PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “MAGNESIUM OXIDE”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources
PubMed2005

High-performance liquid chromatography of some basic drugs on a n-octadecylphosphonic acid modified magnesia-zirconia stationary phase.

The high-performance liquid chromatographic behavior of some basic drugs was studied on a n-octadecylphosphonic acid modified magnesia-zirconia (C18PZM) stationary phase. The effect of mobile phase variables such as methanol content, ionic strength, and pH on their chromatographic behavior was investigated. The retention mechanism of basic drugs on the stationary phase was elucidated. The results indicate that both hydrophobic and cation-exchange interactions contribute to solute retention under most chromatographic conditions. The inherent Brönsted-acid sites and also the adsorbed Lewis base anionic buffer constituents on accessible ZM surface Lewis acid sites play a role in the retention of ionized solutes by cation-exchange interaction. However, especially at high mobile phase pH, the retention of basic drugs depends mainly on hydrophobic interactions between solutes and support. Separations of the basic drugs on the C18PZM phase by a predominantly reversed-phase retention mode were very promising. The mixed-mode retention feature on this phase, as a result of the adsorbed Lewis base anionic buffer constituents acting as sites for cation-exchange, could also be very useful, e.g. for enhancing the chromatographic selectivity of such analytes. The C18PZM seems to be an excellent alternative to silica-based reversed-phase stationary phase for the separation of strongly basic solutes.

Chlorpromazine↗
PubMed2005

Direct observation of the growth process of MgO nanoflowers by a simple chemical route.

Novel flowerlike nanostructures consisting of MgO nanofibers were successfully synthesized by a simple chemical route with H(2)O at 950 degrees C in an Ar atmosphere. Various durations of heating gave different growth stages that led to varied product morphologies. The synthesized products were systematically studied by X-ray powder diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and energy-dispersive X-ray analysis. The results show that the nucleation and growth process of the nanoflowers seems to be a vapor-solid mechanism, and that the total heating time during the reaction process is a critical factor for the development of MgO nanoflowers. Initially, Mg particles formed on the Si substrate, followed by the formation of MgO clusters as nucleation centers on the magnesium melt surface and the nucleation of short MgO nanofibers, then growth of the MgO nanofibers occurred, and finally MgO nanoflowers were formed. Besides nanoflowers, novel hierarchical MgO nanostructures were also observed. These nanostructures may be used as three-dimensional composite materials and as supports for other materials.

Chemistry↗
PubMed1999

Prospective trial of aggressive postoperative bowel stimulation following radical hysterectomy.

INTRODUCTION: Postoperative traditional feeding protocols are not based on scientific studies, but rather on anecdotal evidence. We present the first prospective trial of aggressive postoperative bowel stimulation following radical hysterectomy in an attempt to determine its effect on the length of hospital stay. METHODS: Twenty consecutive patients undergoing radical hysterectomy were entered onto a prospective trial of aggressive postoperative bowel stimulation, which consisted of 30 cc milk of magnesia p.o. b.i.d. starting on postoperative day 1 and biscolic suppositories q.d. starting on day 2. A clear liquid diet was begun following flatus or bowel movement and patients were discharged 12 h after tolerating a clear liquid diet. Diet was slowly advanced at home. RESULTS: Median time to flatus was 3 days, bowel movement 3 days, and clear liquid diet 3 days. Median time to discharge was 4 days. No patients developed ileus or bowel obstructions and there were no readmissions for bowel complications. Our median time to discharge of 4 days represents a 50% reduction in hospital stay compared to our previous prospective study using traditional postoperative bowel management (8 days), which was statistically significant at P = 0.001. CONCLUSION: Aggressive bowel stimulation with milk of magnesia and biscolic suppositories resulted in early return of bowel function and early discharge with no noticeable complications.

Adult↗
PubMed1998

"Reagentless" flow injection determination of ammonia and urea using membrane separation and solid phase basification.

