SEARCH · PubMed Health

Results for “Tablets”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources

PubMed2003

A rapid, low-dose, 13C-urea tablet for the detection of Helicobacter pylori infection before and after treatment.

BACKGROUND: A new urea breath test (UBT) has been described which uses a tablet formulation of 13C-urea with citric acid and allows breath sampling to be performed as early as 10 min after ingestion of the tablet. AIM: To assess the diagnostic accuracy of tablet-based 13C-UBTs (50 and 100 mg 13C-urea) before and after Helicobacter pylori eradication treatment, compared with an endoscopy gold standard and a conventional 13C-UBT (75 mg 13C-urea). METHODS: Two hundred dyspeptic patients underwent endoscopy, followed by tablet-based 13C-UBTs (50 and 100 mg 13C-urea) and a conventional 13C-UBT (75 mg 13C-urea). H. pylori-infected patients were prescribed treatment and asked to return 4-6 weeks after the end of therapy for repeat endoscopy and 13C-UBTs. RESULTS: One hundred and thirteen patients were infected with H. pylori. The sensitivity and specificity of the conventional 13C-UBT were both 100%; the sensitivity and specificity of the 100-mg tablet-based 13C-UBT were 100% and 98.85%, respectively. For the 50-mg tablet-based 13C-UBT, cut-off values of the difference over baseline of between 1.65 and 3.15 provided a sensitivity and specificity of 100%. At follow-up, the sensitivity and specificity of the conventional and 100-mg tablet-based 13C-UBTs were both 100%. For the 50-mg tablet-based 13C-UBT, cut-off values of the difference over baseline of between 1.49 and 1.56 gave a sensitivity and specificity of 100%. CONCLUSIONS: New 10-min 13C-UBTs using tablet formulations of 13C-urea with citric acid are reliable for the assessment of H. pylori status pre- and post-treatment.

Biopsy↗

PubMedDate not supplied

An investigation into the factors influencing drug release from hydrophilic matrix tablets based on novel carbomer polymers.

Drug release from hydrophilic matrix tablets can be strongly influenced by the proportion of matrix forming polymer and the dimensions and geometry of the tablets. A complete two-factor, three-level factorial design, followed by multiple regression analysis and response surface methodology, was applied to investigate the influence of polymer level and tablet size on drug release kinetics from hydrophilic matrix tablets prepared with Carbopol 971P and Carbopol 71G. Tablet diameter, radius-to-height ratio, tablet surface area, and surface-area-to-volume ratio were evaluated as independent variables in terms of their applicability to characterize tablet size and geometry. The results indicate that it may be possible to control the rate of drug release by modifying the proportion of carbomer in tablets and tablet dimensions. The practical benefit of these simulations is to optimize the geometry and dimensions of a controlled release device and reduce the number of experiments involved in the development of new controlled release dosage forms.

Absorption↗

PubMed1999

Application of near-infrared spectroscopy for nondestructive analysis of Avicel powders and tablets.

The purpose of this study was to use near-infrared spectroscopy (NIRS) as a nondestructive technique to (a) differentiate three Avicel products (microcrystalline cellulose [MCC] PH-101, PH-102, and PH-200) in powdered form and in compressed tablets with and without 0.5% w/w magnesium stearate as a lubricant; (b) determine the magnesium stearate concentrations in the tablets; and (c) measure hardness of tablets compressed at several compression forces. Diffuse reflectance NIR spectra from Avicel powders and tablets (compression forces ranging from 0.2 to 1.2 tons) were collected and distance scores calculated from the second-derivative spectra were used to distinguish the different Avicel products. A multiple linear regression model was generated to determine magnesium stearate concentrations (from 0.25 to 2% w/w), and partial least squares (PLS) models were generated to predict hardness of tablets. The NIRS technique could distinguish between the three different Avicel products, irrespective of lubricant concentration, in both the powdered form and in the compressed tablets because of the differences in the particle size of the Avicel products. The percent error for predicting the lubricant concentration of tablets ranged from 0.2 to 10% w/w. The maximum percent error of prediction of hardness of tablets compressed at the various compression forces was 8.8% for MCC PH-101, 5.3% for MCC PH-102, and 4.6% for MCC PH-200. The NIRS nondestructive technique can be used to predict the Avicel type in both powdered and tablet forms as well as to predict the lubricant concentration and hardness.

