SEARCH · PubMed Health

Results for “Humic Substances”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources

PubMed2005

Characteristics of soil organic matter (SOM) extracted using base with subsequent pH lowering and sequential pH extraction.

Humic substances from eight soils of varying properties were extracted by two different methods: (1) the traditional NaOH-extraction with subsequent acidification to different pH (approximately 1 to approximately 12) and sequential extractions using 0.01 M NaNO(3) at incremental pH (approximately 1 to approximately 11). Cumulative organic matter (OM) in the sequential extractions showed properties that were consistent with NaOH-extracted OM. The release of Al and Fe in the sequential extractions was closely related with the release of organic carbon (OC). The ratio of OC associated with humic acid (HA) and fulvic acid (FA) (the HA:FA ratio) varied widely among the soils indicating heterogeneity in their OM composition. However, a significant correlation between this HA:FA ratio and the NaOH extractable %OC content of the soils is indicative of the possible relationship between them. Between pH 5 and 7, which is a typical soil solution pH, a significant amount of HA-associated OC was soluble. In modeling metal speciation in soil solutions, it has been assumed that all dissolved organic carbon (DOC) that is active toward metal binding is associated with FA. The results of this study indicate that the validity of these assumptions based on model sensitivity alone is questionable.

Aluminum↗

PubMed2003

Capillary zone electrophoresis of natural organic matter.

This paper presents an in-depth look at the use of capillary electrophoretic (CE) techniques for the fingerprinting and characterization of humic substances and natural organic matter. These materials are highly heterogeneous in structure and show all characteristics of mixtures unliked in analytical chemistry. The electrophoretic approach, however, allows the determination of mobility distributions in different solution conditions, representative of the effective charge and size distribution status of the components present. A tabulated review covers over 50 references on the subject and highlights the possibilities and problems encountered in the analysis of such polydisperse materials with CE methods. In a second part of the article the consequences of experimental and buffer parameters on the behavior of humic materials in CE are presented.

Electrophoresis, Capillary↗

PubMed1992

Biochemical composition of dissolved organic carbon derived from phytoplankton and used by heterotrophic bacteria.

The molecular size distribution and biochemical composition of the dissolved organic carbon released from natural communities of lake phytoplankton (photosynthetically produced dissolved organic carbon [PDOC]) and subsequently used by heterotrophic bacteria were determined in three lakes differing in trophic status and concentration of humic substances. After incubation of epilimnetic lake water samples with HCO(3) over one diel cycle, the phytoplankton were removed by size-selective filtration. The filtrates, still containing most of the heterotrophic bacteria, were reincubated in darkness (heterotrophic incubation). Differences in the amount and composition of PDOC between samples collected before the heterotrophic incubation and samples collected afterwards were considered to be a result of bacterial utilization. The PDOC collected at the start of the heterotrophic incubations always contained both high (>10,000)- and low (<1,000)-molecular-weight (MW) components and sometimes contained intermediate-MW components as well. In general, bacterial turnover rates of the low-MW components were fairly rapid, whereas the high-MW components were utilized slowly or not at all. In the humic lake, the intermediate-MW components accounted for a large proportion of the net PDOC and were subject to rapid bacterial utilization. This fraction probably consisted almost entirely of polysaccharides of ca. 6,000 MW. Amino acids and peptides, other organic acids, and carbohydrates could all be quantitatively important parts of the low-MW PDOC that was utilized by the heterotrophic bacteria, but the relative contributions of these fractions differed widely. It was concluded that, generally, low-MW components of PDOC are quantitatively much more important to the bacteria than are high-MW components, that PDOC released from phytoplankton does not contain substances of quantitative importance as bacterial substrates in all situations, and that high-MW components of PDOC probably contribute to the buildup of refractory, high-MW dissolved organic carbon in pelagic environments.

Journal Article↗

PubMed2006

Membrane biofouling by extracellular polymeric substances or soluble microbial products from membrane bioreactor sludge.

This study extracted the soluble microbial products and loosely bound and tightly bound extracellular polymeric substances (EPS) from suspended sludge from a membrane bioreactor, original and aerobically/anaerobically digested, and compared their fouling potentials on a microfiltration membrane. The resistance of cake layer accounts for 95-98% of the total filtration resistances when filtering the whole sludges, with anaerobically digested sludge presenting the highest resistance among the three tested sludges. The tightly bound EPS has the highest potential to foul the membrane; however, the loosely bound EPS contribute most of the filtration resistances of the whole sludges. The foulants corresponding to the irreversible fouling have chemical fingerprints similar to those from loosely bound EPS, which have a greater predilection to proteins and humic substances than to polysaccharides.

