PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “WASTES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources

[Investigation of radioactivity measurement of medical radioactive waste].

To explore the possibility of which medical radioactive wastes could be disposed as general wastes after keeping them a certain period of time and confirming that their radioactivity reach a background level (BGL), we made a survey of these wastes in several nuclear medicine facilities. The radioactive wastes were collected for one week, packed in a box according to its half-life, and measured its radioactivity by scintillation survey meter with time. Some wastes could reach a BGL within 10 times of half-life, but 19% of the short half-life group (group 1) including 99mTc and 123I, and 8% of the middle half-life group (group 2) including 67Ga, (111)In, and 201Tl did not reach a BGL within 20 times of half-life. A reason for delaying the time of reaching a BGL might be partially attributed to high initial radiation dose rate or heavy package weight. However, mixing with the nuclides of longer half-life was estimated to be the biggest factor affecting this result. When disposing medical radioactive wastes as general wastes, it is necessary to avoid mixing with radionuclide of longer half-life and confirm that it reaches a BGL by actual measurement.

Half-Life↗

Effect of enzymatic pretreatment on solubilization and volatile fatty acid production in fermentation of food waste.

Food waste can be a valuable carbon source in biological nutrient removal (BNR) systems because of the high C/N and C/P ratio. However, pretreatment is necessary to promote hydrolysis of food waste because of the high concentration of volatile solids associated with organic matter. The influence of the enzymatic pretreatment on acid fermentation of food waste was investigated in this study. Solubilization of particulate matter in food waste was carried out using commercial enzymes. The acidification efficiency and the volatile fatty acid (VFA) production potential of enzymatically pretreated food waste were examined. The highest volatile suspended solid (VSS) reduction was obtained with an enzyme mixture ratio of 1:2:1 for carbohydrase: protease: lipase. An optimum enzyme dosage for solubilization of food waste was 0.1% (V/V) with the enzyme mixture ratio of 1:2:1. In the acid fermentation of enzymatically pretreated food waste, the maximum VFA production and the highest VFA fraction in soluble COD (SCOD) were also achieved at 0.1% (V/N) of total enzyme dosage. Increase in VFA production at this level of enzyme dosage was over 300% compared with the control fermenter. The major form of VFA produced by fermentation was n-butyrate followed by acetate.

Acetates↗

Hazardous waste management.

The management of waste in the dental office is dictated by the federal, state, and local ordinances in force in the locale in which the office is located. The dentist must first determine what the laws require and then implement the changes in waste management into the office setting. The local component society of the ADA often provides such information; otherwise, the health department of the government branch having jurisdiction over the office locale will either have the information or know where to find it. Once it has been established what constitutes hazardous waste, the next steps are to contain it, store it, and finally dispose of it according to the information gained from the authorities. Storage of sharps should be accomplished in "hard-walled, leak-proof containers," usually red, which can be closed securely when they have been filled, and which are located as close to the point of use as possible. Solid waste should usually be contained in red bags, which are then bagged in a second bag when full or in a hard-walled container. Waste may then be hauled away for disposal by a qualified company that keeps the required records of the waste from the time it leaves the office until final disposal by incineration or burial in an approved landfill. The company chosen to do the hauling should be able to demonstrate that they have appropriate insurance to indemnify your office in the event of a problem while they have the waste in their possession.(ABSTRACT TRUNCATED AT 250 WORDS)

Dental Offices↗

Medical waste: socioeconomic impact.

The proper disposal and management of medical waste is a never-ending problem and one which is of grave concern to the general public. The amounts that are produced each day by hospitals and other small-generators are staggering, e.g., in the U.S. ca. 6000 tons per day. Approximately fifteen (15%) percent of this waste is considered infectious. This latter type of waste is usually incinerated or autoclaved (steam sterilization). In addition to the daily accumulation of solid waste, chemical wastes (liquids) and low-level radioactive wastes are generated. The proper disposal of all types of wastes is discussed as well as the overall cost and its impact on society.

Medical Waste↗

[Utilization of mycelial waste of antibiotic production in the technology of kilned construction materials].