Cellulose↗

PubMed2005

Evaluation of dika nut mucilage (Irvingia gabonensis) as binding agent in metronidazole tablet formulations.

Dika nut mucilage obtained from the nuts of Irvingia gabonensis (O'Rorke) Bail (family Irvingiaceae) has been evaluated as a binding agent in metronidazole tablet formulations in comparison with gelatin BP. The compressional properties of metronidazole formulations were analyzed using density measurements and the Heckel equations as assessment parameters, whereas the mechanical properties of the tablets were assessed using the tensile strength (T), brittle fracture index (BFI), and the friability of the tablets. The drug release properties of the tablets were assessed using disintegration and dissolution times of the tablets. The results obtained indicate that formulations containing dika nut mucilage as binding agent show faster onset of plastic deformation under compression pressure than those containing gelatin. The tensile strength of the tablets increased with increase in concentration of the binding agents, whereas the BFI and friability values decreased. Furthermore, tablets containing dika nut mucilage generally showed lower tensile strength but higher brittleness and friability than those containing gelatin. The results also showed that tablets containing dika nut mucilage generally showed higher disintegration and dissolution times than those containing gelatin BP. The results suggest that dika nut mucilage could be useful in achieving various tablet strength and drug release properties.

Adhesives↗

PubMed2004

Stability and compatibility of tegaserod from crushed tablets mixed in beverages and foods.

PURPOSE: The stability and compatibility of tegaserod from crushed tablets in selected beverages and foods were studied. METHODS: Suspensions of tegaserod maleate tablets containing 6 mg of the drug base were prepared by crushing the tablets and mixing the powder with tap water, apple juice, orange juice, milk, applesauce, yogurt, and chocolate-hazelnut spread. Drug stability, drug comparability, suspension homogeneity, and completeness of a dose were measured by high-performance liquid chromatography at intervals up to three days at 20-25 degrees C and 5 degrees C. In vitro dissolution profiles were determined for crushed tegaserod tablets in water, apple juice, orange juice, and applesauce. RESULTS: Tegaserod from crushed tablets was stable in and compatible with water, apple juice, orange juice, and applesauce, and the suspensions were homogeneous. The complete dose was delivered with these media. The dissolution profiles of crushed tegaserod tablets in water and in apple juice were comparable to those of intact tablets; the dissolution profiles in orange juice and applesauce were not comparable with those of intact tablets. The results with milk, yogurt, and chocolate-hazelnut spread as vehicles were inconclusive. The suspension in milk was not homogeneous, and the dose was incomplete. CONCLUSION: Tegaserod from crushed tablets was stable in and compatible with water, apple juice, orange juice, and applesauce, but the dissolution profile in orange juice or applesauce was not acceptable. Apple juice may be the preferred vehicle because it masks the drug's taste.

Beverages↗

PubMed2004

A novel option in proton pump inhibitor dosing: lansoprazole orally disintegrating tablet dispersed in water and administered via nasogastric tube.

BACKGROUND: Lansoprazole orally disintegrating tablet, which rapidly disintegrates on the tongue or in water, provides a dosing alternative for patients with difficulty in swallowing. Gastric and nasogastric tubes are increasingly placed in patients with more severe swallowing disorders. AIM: This study assessed the pharmacokinetic profile of lansoprazole orally disintegrating tablet dispersed in a small volume of water and administered through a small-bore nasogastric tube. METHODS: Forty healthy adult men and women (18-43 years) received two single 30 mg lansoprazole orally disintegrating tablet doses (one administered directly onto the tongue without water, and one dispersed in water and administered via nasogastric tube) in a randomized, crossover fashion. RESULTS: The total plasma exposure to lansoprazole was comparable following both dosing regimens; mean AUC values for the lansoprazole orally disintegrating tablet nasogastric dispersion were < or =8.6% greater than those for the intact lansoprazole orally disintegrating tablet. Lansoprazole Cmax for the lansoprazole orally disintegrating tablet nasogastric dispersion was 20.9% greater than that for the intact lansoprazole orally disintegrating tablet, a difference of no clinical significance. CONCLUSIONS: Dispersion of the lansoprazole orally disintegrating tablet in a small volume of water and administering via nasogastric tube does not reduce the pharmacokinetic profile of the intact lansoprazole orally disintegrating tablet. This alternative dosing method may be useful in patients with nasogastric or gastric tubes.

