SEARCH · PubMed Health

Results for “Waste Management”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

PubMed2004

Microbial utilisation of natural organic wastes.

The waste management strategy for the future should meet the benefits of humanity safety, respect principals of planet ecology, and compatibility with other habitability systems. For these purpose the waste management technologies, relevant to application of the biodegradation properties of bacteria are of great value. The biological treatment method is based upon the biodegradation of organic substances by various microorganisms. The advantage of the biodegradation waste management in general: it allows to diminish the volume of organic wastes, the biological hazard of the wastes is controlled, and this system may be compatible with the other systems. The objectives of our study were: to evaluate effectiveness of microbial biodegradation of non-pretreated substrate, to construct phneumoautomatic digester for organic wastes biodegradation, and to study microbial characteristics of active sludge samples used as inoculi in biodegradation experiment. The technology of vegetable wastes treatment was elaborated in IBMP and BMSTU. For this purpose the special unit was created where the degradation process is activated by enforced reinvention of portions of elaborated biogas into digester. This technology allows to save energy normally used for electromechanical agitation and to create optimal environment for anaerobic bacteria growth. The investigations were performed on waste simulator, which imitates physical and chemical content of food wastes calculated basing on the data on food wastes of moderate Russian city. The volume of created experimental sample of digester is 40 l. The basic system elements of device are digesters, gas receiver, remover of drops and valve monitoring and thermal control system. In our testing we used natural food wastes to measure basic parameters and time of biodegradation process. The diminution rate of organic gained 76% from initial mass taking part within 9 days of fermentation. The biogas production achieved 46 l per 1 kg of substrate. The microbial studies of biodegradation process revealed following peculiarities: (i) gradual quantitative increasing of Lactobacillus sp. (from 10(3) to 10(5) colony forming units (CFU) per ml), (ii) activation of Clostridia sp. (from 10(2) to 10(4)CFU/ml), (iii) elimination of aerobic conventional pathogens (Enterobacteriaceae sp., Protea sp., staphylococci). The obtained results allow to evaluate effectiveness of proposed technology and to determine the leading role of lactobacilli and clostridia in process of natural wastes biodegradation. Our further investigations shall further be concentrated on creation of artificial inoculi for launching of food wastes biodegradation. These inoculi will include active and adapted strains of clostridia and lactobacilli.

Bacteria, Aerobic↗

PubMedDate not supplied

Clinical waste generation from renal units: implications and solutions.

The treatment of end-stage renal disease (ESRD) makes extensive use of presterilized disposable items which, after use, are contaminated by blood. The preferred route of disposal of such items is by incineration. Disposal costs have risen and this increase in costs has not been matched by waste management programs in renal units. Many of the waste items generated also contain polyvinyl chloride (PVC) whose incineration is environmentally sensitive. Furthermore blood tubing sets contain plasticizers such as di(2-ethylhexyl) phthalate (DEHP), which is known to pose health risks to specific groups of patients. The generation of clinical waste in a dialysis unit is analyzed, issues associated with disposal are discussed, and approaches toward a cost-effective, environmentally sustainable clinical waste management program are reviewed.

Cost-Benefit Analysis↗

PubMed1992

When siting works, Canada-style.

Hazardous waste management poses increasing problems for Canadian provinces and American states, given the vast quantities and types of wastes generated and the virtual inability to open new storage, treatment, or disposal facilities. The Canadian experience is very similar to the American one in many respects, except for the fact that three provinces (Alberta, Manitoba, and Quebec) have devised alternative approaches to siting that appear successful in moving beyond the political gridlock so common on this issue. In each of these cases, traditional, top-down approaches to siting have been eschewed in favor of a more comprehensive approach that includes extensive public participation, economic and social compensation packages, formal partnerships between public and private organizations, and direct links between siting proposals and other aspects of waste management, including waste reduction, recycling, and export/import control.

Alberta↗

PubMed2004

Advances in encapsulation technologies for the management of mercury-contaminated hazardous wastes.