At present the main part of the mycelial waste of antibiotic production is collected in sludge lagoones, discarded to the sewage treatment system or burnt. The mycelial waste is one of the causes of the environmental pollution. It contains a significant quantity of valuable substances, such as lipids, carbohydrates, proteins and amino acids. The inorganic portion of the waste includes the compounds of calcium, magnesium, sodium, iron, silicium and phosphorus. The levels of the above substances in the mycelial waste allow using it as organic mineral additives in making expanded clay aggregate gravel with the use of low quality clay and loam. It may be also used as the burn-out of the raw material charge in making burnt bricks and other burnt building materials. By its calorific value the mycelial waste is equal to brown coal or peat. It was shown that the structural and mechanical properties of the mixtures of the mycelium and clay depended on the moisture content of the composition and the proportion of its components. The mycelial waste provided a decrease in the optimal temperature of burning by 40-50 degrees C. The production tests at the expanded clay aggregate plants showed that the bulk weight of expanded clay aggregate might be lowered by 50-100 kg/m3 and the usual additives with the use of petroleum products might be completely excluded from the technological process. The use of the mycelial waste for manufacture of burnt building materials provides saving of the fuel energy sources and improvement of the quality of the finished product. It is also important from the ecological viewpoint.

Anti-Bacterial Agents↗

Report of the Council on Scientific Affairs. Biohazardous waste management: what the physician needs to know. American Medical Association.

Sources of biohazardous waste include not only large hospitals and laboratories, but also physicians' offices, dental offices, clinics, research facilities, surgery centers, veterinary offices, funeral homes, and a growing number of settings where home health care is delivered. State and local municipality definitions and regulations on biohazardous waste vary widely. Most regulations exempt home health care settings, but include physicians' offices. Although the infectious public health risk posed by medical waste is exceedingly low, this fact is not well understood by the general public. Physicians should develop biohazardous waste management programs that fulfill their county, state, and municipal regulations and that consider the difference between health risks to employees and risks to the general public. Physicians can considerably reduce the amount and costs of biohazardous waste disposal by proper identification and segregation of waste in a manner that meets their state's criteria. Using products that can be recycled may reduce the amount and costs of disposal of biohazardous waste. Processing costs also may be reduced by cooperative arrangements among medical groups or health care facilities to negotiate group disposal rates with vendors.

American Medical Association↗

Ethanol from lignocellulosic wastes with utilization of recombinant bacteria.

This article presents the advanced technology that has been developed by BioEnergy International of Gainesville, Florida, utilizing novel recombinant strains of bacteria developed by Lonnie Ingram of the University of Florida. The first commercial applications of these unique fermenting organisms convert 5-carbon sugars, as well as 6-carbon sugars, and oligomers of cellulose (e.g., cellobiose and cellotriose) directly to ethanol. The proposed systems that will be utilized for conversion of agricultural wastes, mixed waste papers, and pulp and paper mill waste in forthcoming commercial installations are now under design. This involves the extensive experience of Raphael Katzen Associates International, Inc. in acid hydrolysis, enzyme production, enzymatic hydrolysis, large-scale fermentation engineering, and distillation/dehydration. Specific examples of this advanced technology will be presented in different applications, namely: 1. Conversion of the hemicellulose content of sugar cane bagasse to 5-carbon sugars by mild-acid prehydrolysis, followed by fermentation of the 5-carbon sugar extract with recombinant Escherichia coli in a commercial installation soon to be under construction in Brazil. This unique process utilizes the surplus hemicellulose fraction of bagasse not required for steam and power generation to produce ethanol, additional to that from the original can juice, which has been converted by conventional sucrose fermentation to ethanol. The process also recovers and converts to ethanol the majority of sucrose normally lost with the bagasse fibers. Resultant beer is enriched in an innovative process to eliminate the need for incremental rectification capacity. 2. Application of this technology to mixed waste paper in Florida, with a moderate loading of newsprint (85% mechanical wood fiber), will involve a mild-acid prehydrolysis, the partial extraction of the 5-carbon sugars produced from hemicellulose as a feedstock for propagation of the recombinant Klebsiella oxytoca bacterium. Included is a facility providing for in-house production of cellulase enzyme, as an active whole broth for direct use in simultaneous saccharification and fermentation (SSF) of the remaining cellulose and residual 5-carbon sugars to ethanol. This is followed by distillation and dehydration in the advanced commercially available low-energy recovery system. 3. Another potential application of this unique technology involves utilization of a variety of wastes from several pulp and paper mills in close proximity, permitting collection of these wastes at low cost and reducing the considerable cost encountered in disposing of such low-energy wet waste.(ABSTRACT TRUNCATED AT 400 WORDS)

Cellulose↗

Health effects associated with indoor storage of organic waste.

