PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Biomimetics”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources
PubMed2004

Spontaneously formed monodisperse biomimetic unilamellar vesicles: the effect of charge, dilution, and time.

Using small-angle neutron scattering and dynamic light scattering, we have constructed partial structural phase diagrams of lipid mixtures composed of the phosphatidylcholines dimyristoyl and dihexanoyl doped with calcium ions (Ca2+) and/or the negatively charged lipid, dimyristoyl phosphatidylglycerol (DMPG). For dilute solutions (lipid concentration < or =1 wt %), spontaneously forming unilamellar vesicles (ULVs) were found, and their polydispersity was determined to be approximately 20%. The stability of the Ca2+- or DMPG-doped ULVs was monitored over a period of 4 days and their structural parameters (e.g., average outer radius, ) were found to be insensitive to the lipid concentration (Clp). However, doping the dimyristoyl/dihexanoyl system with both Ca2+ and DMPG resulted in ULVs whose was found to be Clp dependent. The of DMPG-doped ULVs remained unchanged over an extended period of time (at least 4 days), a good indication of their stability.

Calcium↗
PubMed1994

Supported phospholipid/alkanethiol biomimetic membranes: insulating properties.

A novel model lipid bilayer membrane is prepared by the addition of phospholipid vesicles to alkanethiol monolayers on gold. This supported hybrid bilayer membrane is rugged, easily and reproducibly prepared in the absence of organic solvent, and is stable for very long periods of time. We have characterized the insulating characteristics of this membrane by examining the rate of electron transfer and by impedance spectroscopy. Supported hybrid bilayers formed from phospholipids and alkanethiols are pinhole-free and demonstrate measured values of conductivity and resistivity which are within an order of magnitude of that reported for black lipid membranes. Capacitance values suggest a dielectric constant of 2.7 for phospholipid membranes in the absence of organic solvent. The protein toxin, melittin, destroys the insulating capability of the phospholipid layer without significantly altering the bilayer structure. This model membrane will allow the assessment of the effect of lipid membrane perturbants on the insulating properties of natural lipid membranes.

Alkanes↗
PubMed1990

Design and applications of biomimetic anthraquinone dyes. III. Anthraquinone-immobilised C.I. reactive blue 2 analogues and their interaction with horse liver alcohol dehydrogenase and other adenine nucleotide-binding proteins.

C.I. Reactive Blue 2 analogues were bonded onto an agarose support matrix by a novel method which entailed immobilisation by the anthraquinone ring 1-amino group as opposed to the usual triazine ring coupling methods. Dyes with spacer arms attached to the anthraquinone ring 1-amino group were synthesised by reacting methoxytriazine analogues of C.I. Reactive Blue 2 with chloroacetyl chloride and ethylenediamine. Unlike the blue parent dyes, all C.I. Reactive Blue 2 analogues with derivatised anthraquinone ring 1-amino groups were of a characteristic red colour. This change of chromaticity was entirely expected since the anthraquinone ring 1-amino group is an important component of the C.I. Reactive Blue 2 chromophore. Chromatographic studies indicated that, in comparison to adsorbents comprising triazine ring-immobilised dyes, adsorbents formed from C.I. Reactive Blue 2 analogues immobilised by the anthraquinone ring were better suited to the isolation of horse liver alcohol dehydrogenase and other adenine nucleotide-requiring enzymes. Similarities between C.I. Reactive Blue 2 analogues immobilised by the anthraquinone ring and N6-(6-aminohexyl)adenine nucleotide derivatives could be identified which may account for these observations. These studies confirm that highly effective affinity ligands based on synthetic textile dyes can be designed in a rational manner.

Adenine Nucleotides↗
PubMed1989

Design and applications of biomimetic anthraquinone dyes. Purification of calf intestinal alkaline phosphatase with immobilised terminal ring analogues of C.I. reactive blue 2.

A 330-fold one-step purification of alkaline phosphatase from a crude calf intestinal extract has been achieved using specific elution with inorganic phosphate (5 mM) from a purpose designed adsorbent comprising a terminal ring phosphonate analogue of C.I. Reactive Blue 2 coupled to Sepharose CL-6B-200. The resulting alkaline phosphatase preparation displayed a specific activity in excess of 1000 U/mg and was of equivalent purity to commercial "high purity" preparations as deduced by sodium dodecyl sulphate polyacrylamide gel electrophoresis and specific activity comparisons.

Alkaline Phosphatase↗
PubMed1998

Synthesis and purification of hydrophobic peptides for use in biomimetic ion channels.

