PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “NITRIC ACID”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources

Cadmium analysis in soil by microwave acid digestion and graphite furnace atomic absorption spectrometry.

The need to determine micronutrients and toxic elements in soils has grown in recent years and cadmium is of special interest. A method has been developed for the determination of cadmium in soils based on a prior acid digestion of the samples with nitric acid in closed Teflon vessels, into a microwave over. The cadmium determination was carried out by graphite furnace atomic absorption spectrometry (GFAAS) with L'vov platform. Optimum operating conditions, analyte modifiers and matrix interferences have been investigated. The best matrix modifier was found to be ammonium dihydrogen phosphate. The interferences are greatly reduced under these operating conditions and calibration can be performed with simple aqueous solutions of the metal standard. The method is rapid and provides accurate and precise results that agree with certified values for two reference materials: BCR 141 (calcareous loam soil) and BCR 277 (estuarine sediment).

Journal Article↗

The effect of simulated acid rain on the biochemical composition of Scots pine (Pinus sylvestris L.) needles.

The effects of prolonged simulated acid rain on the biochemistry of Scots pine needles were studied in Finnish Lapland. Pine trees were exposed by spraying the foliage and soil with either clean water or simulated acid rain (SAR; both sulphuric and nitric acids) over the period 1985-1991. The concentrations of carbohydrates (starch, glucose, fructose, sucrose) in one-year-old pine needles were not affected by SAR-treatments. The SAR-treatments did not have significant effects on protein bound amino acids, which was true also for most of the free amino acids. However, the citrulline concentration was over three-fold greater in the foliage of pines exposed to SAR of pH 3 compared to irrigated controls. The concentrations of total phenolics, individual low molecular weight phenolics and soluble proanthocyanidins were not affected by the treatments, but insoluble proanthocyanidins had increased in acid-treated trees. Some of the studied biochemical compounds showed significant differences between two sub-areas (similar treatments) only 120 m apart.

Journal Article↗

Improved and selective platinum recovery from spent alpha-alumina supported catalysts using pretreated anionic ion exchange resin.

Improved and selective recovery of platinum from a spent dehydrogenation platinum alpha-alumina supported catalyst using a strong basic ion exchange resin is reported. Platinum and other precious metal group (PMG) complexes are leached using concentrated hydrochloric acid along with about 0.20 vol.% nitric acid as an oxidizing agent from de-coked and crushed spent catalyst. Effects of hydrochloric acid concentration, time, and temperature in leaching stage are investigated. The strong basic anionic resin is treated by sodium hydroxide solution to replace chloride anion by hydroxyl group ion. The supernatant of the leaching process is passed through a fixed column of hydroxylated strong base anionic resin. The treated resin on which the platinum complex is adsorbed is dried and burned in an oxidizing atmosphere at 750-800 degrees C. The recovered gray metallic powder is mainly platinum. Results compared with those obtained from untreated anionic resin show that adsorption of platinum complexes onto the treated anionic resin is more selective and the yield of separation is considerably improved. The breakthrough curves of the pretreated anion exchanger and that of untreated exchange resin reveals that the capacity of the hyroxilated resin is decreased by about 14%. These breakthrough curves can be used for calculation of height of a practical exchange plate (HPEP) for design purposes.

Aluminum Oxide↗

15N CIDNP study of formation and decay of peroxynitric acid: evidence for formation of hydroxyl radicals.

The reaction of nitrous acid with hydrogen peroxide leads to nitric acid as the only stable product. In the course of this reaction, peroxynitrous acid (ONOOH) and, in the presence of CO(2), a peroxynitrite-CO(2) adduct (ONOOCO(2)(-)) are intermediately formed. Both intermediates decompose to yield highly oxidizing radicals, which subsequently react with excess hydrogen peroxide to yield peroxynitric acid (O(2)NOOH) as a further intermediate. During these reactions, (15)N chemically induced dynamic nuclear polarization (CIDNP) effects are observed, the analysis of the pH dependency of which allows the elucidation of mechanistic details. The formation and decay of peroxynitric acid via free radicals NO(2)(*) and HOO(*) is demonstrated by the appearance of (15)N CIDNP leading to emission (E) in the (15)N NMR signal of O(2)NOOH during its formation and to enhanced absorption (A) during its decay reaction. Additionally, the (15)N NMR signal of the nitrate ion (NO(3)(-)) appears in emission at pH approximately 4.5. These observations are explained by proposing the intermediate formation of short-lived radical anions O(2)NOOH(*)(-) probably generated by electron transfer between peroxynitric acid and peroxynitrate anion, followed by decomposition of O(2)NOOH(*)(-) into NO(3)(-) and HO(*) and NO(2)(-) and HOO(*) radicals, respectively. The feasibility of such reactions is supported by quantum-chemical calculations at the CBS-Q level of theory including PCM solvation model corrections for aqueous solution. The release of free HO(*) radicals during decomposition of O(2)NOOH is supported by (13)C and (1)H NMR product studies of the reaction of preformed peroxynitric acid with [(13)C(2)]DMSO (to yield the typical "HO(*) products" methanesulfonic acid, methanol, and nitromethane) and by ESR spectroscopic detection of the HO(*) and CH(3)(*) radical adducts to the spin trap compound POBN in the absence and presence of isotopically labeled DMSO, respectively.