OBJECTIVES: The storing of organic waste indoors for several days can be considered a risk factor for microbial contamination of homes. This has become relevant in the scope of modern waste management programmes. This study specifically addresses possible health aspects in this context. METHODS: In a cross-sectional study, doctors collected 384 questionnaires in three neighbourhoods without industrial sources for microbial contamination in 1997 in Hesse, Germany. Self-reported prevalence of airway, skin and general health complaints during the past year, lifetime diagnoses by a doctor, and home hygiene (storage of garbage, private composting, pet contact, indoor mould growth), were assessed. With logistic regression analysis, odds ratios (ORs) adjusted for age, gender, level of school education, and frequent contact with dog or cat were determined for indoor storage of waste for more than 2 days for the whole study group and also for a subgroup reporting atopic disposition. RESULTS: Longer indoor storage of organic waste was associated with "skin rash" (OR=2.05 [95% confidence interval (CI) 1.09, 3.83]), "itching skin rash (>2 months) in the past 12 months" (OR=3.58 [95% CI 1.61, 7.96]) and "itching skin rash (>2 months) ever" (OR=2.77 [95% CI 1.33, 5.75]), as well as lifetime diagnoses of skin disease by a doctor (OR=3.16 [95% CI 1.40, 7.10]) and allergy other than hay fever (OR=2.74 [95% CI 1.28, 5.85]). Associations remained when adjustment was made for atopic disposition. Atopic subjects were at higher risk for these skin-related complaints and diseases. CONCLUSIONS: These results point to a possible health relevance of the storing of organic waste in the home for several days, especially as far as skin irritation is concerned. These associations possibly result from indoor microbial contamination, e.g., endotoxins due to waste. Atopic disposition is a possible risk factor for this health impairment. Personal waste management should also be considered in studies on health and indoor environments.

Cross-Sectional Studies↗

Process optimization for extraction of carotenoids from shrimp waste with vegetable oils.

Shrimp waste is an important source of natural carotenoid. Studies were carried out to determine the extraction yield of shrimp waste carotenoids in different vegetable oils. Highest yield was obtained by extraction using refined sunflower oil compared to groundnut oil, gingelly oil, mustard oil, soy oil, coconut oil and rice bran oil. The extraction yield of carotenoids in sunflower oil was significantly influenced by level of oil to waste (p < 0.05), time (p < 0.01) and temperature (p < 0.001) of heating waste with oil before centrifugation to separate pigmented oil. A regression equation was derived for carotenoid yield as a function of time of heating, temperature of heating and oil level to waste. The optimized conditions for extraction of shrimp waste carotenoids in sunflower oil were determined to be oil level to waste of 2, temperature of 70 degrees C and heating time of 150 min.

Analysis of Variance↗

Ammonia emissions from the composting of different organic wastes. Dependency on process temperature.

Ammonia emissions were quantified for the laboratory-scale composting of three typical organic wastes with medium nitrogen content: organic fraction of municipal solid wastes, raw sludge and anaerobically digested sludge; and the composting of two wastes with high nitrogen content: animal by-products from slaughterhouses and partially hydrolysed hair from the leather industry. All the wastes were mixed with the proper amount of bulking agent. Ammonia emitted in the composting of the five wastes investigated revealed a strong dependence on temperature, with a distinct pattern found in ammonia emissions for each waste in the thermophilic first stage of composting (exponential increase of ammonia emitted when increasing temperature) than that of the mesophilic final stage (linear increase of ammonia emissions when increasing temperature). As composting needs high temperatures to ensure the sanitisation of compost and ammonia emissions are one of the main environmental impacts associated to composting and responsible for obtaining compost with a low agronomical quality, it is proposed that sanitisation is conducted after the first stage in large-scale composting facilities by a proper temperature control. CAPSULE: Ammonia emission pattern and correlation with process temperature are presented for the composting process of different organic wastes.

Air Pollutants↗

Advances in encapsulation technologies for the management of mercury-contaminated hazardous wastes.

