PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “WASTES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources

Nutritive value of potato processing wastes in total mixed rations for dairy cattle.

The nutritive value of wet potato processing waste for dairy cattle was determined in two experiments. In Experiment 1, rations contained, on a dry matter basis, 0, 10, 15, and 20% potato waste and were substituted for high moisture corn in diets for 32 lactating Holstein cows for 12 wk. Substituting potato waste for corn did not significantly affect milk yield, milk composition, milk production persistency, or dry matter intake. Cows fed 20% potato waste tended to decrease in milk fat percent and to shift molar proportions of rumen volatile fatty acids toward a decrease in acetate: propionate ratio. In Experiment 2, six steers were used in a 3 X 3 Latin square design to test digestibility and nitrogen utilization of potato waste substituted for high moisture corn at 0, 10, and 20% of the ration dry matter. A second group of four steers with rumen fistulas were used in a 4 X 4 Latin square to test rumen fermentation parameters. Diets contained 0, 10, 20, and 30% potato wastes and were similar to Experiment 1. Potato waste did not significantly affect digestibility of crude protein or dry matter, but at 20% substitution digestibility of acid detergent fiber decreased. Rumen ammonia, acetate, acetate to propionate ratios, and total volatile fatty acids were lower at high intakes of potato waste and pH was increased. The shift in rumen fermentation when large amounts of potatoes were fed explains the depressed butter fat on these rations.

Animal Feed↗

Impact of animal waste application on runoff water quality in field experimental plots.

Animal waste from dairy and poultry operations is an economical and commonly used fertilizer in the state of Louisiana. The application of animal waste to pasture lands not only is a source of fertilizer, but also allows for a convenient method of waste disposal. The disposal of animal wastes on land is a potential nonpoint source of water degradation. Water degradation and human health is a major concern when considering the disposal of large quantities of animal waste. The objective of this research was to determine the effect of animal waste application on biological (fecal coliform, Enterobacter spp. and Escherichia coli) and physical/chemical (temperature, pH, nitrate nitrogen, ammonia nitrogen, phosphate, copper, zinc, and sulfate) characteristics of runoff water in experimental plots. The effects of the application of animal waste have been evaluated by utilizing experimental plots and simulated rainfall events. Samples of runoff water were collected and analyzed for fecal coliforms. Fecal coliforms isolated from these samples were identified to the species level. Chemical analysis was performed following standard test protocols. An analysis of temperature, ammonia nitrogen, nitrate nitrogen, iron, copper, phosphate, potassium, sulfate, zinc and bacterial levels was performed following standard test protocols as presented in Standard Methods for the Examination of Water and Wastewater [1]. In the experimental plots, less time was required in the tilled broiler litter plots for the measured chemicals to decrease below the initial pre-treatment levels. A decrease of over 50% was noted between the first and second rainfall events for sulfate levels. This decrease was seen after only four simulated rainfall events in tilled broiler litter plots whereas broiler litter plots required eight simulated rainfall events to show this same type of reduction. A reverse trend was seen in the broiler litter plots and the tilled broiler plots for potassium. Bacteria numbers present after the simulated rainfall events were above 200/100 ml of sample water. It can be concluded that: 1) non-point source pollution has a significant effect on bacterial and nutrients levels in runoff water and in water resources; 2) land application of animal waste for soil fertilization makes a significant contribution to water pollution; 3) the use of tilling can significantly reduce the amount of nutrients available in runoff water.

Agriculture↗

Prevalence of Escherichia coli O157:H7 bacterial infections associated with the use of animal wastes in Louisiana for the period 1996-2004.