2-Pyridinylmethylsulfinylbenzimidazoles↗

PubMed1990

Plasma concentration profiles and antihypertensive effect of conventional and extended-release felodipine tablets.

1. The rate and extent of felodipine absorption from an oral solution, conventional and extended-release tablets were investigated in two groups of healthy volunteers (n = 18 + 15). 2. The antihypertensive effect of felodipine conventional tablets twice daily (n = 71) and extended-release tablets once daily (n = 76) were compared in a parallel-group study in hypertensive patients. 3. As from a solution, felodipine was completely absorbed from the two solid dosage forms. The rate of absorption increased in the order extended-release tablets, conventional tablets, solution. 4. The extended-release tablet gave more sustained plasma concentrations than the conventional tablet. 5. The extended-release tablet given once daily gave similar blood pressure control to the conventional tablet given twice daily.

Adult↗

PubMed1977

The effects of enteric coating of aspirin tablets on occult gastrointestinal blood loss.

The effect of enteric coating of aspirin tablets on the gastrointestinal blood loss associated with high dose aspirin therapy was investigated in 12 patients with rheumatoid arthritis. Occult blood loss was measured after labelling the patients' red blood cells with Cr51. Three salicylate preparations were used: enteric coated tablets of aspirin ("Rhusal", G.P. Laboratories, 7 x 650 mg per day), uncoated tablet cores of aspirin from the same batch (7 x 650 mg per day) and enteric coated tablets of sodium salicylate (7 x 600 mg and 1 x 300 mg per day). Daily blood loss during a salicylate-free period was (0.7 +/- 0.15 ml, mean +/- SE). Blood loss was significantly increased during dosage with all three salicylate preparations. Daily blood loss during dosage with the uncoated tablets of aspirin (5.3 +/- 0.3 ml) was significantly greater than during dosage with the enteric coated tablets of aspirin (2.3 +/- 0.3 ml) and enteric coated tablets of sodium salicylate (2.1 +/- 0.4 ml). The bioavailability of the salicylate preparations was studied in seven of the 12 patients. Mean plasma salicylate concentration two hours after the second daily dose during dosage with the enteric coated tablets of aspirin was 118 +/- 15 microgram/ml compared to 131 +/- 16 microgram/ml during dosage with the uncoated tablets. Urinary recoveries of the daily dosage of aspirin in the two formulations were also similar.

Aged↗

PubMed2006

Efficacy and tolerability of diclofenac potassium sachets in migraine: a randomized, double-blind, cross-over study in comparison with diclofenac potassium tablets and placebo.

A randomized, controlled, cross-over trial compared single doses of 50 mg diclofenac potassium sachets and tablets with placebo in 328 patients with migraine pain, treating 888 attacks. For the primary endpoint 24.7% of the patients were pain free at 2 h postdose with sachets, 18.5% for tablets and 11.7% for placebo. Treatment differences were significant for sachets vs. placebo (P<0.0001), tablets vs. placebo (P=0.0040) and for sachets vs. tablets (P=0.0035). The numbers needed to treat compared with placebo to achieve pain free at 2 h were 7.75 [95% confidence interval (CI) 5.46, 13.35] for sachets and 15.83 (95% CI 8.63, 96.20) for tablets. Sachets were also statistically superior to tablets for sustained headache response, sustained pain free and reduction in headache intensity within the first 2 h postdose measured on a visual analogue scale (P<0.05). Onset of analgesic effect was 15 min for sachets and 60 min for tablets. Fewer patients needed rescue medication, and there were marked improvements in accompanying symptoms and working ability with both sachets and tablets vs. placebo. No safety issues were identified. This study demonstrates that sachets offer patients suffering from migraine pain a more effective treatment with a faster onset of analgesia when compared with tablets.

Administration, Oral↗

PubMed1980

Electrocardiographic and cardiovascular changes in cats and dogs caused by high doses of amitriptyline given as conventional tablets or a sustained release preparation.