Although industrial and commercial uses of mercury have been curtailed in recent times, there is a demonstrated need for the development of reliable hazardous waste management techniques because of historic operations that have led to significant contamination and ongoing hazardous waste generation. This study was performed to evaluate whether the U.S. EPA could propose treatment and disposal alternatives to the current land disposal restriction (LDR) treatment standards for mercury. The focus of this article is on the current state of encapsulation technologies that can be used to immobilize elemental mercury, mercury-contaminated debris, and other mercury-contaminated wastes, soils, sediments, or sludges. The range of encapsulation materials used in bench-scale, pilot-scale, and full-scale applications for mercury-contaminated wastes are summarized. Several studies have been completed regarding the application of sulfur polymer stabilization/solidification, chemically bonded phosphate ceramic encapsulation, and polyethylene encapsulation. Other materials reported in the literature as under development for encapsulation use include asphalt, polyester resins, synthetic elastomers, polysiloxane, sol-gels, Dolocrete, and carbon/cement mixtures. The primary objective of these encapsulation methods is to physically immobilize the wastes to prevent contact with leaching agents such as water. However, when used for mercury-contaminated wastes, several of these methods require a pretreatment or stabilization step to chemically fix mercury into a highly insoluble form prior to encapsulation. Performance data is summarized from the testing and evaluation of various encapsulated, mercury-contaminated wastes. Future technology development and research needs are also discussed.

Environmental Pollutants↗

Vitrified metal finishing wastes II. Thermal and structural characterisation.

Waste filter cakes from two metal finishing operations were heat treated and vitrified. Substantial weight loss during heating was due to emission of water, volatile sulphur-rich and chlorine-rich compounds, and the combustion of carbonaceous components. Estimations of CO(x), SO(x) and HCl emissions were based on chemical analyses. Upon cooling from molten, one sample remained amorphous but all others partially crystallised. Crystalline nature was dependent upon waste composition and the level of P(2)O(5) addition. Thermal stabilities of the waste forms were good, but less so than MW, a borosilicate glass developed for its high temperature stability. Mossbauer and FTIR analyses showed that iron environments in the different vitrified waste forms were very similar. Iron was present predominantly as Fe(3+), although the exact redox ratio varied slightly between waste forms. Iron in both redox states occupied distorted octahedral coordination polyhedra with similar levels of site distortion. Phosphate networks in the vitreous materials were highly de-polymerised, consisting largely of (PO(4))(3-) monomer and (P(2)O(7))(2-) dimer units. This explained the high chemical durability of these waste forms and their structural insensitivity to compositional change, underlining their suitability as hosts for the immobilisation of toxic and nuclear wastes.

Differential Thermal Analysis↗

Test method selection, validation against field data, and predictive modelling for impact evaluation of stabilised waste disposal.

In setting criteria for landfill classes in Annex II of the EU Landfill Directive, it proved to be impossible to derive criteria for stabilised monolithic waste due to the lack of information on release and release controlling factors in stabilised waste monofills. In this study, we present a scientific basis, which enables a realistic description of the environmental impact of stabilised waste landfills. The work in progress involves laboratory testing of different stabilisation recipes, pilot scale studies on site and evaluation of field leachate from a full-scale stabilisation landfill. We found that the pHs in run-off and in percolate water from the pilot experiment are both around neutral. The neutral pH in run-off is apparently caused by the rapid atmospheric carbonation of those alkaline constituents that are released. The soil, used as a liner protection layer, controls the release to the subsurface below the landfill. This soil layer buffers pH and binds metals. The modelling results show that the chemistry is understood rather well. Differences between predicted and actual leaching might then be attributed to discrepancies in the description of sorption processes, complexation to organic matter and/or kinetic effects in the leaching tests. We conclude that this approach resulted in a new scientific basis for environmental impact assessment of stabilised waste landfills. The integrated approach has already resulted in a number of very valuable observations, which can be used to develop a sustainable landfill for monolithic waste and to provide guidance for the management of waste to be stabilised (e.g. improved waste mix design).

Hazardous Waste↗

Potential compromise of hospital hygiene by clinical waste carts.

Bulk waste storage carts are common in hospitals and undoubtedly assist in the day-to-day management of clinical wastes. They are used for the transport and interim storage of primary clinical waste containers and are often located close to or within hospital buildings to receive such wastes from clinical departments. Examination of a random selection of bulk clinical waste carts at nine acute hospitals across Greater London revealed external soiling in all of 23 carts. Eight of 13 carts were also soiled on the inner surfaces, with evidence of bloodstains and free fluids in the base of five carts. Staphylococcus aureus and enterococci were recovered in low numbers from the lids (N=7) and wheels (N=10) of carts and Escherichia coli, Enterobacter spp. and Pseudomonas aeruginosa were recovered from the wheels of a further five carts. Two carts were heavily contaminated with Aspergillus spp. Pathogens originating from clinical wastes may be transferred from contaminated bulk waste carts to the wider hospital environment. It may be advisable to keep bulk carts outside clinical areas, and preferably outside all hospital buildings. This becomes particularly important in circumstances where carts supplied by contractors are not dedicated to a single hospital or National Health Service trust.

