PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Alginates”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

Collagen gene expression and mechanical properties of intervertebral disc cell-alginate cultures.

Cells of the intervertebral disc have a limited capacity for matrix repair that may contribute to the onset and progression of degenerative disc changes. In this study, the biosynthetic capacity of cells isolated from specific regions of the porcine intervertebral disc was evaluated in vitro. Using a competitive reverse transcription-polymerase chain reaction technique, gene expression levels for types I and II collagen were quantified in cells cultured for up to 21 d in a three-dimensional alginate culture system and compared to levels obtained for cells in vivo. The mechanical properties of cell-alginate constructs were measured in compression and shear after periods of culture up to 16 weeks. Cells from the anulus fibrosus expressed the most type I collagen mRNA in vivo and in vitro, while cells from the transition zone expressed the most type II collagen mRNA in vivo and in vitro. Mechanical testing results indicate that a mechanically functional matrix did not form at any time during the culture period; rather, decreases of up to 50% were observed in the compressive and shear moduli of the cell-alginate constructs compared to alginate with no cells. Together with results of prior studies, these results suggest that intervertebral disc cells maintain characteristics of their phenotype when cultured in alginate, but the molecules they synthesize are not able to form a mechanically functional matrix in vitro.

Alginates↗

Oxygen-dependent upregulation of transcription of alginate genes algA, algC and algD in Pseudomonas aeruginosa.

The mRNA levels of algA, algC and algD genes increased, coordinately, in cells of the highly mucoid Pseudomonas aeruginosa 8821M grown under increasing dissolved oxygen tensions (DOT) of up to 70% of air saturation. These genes encode the bifunctional protein with phosphomannose isomerase (PMI) and GDP-mannose pyrophosphorylase (GMP) activities (algA), the phosphomannomutase (PMM) (algC) and the GDP-mannose dehydrogenase (GMD) (algD). These four enzyme activities are necessary for the synthesis of GDP-mannuronic acid, which is the activated sugar precursor for alginate polymerization. For growth-limiting DOT--lower than 10% of air saturation--the increase in mRNA levels of algA, algC and algD with oxygen concentration was accompanied by a strong increase in the activity of the encoded enzymes and the consequent increase in alginate synthesis. However, and despite the upregulation of alginate gene transcription by DOT above 10% of air saturation, the activities of the encoded enzymes either maintained (GMP and GMD) or decreased (PMI and PMM) their levels at high oxygen tensions, leading to a slight decrease in alginate synthesis. This has previously been attributed to the oxidative inactivation of alginate enzymes, particularly of PMM and PMI activities.

Alginates↗

Use of floating alginate gel beads for stomach-specific drug delivery.

Two types of alginate gel beads capable of floating in the gastric cavity were prepared. The first, alginate gel bead containing vegetable oil (ALGO), is a hydrogel bead and its buoyancy is attributable to vegetable oil held in the alginate gel matrix. The model drug, metronidazole (MZ), contained in ALGO was released gradually into artificial gastric juice, the release rate being inversely related to the percentage of oil. The second, alginate gel bead containing chitosan (ALCS), is a dried gel bead with dispersed chitosan in the matrix. The drug-release profile was not affected by the kind of chitosan contained in ALCS. When ALCS containing MZ was administered orally to guinea pigs, it floated on the gastric juice and released the drug into the stomach. Furthermore, the concentration of MZ at the gastric mucosa after administration of ALCS was higher than that in the solution, though the MZ serum concentration was the same regardless of which type of gel was administered. These release properties of alginate gels are applicable not only for sustained release of drugs but also for targeting the gastric mucosa.

Alginates↗

Comparative studies on polyelectrolyte complexes and mixtures of chitosan-alginate and chitosan-carrageenan as prolonged diltiazem clorhydrate release systems.

The aim of this work was to evaluate the possibility of using mixtures and/or polyelectrolyte complexes from both chitosan-alginate and chitosan-carrageenan as prolonged drug release systems. Different dissolution profiles were obtained by changing the polymer matrix system (chitosan-alginate or chitosan-carrageenan) and the method used to include these polymers into the formulation (physical mixture or polyelectrolyte complex). Drug dissolution profiles from the matrices have been discussed by considering the swelling behavior of the polymers used. The swelling behavior of the chitosan-carrageenan and chitosan-alginate systems was analyzed by using the Hopfenberg model which permits to separate the diffusional contribution, kf, from the relaxational contribution, kr, involved in solvent penetration/sorption in glassy polymers. The chitosan-alginate system is better than the chitosan-carrageenan system as prolonged drug release matrix because the drug release is controlled at low percentage of the polymers in the formulation, the mean dissolution time is high, and different dissolution profiles could be obtained by changing the mode of inclusion of the polymers. Good agreement between td and kf/kr values for the system chitosan-alginate was found, which means that the swelling behavior of the polymers controlled the drug release from the matrix. In the case of the system chitosan-carrageenan, the high capacity of carrageenan promotes the entry of water into the tablet and therefore the main mechanism of drug release would be the disintegration instead of the swelling of the matrix.

