST) which is the test most frequently used for detection of ESBLs, in comparison with other two methods (determination of ceftazidime MIC with and without clavulanate and inhibitor potentiated disk-diffusion test) which are seldom used in clinical laboratories. The experiments were performed on a set of K. pneumoniae strains with previously characterized beta-lactamases which comprise: 10 SHV-5 beta-lactamase producing K. pneumoniae, 20 SHV-2 + 1 SHV 2a beta-lactamase producing K. pneumoniae, 7 SHV-12 beta-lactamase producing K. pneumoniae, 39 putative SHV ESBL producing K. pneumoniae and 26 K. pneumoniae isolates highly susceptible to ceftazidime according to Kirby-Bauer disk-diffusion method and thus considered to be ESBL negative. According to the results of this investigation, increase in inoculum size affected more significantly the sensitivity of DDST than of other two methods. The sensitivity of the DDST was lower when a higher inoculum size of 10(8) CFU/ml was applied, in distinction from other two methods (MIC determination and inhibitor potentiated disk-diffusion test) which retained high sensitivity regardless of the density of bacterial suspension. On the other hand, DDST displayed higher specificity compared to other two methods regardless of the inoculum size. This investigation found that DDST is a reliable method but it is important to standardize the inoculum size.

Amoxicillin-Potassium Clavulanate Combination↗

PubMed1996

[Long-term culture: evidence of the capacity of stroma to sustain hematopoiesis of a second inoculum].

PURPOSE: To analyze, in two-stages long term bone marrow cultures (LTBMC), the efficiency of the method used for irradiation of the stroma and to check if after that, it's capable to support the hematopoiesis. MATERIAL AND METHODS: We have used for the first inoculum, bone marrow cells from eight controls. They were cultured at 2 x 10(6) cells/ml concentration until obtaining a fully confluent stroma which was irradiated with 15 Gy. After that, over this layer, we put a second inoculum with bone marrow cells in four cases, and with peripheral blood cells in four others, at a concentration of 1 x 10(5) cells/mL. In four cases the first inoculum was from a man and the second from a woman. The culture's haematopoietic activity was determined by the number of CFU-GM, total cell counts and the differential counts during four weeks. At the end of the study we recovered the cells from the supernatant of the culture and they were analyzed by in situ hybridization with an alpha centromeric probe specific to the X chromosome. RESULTS: In all cases we obtained a confluent stroma with production of haematopoiesis (cobblestone areas). The cells recovered at the end of the culture were, in all cases, from the second inoculum because they had a double signal with the X probe. The number of CFU-GM obtained was higher in bone marrow than in peripheral blood (34.5 and 9.2 respectively) however, the total cells were similar in both cases (2.3 x 10(5) and 2.9 x 10(5)) although the cellular subtypes varied depending on the second inoculum (B.M. or P.B.). CONCLUSION: Our data confirm that the dose of 15 Gy eradicate the haemopoiesis of first inoculum, which allowed to analyze stroma and progenitor cells, separately. In addition, the stroma is capable to support the hematopoiesis generated by progenitor cells from peripheral and bone marrow.

Adipose Tissue↗

PubMed2026

The inoculum effect of methicillin-susceptible Staphylococcus aureus on cefazolin and other antimicrobial agents.