Animal waste from dairy and poultry operations is an economical and commonly used fertilizer in the state of Louisiana. The application of animal waste to pasture lands not only is a source of fertilizer, but also allows for a convenient method of waste disposal. The disposal of animal wastes on land is a potential non-point source of water degradation. Human health is a major concern when considering the disposal of large quantities of animal waste. Health concerns could exist from exposure to pathogens and excess nitrogen associated with this form of pollution. The objective of this study was to collect and analyze health data related to Escherichia coli O157:H7 bacterial infections associated with the use of animal waste in Louisiana for the years 1996-2004. An analysis of adverse health effects associated with the use of animal waste in Louisiana was conducted based on the incidence/prevalence rate for the studied years. The number of reported cases increased during the summer months. Analysis of health data of the studied years showed that the number of reported disease cases of E. coli O157:H7 were highest among Caucasian infants in the 0-4 year old age category and in Caucasian children in the 5-9 year old age category. Although the number of cases declined with age, a slight increase in rates was seen among the elderly population. While the rate of reported cases per 100,000 people remained the same for the years of 1999 and 2000, the rate decreased by 60% from the year 2000 to 2001. A slight decline of the number of cases that was also reported for the years 2002 and 2003. The high rate of identification in the younger population may result from the prompt seeking of medical care when symptoms become evident among infants and young children as well as the frequent ordering of stool examination when symptoms become evident in this population group. It was also noted that areas that had a higher number of reported cases also had a greater number of physicians per 100,000 people within the parish. The association with increasing age could be attributed to declining health and weaker immune systems often found among the older population. It was concluded that although some of the studied parishes surveyed had large amounts of animal waste generated each year, statistics did not show a correlation with Escherichia coli O157:H7 bacterial infections.

Adolescent↗

Anaerobic digestion of solid waste: state-of-the-art.

In order to make a correct assessment of the state-of-the-art of the technology, a study was made on the development of digestion capacity for solid waste in Europe. The study was limited to plants in operation or under construction that were treating at least 10% organic solid waste coming from market waste or municipal solid waste. A total treatment capacity for solid waste organics, excluding the tonnage used for sewage sludge and manures, evolved from 122,000 ton per year in 1990 to 1,037,000 ton available or under construction by the year 2000 in 53 plants across Europe, an increase by 750%. Both mesophilic and thermophilic technologies have been proven, with about 62% of capacity being operated at mesophilic temperatures. Wet and dry digestion are almost evenly split, while a clear choice was made for one-phase systems instead of two-phase systems, which represent only 10.6% of capacity. The capacity provided by co-digestion systems is limited, while there is a rising interest in digestion of mixed household waste. The reliable performance has been demonstrated for all types of anaerobic digestion systems. On the basis of the Dranco technology, a single-phase thermophilic dry digestion process, performances were reached similar to high-rate wastewater digestion. An annual average loading rate of 18.5 kg COD/m3.day, resulting in a biogas production of 9.2 m3/m3 reactor.day was obtained at a full-scale plant. The plant operated at a retention time of 15.3 days. Feedstocks range from clean organic wastes (31% dry matter) to heavily polluted grey waste organics (57% dry matter). Average dry matter concentrations of the digested residue of 41% were obtained.

Bacteria, Anaerobic↗

Prediction of the amount of urban waste solids by applying a gray theoretical model.

Urban waste solids are now becoming one of the most crucial environmental problems. There are several different kinds of technologies normally used for waste solids disposal, among which landfill is more favorable in China than others, especially for urban waste solids. Most of the design works up to now are based on a roughly estimation of the amount of urban waste solids without any theoretical support, which lead to a series problems. To meet the basic information requirements for the design work, the amount of the urban waste solids was predicted in this research by applying the gray theoretical model GM (1,1) through non-linear differential equation simulation. The model parameters were estimated with the least square method (LSM) by running a certain MATALAB program, and the hypothesis test results show that the residual between the prediction value and the actual value approximately comply with the normal distribution N (0, 0.21(2)), and the probability of the residual within the range ( -0.17, 0.19) is more than 95%, which indicate obviously that the model can be well used for the prediction of the amount of waste solids and those had been already testified by the latest two years data about the urban waste solids from Loudi City of China. With this model, the predicted amount of the waste solids produced in Loudi City in the next 30 years is 8049000 ton in total.

Cities↗

Characterization of the solid waste stream of the Tohono O'odham nation.

