PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Conditioning, Operant”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources
PubMed1987

The influence of colour on CRT reading performance and subjective comfort under operational conditions.

Performance and reports of comfort when proof-reading text displayed on a CRT were investigated as a function of the text/background colour. Luminances were those typically produced by commercially available hardware and software, and task conditions were designed to simulate those experienced by typical users. Colours from the extremes of the spectrum (red, blue) were shown to produce poorer reading performance, higher ratings of discomfort and a higher incidence of reported symptoms of discomfort than those from mid-spectrum and white stimulus conditions.

Journal Article↗
PubMed2005

An assessment of the suitable operating conditions for the CeO2/gamma-Al2O3 catalyzed wet air oxidation of phenol.

It has been shown that the CeO2/gamma-Al2O3 catalyst is a feasible alternative to CeO2 for the catalytic wet air oxidation (CWAO) of phenol because it remains an effective catalyst and yet is cheaper to prepare. In this study, we found that the optimal cerium content in the CeO2/gamma-Al2O3 catalyst was 20 wt.%, regardless of catalyst loading. Furthermore, at 180 degrees C, with a phenol concentration of 1000 mg l(-1), and an O2 partial pressure of 1.0M Pa or 1.5M Pa, the optimal catalyst loading was 3.0 gl (-1). The efficacy of CWAO of phenol improved with O2 partial pressure, although the effects of O2 pressure were more significant between 0.5 MPa and 1.5 MPa than between 1.5 MPa and 2.0 MPa. After 2 h of reaction, approximately 100% phenol conversion and 80% total organic carbon (TOC) removal was recorded at 180 degrees C, 1000 mg l(-1) of phenol and 3.0 g l(-1) of catalyst. Because these percentages subsequently leveled off, it is suggested that 2 h is a suitable time over which to run the reaction. The efficacy of CWAO of phenol decreased as initial phenol concentration was raised (from 400 to 2500 mg l(-1)), with the exception of phenol conversion after about 2 h, for which 400 mg l(-1) produced the lowest phenol conversion figure. Higher phenol concentrations require both catalyst loading and O2 partial pressure to be increased to maintain high performance. For example, for 2000 mg l(-1) and 2500 mg l(-1) phenol, nearly 100% phenol conversion and 90% TOC removal after 4 h of reaction at 180 degrees C required 4.0 g l(-1) of catalyst and 2.0 MPa.

Air↗
PubMed2005

Effects of combustion and operating conditions on PCDD/PCDF emissions from power boilers burning salt-laden wood waste.

This paper discusses the effects of combustion conditions on PCDD/PCDF emissions from pulp and paper power boilers burning salt-laden wood waste. We found no correlation between PCDD/PCDF emissions and carbon monoxide emissions. A good correlation was, however, observed between PCDD/PCDF emissions and the concentration of stack polynuclear aromatic hydrocarbons (PAHs) in the absence of TDF addition. Thus, poor combustion conditions responsible for the formation of products of incomplete combustion (PICs), such as PAHs and PCDD/PCDF precursors, increase PCDD/PCDF emissions. PAH concentrations increased with higher boiler load and/or low oxygen concentrations at the boiler exit, probably because of lower available residence times and insufficient excess air. Our findings are consistent with the current understanding that high ash carbon content generally favours heterogeneous reactions leading to either de novo synthesis of PCDD/PCDFs or their direct formation from precursors. We also found that, in grate-fired boilers, a linear increase in the grate/lower furnace temperature produces an exponential decrease in PCDD/PCDF emissions. Although the extent of this effect appears to be mill-specific, particularly at low temperatures, the results indicate that increasing the combustion temperature may decrease PCDD/PCDF emissions. It must be noted, however, that there are other variables, such as elevated ESP and stack temperatures, a high hog salt content, the presence of large amounts of PICs and a high Cl/S ratio, which contribute to higher PCDD/PCDFs emissions. Therefore, higher combustion temperatures, by themselves, will not necessarily result in low PCDD/PCDFs emissions.

Air Pollutants↗
PubMed2006

Determination of optimum operating conditions for industrial dye wastewater treatment using adaptive heuristic criticism pH control.

