PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “WASTES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources

Research on solid waste management system: to improve existing situation in Corlu Town of Turkey.

Over the past decades, uncontrolled population growth and rapid urbanization and industrialization have resulted in environmental problems in Corlu Town, Turkey. One of the most important problems is solid waste due to inadequate management practices. Nowadays, increasing public awareness of the environment compels local authorities to define and to adopt new solutions for waste management. This paper presents a general overview of current solid waste management practices in Corlu Town and principles of the recommended municipal solid waste (MSW) management system. In Corlu, 170 tonnes of municipal solid waste are generated each day, or 1.150 kg per capita per day. Approximately one-half of the municipal solid waste generated is organic material and 30% of the MSW consists of recyclable materials. The recommended system deals with maximizing recycling and minimizing landfilling of municipal solid waste, and consists of separation at source, collection, sorting, recycling, composting and sanitary landfilling. This study also analyzed the recommended system with respect to feasibility and economics. To evaluate whether the suggested system is cost effective or not, the operating cost of the recommended system and market prices of recyclable materials were compared, and the results show that the recommended system will reduce required landfill volume up to 27% of compared to the present situation. The profit of the recommended system is estimated to be about 80 million US dollars.

Conservation of Natural Resources↗

A methodology for solid waste characterization based on diminishing marginal returns.

A methodology is developed for estimating the number of waste sorts for characterizing solid wastes into categories based on diminishing minimum incremental information. Convergence in the square of the coefficient of variation with successive waste sorts is used to indicate cost-efficient termination of sampling at substantially reduced numbers of sorts in comparison with existing methodologies. These findings indicate that the numbers of waste sorts beyond that determined using the proposed methodology do not add substantial marginal gains in information and/or reduction in the confidence interval of the estimate. The methodology is demonstrated using waste composition analyses from the Greater Vancouver Regional District where 22 waste sorts are examined. The proposed methodology is simple, and the number of waste sorts can be estimated with a hand-held calculator and utilized in the field.

Confidence Intervals↗

Networking possibilities for waste recycling in Miyagi prefecture, Japan.

Successful case studies for waste recycling in Japan have not been evaluated. The evaluation of economic efficiency and environmental effects were lacking at the time the actual network was established. A waste/resource input/output (I/O) coincidence retrieval system called ZENESYS was developed to examine the usefulness of a waste-exchange network in a nonmanufacturing district. We analyzed data from the Miyagi prefecture, a region without heavy industry. The data were collected from 77 companies using a questionnaire and interviews. A total of 33 possible waste exchange links arose after analysis using ZENESYS. However, these were frail networks that relied heavily on the construction industry. Two waste recycling technologies were selected from the ZENESYS database: reclaiming fuel from waste plastic and making construction materials from bottom ash. Evaluation of the environmental effects and economics of these two technologies showed they were both suitable for the environment, but no profit was made from reclaiming fuel from waste plastics. We concluded that in an area with no heavy industry, it may be difficult to adopt recycling technologies that have high environmental and economic performance. Materials are difficult to circulate among manufacturing industries even if a waste-exchange network exists, and resources are consumed during transportation and recycling.

Conservation of Natural Resources↗

Planning for integrated solid waste management at the industrial park level: a case of Tianjin, China.

Industrial parks play a significant role in the production and use of goods and services. The proper management of solid waste is a major challenge for industrial parks due to the large quantity of wastes and the variability of waste characteristics from these types of developments. Therefore, integrated solid waste management has become very crucial to the industrial park managers. Such an approach requires industrial park managers to assess the overall use of resources, and to seek waste reduction, reuse and recycling opportunities both at the individual company level and among different tenant companies. The adoption of this method can bring both economic and environmental benefits. This paper introduces the planning efforts of a real case in China. It first presents the basic information on Tianjin Economic Development Area (TEDA), and then introduces its current practices on solid waste management. The main focus of this paper is to describe how to plan an integrated solid waste management system at TEDA. Benefits and challenges are all identified and analyzed. The experiences and methods from this case study should be applied in other industrial parks so as to improve the overall eco-efficiency of the whole industrial park.