Electrocardiographic and haemodynamic changes have been compared in anesthetized cats and in conscious dogs after high doses of amitriptyline given as conventional tablets or as a sustained release form. Plasma or serum levels of amitriptyline and nortriptyline were determined. In anaesthetized cats tablets caused marked ECG changes in all 6 animals combined with pronounced acidosis in 3 of the animals. The sustained release form caused no electrocardiographic changes in 4 animals and moderate disturbances in 2 animals, without acidosis in any of the 6 cats. Almost identical haemodynamic changes were seen in both groups. The plasma levels did not indicate poorer absorption from one preparation than from the other. In conscious dogs tablets caused marked clinical signs including restlessness, sedation and convulsions (2 dogs). Pronounced electrocardiographic changes were seen in all 4 dogs. Bundle branch block developed in 3 dogs. The sustained release preparation caused slight to moderate sedation and no convulsions. Pronounced electrocardiographic changes without bundle branch block were seen in one dog. Moderate changes were seen in the remaining dogs. Acidosis was most pronounced after the tablets. The serum drug levels clearly show that the absorption is much slower after administration of the sustained release preparation than after tablet administration and that somewhat lower amounts of drug are absorbed from the sustained release preparation than from tablets. It is evident from the present studies, that administration of high doses of amitryptyline as a sustained release preparation causes less toxic manifestations than given as conventional tablets. Part of the explanation may be that less amitryptyline is absorbed from the sustained release preparation than from tablets because of the high dose (dogs), but the main reason is most likely that the absorption from the sustained release preparation is much slower than the absorption from tablets.

Amitriptyline↗

PubMed1978

Content uniformity of potent drugs in tablets.

The type of distribution of low dosage drugs that occurs in batches of commercially available tablets has been examined. The uniformity of content of ethinyloestradiol tablets 10 micrograms B.P. from different sources, assessed by single tablet assay showed that three batches exhibited some positive skewness and one marked positive skewness. At the high level of dilution required, the mixing theory indicates that particles of drug must be very fine if acceptable content uniformity is to be obtained. Cohesion of particles impairs the efficiency of the mixing process. It is shown theoretically that unless the drug is dispersed into its component particles the shape of the distribution curve for the content of drug per tablet, in a batch of tablets, will be positively skewed. The relation between the tensile strength of the powdered drug and the degree of skewness of the drug content is also discussed. A positively skewed distribution for tablets containing a small amount of potent drug is unacceptable because this can lead to the presence of relatively large doses of drug in a single tablet. Where one unexpectedly high result occurs in the quality control of the content uniformity of tablets containing potent drugs it is suggested that sufficient single tablet assays be performed to allow the shape of the distribution curve to be assessed. A test for skewness should be included in compendial standards.

Ethinyl Estradiol↗

PubMed2004

Evaluation of the potential use of poly(ethylene oxide) as tablet- and extrudate-forming material.

The purpose of this study was to assess the potential use of poly(ethylene oxide) (PEO) as matrix-forming material for tablets and extrudates. Raw materials were characterized for size, size distribution, and shape. Tablets with 2- and 10-mm diameter were prepared by direct compression at both 13 and 38 MPa from mixtures with poly(ethylene oxide)s, a model drug (propranolol hydrochloride), and lactose. To these mixtures water was added (16%-43%) prior to extrusion in a ram extruder fit with different dies (1-, 3-, 6-, and 9-mm diameter and 4-mm length). Tablets and extrudates were characterized for work of compression or extrusion, respectively, relaxation, tensile strength, friability, and drug release. Both PEOs produced tablets easily and with different properties. Some relaxation was observed, particularly for tablets with higher amounts of PEOs. Release of the drug occurred after swelling of the matrix, and between 10% and 70% drug released, a quasi zero-order release was observed for large tablets. Extrusion was possible for formulations with PEO only with amounts of water between 16% and 50%. Both radial and axial relaxation of both plugs and extrudates were observed. Moreover, different extrusion profiles reflected the different behaviors of the different formulations. The model drug was released in the same fashion as observed for the tablets. It was possible to produce tablets by direct compression and extrudates or pellets from those extrudates from different formulations with PEO. Tablets and pellets have shown distinct properties depending upon the PEO considered. Extrusion was particularly complex with different formulations with PEO.