Journal Article↗

Effective one-dimensional dipole moment function for the OH stretching overtone spectra of simple acids and alcohols.

To gain insight on the absorption intensities, as well as the direction of the transition moment for the OH stretching vibration in alcohols and acids, we performed detailed analyses for nitric acid, acetic acid, methanol, tert-butyl alcohol, water, and OH radical. We obtained both the potential energy surface and the dipole moment function (DMF) by the B3LYP method and performed quantum mechanical vibrational calculation using the grid variational method based on the local mode model. In this work, we employed the sum rule of the absorption intensities for the one-dimensional (1-D) vibrational Hamiltonian to construct an effective 1-D DMF, which is responsible for the total sum of the overtone intensities. The direction of this effective DMF was found to be tilted away from the OH bond by about 30 degrees for the polyatomic molecules. The nonlinearity of the DMFs in the directions parallel and perpendicular to the OH bond is discussed to rationalize the tilting. Furthermore, we analyzed the effective 1-D DMFs with the vibrational wave function expansion method and derived the effective portion of the 1-D DMF that is responsible for the overtone transition moment.

Journal Article↗

Permanganate-based chemiluminescence analysis of ferulic acid using flow injection.

A simple, sensitive and rapid flow-injection chemiluminescence method has been developed for the determination of ferulic acid based on the chemiluminescence reaction of ferulic acid with potassium permanganate in a nitric acid medium. A strong chemiluminescence signal was observed when ferulic acid was injected into an acidic potassium permanganate solution in a flow-cell. The present method allowed the determination of ferulic acid in the concentration range of 6.0 x 10(-6) to 2.0 x 10(-4) mol l(-1); the detection limit (3sigma) for ferulic acid was 9.6 x 10(-8) mol l(-1). The relative standard deviation was 1.0% for 11 replicate analyses of 2.0 x 10(-4) mol l(-1) ferulic acid. The proposed method was applied to the determination of ferulic acid in real samples with satisfactory results. Moreover, the reaction mechanism of the chemiluminescence system was primarily considered.

Coumaric Acids↗

Dry ash-voltammetric determination of cadmium, cooper, lead, and zinc in foods.

An analytical method is presented for determining cadmium, copper, and lead by differential pulse anodic stripping voltammetry and zinc by cathodic scan differential pulse voltammetry. Food samples are dry ashed using a sulfuric acid ashing aid, dissolved in dilute nitric acid, buffered at pH approximately 4.3 with an acetate buffer, and quantitatively analyzed using the technique of standard additions at a hanging mercury drop electrode. The quantitation limits (5 times the estimated detection limits) are approximately 5 ng/g for Cd, Cu, and Pb, and 50 ng/g for Zn. Accuracy of the method is established by (a) analysis of NBS Standard Reference Material No. 1577 Bovine Liver, (b) comparison of results obtained by the method described with those obtained by independent analytical methods, and (c) quantitative recovery of analyte metals from fortified, noncanned food samples. Results from an interlaboratory method trial indicate that the method is suitable for the analysis of a variety of food types.

Cadmium↗

Colorimetric determination of selenium in mineral premixes .