The Tohono O'odham Nation's Solid Waste Management Program (SWMP) and the Sonora Environmental Research Institute, Inc. (SERI) completed a waste characterization study for the Tohono O'odham Nation (the Nation) to aid in the development of an effective waste management plan. The Nation has recently switched from open dumping and burning of waste to collection in dumpsters and transportation to regulated landfills. The study indicated that members of the Nation produce approximately one-third of the average amount of municipal solid waste produced per person per day in the United States. Far fewer hazardous materials and yard trimmings are found in the waste stream than is the U.S. average. Source reduction options are limited because much of the residential waste comes from packaging materials. Recycling opportunities exist but are hampered by the long distance to markets, which forces the Nation to look at innovative ways of utilizing materials on site. An education program focusing on the traditional O'odham lifestyle has been implemented to help reduce solid waste generation while improving people's health and the environment.

Arizona↗

Reducing waste of intravenous solutions.

A program to minimize the waste of i.v. drug solutions is outlined, and the results of audits to determine the effectiveness of the program are presented. The program for reducing i.v. solution waste at a 500-bed acute-care center involves measures to compound admixtures for individual shifts, recycle solutions, remove unused solutions from nursing units, use a standardized administration schedule and automatic stop orders, standardize total parenteral nutrient (TPN) solutions, use commercially prepared products when possible, verify telephone orders, and prepare labile products just before use. From January 1987 to January 1990, six 30-day audits were performed to determine the number of i.v. admixtures discarded. The audits showed the hospital's average rate of waste to be 3.27%, well below other published values. The medical and surgical intensive-care units, pediatrics wards, and general medicine units accounted for most of the waste, which was largely attributable to dosage changes and stat-type drugs ordered but never used. Poor communication between the pharmacy and the nursing units also contributed to sterile product waste. Although the audits showed that waste was already at a low level, they pointed out areas for further improvement. A computer linkup that gives physicians the formulas for i.v. solutions is being set up, the list of standardized TPN solution formulas is being expanded to include condition-specific solutions, and clinical pharmacists are establishing better communication with the nursing units. By using several methods to reduce the waste of i.v. solutions, a pharmacy department has limited the rate of waste to only 3.27%.

Appointments and Schedules↗

Use of the microscreen phage-induction assay to assess the genotoxicity of 14 hazardous industrial wastes.

The Microscreen phage-induction assay, which quantitatively measures the induction of prophage lambda in Escherichia coli WP2s(lambda), was used to test 14 crude (unfractionated) hazardous industrial waste samples for genotoxic activity in the presence and absence of metabolic activation. Eleven of the 14 wastes induced prophage, and induction was observed at concentrations as low as 0.4 pg per ml. Comparisons between the ability of these waste samples to induce prophage and their mutagenicity in the Salmonella reverse mutation assay indicate that the phage-induction assay detected genotoxic activity in all but one of the wastes that were mutagenic in Salmonella. Moreover, the Microscreen assay detected as genotoxic five additional wastes that were not detected in the Salmonella assay. The applicability of the Microscreen phage-induction assay for screening hazardous wastes for genotoxic activity is discussed, as are some of the problems associated with screening highly toxic wastes containing toxic volatile compounds.

Bacteriophage lambda↗

Chemical and radiological risk factors associated with waste from energy production.

We have tried to estimate the toxic potential of waste from nuclear power plants and from power plants burning fossil fuels. The potential risks have been expressed as 'risk potentials' or 'person equivalents.' These are purely theoretical units and represent only an attempt to quantify the potential impact of different sources and substances on human health. Existing concentration limits for effects on human health are used. The philosophy behind establishing limits for several carcinogenic chemicals is based on a linear dose-effect curve. That is, no lower concentration of no effect exists and one has to accept a certain small risk by accepting the concentration limit. This is in line with the establishment of limits for radiation. Waste products from coal combustion have the highest potential risk among the fossil fuel alternatives. The highest risk is caused by metals, and the fly ash represents the effluent stream giving the largest contribution to the potential risk. The waste from nuclear power production has a lower potential risk than coal if today's limit values re used. If one adjusts the limits for radiation dose and the concentration limit values so that a similar risk is accepted by the limits, nuclear waste seems to have a much higher potential risk than waste from fossil fuel. The possibility that such risk estimates may be used as arguments for safe storage of the different types of waste is discussed. In order to obtain the actual risk from the potential risk, the dispersion of the waste in the environment and its uptake and effects in man have to be taken into account.