Aerobiosis↗

PubMed2005

Effect of natural organic substances on the surface and adsorptive properties of environmental black carbon (char): pseudo pore blockage by model lipid components and its implications for N2-probed surface properties of natural sorbents.

Black carbon (BC; char and soot) particles emitted to the environment typically are formed with high microporosity and surface area, properties that are responsible for their presumed important role in adsorption of anthropogenic organic compounds in soils and sediments. An issue that has received little direct attention is the possibility that naturally occurring organic matter attenuates the surface activity of BC. We found that simulated "aging" of prepared wood char particles in a soil-water suspension leads to a strong decline in char total surface area (TSA) by N2 adsorption at 77 K with BET analysis and a more modest decline in affinity for dissolved benzene. To help determine the underlying cause, we measured the effects of adsorbed natural lipids or lipid fractions of humic substances, modeled by triglycerides of a commercial vegetable oil. With increasing lipid loading (up to 40% by char weight) from aqueous mixtures, N2 TSA was strongly suppressed (up to 100-fold), while CO2 cumulative surface area (CSA, 0-1.4 nm) at 273 K and benzene adsorption at 293 K were hardly affected. In addition, the rate of CO2 adsorption was retarded. We propose that externally adsorbed lipid molecules occupy pore throats with access to interior pore networks. At 77 K, as opposed to the higher temperatures, lipid chains are too inflexible to allow passage of adsorbate. It is concluded that benzene adsorption to char predominates at interior pore sites and does not correlate with N2-probed micropore properties when the char accrues pore-blocking substances from the surroundings. The findings question the suitability of N2 for probing hydrophobic microporosity of BC in soils and sediments.

Adsorption↗

PubMedDate not supplied

Thermal analysis of whole soils and sediment.

Thermal analysis techniques were utilized to investigate the thermal properties of two soils and a lignite coal obtained from the International Humic Substances Society (IHSS), and sediment obtained from The Netherlands. Differential scanning calorimetry (DSC) revealed glass transition behavior of each sample at temperatures ranging from 52 degrees C for Pahokee peat (euic, hyperthermic Lithic Medisaprists), 55 degrees C for a Netherlands (B8) sediment, 64 degrees C for Elliott loam (fine, illitic, mesic Aquic Arguidolls), to 70 degrees C for Gascoyne leonardite. Temperature-modulated differential scanning calorimetry (TMDSC) revealed glass transition behavior at similar temperatures, and quantified constant-pressure specific heat capacity (Cp) at 0 degrees C from 0.6 J g(-1) degrees C(-1) for Elliott loam and 0.8 J g(-1) degrees C(-1) for the leonardite, to 1.0 J g(-1) degrees C(-1) for the peat and the sediment. Glass transition behavior showed no distinct correlation to elemental composition, although Gascoyne Leonardite and Pahokee peat each demonstrated glass transition behavior similar to that reported for humic acids derived from these materials. Thermomechanical analysis (TMA) revealed a large thermal expansion followed by a matrix collapse for each sample between 20 and 30 degrees C, suggesting the occurrence of transition behavior of unknown origin. Thermal transitions occurring at higher temperatures more representative of glass transition behavior were revealed for the sediment and the peat.

Calorimetry, Differential Scanning↗

PubMed1990

Trihalomethane levels in Madras public drinking water supply system and its impact on public health.

It is known that trihalomethanes (THM) are formed during chlorination of drinking water for disinfection. Heightened concern about these substances is due to the fact that THMs are now characterized as potential mutagen, carcinogen and teratogen. Thus, it is a risk factor in human beings. In the present study, a total number of 13 stations located in different drinking water trunk mains of the city of Madras were analysed for THM using the Gas Liquid Chromatographic method. It is reported that THM are formed after treatment of raw water with chlorine at the levels required for disinfection. The THM level in drinking water increased towards the dead-end of the water trunk mains. A relationship between the distance travelled by the potable water and the level of THM was established. At certain stations, the total trihalomethanes level (TTHM) was found to exceed the EPA's maximum contaminant level. Further, an intermittent addition of the precursors for the formation of THM through the seepage of polluted River Cooum water into the pipe lines has been demonstrated. An experiment on the trihalomethane formation potential (THMFP) clearly revealed the occurrence of higher magnitude of humic substances in source water. Therefore, it is suggested that if suitable steps are not taken, various environmental factors may trigger the THM kinetics. Hence, it is obvious that pretreatment regulations proposed by developed countries are essential if safe drinking water is to be supplied to the people of Madras.