A method is described for determination of sodium selenite or sodium selenate in mineral-based premixes. It is based on the formation of intense-yellow piazselenol by Se(IV) and 3,3'-diaminobenzidine. Mineral premixes typically contain calcium carbonate as a base material and magnesium carbonate, silicon dioxide, and iron(III) oxide as minor components or additives. In this method, the premix is digested briefly in nitric acid, diluted with water, and filtered to remove any Iron(III) oxide. Ethylenediaminetetraacetic acid and HCl are added to the filtrate, which is heated to near boiling for 1 h to convert any selenate to selenite. After heating, the solution is buffered between pH 2 and 3 with NaOH and formic acid and treated with NH2OH and EDTA; any Se present forms a complex with 3,3'-diaminobenzidine at 60 degrees C. The solution is made basic with NH4OH, and the piazselenol is extracted into toluene. The absorbance of the complex in dried toluene is measured at 420 nm. The method was validated independently by 2 laboratories. Samples analyzed included calcium carbonate fortified with 100, 200, and 300 micrograms Se in the form of sodium selenite or sodium selenate, a calcium carbonate premix containing sodium selenite, a calcium carbonate premix containing sodium selenate, and a commercial premix; 5 replicates of each sample type were analyzed by each laboratory. Average recoveries ranged from 89 to 109% with coefficients of variation from 1.2 to 13.6%.

3,3'-Diaminobenzidine↗

Chemical composition of Litomosoides carinii microfilarial sheaths.

Litomosoides carinii microfilariae were exsheathed by freezing and thawing, and the sheaths were separated by filtration. Samples of pure sheaths thus obtained were hydrolyzed, methanolyzed or oxidized with nitric acid under pressure at 300 degrees C, respectively, and were analyzed for amino acids, sugars, fatty acids or for metal ions and phosphorus. Almost 75% of the sheath dry weight could thus be accounted for. Amino acids (55 weight %) were the major constituents, and amongst these glutamine and proline (approximately 11% each). The detection of 2% cysteine/cystine indicated the possible presence of disulfide crosslinks. Besides amino acids, approximately 8% of sugars--roughly equimolar amounts of (N-acetyl)galactosamine and uronic acids--1.5% of monovalent cations (Na+ and K+) and 9.5% of phosphate were detected. No appreciable amounts of fatty acids, neutral sugars, neuraminic acid, or (N-acetyl)glucosamine (i.e. no chitin) were found.

Amino Acids↗

Modulation by endogenous nitric oxide of acid secretion induced by gastric distention in rats: enhancement by nitric oxide synthase inhibitor.

The mechanism underlying acid hypersecretion induced by gastric distention was investigated in rats, especially in relation to endogenous nitric oxide (NO). Under urethane anesthesia, rat stomach was distended by instillation of saline (1-10 ml) through the acute fistula that was provided through a pylorus. Gastric samples were collected every 1 h, and the acid secretion was measured by titration with 100 mM NaOH. Gastric acid secretion was increased by distention, and the degree of stimulation was dependent on the volume of saline instillation; a maximal response occurred with 6-ml instillation, which maintained the intraluminal pressure of about 20 cm H(2)O. The increased acid secretory response induced by distention was completely blocked by omeprazole and significantly mitigated by vagotomy, sensory deafferentation, atropine, or famotidine but markedly enhanced by the NO synthase inhibitor N(G)-nitro-L-arginine methyl ester (L-NAME). On the other hand, the enhanced acid response in the presence of L-NAME occurred in an L-arginine-sensitive manner and was almost totally abolished by vagotomy and sensory deafferentation as well as by atropine. Gastric distention increased the release of NO metabolites and histamine into the gastric lumen. The NO metabolite release in the distended stomach was significantly decreased by vagotomy or L-NAME, whereas the histamine output was decreased by vagotomy but increased by L-NAME in an L-arginine-sensitive manner, respectively. These results suggest that 1) gastric distention increases acid secretion, initially through the perception by sensory neurons of the mechanical stimulation and mainly through the efferent vagocholinergic pathway, with the process being modified by endogenous NO, and 2) this molecule, released in a vagal-dependent manner, exerts a negative influence on acid secretion, at least in part by suppressing histamine release from the histamine-containing cells.

Animals↗

Renal regulation of acid-base equilibrium during chronic administration of mineral acid.