Environmental Pollution↗

Characterization of microbial and chemical composition of shuttle wet waste with permanent gas and volatile organic compound analyses.

Solid-waste treatment in space for Advanced Life Support, ALS, applications requires that the material can be safely processed and stored in a confined environment. Many solid-wastes are not stable because they are wet (40-90% moisture) and contain levels of soluble organic compounds that can contribute to the growth of undesirable microorganisms with concomitant production of noxious odors. In the absence of integrated Advanced Life Support systems on orbit, permanent gas, trace volatile organic and microbiological analyses were performed on crew refuse returned from the volume F "wet" trash of three consecutive Shuttle missions (STS-105, 109, and 110). These analyses were designed to characterize the short-term biological stability of the material and assess potential crew risks resulting from microbial decay processes during storage. Waste samples were collected post-orbiter landing and sorted into packaging material, food waste, toilet waste, and bulk liquid fractions deposited during flight in the volume F container. Aerobic and anaerobic microbial loads were determined in each fraction by cultivation on R2A and by acridine orange direct count (AODC). Dry and ash weights were performed to determine both water and organic content of the materials. Experiments to determine the aerobic and anaerobic biostability of refuse stored for varying periods of time were performed by on-line monitoring of CO2 and laboratory analysis for production of hydrogen sulfide and methane. Volatile organic compounds and permanent gases were analyzed using EPA Method TO15 by USEPA et al. [EPA Method TO15, The Determination of Volatile Organic Compounds (VOCs) in Ambient Air using SUMMA, Passivated Canister Sampling and Gas Chromatographic Analysis,1999] with gas chromatography/mass spectrometry and by gas chromatography with selective detectors. These baseline measures of waste stream content, labile organics, and microbial load in the volume F Shuttle trash provide data for waste subsystem analysis and atmospheric management within the ALS Project.

Aerobiosis↗

An inexact two-stage mixed integer linear programming method for solid waste management in the City of Regina.

In this study, an interval-parameter two-stage mixed integer linear programming (ITMILP) model is developed for supporting long-term planning of waste management activities in the City of Regina. In the ITMILP, both two-stage stochastic programming and interval linear programming are introduced into a general mixed integer linear programming framework. Uncertainties expressed as not only probability density functions but also discrete intervals can be reflected. The model can help tackle the dynamic, interactive and uncertain characteristics of the solid waste management system in the City, and can address issues concerning plans for cost-effective waste diversion and landfill prolongation. Three scenarios are considered based on different waste management policies. The results indicate that reasonable solutions have been generated. They are valuable for supporting the adjustment or justification of the existing waste flow allocation patterns, the long-term capacity planning of the City's waste management system, and the formulation of local policies and regulations regarding waste generation and management.

Canada↗

Vitrified metal finishing wastes I. Composition, density and chemical durability.

Durable phosphate glasses were formed by vitrifying waste filter cakes from two metal finishing operations. Some melts formed crystalline components during cooling. Compositional analysis of dried, heat treated and vitrified samples was made using energy-dispersive X-ray spectroscopy, X-ray fluorescence spectroscopy, inductively-coupled plasma spectroscopy and Leco induction furnace combustion analysis. Hydrolytic dissolution, measured by an adapted product consistency test, was reduced by up to 3 orders of magnitude upon heat treatment or vitrification, surpassing the performance of borosilicate glass in some cases. This was attributed to the high levels of iron and zinc in the wastes, which greatly improve the durability of phosphate glasses. One of the wastes arose from a metal phosphating process and was particularly suitable for vitrification due to its high P2O5 content and favourable melting behaviour. The other waste, which arose from a number of processes, was less suitable as it had a low P2O5 content and during heating it emitted harmful corrosive gases and underwent violent reactions. Substantial volume reductions were obtained by heat treatment and vitrification of both wastes. Compositions and performances of some vitrified wastes were comparable with those of glasses which are under consideration for the immobilisation of toxic and nuclear wastes.