Alginates↗

Galactose-substituted alginate: preliminary characterization and study of gelling properties.

Coupling of alginate with 1-amino-1-deoxygalactose in the presence of 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide results in a substituted polymer containing galactose side linked via an amide bond. To clarify the degree and pattern of substitution, a (1)H NMR study on the anomeric region of modified alginate, polymannuronate, alginate enriched in guluronic acid (G-enriched alginate), and polyalternating MG, was carried out (G, alpha-l-guluronic acid; M, beta-d-mannuronic acid). From the resonance of the proton at position 1 of galactosylamine, it was possible to determine the amount of galactose linked to mannuronic and to guluronic residues, respectively. Furthermore, (1)H NMR spectroscopy revealed a higher reactivity of guluronic residues for low degrees of conversion. Modified alginates with 7% and 19% of substitution are both able to form stable beads in the presence of calcium ions. The effect of galactose substitution on the dimensions, swelling, and stability of the beads has been studied and the cytotoxicity of the modified polymer evaluated in preliminary biological tests.

Alginates↗

New hypothesis on the role of alternating sequences in calcium-alginate gels.

The availability of mannuronan and mannuronan C-5 epimerases allows the production of a strictly alternating mannuronate-guluronate (MG) polymer and the MG-enrichment of natural alginates, providing a powerful tool for the analysis of the role of such sequences in the calcium-alginate gel network. In view of the calcium binding properties of long alternating sequences revealed by circular dichroism studies which leads eventually to the formation of stable hydrogels, their direct involvement in the gel network is here suggested. In particular, 1H NMR results obtained from a mixed alginate sample containing three polymeric species, G blocks, M blocks, and MG blocks, without chemical linkages between the block structures, indicate for the first time the formation of mixed junctions between G and MG blocks. This is supported by the analysis of the Young's modulus of hydrogels from natural and epimerized samples obtained at low calcium concentrations. Furthermore, the "zipping" of long alternating sequences in secondary MG/MG junctions is suggested to account for the shrinking (syneresis) of alginate gels in view of its dependence on the length of the MG blocks. As a consequence, a partial network collapse, macroscopically revealed by a decrease in the Young's modulus, occurred as the calcium concentration in the gel was increased. The effect of such "secondary" junctions on the viscoelastic properties of alginate gels was evaluated measuring their creep compliance under uniaxial compression. The experimental curves, fitted by a model composed of a Maxwell and a Voigt element in series, revealed an increase in the frictional forces between network chains with increasing length of the alternating sequences. This suggests the presence of an ion mediated mechanism preventing the shear of the gel.

Alginates↗

New insights into the mechanism of gelation of alginate and pectin: charge annihilation and reversal mechanism.

Studies have been undertaken on the binding of Mn2+ ions to two alginate samples of different mannuronate:guluronate ratios (M:G), a sample of low-ester amidated pectin and poly(acrylic acid) (PAA). The binding of Ca2+ ions has also been included for the latter for comparison. The binding curves showed an initial steep rise at low additions of Mn2+ or Ca2+ indicating that all of the ions were bound to the polymer chains with none remaining in solution. At higher additions, the binding curves showed a plateau region and the maximum amount bound, theta, was found to be 0.2, 0.2, 0.25, and 0.33 mol M(2+)/mol COO- for high M:G alginate, low M:G alginate, pectin, and PAA, respectively. The binding curves for Mn2+ and Ca2+ with PAA were superimposable. In all cases, theta was less than the stoichiometric equivalent and also less than predicted by Manning counterion condensation theory. The linear charge density, xi, for the polymers is 1.49, 1.55, 1.62, and 2.85, and it was found that at maximum binding the effective linear charge density, xi(effective), decreased to a value close to 1 in each case and not 0.5 as predicted from Manning's two-variable theory. The mobility of the PAA chains has been followed by electron spin resonance spectroscopy using nitroxide spin labels covalently attached to the polymer, and the gelation of the pectin and alginate samples has been monitored using small deformation oscillatory experiments. For PAA at maximum binding, it was noted that there was a loss of chain mobility and precipitation. For pectin and alginate, gelation occurred and the stoichiometric ratio for maximum binding corresponded to the stoichiometric ratio for the maximum in G'. Precipitation and gelation are attributed to the formation of polymer-metal complexes involving one or two carboxylate groups resulting in charge reversal or charge annihilation.