Previous studies in metabolic alkalosis have demonstrated that two factors are the prime determinants of acid excretion and bicarbonate reabsorption; first, the diversion to distal exchange sites of sodium previously reabsorbed in the proximal tubule and loop of Henle; and, second, a stimulus to sodium-cation exchange greater than that produced by a low-salt diet alone. In the present study we have examined the hypothesis that these two factors are also the prime determinants of acid excretion during the administration of mineral acid loads. To test this hypothesis, we have administered to dogs ingesting a low NaCl diet a daily dose of 7 meq/kg of H+ with anions (chloride, sulfate, or nitrate) whose differing degrees of reabsorbability influence the speed and completeness with which each is delivered to the distal nephron with its accompanying Na+. After 2-3 wk of acid administration, and after an initial urinary loss of Na+ and K+, the steady-state value for plasma [HCO3-] was 8.6 meq/liter below control in the HCl group, 3.7 meq/liter below control in the H2SO4 group, and unchanged from control in the HNO3 group; all of these values were significantly different from each other. We would propose the following explanation for our findings: when HCl is administered chronically, marked acidosis occurs because distal delivery of Cl- is restricted by the ease with which the Cl- can be reabsorbed in the proximal portions of the nephron. Only when Cl- retention produces sufficient hyperchloremia to insure delivery of Na+ (previously reabsorbed in proximal tubule and loop of Henle) to the distal nephron in quantities equal to ingested Cl is this primary constraint removed. In the case of sulfuric and nitric acids, there is no constraint on distal delivery, the nonreabsorbability of the administered anion causing prompt, total delivery of Na+ to exchange sites in quantities equal to administered hydrogen. Thus, with H2SO4 and HNO3 the sole constraint on removal of the acid load is the inability of the distal exchange mechanism to conserve the Na+ increment fully by means of H+ exchange. Escape of Na+ and K+ into the urine and the resulting stimulus to Na(+)-H+ exchange remove this constraint and are responsible for establishment of a new steady-state of acid-base equilibrium at plasma [HCO3-] levels significantly higher than those seen with HCl. The feeding of HCl in the presence of a normal salt intake led to a degree of metabolic acidosis not significantly different from that seen in dogs ingesting a low-salt diet. We suggest that the presence of dietary sodium at distal exchange sites did not enhance acid excretion because it is only after a loss of body sodium stores that sodium avidity is increased sufficiently to allow full removal of the acid load. The present findings indicate that the fundamental factors controlling acid excretion and bicarbonate reabsorption in metabolic acidosis are closely similar to those operative in metabolic alkalosis.

Acid-Base Equilibrium↗

Nitrogen adsorption characterization of aligned multiwalled carbon nanotubes and their acid modification.

Aligned multiwalled carbon nanotube (CNT) arrays were synthesized by using an iron-based sol-gel catalyst and acetylene as the precursor. These CNTs show high purity, uniform diameters and pore-wall thickness. Low temperature nitrogen adsorption was employed to characterize the structural and surface properties of the as-synthesized sample and that modified with boiling concentrated nitric acid. The adsorption characteristics of the as-synthesized and modified CNTs were thoroughly investigated. High-resolution comparative alpha(s)-plot showed that the nitrogen adsorption on CNTs takes place via a multistage mechanism closely related to their structures. It was also found that the acid modification significantly increased the adsorption energy and enhanced the adsorption capacity under low pressures. High-resolution comparative method provided valuable insights about the surface and pore structures of CNTs.

Adsorption↗

Adsorption of benzene and toluene from aqueous solutions onto activated carbon and its acid and heat treated forms: influence of surface chemistry on adsorption.

The influence of surface chemistry and solution pH on the adsorption of benzene and toluene on activated carbon and its acid and heat treated forms were studied. A commercial coal-based activated carbon F-400 was chosen as carbon parent. The carbon samples were obtained by modification of F-400 by means of chemical treatment with HNO3 and thermal treatment under nitrogen flow. The treatment with nitric acid caused the introduction of a significant number of oxygenated acidic surface groups onto the carbon surface, while the heat treatment increases the basicity of carbon. The pore characteristics were not significantly changed after these modifications. The dispersive interactions are the most important factor in this adsorption process. Activated carbon with low oxygenated acidic surface groups (F-400Tox) has the best adsorption capacity.

Adsorption↗

High-throughput method development approaches for bioanalytical mass spectrometry.