For a pilot-scale application, pH control in the treatment of highly contaminated dye industrial wastewater containing metallic compounds as the main pollutants has been investigated with a method using adaptive heuristic criticism control (AHCC). Subsequent experimentation on between 12 and 18 l of the wastewater was carried out using statistical experimental design methodology to evaluate the effects of three critical factors: slaked lime (calcium hydroxide, Ca(OH)(2)) concentration, iron chloride (FeCl(3)) concentration and wastewater volume. With these critical factors, the wastewater treatment process is modeled as an appropriate quadratic cost function of the turbidity of the clarified water. The model is optimized with Rosenbrock's method. Response surface topology of the wastewater treatment is given in terms of optimal concentrations of lime water and FeCl(3) and optimal wastewater volume at pH 11.

Coloring Agents↗
PubMed2006

Bioremediation of endosulfan contaminated soil and water -- optimization of operating conditions in laboratory scale reactors.

A mixed bacterial culture consisted of Staphylococcus sp., Bacillus circulans-I and -II has been enriched from contaminated soil collected from the vicinity of an endosulfan processing industry. The degradation of endosulfan by mixed bacterial culture was studied in aerobic and facultative anaerobic conditions via batch experiments with an initial endosulfan concentration of 50mg/L. After 3 weeks of incubation, mixed bacterial culture was able to degrade 71.58+/-0.2% and 75.88+/-0.2% of endosulfan in aerobic and facultative anaerobic conditions, respectively. The addition of external carbon (dextrose) increased the endosulfan degradation in both the conditions. The optimal dextrose concentration and inoculum size was estimated as 1g/L and 75mg/L, respectively. The pH of the system has significant effect on endosulfan degradation. The degradation of alpha endosulfan was more compared to beta endosulfan in all the experiments. Endosulfan biodegradation in soil was evaluated by miniature and bench scale soil reactors. The soils used for the biodegradation experiments were identified as clayey soil (CL, lean clay with sand), red soil (GM, silty gravel with sand), sandy soil (SM, silty sand with gravel) and composted soil (PT, peat) as per ASTM (American society for testing and materials) standards. Endosulfan degradation efficiency in miniature soil reactors were in the order of sandy soil followed by red soil, composted soil and clayey soil in both aerobic and anaerobic conditions. In bench scale soil reactors, endosulfan degradation was observed more in the bottom layers. After 4 weeks, maximum endosulfan degradation efficiency of 95.48+/-0.17% was observed in red soil reactor where as in composted soil-I (moisture 38+/-1%) and composted soil-II (moisture 45+/-1%) it was 96.03+/-0.23% and 94.84+/-0.19%, respectively. The high moisture content in compost soil reactor-II increased the endosulfan concentration in the leachate. Known intermediate metabolites of endosulfan were absent in all the above degradation studies.

Bacillus↗
PubMed2006

Study of the operational conditions for anaerobic digestion of urban solid wastes.

This paper describes an experimental evaluation of anaerobic digestion technology as an option for the management of organic solid waste in developing countries. As raw material, a real and heterogeneous organic waste from urban solid wastes was used. In the first experimental phase, seed selection was achieved through an evaluation of three different anaerobic sludges coming from wastewater treatment plants. The methanization potential of these sludges was assessed in three different batch digesters of 500 mL, at two temperature levels. The results showed that by increasing the temperature to 15 degrees C above room temperature, the methane production increases to three times. So, the best results were obtained in the digester fed with a mixed sludge, working at mesophilic conditions (38-40 degrees C). Then, this selected seed was used at the next experimental phase, testing at different digestion times (DT) of 25, 20 and 18 days in a bigger batch digester of 20 L with a reaction volume of 13 L. The conversion rates were registered at the lowest DT (18 days), reaching 44.9 L/kg(-1) of wet wasteday(-1). Moreover, DT also has a strong influence over COD removal, because there is a direct relationship between solids removal inside the reactor and DT.

Animals↗
PubMed2002

Use of full-column imaging capillary isoelectric focusing for the rapid determination of the operating conditions in the preparative-scale continuous free-flow isoelectric focusing separation of enantiomers.

A rapid, simple method is proposed here for the identification of the experimental conditions that lead to satisfactory preparative-scale isoelectric focusing enantiomer separations in continuous free-flow electrophoretic units. The method first calls for the use of a commercially available, full-column imaging capillary electrophoretic system to find the background electrolyte composition that generates the largest pI difference between the bands of the enantiomers. The method then calls for the finding of the minimum residence time that permits full development of the pH gradient across the separation chamber of the continuous free-flow electrophoretic unit by measuring the pH in the sample-free carrier electrolyte fractions collected during these runs. Finally, the quality of the predicted preparative-scale separation is verified by analyzing the enantiomer-containing collected fractions by capillary electrophoresis using a 14-sulfated, single-isomer cyclodextrin as resolving agent. The pI difference values and production rate values observed in this work agree well with the literature values that were obtained by much more time-consuming methods.

