PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Silicon Compounds”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources
PubMed2003

In vitro bioactivity of silicon-substituted hydroxyapatites.

Silicon-containing hydroxyapatites were synthesized by the controlled crystallization method. Chemical analysis, N(2) adsorption, Hg porosimetry, X-ray diffraction, scanning electron microscopy-energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy (XPS) were used to characterize the hydroxyapatite and to monitor the development of a calcium phosphate layer onto the surface of the substrate immersed in a simulated body fluid, that is, in vitro bioactivity tests. The influence of the silicon content and the nature of the starting calcium and phosphorus sources on the in vitro bioactivity of the resulting materials were studied. A sample of silicocarnotite, whose structure is related to that of hydroxyapatite and contains isolated SiO(4) (4-) anions that isomorphically substitute some PO(4) (3-) anions, was prepared and used as reference material for XPS studies. An increase of the unit cell parameters with the Si content was observed, which indicated that SiO(4) (4-) units are present in lattice positions, replacing some PO(4) (3-) groups. By using XPS it was possible to assess the presence of monomeric SiO(4) (4-) units in the surface of apatite samples containing 0.8 wt % of silicon, regardless the nature of the starting raw materials, either Ca(NO(3))(2)/(NH(4))(2)HPO(4)/Si(OCOCH(3))(4) or Ca(OH)(2)/H(3)PO(4)/Si(OCOCH(3))(4). However, an increase of the silicon content up to 1.6 wt % leads to the polymerization of the silicate species at the surface. This technique shows silicon enrichment at the surface of the three samples. The in vitro bioactivity assays showed that the formation of an apatite-like layer onto the surface of silicon-containing substrates is strongly enhanced as compared with pure silicon-free hydroxyapatite. The samples containing monomeric silicate species showed higher in vitro bioactivity than that of silicon-rich sample containing polymeric silicate species. The use of calcium and phosphate salts as precursors lead to materials with higher bioactivity.

Calcium↗
PubMed2004

The behavior of novel hydrophilic composite bone cements in simulated body fluids.

Composite bone cements were formulated with bioactive glass (MgO--SiO(2)--3CaO. P(2)O(5)) as the filler and hydrophilic matrix. The matrix was composed of a starch/cellulose acetate blend (SCA) as the solid component and a mixture of methylmethacrylate/acrylic acid (MMA/AA) as the liquid component. The curing parameters, mechanical properties, and bioactive behavior of these composite cements were determined. The addition of up to 30 wt % of glass improved both compressive modulus and yield strength and kept the maximum curing temperature at the same value presented by a typical acrylic-based commercial formulation. The lack of a strongly bonded interface (because no coupling agent was used) had important effects on the swelling and mechanical properties of the novel bone cements. However, bone cements containing AA did not show a bioactive behavior, because of the deleterious effect of this monomer on the calcium phosphate precipitation on the polymeric surfaces. Formulations without AA were prepared with MMA or 2-hydroxyethyl methacrylate (HEMA) as the liquid component. Only these formulations could form an apatite-like layer on their surface. These systems, therefore, are very promising: They are bioactive, hydrophilic, partially degradable, and present interesting mechanical properties. This combination of properties could facilitate the release of bioactive agents from the cement, allow bone ingrowth in the cement, and induce a press-fitting effect, improving the interfaces with both the prosthesis and the bone.

Acrylates↗
PubMed1992

Zeolite A increases proliferation, differentiation, and transforming growth factor beta production in normal adult human osteoblast-like cells in vitro.

Silicon in trace amounts enhances bone formation, and the silicon-containing compound zeolite A (ZA) increases eggshell thickness in hens. In the studies reported here, treatment of nearly homogeneous strains of normal human osteoblast-like cells for 48 h with ZA at 0.1-100 micrograms/ml induced a dose-dependent increase (r = 0.35, P < 0.001) in DNA synthesis (n = 31) to 162 +/- 16% (mean +/- SEM) of control and in the proportion of cells in mitosis (n = 4) from 9.1 +/- 1.8 to 27.0 +/- 4.5% (r = 0.69, P < 0.005). ZA treatment also increased alkaline phosphatase activity (P < 0.05) and osteocalcin release (P < 0.05) but did not significantly affect collagen production per individual cell. The mitogenic action of ZA was dependent on cell seeding density over the range of 1250-40,000 cells per cm2, which is consistent with induction of an autocrine factor(s). TGF-beta is a potent mitogen for osteoblasts. ZA treatment increased the steady-state mRNA levels of transforming growth factor beta 1 (TGF-beta 1) and induced the release of the latent form of TGF-beta protein into the conditioned medium within 6 h. We conclude that ZA induces the proliferation and differentiation of cells of the osteoblast lineage.