Although industrial and commercial uses of mercury have been curtailed in recent times, there is a demonstrated need for the development of reliable hazardous waste management techniques because of historic operations that have led to significant contamination and ongoing hazardous waste generation. This study was performed to evaluate whether the U.S. EPA could propose treatment and disposal alternatives to the current land disposal restriction (LDR) treatment standards for mercury. The focus of this article is on the current state of encapsulation technologies that can be used to immobilize elemental mercury, mercury-contaminated debris, and other mercury-contaminated wastes, soils, sediments, or sludges. The range of encapsulation materials used in bench-scale, pilot-scale, and full-scale applications for mercury-contaminated wastes are summarized. Several studies have been completed regarding the application of sulfur polymer stabilization/solidification, chemically bonded phosphate ceramic encapsulation, and polyethylene encapsulation. Other materials reported in the literature as under development for encapsulation use include asphalt, polyester resins, synthetic elastomers, polysiloxane, sol-gels, Dolocrete, and carbon/cement mixtures. The primary objective of these encapsulation methods is to physically immobilize the wastes to prevent contact with leaching agents such as water. However, when used for mercury-contaminated wastes, several of these methods require a pretreatment or stabilization step to chemically fix mercury into a highly insoluble form prior to encapsulation. Performance data is summarized from the testing and evaluation of various encapsulated, mercury-contaminated wastes. Future technology development and research needs are also discussed.

Environmental Pollutants↗

PubMed2005

Environmental and health impacts of household solid waste handling and disposal practices in third world cities: the case of the Accra Metropolitan Area, Ghana.

Inadequate provision of solid waste management facilities in Third World cities results in indiscriminate disposal and unsanitary environments, which threatens the health of urban residents. The study reported here examined household-level waste management and disposal practices in the Accra Metropolitan Area, Ghana. The residents of Accra currently generate large amounts of solid waste, beyond the management capabilities of the existing waste management system. Because the solid waste infrastructure is inadequate, over 80 percent of the population do not have home collection services. Only 13.5 percent of respondents are served with door-to-door collection of solid waste, while the rest dispose of their waste at communal collection points, in open spaces, and in waterways. The majority of households store their waste in open containers and plastic bags in the home. Waste storage in the home is associated with the presence of houseflies in the kitchen (r = .17, p < .0001). The presence of houseflies in the kitchen during cooking is correlated with the incidence of childhood diarrhea (r = .36, p < .0001). Inadequate solid waste facilities result in indiscriminate burning and burying of solid waste. There is an association between waste burning and the incidence of respiratory health symptoms among adults (r = .25, p < .0001) and children (r = .22, p < .05). Poor handling and disposal of waste are major causes of environmental pollution, which creates breeding grounds for pathogenic organisms, and the spread of infectious diseases. Improving access to solid waste collection facilities and services will help achieve sound environmental health in Accra.

Animals↗

PubMed2005

Solid industrial wastes and their management in Asegra (Granada, Spain).

ASEGRA is an industrial area in Granada (Spain) with important waste management problems. In order to properly manage and control waste production in industry, one must know the quantity, type, and composition of industrial wastes, as well as the management practices of the companies involved. In our study, questionnaires were used to collect data regarding methods of waste management used in 170 of the 230 businesses in the area of study. The majority of these companies in ASEGRA are small or medium-size, and belong to the service sector, transport, and distribution. This was naturally a conditioning factor in both the type and management of the wastes generated. It was observed that paper and cardboard, plastic, wood, and metals were the most common types of waste, mainly generated from packaging (49% of the total volume), as well as material used in containers and for wrapping products. Serious problems were observed in the management of these wastes. In most cases they were disposed of by dumping, and very rarely did businesses resort to reuse, recycling or valorization. Smaller companies encountered greater difficulties when it came to effective waste management. The most frequent solution for the disposal of wastes in the area was dumping.

Industrial Waste↗

PubMed1995

Managing infectious waste: guidance for home care.

Infectious waste handling is a major concern for all health care professionals, yet most literature on the subject focuses on the acute care setting. Home care agencies must develop infectious waste protocols that keep in mind federal, state, and local regulations.

Guidelines as Topic↗

PubMed2005

Computer model for municipal solid waste treatment in developing countries.