Blood-Borne Pathogens↗

Medical wastes management in the south of Brazil.

In developing countries, solid wastes have not received sufficient attention. In many countries, hazardous and medical wastes are still handled and disposed together with domestic wastes, thus creating a great health risk to municipal workers, the public and the environment. Medical waste management has been evaluated at the Vacacai river basin in the State of Rio Grande do Sul, Brazil. A total of 91 healthcare facilities, including hospitals (21), health centers (48) and clinical laboratories (22) were surveyed to provide information about the management, segregation, generation, storage and disposal of medical wastes. The results about management aspects indicate that practices in most healthcare facilities do not comply with the principles stated in Brazilian legislation. All facilities demonstrated a priority on segregation of infectious-biological wastes. Average generation rates of total and infectious-biological wastes in the hospitals were estimated to be 3.245 and 0.570 kg/bed-day, respectively.

Brazil↗

Effect of vermiculite addition on compost produced from Korean food wastes.

To evaluate the effect of vermiculite addition on composting food wastes from Korean households, food wastes were composted in three small bins to which different additives were added. The following three bins were employed: in Case I, only recycled compost was composted; in Case II, food wastes with recycled compost; and in Case III, food wastes with recycled compost and vermiculite. In the experiment performed for 30 days, it was confirmed that the supplementary addition of vermiculite to the composting mixture did not significantly improve the weight loss rate and the decomposition rate of food wastes. Due to dilution through the use of inorganic vermiculite, the vermiculite addition reduced the organic matter concentration of the composting mixtures. Vermiculite addition did not raise the pH value. Weight losses of roughly 70% were observed based on calculating moisture loss as well as dry food waste loss and not considering additives, while dry food waste loss was 29.4% and 35.8% with and without the addition of vermiculite, respectively. For these experiments, the major portion of the weight loss was the loss of water. The results indicate a need to differentiate between weight loss percentages and decomposition percentages, and a need to indicate if either of these percentages includes or excludes the mass of additives.

Aluminum Silicates↗

Modeling the energy content of combustible ship-scrapping waste at Alang-Sosiya, India, using multiple regression analysis.

Alang-Sosiya is the largest ship-scrapping yard in the world, established in 1982. Every year an average of 171 ships having a mean weight of 2.10 x 10(6)(+/-7.82 x 10(5)) of light dead weight tonnage (LDT) being scrapped. Apart from scrapped metals, this yard generates a massive amount of combustible solid waste in the form of waste wood, plastic, insulation material, paper, glass wool, thermocol pieces (polyurethane foam material), sponge, oiled rope, cotton waste, rubber, etc. In this study multiple regression analysis was used to develop predictive models for energy content of combustible ship-scrapping solid wastes. The scope of work comprised qualitative and quantitative estimation of solid waste samples and performing a sequential selection procedure for isolating variables. Three regression models were developed to correlate the energy content (net calorific values (LHV)) with variables derived from material composition, proximate and ultimate analyses. The performance of these models for this particular waste complies well with the equations developed by other researchers (Dulong, Steuer, Scheurer-Kestner and Bento's) for estimating energy content of municipal solid waste.

Conservation of Energy Resources↗

Removal of batteries from solid waste using trommel separation.

This paper describes the design and testing of a trommel for separation of batteries from solid waste. A trommel is a cylindrical separation device that rotates and performs size separation. It has also been used in areas such as municipal solid waste (MSW) processing, classifying construction and demolition debris, screening mass-burn incinerator ash and compost processing. A trommel has been designed based on size separation to separate household batteries from solid waste, which can then be used as feedstock for alternative applications of solid waste combustion, particularly where the metal content of the product is also a critical parameter, such as the Co-Co process for integrated cement and power production. This trommel has been tested with batches of university office and restaurant wastes against various factors. The recovery efficiency of batteries increases with decreasing inclination angle of the trommel and decreasing rotational speed. A physical characterization of the university solid waste has been performed with a 20-kg sample of the tested waste. It was found that there is a trend of decreasing recovery of batteries with increasing paper composition, and a trend of increasing recovery of batteries with increasing organic materials composition.

Manufactured Materials↗