Flow injection analysis instrumentation and methodology for the determination of ammonia and ammonium ions in an aqueous solution are described. Using in-line solid phase basification beds containing crystalline media. the speciation of ammoniacal nitrogen is shifted toward the un-ionized form. which diffuses in the gas phase across a hydrophobic microporous hollow fiber membrane into a pure-water-containing analytical stream. The two streams flow in a countercurrent configuration on opposite sides of the membrane. The neutral pH of the analytical stream promotes the formation of ammonium cations, which are detected using specific conductance. The methodology provides a lower limit of detection of 10 microgram/L and a dynamic concentration range spanning three orders of magnitude using a 315-microliters sample injection volume. Using immobilized urease to enzymatically promote the hydrolysis of urea to produce ammonia and carbon dioxide, the technique has been extended to the determination of urea.

Ammonia↗
PubMed1999

Hazard assessment and risk analysis of two new synthetic vitreous fibers.

Isofrax and Insulfrax are two new synthetic vitreous fibers (SVFs) developed for high-temperature insulation (1800-2300 degrees F) applications. In an attempt to significantly reduce or eliminate the potential of adverse health effects, these two fibers were specifically designed to have high solubility and, thus, low in vivo biodurability. In this paper, we review the effects of chemical composition on biodurability, in vitro fiber dissolution rates (K(dis)), and the relevance and relationship of K(dis) to pulmonary fibrosis and lung tumors in chronic rat inhalation studies. We also examine the correlations between K(dis) and weighted in vivo half-life (t(0.5)) of long fibers (>20 microm) and their relation to pulmonary effects in chronic rat inhalation bioassays. Predictions for outcomes of inhalation bioassays and development of nonsignificant risk levels of exposure are provided. Additionally, justification for the use of inhalation versus noninhalation animal data is provided as is a brief review of human health effects of SVFs. We conclude, inter alia, that Isofrax and Insulfrax have low biodurability, would not be expected to produce either pulmonary fibrosis or lung tumors in a well-designed animal inhalation bioassay, have weighted half-lives beneath the threshold established by the European Union for classification as a carcinogen, and based on epidemiological data for SVFs would not be expected to result in incremental cancer in human cohorts. Finally, it is estimated that approximately 90% of workplace exposure concentrations of these materials would be beneath 1 f/cc. At a concentration of 1 f/cc, neither fiber would be expected to result in an incremental working lifetime cancer risk greater than 10(-5).

Animals↗
PubMed1998

Percutaneous chemolysis--an important tool in the treatment of urolithiasis.

Persistent residual calculi after therapy, i.e. extracorporeal shock wave lithotripsy (ESWL), percutaneous nephrolitholapaxy (PNL), as well as pyelo- and nephrolithotomy are big problems in the treatment of urolithiasis. Furthermore, the therapy of stones is problematic in patients with inadequate drainage, impaired kidney function, or with high risks against anaesthetics. Between 1991 and 1997 percutaneous antegrade chemolysis was carried out in eleven patients. In nine of them complete dissolution of stones was achieved. In two further cases, in which calcium oxalate was the main component of the stones, chemolysis was unsuccessful. Through our own cases and under consideration of the literature, we will show that percutaneous chemolysis in these cases is useful and effective in the treatment of urolithiasis.

Adult↗
PubMed2000

Modified on-line monitoring of total gaseous mercury in flue gases using Semtech Hg 2000 analyzer.