Many integrated solid waste management (ISWM) models are available but are of little use to developing countries such as India since they do not take into account typical developing countries municipal solid waste characteristics such as high organic content, poor performance of formal sector control and support, high activity of scavengers and waste pickers, etc. The goal of this study is to create a computer program to determine the least cost treatment and disposal system for a given solid waste management problem. To demonstrate its applicability, the model was applied to the Indian city Amritsar. A typical Indian city like Amritsar generates about 500 ton of MSW/d with 45% moisture content, 30% volatile matter, and calorific value of 1500 kcal/kg. The computer model was run for various technologies. Results showthatfor Amritsar city incineration an expenditure of U.S. dollars (USD) 6.62 is incurred, whereas landfilling, composting, and biomethanation digester give an income of USD 0.13, USD 0.20, and USD 0.23 per ton of MSW, respectively. This empirical exercise not only reveals the model's strengths such as highlighting important interdependencies in the waste management sector but also its requirement for quality data.

Bacteria, Anaerobic↗

PubMed2005

What is waste? To whom?--An anthropological perspective on garbage.

What is waste? To whom?--An anthropological perspective on garbage explores the fact that what constitutes waste is a highly subjective notion. In Tacna, Peru, the place from where this article draws its empirical material, waste is not only seen as a risk to public health and the environment. Some find it is a mere aesthetic inconvenience, for others it is the only source of income. Yet another way of perceiving waste is as a social contagion, in which the negative qualities of garbage are transmitted to surrounding people in the eyes of others. Such perceptions of waste, it is argued, are important parts of local waste management systems, and the understanding of such perceptions might increase the effectiveness of waste management campaigns.

Culture↗

PubMed2001

Solid waste treatment as a high-priority and low-cost alternative for greenhouse gas mitigation.

The increased concern about environmental problems caused by inadequate waste management, as well as the concern about global warming, promotes actions toward a sustainable management of the organic fraction of the waste. Landfills, the most common means to dispose of municipal solid waste (MSW), lead to the conversion of the organic waste to biogas, containing about 50% methane, a very active greenhouse gas (GHG). One unit of methane has a global warming potential of 21 computed for a 100-year horizon or 56 computed for 20 years. The waste sector in Israel contributes 13% of total greenhouse gases (GHG) emissions for a time horizon of 100 years (for a time horizon of 20 years, the waste sector contribution equals to more than 25% of total GHG emissions). The ultimate goal is to minimize the amount of methane (CH4) by converting it to CO2. This can be achieved by physicochemical means (e.g., landfill gas flare, incineration) or by biological processes (e.g., composting, anaerobic digestion). Since the waste in Israel has a high organic material content, it was found that the most cost-effective means to treat the degradable organic components is by aerobic composting (investment of less than US$ 10 to reduce emission of one ton CO2 equivalent per year). Another benefit of this technology is the ability to implement it within a short period. The suggested approach, which should be implemented especially in developing countries, could reduce a significant amount of GHG at relatively low cost and short time. The development of a national policy for proper waste treatment can be a significant means to abate GHG emissions in the short term, enabling a gain in time to develop other means for the long run. In addition, the use of CO2 quotas will credit the waste sector and will promote profitable proper waste management.

Biodegradation, Environmental↗

PubMed2001

Compilation and evaluation of a Paso del Norte emission inventory.

Emission inventories of ozone precursors are routinely used as input to comprehensive photochemical air quality models. Photochemical model performance and the development of effective control strategies rely on the accuracy and representativeness of an underlying emission inventory. This paper describes the tasks undertaken to compile and evaluate an ozone precursor emission inventory for the El Paso/Ciudad Juárez/Southern Doña Ana region. Point, area and mobile source emission data were obtained from local government agencies and were spatially and temporally allocated to a gridded domain using region-specific demographic and land-cover information. The inventory was then processed using the US Environmental Protection Agency (EPA) recommended Emissions Preprocessor System 2.0 (UAM-EPS 2.0) which generates emissions files compatible with the Urban Airshed Model (UAM). A top down evaluation of the emission inventory was performed to examine how well the inventory represented ambient pollutant compositions. The top-down evaluation methodology employed in this study compares emission inventory ratios of non-methane hydrocarbon (NMHC)/nitrogen oxide (NOx) and carbon monoxide (CO)/NOx ratios to corresponding ambient ratios. Detailed NMHC species comparisons were made in order to investigate the relative composition of individual hydrocarbon species in the emission inventory and in the ambient data. The emission inventory compiled during this effort has since been used to model ozone in the Paso del Norte airshed (Emery et al., CAMx modeling of ozone and carbon monoxide in the Paso del Norte airshed. In: Proc of Ninety-Third Annual Meeting of Air & Waste Management Association, 18-22 June 2000, Air & Waste Management Association, Pittsburgh, PA, 2000).