A rational approach to the development and optimization of solid-phase extraction (SPE) methods is described. The semiautomated scheme allows for the simultaneous testing of multiple chemistries using a custom multiple-sorbent 96-well method development plate. Optimized extraction conditions for up to five analytes are determined in a single 2.5-h experiment. The experiment can be tailored to determine SPE conditions (including wash protocols) for related analytes. Data obtained by liquid chromatography-atmospheric pressure ionization-mass spectrometry allows the quantitation of absolute recovery and selection of the best extraction conditions for approximately 100 analytes of diverse structure. Optimized extraction protocols yielding at least 80% recovery are determined for 81% of the analytes. For 96% of the analytes screened, extraction conditions resulting in recoveries of > or = 60% are determined. The most generic set of SPE conditions consist of either C8 or C18 sorbent with an eluent composition of acetonitrile with 5mM nitric acid added.

Acetonitriles↗

Leaching efficiency of copper from industrial sludge with traditional acid extraction (TAE) and microwave assisted treatment (MAT).

In this study various leaching technologies were applied to extract heavy metals from sludge from the printed circuit board process. These methods included traditional acid extraction (TAE) and microwave assisted treatment (MAT). The target heavy metal was copper. Experiments were performed to determine the acid the leaching efficiency by changing operating conditions, including acid type and concentration, leaching time, microwave power, and solid to liquid ratio (S/L). The TAE method demonstrated that copper leaching from a sludge of fine particle sizes (d < 150 microm) was 74% efficient at an S/L of 1/6, a leaching time of 18 hr, using nitric acid in the leaching solution. Then, when the microwave powers were 800 W and 400 W; the leaching time was 30 mins, and the coarse particle size (d < 9.5 mm) was by 1 N sulfuric acid, the copper leaching effects were 93% and 77%, respectively. The MAT procedure reduced the leaching time and improved the leaching efficiency above that obtained by TAE.

Copper↗

A new microwave acid digestion bomb method for the determination of total fluorine.

A new microwave acid digestion method for total fluorine analysis was compared to the reliable reverse-extraction technique. The commercially available Parr bombs which are compatible with microwave heating were modified for this purpose. The Mann-Whitney statistical test did not show any significant differences (p > 0.05) in the determinations of total fluorine in various samples between the two above-mentioned methods. The microwave method also gave high fluorine recoveries (> 97%) when fluoride was added to different samples. The great advantage of the microwave acid digestion bomb method is that the digestion under pressure is so aggressive that only a few minutes is needed for complete digestion (also of covalently bonded fluorine), which reduces the time for fluorine analysis dramatically, while no loss of fluorine or contamination from extraneous sources could take place during the ashing procedure. The digestion solution was made up of 300 microliter of concentrated nitric acid plus 537 microliter of water. After digestion 675 microliter of approximately 8.5 M sodium hydroxide plus 643 microliter of citrate/TISAB buffer was added resulting in an alkaline solution (pH approximately 12) which was finally adjusted to a pH of approximately 5.3 for fluoride determination.

Acids↗

Histopathologic and electron microscopic studies of the effects of Solcoderm on normal epidermis and superficial cutaneous tumors.

Histologic and electron microscopic studies of Solcoderm-treated normal skin and human lesions were performed to help elucidate the mode of action of this new agent. Its fixative properties were readily demonstrated and generally proved to be adequate for histological diagnosis from the post-treatment scab. The degree of preservation of fine intracellular structures was particularly remarkable, since similar treatment with equivalent strengths of nitric acid alone destroys these substructures. Dermal lipids and collagen were found to be natural barriers against the penetration of Solcoderm applied to the skin surface. Mild mechanical disruption and the disturbed cellular continuity of pathologic tissue allows the solution to penetrate treated lesions more freely and enhances the likelihood of their complete destruction when an appropriate quantity of solution is properly delivered by an experienced therapist.

Acetates↗

Factors associated with shear bond strength of composite resin to human enamel.

The preparation of enamel surfaces before etching by removing 0.5 mm of surface tooth structure is common-place in modern restorative dentistry. This study was designed to measure and compare the shear bond strength of composite resin bonded to prepared and unprepared enamel using various proprietary bonding systems. The analysed results failed to show significant differences between the shear bond strengths of the prepared and unprepared enamel specimens. Conditioning enamel surfaces for 60 seconds using 2.5% nitric acid where the solution was allowed to desiccate, resulted in significantly lower bond strengths compared to the other regimes. A correlation of the etchant pH with the mean shear bond strength of the adhesive systems to enamel was observed. The surface topography of the etched enamel surfaces correlated moderately well with the bond strengths obtained.

Acid Etching, Dental↗