The Semtech Hg 2000 analyzer continuously monitors the Hg0 content in flue gas. An on-line measurement method of total gaseous mercury in flue gas developed in our laboratory is described, which uses the absorption cell of the Semtech Hg Analyzer connected to a converter that is located in a furnace heated up to 650 degrees C. The converter can be heated up to 800 degrees C by both the furnace and an extra heating of a Ni-Cr alloy heating wire. Both the absorption cell and the converter are made of quartz. All gaseous Hg2+ species in flue gas are thermally reduced to Hg0 by the converter and detected by the Semtech Hg 2000 analyzer. The thermal reduction efficiencies of different conversion materials, which were filled in the converter, such as quartz chips, granular MgO, Ni and CoO powder, were tested using different flue gas conditions. Studies have shown that HCI is the major factor to inhibit the thermal reduction of Hg2+ to Hg0, and in the converter and the absorption cell Hg0 will react readily with HCl to form HgCl2. Both MgO and Ni could be used in the converter to absorb HCl in the flue gas, but Ni has better absorption efficiency. By using an original Semtech and a modified one, both Hg0 and total gaseous Hg contents in flue gas could be monitored simultaneously and continuously.

Air Pollutants↗
PubMed2003

Inhibition of neutral Mg2+-dependent sphingomyelinase by ubiquinol-mediated plasma membrane electron transport.

Sphingomyelin is an abundant constituent of the plasma membranes of mammalian cells. Ceramide, its primary catabolic intermediate, has emerged as an important lipid signaling molecule. Previous work carried out by our group has documented that plasma membrane Mg(2+)-dependent neutral sphingomyelinase can be effectively inhibited by exogenous ubiquinol. In this work, we have tested whether or not plasma-membrane-associated electron transport can also achieve this inhibition through endogenous ubiquinol. Our results have shown that Mg(2+)-dependent neutral sphingomyelinase in isolated plasma membranes was inhibited by NAD(P)H under conditions where ubiquinone is reduced to ubiquinol. This inhibition was potentiated in the presence of an extra amount of NAD(P)H:(quinone acceptor) oxidoreductase 1 (EC 1.6.99.2). Depletion of plasma membranes from lipophilic antioxidants by solvent extraction abolished the inhibition by reduced pyridine nucleotides without affecting the sensitivity of the neutral sphingomyelinase to exogenous ubiquinol. Reconstitution of plasma membranes with ubiquinone restored the ability of NAD(P)H to inhibit the enzyme. Our results support that the reduction of endogenous ubiquinone to ubiquinol by NAD(P)H-driven electron transport may regulate the activity of the plasma membrane neutral sphingomyelinase.

Animals↗
PubMed2005

Bond strength of a new universal self-adhesive resin luting cement to dentin and enamel.

The objective of this study was to assess the bonding performance of a new universal self-adhesive cement RelyX Unicem (RXU) to dentin and enamel compared to four currently used luting systems, using a shear bond strength test with and without thermocycling. Median bond strengths were determined after 24 h storage, and after thermocycling (6,000 cycles, 5-55 degrees C) for RXU and compared to Syntac/Variolink II (SynC/V) as a standard for luting conventional ceramics, ED-Primer II/Panavia F2.0 (EDII/PF2), Prime and Bond NT/Dyract Cem Plus (PBNT/DyCP), and a glass ionomer cement, Ketac Cem (KetC), as a standard for luting high-strength ceramic and metal-based restorations. Data (n=10 per group) were statistically analyzed using the Mann-Whitney-Wilcoxon test at the 0.05 level of significance. The bond strength (MPa) of RXU to dentin (10.8) was not statistically different from those of SynC/V (15.1), EDII/PF2 (10.5) or PBNT/DyCP (10.1), and statistically higher than KetC (4.1). The bond strength of RXU to enamel (14.5) was significantly lower than those of SynC/V (32.8), EDII/PF2 (23.6), and PBNT/DyCP (17.8), but higher than KetC (6.1). After thermocycling, the bond strength of RXU to enamel significantly decreased, but was still significantly higher than that of KetC. RelyX Unicem may be considered an alternative to Ketac Cem for high-strength ceramic or metal-based restorations, and may be used for luting conventional ceramic crowns with little or no enamel left.

Compomers↗
PubMed1998

Effect of air polishing on the fluoride release of (resin-modified) glass ionomer cements and of a polyacid-modified composite resin.