The synthesis and subsequent purification of several hydrophobic peptides is described. These peptides include the 24-residue M3 transmembrane domain of the rat connexin 32 protein, a peptide sequence that contains only seven amino acids with hydrophilic side-chains (71% hydrophobic). Moreover, for comparison, a much smaller hydrophobic octapeptide, designed to exist with alpha-helical secondary structure, was also studied. Optimum conditions for the RP-HPLC purification of these peptides was dependent on peptide length and solubility properties.

Amino Acid Sequence↗
PubMed2001

Poly(L-lysine)-GRGDS as a biomimetic surface modifier for poly(lactic acid).

The immobilization of adhesion peptide sequences (such as RGD) at the surfaces of poly(alpha-hydroxyacid)s, including poly(lactic acid) (PLA), is complicated by an absence of functional groups to support covalent attachment. We demonstrate a method to overcome this problem, by attaching the peptide to poly(L-lysine) (PLL), which immobilizes the sequence through adsorption at the poly(alpha-hydroxyacid) surface. When coated using a 0.01% w/v solution of PLL-GRGDS, bovine aortic endothelial cells seeded upon the modified PLA showed a marked increase in spreading over unmodified PLA. However, inhibition of the cell-spreading effect occurred when using higher concentrations of PLL-GRGDS, which we attribute to the PLL component. This inhibitory effect can be challenged by increasing the amount of GRGDS attached to each PLL molecule. Potentially, this is a flexible method of surface modification that can engineer many different types of tissue engineering scaffolds with a variety of biomolecules, thus allowing initial cell adhesion to be controlled.

Animals↗
PubMed2001

In vivo modulation of host response and macrophage behavior by polymer networks grafted with fibronectin-derived biomimetic oligopeptides: the role of RGD and PHSRN domains.

Polymorphonuclear leukocytes, monocytes/macrophages, foreign body giant cells (FBGC), and lymphocytes are central in directing the host foreign body and inflammatory/immune reactions that impact material biostability, biocompatibility, and device efficacy. We employed the functional architecture of fibronectin to probe the mechanisms of protein-cell interaction in modulating leukocyte behavior. We demonstrated previously that the RGD and PHSRN domain of fibronectin and the spatial orientation between the motifs were crucial in regulating macrophage function in vitro. The current study delineates the role of RGD and PHSRN in modulating the host inflammatory response and macrophage behavior in vivo. Oligopeptides containing RGD and/or PHSRN domains were grafted onto a polyethyleneglycol-based substrate and subcutaneously cage implanted into rats. Peptide identity played a minimal role in modulating the host inflammatory response and adherent macrophage density. The RGD motif, either alone or at the terminal position with the PHSRN-containing flanking sequence, elicited a rapid macrophage fusion to form FBGCs at the early stage of implantation. Both the RGD motif and the PHSRN motif were important in mediating FBGC formation at the later implantation time. However, the PHSRN motif, specifically in the configuration of G3 RGDG6 PHSRNG, evoked a larger extent of FBGC coverage. Our results indicate the importance of RGD and PHSRN in modulating macrophage function in a time and orientation dependent fashion in vivo.

Amino Acid Sequence↗
PubMed2002

In situ crosslinking of a biomimetic peptide-PEG hydrogel via thermally triggered activation of factor XIII.

There is a medical need for robust, biocompatible hydrogels that can be rapidly crosslinked in situ through the use of gentle and non-toxic triggers, which could be used as a surgical adhesive, a bone-inductive material, or for drug and gene delivery. The complete gelation system described here includes calcium-loaded liposomes, hrFactor XIII. thrombin, and an enzymatic substrate based on a four-armed PEG in which each arm terminates with a 20mer peptide sequence derived from the gamma-chain of fibrin. Controlled release of calcium ions for efficient hrFXIII activation was accomplished by thermal triggering of a tailored liposome phase transition at 37 degrees C, which allowed the entire gelation system to be stored in aqueous solution at room temperature without premature gelation. When the system temperature was raised to 37 degrees C (body temperature), the released calcium activates the hrFactor XIII, and gelation was observed to occur within 9 min. Rheological studies performed to quantitatively determine the storage modulus (G') of the gel during oscillatory shear show that it behaves as a robust, elastic solid. Scanning electron microscopy studies revealed the hydrogel to have a very dense morphology overall, however spherical voids are observed in regions where calcium-loaded liposomes were entrapped during gelation.

Biocompatible Materials↗
PubMed2003

Biomimetic surface modification of poly(L-lactic acid) with chitosan and its effects on articular chondrocytes in vitro.