Delayed-Action Preparations↗

PubMed2000

Evaluation of quick disintegrating calcium carbonate tablets.

The purpose of this investigation was to develop a rapidly disintegrating calcium carbonate (CC) tablet by direct compression and compare it with commercially available calcium tablets. CC tablets were formulated on a Carver press using 3 different forms of CC direct compressed granules (Cal-Carb 4450, Cal-Carb 4457, and Cal-Carb 4462). The breaking strength was measured using a Stokes-Monsanto hardness tester. The disintegration and dissolution properties of the tablets were studied using USP methodology. The calcium concentration was determined by an atomic absorption spectrophotometer. Scanning electron microscopy was used to evaluate the surface topography of the granules and tablets. Breaking strength of Cal-Carb 4450, Cal-Carb 4457, and Cal-Carb 4462 tablets was in the range of 7.2 to 7.7 kg, as compared with a hardness of 6.2 kg and 10 kg for the commercially available calcium tablets Citracal and Tums, respectively. The disintegration time for the tablets presented in the order earlier was 4.1, 2.1, 1.9, 2.9, and 9.7 minutes, respectively. The dissolution studies showed that all formulations released 100% of the elemental calcium in simulated gastric fluid in less than 20 minutes. In summary, this study clearly demonstrated that quick disintegrating CC tablets can be formulated without expensive effervescence technology.

Calcium Carbonate↗

PubMed2003

The 3-D model: comparison of parameters obtained from and by simulating different tableting machines.

The aim of this study is to apply 3-D modeling to data obtained from different tableting machines and for different compression wheels on a linear rotary tableting machine replicator. A new analysis technique to interpret these data by 3-D parameter plots is presented. Tablets were produced on an instrumented eccentric tableting machine and on a linear rotary tableting machine replicator. The materials used were dicalcium phosphate dihydrate (DCPD), spray-dried lactose, microcrystalline cellulose (MCC), hydroxypropyl methylcellulose (HPMC), and theophylline monohydrate. Tableting was performed to different maximum relative densities (rho (rel, max)). Force, time, and displacement were recorded during compaction. The 3-D data plots were prepared using pressure, normalized time, and porosity according to Heckel. A twisted plane was fitted to these data according to the 3-D modeling technique. The resulting parameters were analyzed in a 3-D parameter plot. The results show that the 3-D modeling technique can be applied to compaction cycles from different tableting machines as different as eccentric and rotary tableting machines (simulated). The relation of the data to each other is the same even when the absolute values are different. This is also true for different compression wheels used on the linear rotary tableting machine replicator. By using compression wheels of different sizes on this simulator, mainly time plasticity changes. By using bigger compression wheels for simulation, the materials deform slower at lower densification and they deform faster at higher densification. For brittle materials, the stages of higher densification are influenced; for plastically deforming materials, the stages of lower and higher densification can be influenced.

Computer Simulation↗

PubMed2005

Effect of polysulfonate resins and direct compression fillers on multiple-unit sustained-release dextromethorphan resinate tablets.

The purpose of this work was to investigate the effect of different polysulfonate resins and direct compression fillers on physical properties of multiple-unit sustained-release dextromethorphan (DMP) tablets. DMP resinates were formed by a complexation of DMP and strong cation exchange resins, Dowex 50 W and Amberlite IRP69. The tablets consisted of the DMP resinates and direct compression fillers, such as microcrystalline cellulose (MCC), dicalcium phosphate dihydrate (DCP), and spray-dried rice starch (SDRS). Physical properties of tablets, such as hardness, disintegration time, and in vitro release, were investigated. A good performance of the tablets was obtained when MCC or SDRS was used. The use of rod-like and plate-like particles of Amberlite IRP69 caused a statistical decrease in tablet hardness, whereas good tablet hardness was obtained when spherical particle of Dowex 50 W was used. The plastic deformation of the fillers, such as MCC and SDRS, caused a little change in the release of DMP. A higher release rate constant was found in the tablets containing DCP and Dowex 50 W, indicating the fracture of the resinates under compression, which was attributable to the fragmentation of DCP. However, the release of DMP from the tablets using Amberlite IRP69 was not significantly changed because of the higher degree of cross-linking of the resinates, which exhibited more resistance to deformation under compression. In conclusion, the properties of polysulfonate resin, such as particle shape and degree of cross-linking, and the deformation under compaction of fillers affect the physical properties and the drug release of the resinate tablets.