Chloroform↗

PubMed1998

Enzymatic Combustion of Aromatic and Aliphatic Compounds by Manganese Peroxidase from Nematoloma frowardii.

The direct involvement of manganese peroxidase (MnP) in the mineralization of natural and xenobiotic compounds was evaluated. A broad spectrum of aromatic substances were partially mineralized by the MnP system of the white rot fungus Nematoloma frowardii. The cell-free MnP system partially converted several aromatic compounds, including [U-C]pentachlorophenol ([U-C]PCP), [U-C]catechol, [U-C]tyrosine, [U-C]tryptophan, [4,5,9,10-C]pyrene, and [ring U-C]2-amino-4,6-dinitrotoluene ([C]2-AmDNT), to CO(2). Mineralization was dependent on the ratio of MnP activity to concentration of reduced glutathione (thiol-mediated oxidation), a finding which was demonstrated by using [C]2-AmDNT as an example. At [C]2-AmDNT concentrations ranging from 2 to 120 muM, the amount of released CO(2) was directly proportional to the concentration of [C]2-AmDNT. The formation of highly polar products was also observed with [C]2-AmDNT and [U-C]PCP; these products were probably low-molecular-weight carboxylic acids. Among the aliphatic compounds tested, glyoxalate was mineralized to the greatest extent. Eighty-six percent of the COOH-glyoxalate and 9% of the CHO-glyoxalate were converted to CO(2), indicating that decarboxylation reactions may be the final step in MnP-catalyzed mineralization. The extracellular enzymatic combustion catalyzed by MnP could represent an important pathway for the formation of carbon dioxide from recalcitrant xenobiotic compounds and may also have general significance in the overall biodegradation of resistant natural macromolecules, such as lignins and humic substances.

Journal Article↗

PubMed2000

On-line monitoring by membrane introduction mass spectrometry of chlorination of organics in water. Mechanistic and kinetic aspects of chloroform formation.

Chloroform formation during the chlorination of simple organic molecules modeling humic substances, such as phenol and di- and trihydroxybenzenes, was studied by on-line membrane introduction mass spectrometry (MIMS). Under the reaction conditions employed, chloroform was rapidly formed from 1,3-dihydroxybenzene, 1, 4-dihydroxybenzene, phenol and 1,2,3-trihydroxybenzene with yields of 17, 13, 7 and 5%, respectively. With the exception of aniline, which afforded a 17% chloroform yield, non-phenolic compounds, such as nitrobenzene, chlorobenzene, toluene, benzene and cyclohexanol, furnished low yields. Mechanistic studies showed that phenol is chlorinated consecutively and produces initially chlorophenol. It is suggested that chloroform might be formed mainly from chlorinated 3, 5-cyclohexadienone-type intermediates. MIMS was also used to determine the reaction rates and to study the kinetics of the chlorination. A good Hammett linear correlation for an electrophilic substitution mechanism was found for the compounds C(6)H(5)X (X = NH(2), OH, CH(3), H, Cl and NO(2)).

Chloroform↗

PubMed1999

Interactions of hydroxy-s-triazines with sodium dodecyl sulfate-micelles investigated by micellar capillary electrophoresis.

The electrophoretic behavior of fourteen 4,6-diamino-s-triazines was investigated in the presence of an anionic surfactant (sodium dodecyl sulfate, SDS) using micellar capillary electrophoresis (MCE). The measurements were performed at the pH of zero charge of the hydroxytriazines and the existence of strong ionic and H-bond interactions of hydroxy-s-triazine species with the anionic micelles could be shown. Their migration behavior was compared to the n-octanol-water partition coefficients (log Kow) measured with reverse-phase HPLC and calculated with different fragment contribution methods. A partition model was proposed to understand the interactions of the three major hydroxy-s-triazine species: cationic, anionic and neutral (presenting enol and keto forms) with the charged SDS micelles taken as model for charged natural polyelectrolytes like humic substances. These results strongly indicate that hydroxy-striazines are polarized in the presence of the charged micelles and that they are essentially present in their keto form in the micellar phase (and enol form in the water phase), confirming previous studies suggesting the presence of zwitterionic resonance structures at a neutral pH around their isoelectric point.