The objective of this study was to investigate the efficiency of two treatments for poly(L-lactic acid) (PLLA) surface modification with chitosan, via entrapment and coupling by using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide and N-hydroxysuccinimide. The properties of original PLLA films, chitosan-entrapped and coupled PLLA films were investigated by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). The contact angle indicated the change in hydrophilicity and the ESCA data suggested that the modified PLLA films became enriched with nitrogen atoms. The cytocompatibility of modified PLLA films might be improved. Therefore, the attachment and proliferation of bovine articular chondrocyte seeded on modified PLLA films and control one were examined. A whole cell enzyme-linked immunosorbent assay (Cell ELISA) that detects the BrdU incorporation during DNA synthesis and collagen type II secretion was applied to evaluate the chondrocytes on different PLLA films and tissue culture plates. Cell viability was estimated by the MTT assay and cell function were assessed by measuring sulfated glycosaminoglycan secreted by chondrocytes. These results implied that chitosan used to modify PLLA surface through entrapment and coupling could enhance the chondrocyte adhesion, proliferation and function.

Animals↗
PubMed2004

Biomimetic nucleation and growth of CaCO3 in hydrogels incorporating carboxylate groups.

Poly-acrylamide hydrogels were modified by copolymerization with acrylic acid and used as growth medium for CaCO3 in a double-diffusion arrangement. The carboxylate functionalities in the gel network facilitate the nucleation of a multitude of small crystallites of vaterite and calcite, which are temporarily stabilized even while supersaturation is increasing within the hydrogel. After an extended induction period the rapid spherulitic growth of calcite crystals along their c-axis is observed yielding spheres with diameters exceeding 300 microm. In the center of those aggregates disordered, porous regions can be identified as starting point of this rapid crystallization. The results are compared to previous studies on native poly-acrylamide hydrogels and networks modified with -SO(3)H functional groups. The mineralization mechanism is significantly altered by specific interactions between the -COOH functionalized network and the evolving mineral phase.

Calcium Carbonate↗
PubMed1999

Porous calcium phosphate coating over phosphorylated chitosan film by a biomimetic method.

A porous calcium phosphate coating deposited on chitosan films was studied using scanning electron microscopy, energy-dispersive X-ray analysis, micro-Fourier transform infrared spectroscopy (micro-FTIR) and thin-film X-ray diffractometry (XRD). Chitosan films were first prepared by dissolving chitosan powder in dilute acetic acid and drying in a flat petri dish. The films were phosphorylated using urea and H3PO4 with the P content being 0.1-0.2 wt%. Phosphorylated films soaked in saturated Ca(OH)2 solution for 8 days led to the formation of a calcium phosphate precursor phase over the entire surface. This precursor phase stimulated the growth of a porous coating of calcium-deficient hydroxy apatite when immersed in 1.5 x SBF for more than 20 days. Phosphorylated films not treated with Ca(OH)2 did not show any calcium phosphate growth upon immersion in SBF solution. The precursor phase is thought to be octacalcium phosphate, which nucleates a HAP phase during SBF treatment. Initially, this treatment in SBF results in the formation of a single-layer calcium phosphate particles over the film surface. As immersion time in SBF increases, further nucleation and growth produce a porous HAP coating. The Ca/P ratio of the HAP coating is a function of SBF immersion time.

Absorptiometry, Photon↗
PubMed1999

Evaluation of protein-modulated macrophage behavior on biomaterials: designing biomimetic materials for cellular engineering.

Macrophage is a central cell type in directing host inflammatory and immune processes; hence, its response to biomaterials (i.e. adhesion and giant cell formation) has a direct impact on material biostability and biocompatibility. In this paper, several in vitro and in vivo techniques from previously published results and current investigations are highlighted and presented to demonstrate means of delineating a part of the complex molecular mechanisms involved in the interaction between biomaterials and macrophages. Complement component C3 was found critical in mediating the initial adhesion of human macrophages on medical-grade polyetherurethaneureas. From radioimmunoassay studies, the presence of a diphenolic antioxidant additive in polyetherurethaneureas increased the propensity for complement upregulation but did not affect adherent macrophage density. The subcutaneous cage-implant system was utilized to confirm the role of interleukin-4 in the fusion of adherent macrophages to form foreign body giant cells on polyurethanes in vivo. To probe the function-structural relationship of macrophage-active proteins, fibronectin was employed as a model in the formulation of synthetic oligopeptide mimetics. Peptides were grafted onto previously developed, non-cell adhesive polyethyleneglycol-based networks. The results indicate that grafted tripeptide RGD sequence supported higher adherent macrophage density than surfaces grafted with other peptides such as PHSRN and PRRARV sequences. However, the formation of foreign body giant cells on peptide-grafted networks was highly dependent on the relative orientation between PHSRN and RGD sequences located in a single peptide.