Crystallization↗

Comparative biomonitoring of leachates from hazardous solid waste of two industries using Allium test.

Hazardous industrial wastes are inevitable source of environmental pollution. Leachates from these wastes might contaminate the origins of potable water and affect human health. The study was carried out to determine the possible genotoxic effects of leachates from solid waste of a metal and dye industry using the Allium cepa chromosome aberrations assay. The 10% leachates were prepared from solid wastes obtained from both the industries and examined for the presence of heavy metal content and genotoxicity. To simulate the field and laboratory conditions, A. cepa bulbs were exposed through soil and aqueous medium for 48 h to 2.5-10% leachates. The results revealed that both metal waste leachate (MWL) and dye waste leachate (DWL) contained high concentrations of chromium, nickel and iron that significantly induced cytogenetic alterations. Significant inhibition of mitotic index (MI), inductions of chromosomal/mitotic aberrations (CA/MA) and micronuclei (MN) formation were found in all experimental groups exposed to MWL and DWL. The effects observed were concentration dependent and the frequency of aberrations was higher with treatment of MWL than DWL. The MI was severely inhibited at 10% aqueous exposure it was 4.59+/-0.69 (P<0.001) in MWL and almost half to that induced by DWL that was 8.62+/-0.69 (P<0.05). Significant frequency of CA/MA and MN induced by MWL was 14.21 (P<0.001) and 0.33 (P<0.001) whereas CA/MA and MN induced by DWL was 7.81 (P<0.001) and 0.13 (P<0.05) in the aqueous medium. The investigations inferred that abnormalities caused by MWL were higher than DWL both in soil and aqueous media. These toxic responses may have relied on raised heavy metal concentrations of metal-based than dye industrial wastes.

Chromosome Aberrations↗

Anaerobic co-digestion of coffee waste and sewage sludge.

The feasibility of the anaerobic co-digestion of coffee solid waste and sewage sludge was assessed. Five different solid wastes with different chemical properties were studied in mesophilic batch assays, providing basic data on the methane production, reduction of total and volatile solids and hydrolysis rate constant. Most of the wastes had a methane yield of 0.24-0.28 m3 CH4(STP)/kg VS(initial) and 76-89% of the theoretical methane yield was achieved. Reduction of 50-73% in total solids and 75-80% in volatile solids were obtained and the hydrolysis rate constants were in the range of 0.035-0.063 d(-1). One of the solid wastes, composed of 100% barley, achieved a methane yield of 0.02 m3 CH4(STP)/kg VS(initial), reductions of 31% in total solids, 40% in volatile solids and achieved only 11% of the theoretical methane yield. However, this waste presented the highest hydrolysis rate constant. Considering all the wastes, an inverse linear correlation was obtained between methane yield and the hydrolysis rate constant, suggesting that hydrolysis was not the limiting factor in the anaerobic biodegradability of this type of waste.

Anaerobiosis↗

Report on waste dump sites around Bangalore.

The present work aims at identifying, locating and quantifying the industrial and domestic waste dump sites located in and around Bangalore urban and rural districts of Karnataka state, India. Bangalore has a population of 6 million and has more than 2000 industries working at various industrial estates and other locations around the city. It was reported that about 1500 tons of municipal waste per day is being generated from Bangalore city. Studies reveal that there is no scientific treatment and disposal facility for scientific management of the waste generated. The waste from industries and community areas is disposed in an unscientific manner at several open dump sites across the city. There are more than 60 dump sites consisting of both municipal and industrial waste existing in and around Bangalore city; the locations are totally unhygienic. Based on the experience gained from field visits, physical observation of the waste disposed, quantity and nature of the waste disposed, each site was given with a grading based on polluting potential of the site. For selected sites, ground water samples were collected from nearby surface or bore wells and analysed for possible contamination. From the study, it was found that the site needed immediate attention and comes under severe impact category of 27 numbers and that of medium and low impact are 18 and 6 numbers, respectively. The disposal sites have got tremendous potential of spreading the epidemics/diseases to the people living in their immediate vicinity and at nearby places.