Isoelectric Focusing↗
PubMed1998

Capillary zone electrophoresis at subzero temperatures. III. Operating conditions and separation efficiency.

The advantages of carrying out capillary zone electrophoresis at subambient rather than ambient temperatures are examined. They include the possibility of using higher electric field strength and/or buffer concentration as well as wider capillary lumen without untoward effects of Joule heating on the separation. Furthermore, the separation efficiency is enhanced as molecular diffusivity decreases with temperature. A Beckman P/ACE unit with an auxiliary cooling system was used at temperatures down to -20 degrees C and, based on the dependence of axial temperature gradient on the capillary length and the temperature of the coolant, an average capillary temperature was defined. The day-to-day migration times of proteins were reproducible with an R.S.D. better than 2.3%. The improvements in the separation efficiency upon lowering the temperature from 40 to 1 degree C are illustrated by the electropherograms of four closely related peptides. Generally, the plate efficiency is enhanced at low temperatures and the analysis time is prolonged due to the increased viscosity. However, the current at a fixed electric field also decreases with temperature and the capillary can be shortened to speed up the analysis. With benzenesulfonic acids, the rate of the generation of theoretical plates was two- to three-times higher using a 27 cm long capillary at -15 degrees C than a 47 cm long capillary at 40 degrees C. By using a 180 microns instead of a 50 microns I.D. capillary for the separation of the four peptides, the sample loading could be increased about 15 times without loss of resolution. In the capillary zone electrophoresis of proteins, it was found that protein interactions with the capillary wall can be significantly reduced by increasing buffer concentration at low temperatures where salt mediated hydrophobic interactions are attenuated. This is illustrated by the separation of beta-lactoglobulins A and B in a raw fused-silica capillary using 400 mM sodium borate buffer, pH 8.4. The results suggest that at subambient or even subzero temperatures, the scope of CZE can be extended by several ways so that the benefits are great enough to justify the use of a cooling system and temperature control appropriate for psychroelectrophoresis with fused-silica capillaries.

Buffers↗
PubMed2003

Kinetic modeling of a mixed culture of Pseudomonas denitrificans and Bacillus subtilis under aerobic and anoxic operating conditions.

The kinetics of biological denitrification have been studied and several models, with varying degree of complexity, to be used for design purposes have been presented in the recent years. However, most of these kinetic studies were performed with mixed (and not well defined) microbial systems, such as activated sludge. In the present work, kinetic experiments were carried out in order to study the dynamic characteristics of a defined mixed culture of the denitrifiers Pseudomonas denitrificans and Bacillus subtilis under anoxic and aerobic conditions in a defined synthetic medium involving a mixture of organic substrates, in the presence of nitrates and/or nitrites. Denitrification was assumed to occur by the consecutive reduction of nitrates to nitrites and then to nitrogen gas without accumulation of intermediate gaseous products. The behavior of these defined mixed cultures was predicted using a kinetic model based on the kinetic models that have already been developed for each bacterium separately and the predictions were compared with the results from mixed culture experiments. The overall mathematical model that was developed and validated in the present work is capable of describing the behavior of the mixed culture in the above conditions, i.e. the nitrates and nitrites reduction kinetics, the cell growth, and the organic carbon utilization rates.

Bacillus subtilis↗
PubMed1998

Electropolymerization of pyrrole and immobilization of glucose oxidase in a flow system: influence of the operating conditions on analytical performance.

The in situ potentiostatic electropolymerization of pyrrole (Py) on a Pt electrode in a thin-layer amperometric cell and the entrapment of the enzyme glucose oxidase (GOx) for the determination of glucose are reported. Polypyrrole (PPy) is directly formed by continuous passage of a buffered solution of the monomer (0.4 M) and enzyme (250 U mL-1) at pH 7 at a flow rate of 0.05-0.1 mL min-1 under a constant applied potential of +0.85 V vs Ag/AgCl decreases. The electrosynthesis of PPy by injection of 500 microL of a Py + GOx solution in a carrier electrolyte consisting of 0.05 M phosphate buffer and 0.1 M KCl at pH 7.0 was also assayed. The influence of the electropolymerization conditions on the analytical response of the sensor to glucose was investigated. The analytical performance of the PPy/GOx sensor was also studied in terms of durability and storage life, as well as selectivity against electroactive species such as ascorbic acid and uric acid as a function of the thickness of the polymer film formed.