UNLABELLED: The inoculum effect (IE) refers to a reduced susceptibility of methicillin-susceptible Staphylococcus aureus (MSSA) to certain antibiotics under high bacterial inocula and may contribute to treatment failure. This exploratory study assessed IE prevalence among 234 nonduplicate MSSA isolates across 11 agents spanning major therapeutic classes, including cefazolin, and characterized IE-positive clones via whole-genome sequencing to inform clinical strategies. Minimum inhibitory concentrations (MICs) were determined by broth microdilution at standard and high inocula. Whole-genome sequencing was performed on IE-positive strains to identify β-lactamase types and conduct multilocus sequence typing. The highest prevalence of IE was observed for trimethoprim-sulfamethoxazole (9.4%), followed by erythromycin (8.8%), linezolid (6.8%), penicillin (6.1%), clindamycin (5.5%), vancomycin (3.8%), cefazolin (3.0%), levofloxacin (1.5%), tetracycline (0.5%), and oxacillin and gentamicin (0.0%). All cefazolin IE-positive strains carried blaZ type A, and ST25 was the most common sequence type (42.9%). For trimethoprim-sulfamethoxazole, erythromycin, and clindamycin IE, ST7 was the most common sequence type (22.7%, 26.7%, and 33.3%, respectively). ST1281 and ST188 were the predominant sequence types among strains exhibiting linezolid IE and vancomycin IE (25.0% and 33.3%, respectively). Among the 234 MSSA strains, 66.7% of ST59, 60.0% of ST25, 58.3% of ST5, and 54.2% of ST7 strains exhibited IE to at least one antimicrobial agent. Cefazolin IE was associated with blaZ type A, and ST5, ST7, ST59, and ST25 were the major sequence types associated with IE across the antimicrobial classes tested. IMPORTANCE: Methicillin-susceptible Staphylococcus aureus (MSSA) can show an inoculum effect on multiple antimicrobial agents, which may reduce antibiotic activity under high-burden conditions. In this study, MSSA isolates from Shanghai exhibited inoculum effects on several commonly used agents, although the overall detection rates were low. Cefazolin inoculum effect was specifically associated with blaZ type A, and several major sequence types were more likely to exhibit this phenotype. These findings improve our understanding of the epidemiology of the inoculum effect in MSSA and may help guide laboratory detection and antimicrobial treatment decisions.

Cefazolin↗

PubMed2000

Sorbic acid resistance: the inoculum effect.

Zygosaccharomyces is a genus associated with the more extreme spoilage yeasts. Zygosaccharomyces spoilage yeasts are osmotolerant, fructophiles (preferring fructose), highly-fermentative and extremely preservative-resistant. Zygosaccharomyces bailii can grow in the presence of commonly-used food preservatives, benzoic, acetic or sorbic acids, at concentrations far higher than are legally permitted or organolepically acceptable in foods. An inoculum effect has been described for many micro-organisms and antimicrobial agents. The minimum inhibitory concentration (MIC) increases with the size of the inoculum; large inocula at high cell density therefore require considerably higher concentrations of inhibitors to prevent growth than do dilute cell suspensions. A substantial inoculum effect was found using sorbic acid against the spoilage yeast Zygosaccharomyces bailii NCYC 1766. The inoculum effect was not caused by yeasts metabolizing or adsorbing sorbic acid, thereby lowering the effective concentration; was not due to absence of cell-cell signals in dilute cell suspensions; and was not an artefact, generated by insufficient time for small inocula to grow. The inoculum effect appeared to be caused by diversity in the populations of yeast cells, with higher probability of sorbic acid-resistant cells being present in large inocula. It was found that individual cells of Zygosaccharomyces bailii populations, grown as single cells in microtitre plate wells, were very diverse, varying enormously in resistance to sorbic acid. 26S ribosomal DNA sequencing did not detect differences between the small fraction of resistant 'super cells' and the average population. Re-inoculation of the 'super cells' after overnight growth on YEPD showed a normal distribution of resistance to sorbic acid, similar to that of the original population. The resistance phenotype was therefore not heritable and not caused by a genetically distinct subpopulation. It was concluded that resistance of the spoilage yeast Zygosaccharomyces bailii to sorbic acid was due to the presence of small numbers of phenotypically resistant cells in the population.

Base Sequence↗

PubMed2002

Use of frozen bagged seed inoculum for secondary metabolite and bioconversion processes at the pilot scale.

Frozen bagged seed inoculum was prepared, thawed and tested for seven cultures. Thawing techniques were developed and other key influences on thawing rate were quantified; seed bag thawing without a water bath rarely required more than 4 to 5 h and was as short as 0.5 to 1 h for lower fill volume bags. Testing included growth of bagged seed as a function of bag fill volume (0.5, 1.0, 2.0, and 3.5 L), comparison of culture age at time of bagging, growth of bagged versus laboratory-prepared seed, productivity of production cultures derived from bagged versus laboratory-prepared seed, growth of bagged seed as a function of volume percent glycerol added at time of bagging, and growth of bagged seed as a function of frozen storage time and temperature. For each culture tested, conditions were developed such that seed tanks inoculated with bagged seed showed only minimal delay in attaining the target oxygen uptake rate (OUR) relative to seed tanks inoculated with laboratory-prepared inoculum. Although the bag fill volume did influence culture growth in some cases, bag fill volumes required were reasonable (typically 2.0 to 3.5 L) compared with laboratory seed inoculum volumes of 2.0 L. In the most remarkable example, frozen bagged seed was prepared from a second-stage seed-tank cultivation of Glarca lozoyensis, then thawed and inoculated into first-stage seed medium. It grew to the desired OUR in a similar timeframe as laboratory-prepared inoculum inoculated into first-stage seed medium. Thus, the frozen bagged seed replaced an existing laboratory inoculum preparation period of 7 days without an appreciable delay in either of the two subsequent seed-tank growth stages. Furthermore, productivities were found to be comparable for bagged-seed-derived and laboratory-seed-derived production cultivations for four different fermentation processes.