China↗

Utilization of waste glass in ECO-cement: strength properties and microstructural observations.

Waste glass creates a serious environmental problem, mainly because of the inconsistency of the waste glass streams. The use of waste glass as a finely ground mineral additive (FGMA) in cement is a promising direction for recycling. Based on the method of mechano-chemical activation, a new group of ECO-cements was developed. In ECO-cement, relatively large amounts (up to 70%) of portland cement clinker can be replaced with waste glass. This report examines the effect of waste glass on the microstructure and strength of ECO-cement based materials. Scanning electron microscopy (SEM) investigations were used to observe the changes in the cement hydrates and interface between the cement matrix and waste glass particles. According to the research results, the developed ECO-cement with 50% of waste glass possessed compressive strength properties at a level similar to normal portland cement.

Compressive Strength↗

Minimising waste in the food and drink sector: using the business club approach to facilitate training and organisational development.

The aim of the East Anglian Waste Minimisation in the Food And Drink Industry Project was to develop waste minimisation capability in food and drink sector companies by providing a structured training programme and consultancy support to participating members of a business club. The business club forum provided the structure within which interactive training and development sessions were delivered. Expertise and assistance in implementing waste minimisation and waste management programmes was given to member companies at their sites. The project resulted in pound 1,800,000 per annum of identified savings with pound 1,100,000 of verified savings already achieved. Training and development contributed fundamentally to these project outcomes and achievements. The structured training package used three different approaches or methods. Teaching and workshop sessions were used to present interactive training on waste minimisation practice. These were supplemented by interactive 'report-back' sessions where the 'project champions' presented progress reports to the club on waste minimisation at their sites. An overview of the business club approach is described, together with an account of the successes and challenges of applying a structured training and development programme and the barriers to waste minimisation that were overcome. Training effectiveness was measured according to reaction, learning, application and impact.

Beverages↗

Evaluation of microbial stability of simulated solid and liquid waste forms using a refined biofilm formation method.

A refined biofilm formation method was used to evaluate the stability of a simulated liquid waste form containing a simulated liquid waste (salts) and cement in three different proportions, and a simulated solid waste form containing a simulated solid waste (resin) and cement in three different proportions. The experimental samples of all the simulated liquid waste forms showed evidence of microbial growth on them after 3 days of evaluation as indicated by substantial increase in sulfate production, and exhibited considerable instability to microbial degradation as indicated by substantial leaching of calcium. The experimental samples of all the simulated solid waste forms showed evidence of inhibition of growth of Thiobacillus thiooxidans for about 18 days, after which the growth of the microbe became evident in two out of three. Within the growth inhibition period, the differences between experimental and control samples were minor. After the growth of T. thiooxidans became evident, comparatively higher degradations were observed for the experimental samples of the resin containing solid waste forms.

Acidithiobacillus thiooxidans↗

Prediction of unconfined compressive strength of cement paste containing industrial wastes.

Neural network analysis was used to construct models of unconfined compressive strength (UCS) as a function of mix composition using existing data from literature studies of Portland cement containing real industrial wastes. The models were able to represent the known non-linear dependency of UCS on curing time and water content, and generalised from the literature data to find relationships between UCS and quantities of five waste types. Substantial decreases in UCS were caused by all wastes; except for EAF dust, the effect was nonlinear with the greatest decrease caused initially by approx. 12% plating sludge, 40% foundry dust, 58% other ash, and 72% MSWI fly ash by mass of dry product. It appears that the maximum waste additions used in modelling may approximate the practical limits of waste additions used in modelling may approximate the practical limits of waste addition to Portland cement, i.e., 50% plating sludge or EAF dust, 64% foundry dust, 92% other ash, and 85% MSWI fly ash by mass of dry product. The laboratory was found to be a key predictive variable and acted as a surrogate for laboratory-specific variables related to cement composition, strength and hardening class, product mixing and preparation details, laboratory conditions, and testing details. While the neural network modelling approach has been shown to be feasible, development of better models would require larger data sets with more complete information regarding laboratory-specific variables and waste composition.

Compressive Strength↗

A method for livestock waste management planning in NE Spain.