Alginates↗

pH-induced self-assembly and capsules of sodium alginate.

In this investigation, we used a kind of polyelectrolyte, sodium alginate, as a model biomacromolecule to investigate the aggregation behaviors in aqueous solution after partial protonation of carboxylate groups in the alginate molecules. It is demonstrated that the alginate assemblies with core-shell structure can be generated by the partial protonation of carboxylate groups in sodium alginate chains using the protons released gradually from the reaction of K(2)S(2)O(8) with water at 70 degrees C in aqueous solution. The partial cross-linked alginate assemblies are pH sensitive and can change to hollow structure in the medium with relatively high pH value. This approach avoids use of block or grafted copolymers as the precursors or any other template to prepare assemblies and capsules, and provides a functional surface for subsequent chemical reaction at the surface (e.g., for binding biomolecules and for surface grafting). Such unique assemblies are also expected to be useful in biomedical fields.

Alginates↗

Preservation of chitinolytic Pantoae agglomerans in a viable form by cellular dried alginate-based carriers.

Improved viability of Gram-negative bacteria during freeze-dehydration, storage, and soil inoculation is of crucial importance to their efficient application. The chitinolytic Pantoae (Enterobacter) agglomerans strain IC1270, a potential biocontrol agent of soil-borne plant-pathogenic fungi, was used as a model organism to study the efficacy of freeze-dried alginate-based beads (macrocapsules) as possible carriers for immobilized Gram-negative bacterial cells. These macrocapsules were produced by freeze-dehydration of alginate gel spherical beads, in which different amounts of bacteria, glycerol, and colloidal chitin were entrapped. Subsequent drying produced different unexpected structures, pore-size distributions, and changes in the outer and inner appearance of the resultant dried cellular solid. With increasing glycerol content, the proportion of larger pores increased. These structures can be related to changes in the slow-release properties of the dried beads. The amount of glycerol in the beads differed from that in the alginate solution as a result of leakage during the beads' preparation and dehydration. Entrapping 10(9) cells per bead produced from alginate solution containing 30% glycerol and 1% chitin resulted in improved (in comparison to other studies) survival prospects (95%) during freeze-drying. Moreover, immobilization of the bacterium sharply improved its survival in nonsterile irrigated and dry soils compared to bacteria in a water suspension. The results suggest that optimized conservation of Gram-negative bacteria in dry glycerol-containing alginate-based cellular solids is not only possible but applicable for a variety of uses.

Alginates↗

Electrostatic encapsulation and growth of plant cell cultures in alginate.

The growth of callus tissue from African Violets, encapsulated in alginate using electrostatics, was investigated as well as the mechanism of alginate droplet formation. Alginate microbeads as small as 500 (+/-50) microns in diameter could be produced by electrostatic extrusion directly from a plastic syringe (1900 micron extrusion orifice), in the absence of a needle. Video analysis of the mechanism of electrostatic alginate droplet formation from the syringe showed the development of a Taylor cone-like droplet which extended to form a thin strand that then broke up into droplets. Autoclaving of the alginate/medium solution significantly reduced its viscosity, giving smaller beads. Calculated microbead diameters agreed well with experimental values. Callus tissue from leaf explants was successfully immobilized and cultured using electrostatic extrusion. Tissue immobilized using 4% alginate in medium and cultured on agar grew best, producing a complete plantlet within four months. The long-term aim is to develop an effective method for large production of artificial seeds.

Alginates↗

Effect of gamma-irradiation on degradation of alginate.

The aqueous solution of alginate was irradiated by 60Co gamma-rays in the dose range of 10-500 kGy. To assess the effect of irradiation on the degradation of alginate, the irradiation-induced changes in the viscosity, molecular weight, color, monomer composition, and sequence were measured. The molecular weight of raw alginate was reduced from 300000 to 25000 when irradiated at 100 kGy. The degradation rate decreased and the chain breaks per molecule increased with increasing irradiation dose. The viscosity of irradiated alginate solution reached a near minimum as low as at 10 kGy. No appreciable color changes were observed in the samples irradiated at up to 100 kGy, but intense browning occurred beyond 200 kGy. The 13C NMR spectra showed that homopolymeric blocks, MM and GG, increased and the M/G ratio decreased with irradiation. Considering both the level of degradation and the color change of alginate, the optimum irradiation dose was found to be 100 kGy.