Alkaline Phosphatase↗
PubMed2003

Ab initio quality one-electron properties of large molecules: development and testing of molecular tailoring approach.

The development of a linear-scaling method, viz. "molecular tailoring approach" with an emphasis on accurate computation of one-electron properties of large molecules is reported. This method is based on fragmenting the reference macromolecule into a number of small, overlapping molecules of similar size. The density matrix (DM) of the parent molecule is synthesized from the individual fragment DMs, computed separately at the Hartree-Fock (HF) level, and is used for property evaluation. In effect, this method reduces the O(N(3)) scaling order within HF theory to an n.O(N'(3)) one, where n is the number of fragments and N', the average number of basis functions in the fragment molecules. An algorithm and a program in FORTRAN 90 have been developed for an automated fragmentation of large molecular systems. One-electron properties such as the molecular electrostatic potential, molecular electron density along with their topography, as well as the dipole moment are computed using this approach for medium and large test chemical systems of varying nature (tocopherol, a model polypeptide and a silicious zeolite). The results are compared qualitatively and quantitatively with the corresponding actual ones for some cases. This method is also extended to obtain MP2 level DMs and electronic properties of large systems and found to be equally successful.

Algorithms↗
PubMed1991

Scanning electron microscopy of piliated Neisseria gonorrhoeae processed with hexamethyldisilazane.

Piliated Neisseria gonorrhoeae are virulent and attach readily to some human mucosal cells. The study of interactions between piliated Neisseria gonorrhoeae and surface structures of eukaryotic cells in tissue culture requires consistent high resolution imaging in scanning electron microscopy (SEM). The combination of the fixatives glutaraldehyde, osmium, tannic acid, and uranyl acetate improves preservation of pili and other delicate structures. Following the critical point drying (CPD) process, pili bundles remained intact, but charging produced image distortion in most of the specimens. The use of hexamethyldisilazane (HMDS) with air drying substantially reduced charging and image distortion. Less contrast and greater resolution of pili bundles and surface structures of bacteria or tissue culture cells were obtained at magnifications of 10,000 or higher. As an alternative to CPD, HMDS processing of cell culture monolayers was simple and was more efficient when a large number of samples was processed.

Fimbriae, Bacterial↗
PubMed1994

EBIC study of electron generation function in a-Si:H.

The electron beam induced current technique was used to study electron energy loss in amorphous hydrogenated silicon a-Si:H. This study leads to the determination of the electron generation function which is needed when using the variable energy electron beam induced current technique (EBIC) analysis of a-Si:H device. A series of identical n-i-p a-Si:H diodes with a thin aluminium top electrodes were fabricated and varying thicknesses of a-Si:H layer were deposited on it. In EBIC measurements, the n-i-p diode was reverse biased at maximum potential. The electron range of a-Si:H was determined directly by measuring the energy at which the electron beam is completely stopped in the top layer and no carrier generation is possible in the n-i-p diode. The generation function is then deduced from EBIC contrast measurements between the aluminium electrode and the top a-Si:H layer.

Electrons↗
PubMed2001

Rate of bentazone transformation in four layers of a humic sandy soil profile with fluctuating water table.

The rate of transformation of a pesticide as a function of the depth in the soil is needed as an input into computations on the risk of residues leaching to groundwater. The herbicide bentazone was incubated at 15 degrees C in soil materials derived from four layers at depths of up to 2.5 m in a humic sandy soil profile with a fluctuating water table (0.8 to 1.4 m), while simulating the redox conditions existing in the field. Gamma-irradiation experiments indicated that bentazone is mainly transformed by microbial activity in the soil. The rate constant for transformation was highest in the humic sandy top layer; it decreased with depth in the sandy vadose subsoil. However, material from the top of the phreatic aquifer had a higher rate constant than that from the layers just above. The presence of fossil organic material in the fluviatile water-saturated sediment probably stimulated microbial activity and bentazone transformation. The changes in the transformation rate constant with depth showed the same trend as those in some soil factors, viz organic carbon content, water-extractable phosphorus and microbial density as measured by fluorescence counts. However, the (low) concentration of dissolved organic carbon (DOC) in the top of the aquifer did not fit the trend. The rate constant for bentazone transformation in the layers was higher at lower initial contents of the herbicide.