A method of decision-making on livestock wastes management in areas with nutrient surplus due to high livestock density is applied in Catalonia (NE Spain). Nutrient balance is made considering soil nitrogen application as the limiting factor. Special attention is paid to the centralized treatment option. The method presented consists of: 1. minimizing livestock waste generation (at farm scale) as a step previous to any other, both in amount and limiting components, 2. applying the nitrogen balance method at regional and municipal scale and providing enough storage capacity in order to apply wastes in an agronomically correct way, 3. spatially refining the results of the nitrogen balance by a proposed method that allows precisely pinpointing the hotspots of livestock waste generation, where centralized treatment might be an interesting option, and 4. deciding on the waste treatment objectives, provided that treatments be necessary. Knowledge about the wastes, meeting the interests and merging the efforts of the various actors, as well as an adequate budget are necessary ingredients for the success of any waste management plan.

Animals↗

Integrated decision support system for waste minimization analysis in chemical processes.

The need to build and operate environmentally friendly plants has challenged the chemical industry to consider waste minimization or even elimination starting from the early stages of process development. A thorough waste minimization analysis requires specialized expertise and is laborious, time-consuming, expensive, and knowledge-intensive. This has caused a major technical barrier for implementing waste minimization programswithin the industry. Previously, we had reported a systematic methodology and a knowledge-based system, called ENVOPExpert, for identifying waste minimization opportunities in chemical processes. In this paper, we propose an integrated qualitative-quantitative methodology to identify waste minimization alternatives and assess their efficacy in terms of environmental impact and process economics. A qualitative analysis is first conducted to identify the sources of wastes and to propose alternatives for eliminating or minimizing them. Environmental impact of each alternative is then calculated by doing a quantitative pollutant balance. The capital expenditure required for implementing the alternative and the resulting plant operating costs are also calculated and used in the evaluation of the waste minimization alternatives. Through this, practical and cost-effective options can be identified. This methodology has been implemented as an integrated decision support system and tested using the hydrodealkylation process case study with satisfactory results.

Chemical Industry↗

Incineration of different types of medical wastes: emission factors for particulate matter and heavy metals.

Previously published results for emission factors of medical waste incineration do not include enough information about the incinerated waste composition. This paper reports the first emission factors estimated for particulate matter, As, Cd, Cr, Pb, Mn, Hg, and Ni, considering that medical waste is segregated in different types according to Portuguese legislation. The main purpose was to evaluate the influence of incinerated waste composition and segregation practice on emission factors. One "controlled-air" incinerator without air pollution control devices was used for the incineration either of mixtures with a defined composition or of a specific waste type. Previously published emission factors are not associated with the composition of the incinerated mixture, and the results showed that the usefulness of those emission factors is very doubtful. The existence of different waste classifications also reduces the usefulness of previously published results. To protect human health, appropriate equipment to control atmospheric pollutants must be used, since the legal limits for pollutant concentrations were strongly surpassed (226 times higher than the limit for Hg), with risks for patients and workers of the hospital and exposed population. It was concluded that rigorous segregation practices and adequate management methodologies allow reducing 80% of the amount of wastes that must be incinerated, practically eliminating Hg and Pb emissions and reducing those of PM, As, Cd, Cr, Mn, and Ni, respectively, 98, 90, 92, 84, 77, and 92%.

Air Pollutants↗

Garbage imperialism: health implications of dumping hazardous wastes in Third World countries.

This paper calls for studies of the potential health implications of today's hazardous waste disposal practices, and suggests that such studies are urgently needed in Third World countries where industrial nations are increasingly dumping their unwanted waste materials. The United States produces enormous quantities of hazardous waste each year, and approximately 1,200 "priority hazardous waste sites" presently threaten the nation's health. Because of environmental regulations, landfill closings, and citizen opposition to local waste facilities, industrialized countries are increasingly disposing of their problematic materials by shipping them to the Third World, where they pose substantial threats to human health and the environment. From a political economy perspective, this paper suggests that global health would be better served by reducing hazardous waste production, encouraging reusing and recycling, and restricting or banning international shipment of toxic wastes.

Africa↗

Evaluation of organics leaching from solidified/stabilized hazardous wastes using a powder reactivated carbon additive.