Bioreactors↗

PubMed2006

Biodegradability testing using standardized microbial communities as inoculum.

Reference materials are important tools for maintaining high-quality assurance standards, including for biological materials. A significant number of environmental international standards, including biodegradability and toxicity, involve utilization of activated sludge (AS) inocula. The absence of inoculum standardization in these tests is a potential source of error influencing the results. In this study three defined microbial consortia, two commercial inocula and a designed bacterial inoculum, were evaluated as an AS alternative seed for the Zahn-Wellens test, using diethylene glycol as the reference chemical. The results showed that to achieve diethylene glycol biodegradation with these inocula, a number of 10(5) colony-forming units per milliliter of effective degrader microorganisms had to be present. Moreover, the addition of AS supernatant to the test mixtures improved inocula performance (the biodegradability curves), bringing them closer to those obtained with AS inocula. Among the three defined consortia, the designed inoculum replicates bested the AS behavior in the range of concentrations tested, with degradation completed in 12-14 days. Comparisons of the community substrate utilization profiles corroborated these results, showing that the designed inoculum profile was the most similar to the AS profile. The biodegradability and metabolism results provided support for the assertion that the designed inoculum can be used in the Zahn-Wellens test and as a base to develop reference inocula for other biodegradability and toxicity tests.

Bacteria↗

PubMed1995

Bacterial inoculum density and probability of para-nitrophenol biodegradability test response.

This study has been carried out to establish a model linking probability of positive response in para-nitrophenol biodegradability test to controlled variables of the test (suspended solids, SS; total bacteria, AODC; cultivable bacteria, CFU; specific biodegraders, MPN). Series of dilution of 11 raw inocula (6 activated sludges, 5 river waters) were tested. They reveal very dispersed values of biomass measured as SS, AODC, and CFU and quite comparable values of specific biodegraders for each category of inoculum (river or sludge). The proposed model fits well the empirical distribution of the experimental frequency of positive results versus inoculum density for each controlled variable. The constants k of the model, representing the fraction of biodegraders for each inoculum, were tested by the likelihood ratio test and were proven to be different from one another according to the biomass descriptor and the origin of the inoculum. The probabilistic model, in the case of para-nitrophenol biodegradation, indicates that standardized official tests (closed bottle, AFNOR, Sturm, and MITI I) are seldom optimal under those conditions. It allows the determination of which inoculum concentration can lead to a high probability (e.g., 99.9%) of observing paranitrophenol biodegradation by raw inocula.

Bacteria↗

PubMed1996

Accelerated Biodegradation of High and Low Concentrations of p-Nitrophenol (PNP) by Bacterial Inoculation in Industrial Wastewater: The Role of Inoculum Size on Acclimation Period

The effect of inoculum size on the acclimation period and rate and extent of p-nitrophenol (PNP) degradation at high (1-10 mg/L) and low (26 &mgr;g/L) concentrations for two bacteria was determined in defined media as well as industrial wastewater. Increased inoculum size did not affect the acclimation period of either bacterium at high (1-10 mg/L) PNP concentrations. At low PNP concentrations (26 &mgr;g/L), the two bacteria behaved differently. The acclimation period was shortened and both the rate and extent of mineralization of PNP were enhanced by increasing the Corynebacterium sp. inoculum size from 3 x 10(5) to 3 x 10(6) cells/ml. Addition of phosphate or elimination of predators also reduced the acclimation period. Conversely, increasing the inoculum size from 3 x 10(5) to 5 x 10(6) cells/ml of Pseudomonas putida lengthened the acclimation period and reduced both the rate and extent of mineralization. It is suggested that, in a given environment, the success of an introduced species to enhance the degradation of a chemical depends upon (i) concentration of the chemical, (ii) selection of an appropriate microorganism, and (iii) utilization of a suitable inoculum size.

Journal Article↗