Biocompatible Materials↗
PubMed2002

Biomimetic hydrolytic activation by Fe(III) aggregates: structures, reactivity and properties of novel oxo-bridged iron complexes.

The tetranuclear aggregate (enH(2))[Fe(4)(mu(3)-O)(heidi)(4)(mu-O,O'-O(2)CNHC(2)H(4)NH(3))] x 4H(2)O contains a novel bidentate zwitterionic carbamic acid ligand. Magnetic studies indicate that the unsymmetrical Fe(4) core is ferrimagnetic with an S=4 ground state. Similar ligands have been obtained on rectangular tetranuclear aggregates [M(4)(mu-O)(mu-OH)(hpdta)(2)(mu-X)(2)](n-) (M[double bond]Fe, Al, Ga). The carbamic acid ligands are considered to result from the hydrolytic activation (fixation) of atmospheric CO(2) by the aggregate precursor to give a carbonato intermediate, which then reacts with the organic diamine used as base in the synthesis. Similar aggregates with acetate ligands result from hydrolytic activation of the DMA used as cosolvent. Closely related mechanisms for these two activation processes are proposed, which are also related to the accepted mechanisms for carbonic anhydrase and urease.

Journal Article↗
PubMed2003

Efficient biomimetic catalytic epoxidation of polyene polymers by manganese porphyrins.

Two polyene polymers, cis-polybutadiene and cis-polyisoprene, were transformed into polyepoxides under mild conditions. The epoxidation of these two polyene polymers is stereospecific, giving cis-epoxides as products. All factors controlling the reaction rate, such as the nature of the catalyst, the oxygen donor and the presence of bases as axial ligands, were studied. The optimum results were obtained when iodosylbenzene was used as the oxygen donor, Mn(TpFPP)Cl as the catalyst and imidazole as the axial ligand. Under these optimum conditions the turnover number was found to be 71. These results render this system promising for the epoxidation of polyene polymers in a more general way.

Catalysis↗
PubMed1999

Generation and biomimetic chemistry of tungsten-dithiolene complexes containing the hydrotris(3,5-dimethylpyrazol-1-yl)borate ligand.

Reactions of bis(thio)-W(VI) complexes, LWS2X (L = hydrotris (3,5-dimethylpyrazol-1-yl)borate, X = monoanion), with alkynes produce dithiolene complexes, LWX(dithiolene). The synthesis and characterization of orange LW(OPh){S2C2(CO2Me)2} (1) and burgundyred LW(SePh) {S2C2(Ph)(2-quinoxalinyl)} (2) and the X-ray crystal structure of 1.0.5CH2Cl2, are described in detail. Crystals of 1.0.5CH2Cl2 are orthorhombic, space group Pbcn, with a = 29.826(6), b = 13.291(4), c = 16.078(4) A, V = 6373(5) A3, and Z = 8. The six-coordinate, distorted-octahedral complex features a tridentate L ligand, a monodentate phenoxide ligand, and a bidentate dithiolene ligand. The short W-S bonds (2.267(4) and 2.279(4) A) and the parameters associated with the phenoxide ligand (W-O = 1.850(8) A, W-O-C = 146(1) degree), point to a considerable degree of W-ligand multiple bonding in the [W(OPh)(dithiolene)]+ unit. For 2, W-Se and average W-S distances of 2.49(2) A and 2.30(2) A, respectively, have been obtained from EXAFS studies. The formation of yellow 3,3'-dithiobis[2-(phenyl)thieno[2,3-b]quinoxaline] (3) upon oxidation of 2 supports the likely generation of urothione upon oxidative degradation of molybdopterin-containing tungsten enzymes from hyperthermophilic organisms.

Boric Acids↗
PubMed2000

Design and synthesis of new biomimetic materials.

In this paper, it is reported that the histidine-silane derivative Boc-His(Boc)-CONH-(CH2)3Si(OEt)3 can be polymerized via the sol-gel method or can be grafted on a silica surface. The obtained organosilicas bear histidine molecules covalently bonded on the inorganic matrix. Their Cu(II) complexes have been evaluated as oxidation catalysts for the conversion of 3,5-di-tert-butylcatechol (DTBC) to 3,5-di-tert-butylquinone (DTBQ) in the presence of dioxygen.

Catalysis↗