Cement based stabilization/solidification systems have been widely used to minimize leaching of contaminants from hazardous wastes, particularly for stabilization of wastes that contain heavy metals or other inorganic materials. However, few researchers have demonstrated that stabilization/solidification systems can adequately trap and retain organics present in these wastes. Identification of additives that can be used with the inorganic binder to retain organics has attracted much interest. Activated carbon has been found to be the best additive for immobilizing organic contaminants, but it is generally too expensive for routine use. The use of powdered reactivated carbon was studied in this research to prevent organics from leaching from solidified/stabilized waste forms because it is effective and more economically competitive. The Shrinking Unreacted Core leach test method was employed in this study. Stabilization/solidification waste forms were prepared using five organic compounds--phenol, 2-chlorophenol, chlorobenzene, aniline and Methyl Ethyl Ketone (MEK)--that were spiked into the waste forms at two concentration levels each. Reactivated carbon amounts of 0% (as control), 1% and 2% (w/w) were added into each waste form batch to determine how effectively the reactivated carbon can immobilize those organics and the optimum dose of reactivated carbon addition required. Leachate samples were analyzed using gas chromatography. Results show that 1% reactivated carbon addition is generally enough to reduce leaching of all of the organic contaminants by more than 70%, while a 2% addition reduces leaching for most of the organics to less than 1%.

Carbon↗

Cr(VI) removal in acidic aqueous solution using iron-bearing industrial solid wastes and their stabilisation with cement.

In this study, iron-bearing industrial solid wastes iron filings, ETP sludge of steel and red mud of aluminium industries; were used for Cr(VI) removal at pH 3. A complete removal of Cr(VI) was found for initial 10 mg 1(-1) of 100 ml solutions in the presence of 2.5 g iron filings, 8 g ETP sludge and 10 g red mud for up to one hour of shaking at room temperature. After Cr(VI) removal, inclusion of chromium on the reacted iron filing surface was demonstrated by EDAX analysis. Leachability of chromium and iron from the reacted wastes was determined by using Toxicity Characteristics Leaching Procedure (TCLP). This test showed a very low level of leachability of chromium as Cr(III) and iron from the reacted wastes. To minimise their leachability further, Cr(VI)-reacted solid wastes were stabilised with Portland cement in their 3:1 ratio. Leachability tests of stabilised wastes by TCLP indicated a considerable decrease in leachability of chromium and iron compared with the that of reacted wastes alone. To explore the possibility of utilisation in building materials, bricks of cement-mixed Cr(VI)-reacted wastes were made and their comprehensive strength, durability and leachability under immersion conditions were measured.

Aluminum↗

Toxicity of complex waste mixtures: a comparison of observed and predicted lethality.

The ability to predict the biological effect of complex waste mixtures from chemical characterization data was examined by comparing observed mortality to that predicted by a mathematical additivity model with literature LD50 values for the chemicals identified in the mixtures. Male F344 rats were exposed by gavage to 1 of 10 samples of complex industrial waste. Seven of the 10 waste samples caused death within 24 h of administration at dosages ranging from 1 to 5 ml/kg body weight. Two of the 7 lethal waste samples produced 100% mortality at a dosage of 2.5 ml/kg; another 2 waste samples produced 100% mortality at 5 ml/kg. The partial chemical analysis, although providing more extensive information on chemical composition than might normally be available for most complex waste mixtures, was not sufficient to distinguish lethal from nonlethal waste samples or to indicate lethal potency. Possible explanations for the apparent inability to predict readily lethality from the chemical characterization data include the possible inappropriateness of an additivity model due to the presence of interactions, such as synergism or antagonism; the kinetics of chemical absorption, distribution, and elimination, which may be affected by administration of the chemical in a complex matrix; and the presence of unidentified chemicals in the mixture that may have contributed to the observed toxicity.

Animals↗

Increase in body cell mass and decrease in wasting are associated with increasing potency of antiretroviral therapy for HIV infection.