Electrochemistry↗
PubMed2001

Influence of the operating conditions in the acetone pulping of wheat straw on the properties of the resulting paper sheets.

A central composite factor design was used to examine the influence of independent variables in the acetone pulping of wheat straw (processing temperature, time, and acetone concentration) on the yield of the resulting pulp, and on various physical properties of paper sheets (breaking length, stretch, burst index, tear index and brightness) obtained from it. Equations that related each dependent variable to the different independent variables were obtained, and these reproduced the experimental results for the yield, breaking, stretch, burst index and brightness obtained at temperatures, times, and acetone concentratons over the ranges 140-180 degrees C, 60-120 min and 40-80%, respectively, with errors less than 20%. Obtaining the optimum breakinig length, stretch, burst index and tear index for the paper sheets (3,456 m, 1.42%, 1.36 kN/g and 3.86 mNm2/g, respectively) entails using a high temperature; the processing time and acetone concentration only influence stretch, optimization of which requires using a short time and a low concentration. The optimum brightness (30.44%) is achieved with a low temperature, a short time and a medium acetone concentration. In order to minimize losses of solvent during its recovery and recycling while ensuring acceptable levels of the properties of the paper sheets, a high temperature, a low acetone concentration and a short time can be used; the brightness level thus obtained is only 10% lower than the optimum value.

Acetone↗
PubMed1979

The influence of operating conditions of activated-sludge treatment on the behaviour of f2 coliphage.

The behaviour of f2 coliphage during activated-sludge treatment was influenced by the temperature, flow-through-time, concentration of mixed liquor suspended solids and the virus load. The most sensitive way to detect behavioural changes was to examine the regression coefficients for the rate of uptake or loss of virus by the mixed liquor solids. This type of analysis revealed, for instance, high values when the solids concentration was high and even greater values occurred when high inocula were used. At high temperature the rate of loss of virus titre after inoculation had stopped was greater than the rate of uptake of virus during inoculation although in all other conditions uptake occurred at a greater rate than the loss of virus. The coefficients were relatively low when the flow rate was increased, when the temperature was low or when the inoculum was small. The distribution of virus between the solids and liquid fractions of the mixed liquor varied somewhat for all conditions but was notably different when (a) the plant was incubated at 5 degrees C when there was much less virus in the solids fraction than usual, and (b) when the inoculum was low and a much higher proportion of virus was found in the solids. The efficiency with which virus was removed across the plant was the least-sensitive determinant of viral behaviour and the value was about the same for most treatment conditions. However, low or high inocula did result in some increased or decreased removal of virus, respectively.

Coliphages↗
PubMed2006

Calcium copper-titanate thin film growth: tailoring of the operational conditions through nanocharacterization and substrate nature effects.

A novel approach based on a molten multicomponent precursor source has been applied for the MOCVD fabrication of high-quality CaCu(3)Ti(4)O(12) (CCTO) thin films on various substrates. The adopted in situ strategy involves a molten mixture consisting of Ca(hfa)(2).tetraglyme, Ti(tmhd)(2)(O-iPr)(2), and Cu(tmhd)(2) [Hhfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedione; tetraglyme = 2,5,8,11,14-pentaoxapentadecane; Htmhd = 2,2,6,6-tetramethyl-3,5-heptandione; O-iPr = isopropoxide] precursors. Film structural and morphological characterizations have been carried out by several techniques [X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM)], and in particular the energy filtered TEM mapping and X-ray energy dispersive (EDX) analysis in TEM mode provided a suitable correlation between nanostructural properties of CCTO films and deposition conditions and/or the substrate nature. Correlation between the nanostructure and optical/dielectric properties has been investigated exploiting spectroscopic ellipsometry.

Journal Article↗
PubMed2001

Function word repetitions emerge when speakers are operantly conditioned to reduce frequency of silent pauses.

Beattie and Bradbury (1979) reported a study in which, in one condition, they punished speakers when they produced silent pauses (by lighting a light they were supposed to keep switched off). They found speakers were able to reduce silent pauses and that this was not achieved at the expense of reduced overall speech rate. They reported an unexpected increase in word repetition rate. A recent theory proposed by Howell, Au-Yeung, and Sackin (1999) predicts that the change in word repetition rate will occur on function, not content words. This hypothesis is tested and confirmed. The results are used to assess the theory and to consider practical applications of this conditioning procedure.

Adult↗