Alginates↗

Controlled release of diuron from an alginate-bentonite formulation: water release kinetics and soil mobility study.

The herbicide diuron was incorporated in alginate-based granules to obtain controlled release (CR) properties. The standard formulation (alginate-herbicide-water) was modified by the addition of different sorbents. The effect on diuron release rate caused by incorporation of natural and acid-treated bentonites in alginate formulation was studied by immersion of the granules in water under static conditions. The release of diuron was diffusion-controlled. The time taken for 50% release of active ingredient to be released into water, T(50), was calculated for the comparison of formulations. The addition of bentonite to the alginate-based formulation produced the higher T(50) values, indicating slower release of the diuron. The mobility of technical and formulated diuron was compared by using soil columns. The use of alginate-based CR formulations containing bentonite produced a less vertical distribution of the active ingredient as compared to the technical product and commercial formulation. Sorption capacities of the various soil constituents for diuron were also determined using batch experiments.

Alginates↗

Superior cell delivery features of poly(ethylene glycol) incorporated alginate, chitosan, and poly-L-lysine microcapsules.

Microencapsulation is an emerging technology in the development of bioartificial organs for drug, protein, and delivery systems. One of the advancements in establishing an appropriate membrane material for live cell and tissue encapsulation is the incorporation of poly(ethylene glycol) (PEG) to the widely studied alginate microcapsules. The current study investigates the properties of integrating PEG to microcapsules coated with poly-L-lysine (PLL) and chitosan as well as a novel microcapsule membrane which combines both PLL and chitosan. Results show that microcapsules containing PEG can support cell viability and protein secretion. The addition of PEG to PLL and chitosan-coated microcapsules improves the stability of microcapsules when exposed to a hypotonic solution. We also compared the novel microcapsule with two other previously used microcapsules including alginate-chitosan-PEG and alginate-PLL-PEG-alginate. Results show that all three membranes are capable of providing immunoprotection to the cells and have the potential for long-term storage at -80 degrees C. The novel membrane containing PEG, chitosan, and PLL, however, revealed the highest cell viability and mechanical strength when exposed to external rotational force, but it was unable to sustain osmotic pressure. The study revealed the potential of using PEG-incorporated alginate, chitosan, and PLL microcapsules for encapsulating live cells producing proteins and hormones for therapy.

Alginates↗

Differential effects of interleukin-1 and transforming growth factor beta on the synthesis of small proteoglycans by rabbit articular chondrocytes cultured in alginate beads as compared to monolayers.

Small proteoglycans (PGs) are supposed to play great roles in the assembly of cartilage matrix but the influence of cytokines and growth factors on their synthesis by articular chondrocytes is largely unknown. We investigated whether IL-1 and TGFbeta1 influence the production of small leucine-rich proteoglycans by chondrocytes cultured in a three-dimensional gel, as compared to the common monolayer system. Rabbit articular chondrocytes were cultured in alginate beads for 14 days or as monolayers for 7 days. The effect of 2 ng/ml IL-1beta or TGFbeta1 during the last two days in culture was determined, after [35S]methionine labeling over the last 24 h. Cell-associated and further-removed matrix compartments were separated by centrifugation after sodium citrate/EDTA treatment of alginate beads whereas medium and cell-layer fractions were isolated from monolayer cultures. Total newly synthesized PGs were first isolated by anion-exchange chromatography and the small PGs were further separated from aggrecans by gel-filtration (Sepharose CL-4B) and analyzed by SDS-polyacrylamide gel electrophoresis (SDS-PAGE). Addition of TGFbeta1 resulted in an overall rise in neosynthesized small PG content in both culture systems. However, TGFbeta1 significantly increased to the same extent the percentage of small PGs laid down in the cell-associated and the further-removed matrix compartments of the beads culture (+60%) whereas it augmented the content of small PGs in the medium (+40%) and reduced that of the cell fraction (-35%) in the monolayer culture. By adding IL-1, the amount of total newly synthesized small PGs was decreased in monolayers while it increased in alginate beads. IL-1 was also shown to change the relative distribution of these molecules in the monolayer system in contrast to the alginate beads culture where the proportions were not significantly altered. Electrophoretic analysis of the 35S-labeled small PGs-containing fractions confirmed these effects at the level of the 45-50 kDa-related core proteins. This study demonstrates that TGFbeta and IL-1 differently influence small PG synthesis of rabbit articular chondrocytes depending on whether they are cultured in alginate beads or in monolayers. Moreover, the regulation of small PG expression appears to be different from that of high-molecular weight aggrecans. As these small molecules are playing major roles in matrix assembly and growth factor regulation, the data may have great relevance to the pathogenesis of osteoarthritis and repair of articular cartilage lesions.