Databases, Factual↗

PubMed2003

The tribal environment: solid waste in Indian country.

The issue of solid waste management in Indian country is multidimensional in scope because it affects more than just regulatory concerns. There are more than 550 federally recognized Alaska Native and American Indian Tribes in the United States. Tribes are sovereign nations that have a special relationship to the federal government and a unique legal status. The environmental problems faced by tribes are many, and it is only fair that tribes, as sovereigns, specify the levels of protection on their lands. The one-size-fits-all regulatory approach to environmental problems and solid waste management in particular does not work and often leads to conflict between tribes and the federal and state governments. Inherent tensions also exist between tribes and various levels of government concerning jurisdiction of lands and managing solid waste. These intergovernmental relationships are often complex and present unique challenges to all. More research needs to be done on targeting resources to meet the capacity-building needs of tribes, as well as the overall environmental management needs of Indian country under the federal trust obligation. Successful intergovernmental relationships can be fostered through partnership arrangements between tribes and federal, state, and local governments. In the area of solid waste such partnerships have worked. It requires that all levels of government deal with tribes with careful consideration of their cultural, historic, and socioeconomic aspects, which are often intertwined.

Alaska↗

PubMed2000

Radioactive waste minimization implications of clinically-indicated exsanguination procedures.

Exsanguination is a method of animal euthanasia approved for use in specific circumstances. Animals undergoing exsanguination are fully anesthetized, and the blood is removed resulting in hypovolemia. In situations where radioactive materials are used as part of a research protocol that remain predominantly suspended in the blood, the exsanguination procedure can result in a significant lowering of residual radioactivity content. This reduction can greatly affect the types of waste management and minimization options that can be subsequently applied. In this study, data were collected from 20 rabbits injected with approximately 29.6 MBq (0.8 mCi) of tritiated thymidine as part of a percutaneous transluminal carotid artery angioplasty study. Residual concentrations of radioactivity were consistently reduced by an average of 88%. The reduction was very significant in this instance, since the residual activities were below the established exemption limit of 1.85 kBq g(-1) (0.05 microCi g(-1)) for disposal of these wastes as non-radioactive. Although the exsanguination procedure can result in significant waste minimization opportunities in certain circumstances, this should not be the rationale for its use. Rather, the method of euthanasia should be based exclusively on sound animal care and use principles, and waste management strategies should then be made following that decision. Health Phys. 79(3):291-293; 2000 Key words: waste, low-level; waste management; radiation protection; blood

Animals↗

PubMed1991

Garbage wars '91. Report from the front. Part three.

This final installment in Food Management's three-part series on solid waste management highlights the effective strategies independent foodservice operators and contract companies are employing to promote recycling and waste reduction and to educate customers and employees about responsible waste management.

Environmental Pollution↗

PubMed2026

Exploring perceptions and willingness to recycle wastes among small businesses in selected townships of the Gauteng province in South Africa.

Although small businesses play an important role in generating employment opportunities and local economic development, their involvement in recycling programs has not been characterized in greater detail. This study explored the perceptions and willingness of selected small businesses in Gauteng province townships to reuse or recycle some of their waste materials. This study used a quantitative research approach to explore the perceptions and willingness of selected small businesses to reuse or recycle some of the waste they generate. The results showed that the perceptions about the contribution of recycling to environmental pollution reduction among small businesses in the study differed significantly across the townships (χ2 = 6.892, p = 0.003). On the other hand, most formal businesses significantly agreed with the potential benefits of waste recycling on environmental pollution reduction (χ2 = 16.118, p = 0.003), saving landfill space (χ2 = 11.610, p = 0.003), improving environmental quality (χ2 = 10.443, p = 0.005), and providing job opportunities (χ2 = 10.263, p = 0.036). However, regardless of their formality (χ2 = 2.957, p = 0.228) or location (χ2 = 9.463, p = 0.051), there was no statistically significant variation in the recycling practices of the small businesses in this study. Moreover, businesses' willingness to use recycling facilities if they were located nearby differed across townships (0.05 > p = 0.010) but was similar despite the formality of the enterprises. In conclusion, recycling perceptions and willingness of small businesses can vary significantly depending on whether they are formal or informal and across townships. As a result, relevant educational interventions should be uniquely developed to raise awareness about the need for waste minimization through recovery, re-use, and recycling among small businesses in the Gauteng province.Implications: Small, Medium, and Micro enterprises (SMMEs) play a crucial role in local economic development in South Africa. However, research on their environmental sustainability is scarce, despite their significant impacts on natural resources and contributions to pollution. Most waste management studies have focused on households and municipalities, leaving a gap in understanding SMMEs' waste management behaviors, particularly in townships.