Benzothiadiazines↗
PubMed2002

Spatial variability in herbicide degradation in the subsurface environment of a groundwater protection zone.

The aim of this study was to investigate the spatial variability in degradation and mineralization of atrazine and isoproturon in subsurface samples taken from sandy loam soils overlying gravel terraces which form part of a groundwater protection zone. Percussion drilling was used to obtain samples from 11 boreholes (maximum depth 3 m). Unlabelled atrazine or isoproturon, and ring-14C-labelled atrazine or isoproturon were added to samples, incubated at 25 degrees C for up to 16 weeks, and analyzed for the residual herbicide or [14C]carbon dioxide. All samples showed the potential to degrade these herbicides, although the percentage degradation decreased by a factor of 2-3 from the surface soil to a depth of 3 m. This was associated with a decrease in organic matter content, but there was no change in the potential to mineralize acetate, indicating that specific changes in the catabolic ability of the microbial population occurred with depth. The capacity of samples to mineralize atrazine and isoproturon to carbon dioxide decreased markedly with depth, with no mineralization potential observed at a depth of 80 cm.

Acetates↗
PubMed2003

The ability of indigenous micro-organisms to degrade isoproturon, atrazine and mecoprop within aerobic UK aquifer systems.

The potential for the herbicides isoproturon, atrazine and mecoprop to degrade in the major UK aquifers of chalk, sandstone and limestone was studied using laboratory microcosms spiked at 100 microg litre(-1). Significant mecoprop degradation was only observed in sandstone groundwater samples. Atrazine transformation, based on the formation of metabolites, did occur in most groundwater samples, but only at a rate of 1-3% per year. A potential to degrade isoproturon was observed in groundwater samples from each of the aquifer types, with the most rapid and consistent degradation occurring at the sandstone field site. Biodegradation was confirmed by the formation of monodesmethyl- and didesmethyl-isoproturon. Isoproturon degradation potential rates obtained from the groundwater microcosms could not be correlated with either dissolved organic carbon or numbers of bacteria in the groundwater. It was noted that the ability of the groundwater at a field site to degrade a pesticide was not related to performance of the soil above.

2-Methyl-4-chlorophenoxyacetic Acid↗
PubMed2003

Reactions between M+ (M = Si, Ge, Sn and Pb) and benzene in the gas phase.

Using a laser ablation/inert buffer gas ion source coupled with a reflectron time-of-flight mass spectrometer, the gas-phase reactions between the IVA group element ions M(+) (M = Si, Ge, Sn and Pb) and benzene seeded in argon gas were studied. In addition to the association reaction pathway (forming [M(C(6)H(6))(x)](+), x = 1, 2, etc.), benzene was dissociated to form complex ions [M(C(5)H(5))](+), [M(C(7)H(5))](+) and [M(C(9)H(x))](+) (x = 5, 7 and 9), etc. DFT theoretical calculations indicated that, in the association products [M(C(6)H(6))](+), the M atom is close to one carbon atom of benzene, while in most of the dissociation complexes, pentagonal structures (M/cyclopentadienyl derivatives) were formed, with the M atom situated near the fivefold axis of the five-membered ring. The bond patterns in these complexes are discussed.

Benzene↗
PubMedDate not supplied

A microcantilever-based pathogen detector.

The ability to detect small amounts of materials, especially bacterial organisms, is important for medical diagnostics and national security issues. Engineered micromechanical systems provide one approach for constructing multifunctional, highly sensitive, real-time, immunospecific biological detectors. We present qualitative detection of specific Salmonella enterica strains using a functionalized silicon nitride microcantilever. Detection is achieved due to a change in the surface stress on the cantilever surface in situ upon binding of a small number of bacteria. Scanning electron micrographs indicate that less than 25 adsorbed bacteria are required for detection.

Antibodies, Bacterial↗
PubMed2003

Auto-organization in sol-gel type polycondensation: a door to the nanosciences.

Silica-based hybrid organic-inorganic materials prepared by sol-gel chemistry exhibit chemical and physical properties revealing their anisotropic organization. Besides the opportunities that these phenomena open for the preparation of new materials, they also provide arguments for the chemist looking for better comprehension and control of the solid's organization.

Biocompatible Materials↗