Alginates↗

The bioavailability of magnesium from Wakame (Undaria pinnatifida) and Hijiki (Hijikia fusiforme) and the effect of alginic acid on magnesium utilization of rats.

The bioavailability of magnesium from Wakame and Hijiki, and the effects of alginic acid on absorption of dietary magnesium were examined in five groups of rats fed either control, Wakame, Hijiki, AW (containing the same amount of alginate as in the Wakame) and AH (containing the same amount of alginate as in the Hijiki) diets, and animals fed a low magnesium diet (LMg) (twentieth amount of magnesium in the original mineral mixtures as the control). Food intake and body weight gain were decreased by adding sodium alginate to the diets. A large amount of calcium accumulated only in the kidneys of the rats fed the LMg diet. Serum magnesium concentration decreased only in the LMg group. The magnesium content in the defatted left femurs did not differ between the control and Wakame fed animals and also among the animals eating Wakame, Hijiki and AW diets. The breaking force of the right femurs did not differ among all the groups except the LMg group. The ratio of apparent magnesium absorption (%) of the control, LMg, Wakame, Hijiki, AW and AH groups was 82.2, 72.7, 66.9, 50.8, 69.3 and 54.2 in the first experimental period, and was 75.3, 52.1, 57.7, 46.9, 62.6 and 60.5 in the second experimental period, respectively. It was clear that the bioavailability of magnesium in the Wakame fed rats was higher than in those eating the Hijiki. Large amounts of sodium alginate lowered magnesium absorption from the diet.

Alginates↗

The controlled release of prednisolone using alginate gel.

In a release study of alginate gel beads, swelling and erosion of the beads were observed at pH 6.8, whereas no swelling occurred at pH 1.2. The amount of released prednisolone (PL) was greater at pH 6.8 than at pH 1.2. The lower the ratio of mannuronic acid block to guluronic acid block in alginate, the slower the release of PL. An increase in loaded PL in the beads resulted in a slower release of PL. The decrease in bead size caused a rapid release of PL. The addition of sodium alginate propylene glycol ester elevated the extent of PL release. The plasma profile of PL showed sustained-release behavior after the oral administration of the beads to beagles. Furthermore, the correlation between in vitro release and in vivo absorption of PL for various alginate gel beads was evaluated using deconvolution and convolution methods. The in vivo absorption of PL was correlated with the PL release at pH 1.2, and it differed from that at pH 6.8. The release of PL from alginate gel beads in vivo appeared to occur under conditions that cause little swelling.

Absorption↗

Limitations of alginate gels as a culture model for the study of the effects of UVA radiation on human dermal fibroblasts.

Several studies were undertaken to develop three-dimensional (3-D) cell culture models that allow conditions closer to the in vivo situation. To this end, alginate gels were tested as a 3-D cell culture model that might be useful in the study of the effects of UVA on human dermal fibroblasts. Cell culture in alginate gels and the irradiation conditions were optimized. Results showed that optimized cultures in alginate gels experienced considerable cell death on UVA irradiation compared to the classical monolayer cell culture. Viability tests (cell counting and neutral red assay) were performed to show that only UVA-irradiated alginate gels were responsible for this cytotoxicity. The implication of oxygen species in the phototoxicity induced by ultraviolet light has already been described; for this reason we investigated whether oxygen species were involved in the cytotoxicity induced by alginate upon UVA irradiation. It appeared that superoxide anion is not implicated.

Alginates↗

Purification and properties of an alginate lyase from a marine bacterium.

An unidentified pseudomonad isolated by enrichment procedures from decomposing seaweed was grown in defined medium containing sodium alginate as the sole carbon source. The alginate lyase recovered from disrupted bacterial cells was purified by a procedure of (NH4)2SO4 precipitation, gel filtration and ion-exchange chromatography. From sodium dodecyl sulphate/polyacrylamide-gel-electrophoresis experiments a mol.wt. of about 50 000 was determined. The enzyme was active against both algal and bacterial alginate preparations. Kinetic studies together with analysis of the unsaturated oligouronide products of alginate lyase action indicated the enzyme was specific for guluronic acid-containing regions of the macromolecular substrate. The specificity of the enzyme can be used to give information about the primary composition of alginate samples.

Alginates↗