With the advent of potent combination antiretroviral therapy (ART), there has been a reduction in the incidence of wasting. However, few studies have investigated specific body composition changes associated with these treatments. This study aimed to investigate longitudinally the association of increasingly potent ART with changes in body cell mass and wasting utilizing bioelectric impedance analysis (BIA). In this longitudinal cohort study, 159 HIV-positive men were assessed semiannually from 1995 to 1997 for body composition utilizing BIA, CD4 lymphocyte count, HIV viral load, medical and depressive symptoms. Wasting was defined as body cell mass/height below the 90th percentile based on HIV positive norms. ART potency at each visit was scored utilizing published clinical guidelines, ranging from 1 (0-1 antiretrovirals) to 5 (3 or more antiretrovirals including a potent protease inhibitor). Viral resistance testing was not used. The mixed-effects model and the generalized estimating equations approaches were used to determine longitudinal correlates of body cell mass and of wasting, respectively. Over the 2 years of follow-up, potent combination ART use increased from 6% to 79%. Concurrently, a significant increase in mean body cell mass and a reduction in prevalence of wasting were seen, while total body weight, fat mass, and total body water did not change. Increasingly potent ART was associated with significant increases in body cell mass and reduction in wasting. Other significant correlates of increased body cell mass included higher CD4 count and decreased severity of HIV-related symptoms, fatigue and depression. The current study found that higher potency ART taken for relatively short term (2 years) was associated with an increase in body cell mass and a reduction in wasting and that these changes were associated with both medical (CD4, HIV symptoms) and behavioral (fatigue, depression) improvements. One caveat is this study did not distinguish among types of potent ART regimens. Given only some antiretrovirals appear linked to many body composition changes, regardless of their effect on viral load, it may be the type of regimen used that accounted for the relationship seen between viral load and body composition changes.

Adolescent↗

Socioeconomic and demographic factors are associated with worldwide patterns of stunting and wasting of children.

We estimated the variability among nations in the prevalence of stunting and wasting, evaluated which national factors are associated with stunting and wasting and examined the relationship of stunting with wasting. The World Health Organization Global Database on Child Growth, a comprehensive conceptual model and a database of national factors were used with variance components and regression analyses. There was substantial variability among nations and among provinces within nations. Most national variability for stunting (76%) and wasting (66%) was explained by national factors and geographic region. Higher energy availability, female literacy and gross product were the most important factors associated with lower prevalence of stunting. The association of health expenditures and stunting differed by region. Higher immunization rate and, for Asia only, energy availability were the most important factors associated with lower prevalence of wasting. Regional differences in the relationship between stunting and wasting were accounted for by national factors. Some factors associated with stunting and wasting differ at the national level. Child malnutrition within a household is greatly influenced by issues at national and provincial levels, and intervention should be considered at all three levels.

Child Nutritional Physiological Phenomena↗

Drug use inefficiency: a hidden source of wasted health care dollars.

UNLABELLED: A potential area for departmental savings is to minimize inefficient use of pharmaceuticals. We recorded drug waste data for multiple drugs for a fiscal year and surveyed providers' knowledge of departmental drug waste. Six large-cost or large-volume use drugs were chosen for study: thiopental, succinylcholine, rocuronium, atracurium, midazolam, and propofol. Amounts administered to patients were collected for one year by using a computerized anesthesia record keeper. Total drug distributed was the number of vials restocked by pharmacy for the year. An efficiency index, the percent administered to patients, was calculated for each drug. Drug administration to 25,481 patients was analyzed. Drug use efficiency indices were: atracurium 29%; thiopental, 31%; succinylcholine, 33%; propofol, 49%; midazolam, 53%; rocuronium, 61%. The total cost of unadministered study drugs was $165,667, 26% of the expenditure for all drugs. Most dollars wasted were for propofol, $80,863, and thiopental, $32,839. The reason most cited for drug waste was the disposal of full, or partially full, syringes. Drug wastage represents a significant portion of the entire anesthesia drug budget. Waste reduction strategies should allow a portion of the "avoidable" waste to be reduced. IMPLICATIONS: Unadministered drug amounts were measured for six study drugs over one fiscal year and found to be significant; the cost of unadministered drugs totaled $165,667. The reason most cited for waste was disposal of full, or partially full, syringes.

Androstanols↗