South Africa↗

PubMed2006

[Ecoefficiency: a tool to reduce solid waste production and waste of materials in health care units].

The main goal of health care units is patient care. During this process, water, energy, and different materials are used, generating liquid effluents and solid waste that require adequate treatment. Although medical waste management demands increasing attention by health care units, reduction in the generation of medical solid waste has still not been set as a priority. Using ecoefficiency techniques, it is possible to demonstrate whether a company is meeting it standards for quality, procedures, environmental control, and economic efficiency. Therefore, ecoefficient companies realize both economic and environmental benefits through progressive reduction in solid waste, liquid effluents, and air emissions. This new concept requires further dissemination among health care units, since many are making efforts to improve quality of services, but still overlook the issue of waste and generate an increasing amount of solid waste. This leads not only to waste of raw materials but also additional costs for proper waste management.

Efficiency, Organizational↗

PubMed2000

Food safety knowledge and practices of streetfood vendors in a Philippines university campus.

A survey on food safety knowledge and practices of streetfood vendors from a representative urban university campus in Quezon City, Philippines was done. A face-to-face interview was conducted using a standardized survey tool containing 70 questions, which included queries on demographics and food safety knowledge and practices of streetfood vendors. Topics on food safety assessment in both practices and knowledge included: health and personal hygiene, good manufacturing procedures, food contamination, waste management, and food legislation. The study found that among the 54 streetfood vendors surveyed, knowledge on food safety concepts was established particularly on topics that dealt with health and personal hygiene, food contamination and good manufacturing procedures. However, vendors were shown to be not too knowledgeable in terms of food legislation and waste management. A significant gap between knowledge and practice on these topics was established and it was primarily attributed to the tendencies of street food vendors to compromise food safety for financial issues. Confusion in food legislation was established in this test microcosm because the purveyor of food safety regulations was not the local government health unit but the business concession office of the campus administration. The provision of continuous food safety education, some financial assistance through social services affiliations, and basic water and waste management utilities were recommended to diminish the gap between knowledge and practices of safe streetfood vending in school campuses.

Adult↗

PubMed2005

Optimal design for sustainable development of a material recovery facility in a fast-growing urban setting.

Installing material recovery facilities (MRFs) in a solid waste management system could be a feasible alternative to achieve sustainable development goals in urban areas if current household and curbside recycling cannot prove successful in the long run. This paper addresses the optimal site selection and capacity planning for a MRF in conjunction with an optimal shipping strategy of solid waste streams in a multi-district urban region. Screening of material recovery and disposal capacity alternatives can be achieved in terms of economic feasibility, technology limitation, recycling potential, and site availability. The optimization objectives include economic impacts characterized by recycling income and cost components for waste management, while the constraint set consists of mass balance, capacity limitation, recycling limitation, scale economy, conditionality, and relevant screening constraints. A case study for the City of San Antonio, Texas (USA) presents a vivid example where scenario planning demonstrates the robustness and flexibility of this modeling analysis. It proves especially useful when determining MRF ownership structure. Each scenario experiences two case settings: (1) two MRF sites are proposed for selection and (2) a single MRF site is sought. Cost analysis confirms processing fees are not the driving force in the City's operation, but rather shipping cost. Sensitivity analysis solidifies the notion that significant public participation plays the most important role in minimizing solid waste management expenses.

Cities↗