Algorithms↗

PubMed2005

Analysis of bacterial diversity in acidic pond water and compost after treatment of artificial acid mine drainage for metal removal.

The microbial population of a sludge amended leaf compost material utilized for treatment of artificial acid mine drainage was studied by culture-independent molecular methods. Iron-rich and sulfurous wastewater (artificial acid mine drainage) was circulated through a column bioreactor for 16 months. After 12 months the column was inoculated with a mixed culture from an acidic pond receiving acid mine drainage from a tailings impoundment at a decommissioned site in Kristineberg, North Sweden. Hydrogen sulfide odor and the formation of black precipitates indicated that sulfate-reduction occurred in the column. 16S rDNA gene analysis by denaturing gradient gel electrophoresis, cloning, and sequencing as well as fluorescent in situ hybridization confirmed the presence of microorganisms closely related to sulfate-reducing bacteria and microorganisms from the genera Pseudoxanthmonas, Dechlorosoma, Desulfovibrio, Agrobacterium, Methylocapsa, Rhodococcus, Sulfobacillus, and some unidentified bacteria. Sulfate-reducing bacteria were found in the column bioreactor 2 weeks after inoculation, but not thereafter. This suggests they were in low abundance, even though sulfate remediation rates were significant. Instead, the population contained species similar to those previously found to utilize humic substances released from the compost material.

Bacteria↗

PubMed1997

Capillary electrophoresis of natural products.

Capillary electrophoresis (CE) and micellar electrokinetic chromatography were used for the separation of widely different compounds from natural materials including antibiotics, humic substances, flavonoids, isoflavonoids, illicit drugs, coumarins, alkaloids, steroids, Chinese herbal preparations, nicotine, caffeine, amphetamines, toxins such as aflatoxins B1, B2, G1, G2, mycotoxins, heptapeptide toxins and others, ephedrine compounds, mineral elements, and natural compounds in biological samples. A discussion of sample extraction and clean-up and the advantages of using CE is also presented.

Animals↗

PubMed2005

"In-gel patch electrophoresis:" a new method for environmental DNA purification.

Most of the microorganism species are largely untapped and could represent an interesting reservoir of genes useful for biotechnological applications. Unfortunately, a major difficulty associated with the methods used to isolate environmental DNA is related to the contamination of the extracted material with humic substances. These polyphenolic compounds inhibit the DNA processing reactions and severely impede cloning procedures. In this work, we describe a rapid, simple, and efficient method for the purification of genomic DNA from environmental samples: we added a chromatography step directly embedded into an agarose gel electrophoresis. This strategy enabled the DNA extraction from various environmental samples and it appeared that the purity grade was compatible with digestion by restriction enzymes and polymerase chain reaction (PCR) amplifications.

Bryophyta↗

PubMed2006

New approach to large-volume injection in reversed-phase high performance liquid chromatography: determination of atrazine and hydroxyatrazine in soil samples.

A well established method of direct injection of larger than conventional sample volumes ranging from 0.1 mL to 10 mL in HPLC is the injection valve method in which a loop of tubing is totally or partially filled with sample. Recent HPLC pumps have a flow-rate setting accuracy of +/- 1-2% over a flow-rate range from 0.1 mL/min to 10 mL/min and the flow stability is 0.2% or less. Quarternary low pressure gradient pumps are widely available and used, but all their hydraulic lines are seldom utilised. The idea of using one line of a common commercial HPLC quaternary low-pressure pump for direct on-column injection (pumping) of large sample volumes ranging from 1 mL to 100 mL was tested. This approach was evaluated during practical work on the development of an RP-HPLC method of determination of residual atrazine and hydroxyatrazine. In lysimetric environmental experiments hydroxyatrazine was formed in situ in a soil column by hydrolysis of atrazine. The results proved the applicability of this approach not only in experiments with model mixtures of analytes at microg/L levels in solutions. Analysis of 20 mL of soil leachates and extracts of soil samples containing atrazine and hydroxyatrazine at the 10 microg/kg level (in dry soil) revealed that good figures-of-merit were preserved, even in the presence of a large excess of humic substances.

Atrazine↗

PubMed2001

Direct characterization of iodine covalently bound to fulvic acids by electrospray mass spectrometry.