Cities↗

Comparison of leaching tests to determine and quantify the release of inorganic contaminants in demolition waste.

The changes in waste management policy caused by the massive generation of waste materials (e.g. construction and demolition waste material, municipal waste incineration products) has led to an increase in the reuse and recycling of waste materials. For environmental risk assessment, test procedures are necessary to examine waste materials before they can be reused. In this article, results of column and lysimeter leaching tests having been applied to inorganic compounds in a reference demolition waste material are presented. The results show a good agreement between the leaching behaviour determined with the lysimeter unit and the column units used in the laboratory. In view of less time and system requirements compared to lysimeter systems, laboratory column units can be considered as a practicable instrument to assess the time-dependent release of inorganic compounds under conditions similar to those encountered in a natural environment. The high concentrations of elements in the seepage water at the initial stage of elution are reflected by the laboratory column leaching tests. In particular, authorities or laboratories might benefit and have an easy-to-use, but nevertheless reliable, method to serve as a basis for decision-making.

Industrial Waste↗

A case study of waste management at the Northern Finnish pulp and paper mill complex of Stora Enso Veitsiluoto Mills.

This work presents the current waste management system at the pulp and paper mill complex of Stora Enso Oyj Veitsiluoto Mills at Kemi, Northern Finland. This paper covers examples of case studies carried out at the mill and describes how the wastes and by-products are utilized as a neutralizing agent for acidic wastewaters (i.e., green liquor dregs from the causticizing process), as a hardener in filling mine cavities (i.e., ash from the fluidized bed boiler), as a landscaping agent (i.e., ash as well as the fibre clay from chemical wastewater treatment plant), as a hydraulic barrier material for landfills (i.e., fibre clay), and as a soil enrichment agent (i.e., calcium carbonate from the precipitated calcium carbonate plant). In addition, the wood waste from the wood-handling plant, sawmill, packaging pallet plant and from the groundwood mill, as well as the biosludge from the biological wastewater treatment plant, are all incinerated in the fluidized bed boiler for energy production. Due to effective utilization of the solid wastes generated at the mills, the annual amount of waste to be disposed of in the landfill has decreased between 1994 and 2004 from 42,990 to 6083 tonn (expressed as wet weight). The paper also gives an overview of the relevant European Union legislation on the forest industry and on waste management, as well as of the pulping process and of the generation of major solid wastes in the pulp and paper mills.

Finland↗

Degradation of industrial waste waters on Fe/C-fabrics. Optimization of the solution parameters during reactor operation.

This study addresses the pre-treatment of toxic and recalcitrant compounds found in the waste waters arriving at a treating station for industrial effluents containing chlorinated aromatics and non-aromatic compounds, anilines, phenols, methyl-tert-butyl-ether (MTBE). By reducing the total organic carbon (TOC) of these waste waters the hydraulic load for the further bacterial processing in the secondary biological treatment is decreased. The TOC decrease and discoloration of the waste waters was observed only under light irradiation in the reactor by immobilized Fenton processes on Fe/C-fabrics but not in the dark. The energy of activation for the degradation of the waste waters was of 4.2 kcal/mol. The degradation of the waste waters was studied in the reactor as a function of (a) the amount of oxidant used (H2O2), (b) the recirculation rate, (c) the solution pH and (d) the applied temperature. With these parameters taken as input factors, statistical modeling allows one to estimate the most economic use of the oxidant and electrical energy to degrade these waste waters. The concentration of the most abundant organic pollutants during waste waters degradation was followed by gas chromatography/mass spectrometry (GC-MS). The ratio of the biological oxygen demand to the total organic carbon BOD5/TOC increased significantly due to the Fe/C-fabric catalyzed treatment from an initial value of 2.03 to 2.71 (2 h). The reactor results show that the recirculation rate has no influence on the TOC decrease of the treated waters but affects the BOD increase of these solutions.

Aniline Compounds↗