Compressive Strength↗

PubMed2006

Monitoring tablet surface roughness during the film coating process.

The purpose of this study was to evaluate the change of surface roughness and the development of the film during the film coating process using laser profilometer roughness measurements, SEM imaging, and energy dispersive X-ray (EDX) analysis. Surface roughness and texture changes developing during the process of film coating tablets were studied by noncontact laser profilometry and scanning electron microscopy (SEM). An EDX analysis was used to monitor the magnesium stearate and titanium dioxide of the tablets. The tablet cores were film coated with aqueous hydroxypropyl methylcellulose, and the film coating was performed using an instrumented pilot-scale side-vented drum coater. The SEM images of the film-coated tablets showed that within the first 30 minutes, the surface of the tablet cores was completely covered with a thin film. The magnesium signal that was monitored by SEM-EDX disappeared after ~15 to 30 minutes, indicating that the tablet surface was homogeneously covered with film coating. The surface roughness started to increase from the beginning of the coating process, and the increase in the roughness broke off after 30 minutes of spraying. The results clearly showed that the surface roughness of the tablets increased until the film coating covered the whole surface area of the tablets, corresponding to a coating time period of 15 to 30 minutes (from the beginning of the spraying phase). Thereafter, the film only became thicker. The methods used in this study were applicable in the visualization of the changes caused by the film coating on the tablet surfaces.

Coated Materials, Biocompatible↗

PubMed1984

Effect of food on bioavailability of nalidixic acid from uncoated tablets having different dissolution rates.

The effect of food on the bioavailability of two single lots of commercial tablets and one trial tablet of nalidixic acid, varying widely in drug dissolution characteristics, was determined in healthy male subjects after oral administration. Four subjects received, in a crossover fashion, a single 250 mg dose in an uncoated tablet during periods of fasting and non-fasting. Significant differences in Cmax, Tmax and AUC0-8 were observed between the tablet having the fastest dissolution rate and the other tablets tested, when administered postprandially. Both Cmax and AUC0-8 were significantly increased after administration of the two tablets exhibiting the poorer dissolution characteristics to the non-fasting subjects. However, food was not observed to affect any of the bioavailability parameters after postprandial administration of the tablet exhibiting the fastest dissolution rate. The improvement of bioavailability of the two tablets exhibiting the poorer dissolution by food intake was ascribable to enhanced dissolution of nalidixic acid resulting from vigorous mixing and agitation in the digestive tract. It was concluded that the effect of food on the bioavailability of nalidixic acid from uncoated tablets varies with formulation factors, especially with dissolution characteristics.

Adult↗

PubMed2005

[The quality evaluation of magnesium oxide tablet due to acid neutralization action].

For the purpose of quality evaluation of magnesium oxide (MgO) tablets, we considered the dissolution test method with changes in the pH of the dissolution medium as an indicator and studied the elution behavior of MgO from commercial MgO tablets. We also studied the effects of particle size on the elution rate of MgO from MgO tablets. A dissolution test was carried out using the rotating basket method in 100 ml of the first fluid (pH 1.2). The stirring speed was set at 200 rpm. The elution behaviors of MgO from two products were markedly different. The medium pH for the sample MM (Magmit) tablet after 15 min reached 9.5 but that for ML (Maglax) tablet was 2.7 even after 60 min. The apparent solubility of MgO in 100 ml of the first fluid were, respectively, 175 mg and 100 mg when medium pH as 9.5 and 1.5. The low dissolution of ML tablets is thought to be due to the large particle size (average particle size r = 226 microm) or due to the effects of additives on elution. These results suggest that neutralizing activity after ingestion of MgO tablets and subsequent laxative effects may, when conditions after ingestion of MM tablets and after ingestion of ML tablets are compared, produce differences between them. We found that the dissolution test method with pH as an indicator is useful in assessing the dissolution behavior of MgO preparations.

Cathartics↗