Numerous studies have demonstrated that humic substances (HS) react with iodine to form iodo derivatives and thereby can control the bioavailability of radioisotopes. Unfortunately, none of these studies have provided detailed insights into product compounds and so far, to our knowledge, the direct analysis of these species by electrospray ionization (ESI) mass spectrometry has not been explored. The reactivity of iodine with fulvic acids (FA) present in HS was investigated by means of ESI coupled with a quadrupole time-of-flight (Q-TOF) mass spectrometer. ESI spectra of solutions, that were indicated by MS/MS analysis to have formed iodinated species, apparently displayed singly charged ions corresponding in m/z to hypothesized species, viz., [RI - H](-), R = (substituted FA compound). MS/MS analysis based on the diagnostic fragment ions for FA compounds and their iodo derivatives suggests that FA undergo aromatic substitutions. Furthermore, significant differences in mass profiles are observed that presumably result from extended redox reactions. The ESI-MS technique opens up new opportunities to understand the scavenging properties of HS towards radionuclides and heavy metals for environmental studies.

Benzopyrans↗

PubMed2002

Self-esterification of fulvic acid model compounds in methanolic solvents as observed by electrospray ionization mass spectrometry.

The self-esterification of two fulvic acid model compounds in methanolic solvents was studied by electrospray ionization mass spectrometry (ESI-MS). The strongly acidic tetrahydrofurantetracarboxylic acid rapidly self-esterified to form mono- and dimethyl esters when stored in methanol, even at reduced temperatures. The weakly acidic analogue, cyclopentanetetracarboxylic acid, reacted minimally under the same conditions. The use of 50:50 methanol/water as a solvent reduced self-esterification of the strong acid. However, the presence of water promoted the formation of multiply charged ions in the ESI mass spectra. The use of water and 50:50 acetonitrile/water as solvents eliminated self-esterification but the mass spectra still contained multiply charged ions. This study implies that the use of methanolic solvents with humic substances may compromise analytical data through the formation of methyl esters.

Benzopyrans↗

PubMed1999

Genotoxicity of drinking water from Chao Lake.

Genotoxic activity appears to originate primarily from reactions of chlorine with humic substances in the source waters. Comparisons of extracts of settled versus chlorinated water have confirmed that chlorinating during water treatment produces mutagenic activity in the mutagenicity tests. Present work on XAD-2 extracts of raw, chlorinated (treated), and settled water from the Chao Lake region of China has involved a battery of mutagenicity assays for various genetic endpoints: the Salmonella test, the sister-chromatid exchange (SCE) induction in Chinese hamster lung (CHL) cells, and the micronucleus (MN) induction in the peripheral blood erythrocytes of silver carp. Extracts of raw and treated water but not the settled water are mutagenic in the Salmonella assay. On the other hand, extracts of three water samples show activity in the SCE and MN assays, especially the raw and treated water. These data show that contamination and chlorinating contribute mutagens to drinking water and suggest that the mammalian assays may be more sensitive for detecting mutagenicity in aquatic environment than the Salmonella test.

Animals↗

PubMed1999

Surface Complexation Modeling of Organic Acid Sorption to Goethite.

Surface complexation modeling was performed using the Generalized Two-Layer Model for a series of low molecular weight organic acids. Sorption of these organic acids to goethite was investigated in a previous study to assess the influence of particular structural features on sorption. Here, the ability to describe the observed sorption behavior for compounds with similar structural features using surface complexation modeling was investigated. A set of surface reactions and equilibrium constants yielding optimal data fits was obtained for each organic acid over a range of total sorbate concentrations. Surface complexation modeling successfully described sorption of a number of the simple organic acids, but an additional hydrophobic component was needed to describe sorption behavior of some compounds with significant hydrophobic character. These compounds exhibited sorption behavior that was inconsistent with ligand exchange mechanisms since sorption did not decrease with increasing total sorbate concentration and/or exceeded surface site saturation. Hydrophobic interactions appeared to be most significant for the compound containing a 5-carbon aliphatic chain. Comparison of optimized equilibrium constants for similar surface species showed that model results were consistent with observed sorption behavior: equilibrium constants were highest for compounds having adjacent carboxylic groups, lower for compounds with adjacent phenolic groups, and lowest for compounds with phenolic groups in the ortho position relative to a carboxylic group. Surface complexation modeling was also performed to fit sorption data for Suwannee River fulvic acid. The data could be described well using reactions and constants similar to those for pyromellitic acid. This four-carboxyl group compound may be useful as a model for fulvic acid with respect to sorption. Other simple organic acids having multiple carboxylic and phenolic functional groups were identified as potential models for humic substances. Copyright 1999 Academic Press.

Journal Article↗