Eight different conventional and resin-modified glass ionomers as well as a polyacid-modified composite were air polished and their fluoride release was determined in comparison to untreated controls. The air polishing was done with two different devices at medium and maximum setting for powder and water. Ninety discs of 1.5 mm thickness and 7.0 mm diameter were produced from each cement. These discs were stored in 5 ml deionized water at 37 degrees C. After 1 day and 1, 4, 8, 12, and 16 weeks, the specimens were transferred into new vials with fresh deionized water. From the 4th week onward, the specimens (except for the untreated controls) were air polished on half of their upper and lower surfaces for 2 s each before being put into a new vial. After 20 weeks the fluoride released during the previous 4 weeks was determined with a fluoride ion-sensitive electrode. With the exception of Ketac-Cem, all cements released significantly more fluoride ions after air polishing, irrespective of the devices' settings. The differences in the amount of fluoride released among the investigated materials were greater than the changes in fluoride release patterns caused by air polishing. Air polishing increased the fluoride release by 20-60% in most of the materials investigated.

Cariostatic Agents↗
PubMed1999

Cytocompatibility of periodontal dressing materials in fibroblast and primary human osteoblast-like cultures.

Purpose of this investigation was to determine the cytocompatibility of various periodontal dressing materials by means of human primary gingival fibroblasts (HGF), human osteoblast-like cells (HObl) derived from the alveolar bone, and permanent 3T3 mouse fibroblasts (3T3). Cell culture medium extracts (time periods of extraction: day 1 and between day 2 and day 8 after setting) as well as solid specimens of the following materials were investigated: Coe-pak, Voco pac, Peripac, and Barricaid. Responses of cultures exposed for 24 h and 48 h to these materials were monitored by the fluorescent dyes H33342 and sulforhodamin 101 as well as by light microscopy. It was found that most extracts of Voco pac, Peripac, and Barricaid did not inhibit growth of HGF. Coe-Pak, however, clearly reduced the proliferation of HGF compared to untreated controls. Peripac decreased growth of HObl whereas Coe-Pak, Voco pac, and Barricaid caused no cytotoxic alterations in any of the test assays. Contrary to HGF and HObl, 3T3 cells were much more irritated by the test materials. But the light-curing resinous material Barricaid reduced proliferation of 3T3-fibroblasts only slightly. Our data indicate that Barricaid is exceedingly cytocompatible, whereas all other materials revealed moderate or severe cytotoxic effects according to the cell type.

3T3 Cells↗
PubMed2006

Modeling the effect of liming on calcium concentration in Swedish lakes.

To abate the severe acidification of Swedish lakes are about 7% directly limed (AL-lakes). These are important to include when assessing acidification. Consequently, we need to estimate their chemical status as if they were not lime-affected. We hypothesize that there is a spatial dependence for calcium (Ca) and magnesium (Mg) concentrations. Spatial variation is determined using variograms. We study lakes within two 150 * 150 km quadrates (EMEP150-grid) in the middle and southern parts of Sweden. We model Ca in AL-lakes using the Ca and Mg concentrations in nearby, unaffected lakes (UL-lakes). The mean Ca/Mg for the three or seven closest UL-lakes is used. We assume that Ca/Mg is constant for UL-lakes and that Mg unaltered by liming. For UL-lakes, Ca and Mg are spatially dependent. For AL-lakes, there is a spatial dependence for Mg, but, as anticipated, not for Ca. The modeled Ca for UL-lakes show a good correspondence with measured Ca; r2 > 0.6; slopes close to 1 and intercepts almost 0. Using three or seven nearby lakes when modeling Ca give similar results. Modeled Ca was higher than measured Ca for 36% (three closest lakes) and 38% (seven closest) of the modeled AL-lakes in the middle part of Sweden. The corresponding results for the southern part were 10% and 9%, respectively. This model is an acceptable estimator of Ca in limed lakes and for estimating critical loads and acidification status on an EMEP-scale.

Calcium↗