SEARCH · PubMed Health

Results for “Dentin”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources

PubMed1990

Effect of thermal stress on dentin adhesives used individually and in combination.

Polymerization shrinkage remains an inherent problem in composite restorations. Dentin adhesives generally improve bonding to dentin but do not consistently provide leak-free restorations. This study evaluated a dentin adhesive that bonds to dentinal calcium and another that bonds to dentinal collagen when used separately and in combination. The measurement of contraction gaps at the restoration-dentin interface was used as the means of testing the effectiveness of dentin adhesion. The effect of thermal stress on the dentin-polymer bond was also investigated. Results showed that the bisphenyl A glycidyl methacrylate (BISGMA)-based dentin adhesive was more effective when compared with the hydroxyethyl methacrylate (HEMA)-based adhesive. When used in combination, the mean contraction gaps of cavities were not found to be significantly better than those treated with only the BISGMA-based adhesive. Thermal stress reduced the effectiveness of dentin adhesives whether applied individually or in combination.

Composite Resins↗

PubMed2005

Effects of aging on the mechanical behavior of human dentin.

An experimental study on the mechanical behavior of human dentin and the influence of age was conducted. Beams with rectangular cross-section were sectioned from the coronal dentin of virgin extracted molars (N = 76) that were obtained from (N = 70) patients between 17 and 80 years of age. The beams were loaded in either quasi-static 4-point flexure or 4-point flexural fatigue to failure and the stiffness, strength and fatigue properties were evaluated. In characterizing the fatigue response the beams were divided into two age groups that were regarded as young (17 < or = age < or = 30, mean +/- std. dev. = 25 +/- 5 years) and old (50 < or = age < or = 80, mean +/- std. dev. = 64 +/- 9 years) dentin. Results from monotonic loading showed that both the flexural strength and strain to fracture of dentin decreased significantly with age. The fatigue life of dentin increased with a reduction in cyclic stress amplitude and the fatigue strength of young dentin was greater than that of old dentin at all cyclic stress amplitudes. The endurance strength of young dentin (at 10(7) cycles) was approximately 44 MPa, whereas the old dentin exhibited an endurance strength of approximately 23 MPa. Based on differences in the mechanical behavior and microscopic features of the fracture surfaces from the young and old specimens, aging appears to result in an increase in both the rate of damage initiation and propagation in dentin.

Adolescent↗

PubMed2006

The effect of calcium hydroxide on solubilisation of bio-active dentine matrix components.

Calcium hydroxide (Ca(OH)(2)) has been used extensively to induce dentine regeneration through formation of dentine bridges at sites of pulp exposure after dental tissue injury, however, the biological processes underpinning these events are unclear. We hypothesise that growth factors and other bio-active molecules, sequestered within dentine matrix, may be released by the action of Ca(OH)(2) and signal gene expression in pulp cells, which mediates the changes in cell behaviour observed during regeneration. Powdered sound, human dentine samples were extracted with either 0.02 m Ca(OH)(2), pH 11.7 or 10% EDTA, pH 7.2 ( a control known extractant of bio-active and other ECM molecules from dentine) over a 14-day period. Extracts were compared for non-collagenous protein (NCP) and glycosaminoglycan (GAG) content using dye binding assays and protein compositions were analysed by 1D-polyacrylamide gel electrophoresis (1D-PAGE) and TGF-beta1 ELISA. The effects of extracts on TGF-beta1, Collagen-1alpha and Nestin gene expression were analysed using semi-quantitative RT-PCR in the dental MDPC-23, OD-21 and fibroblastic Swiss 3T3 cell lines following 24h of exposure. Ca(OH)(2) solubilised NCPs and GAGs from the dentine ECM, although with a lower yield than the EDTA solution and with different kinetics. 1D-PAGE analysis demonstrated some differences in profiles for proteins solubilised from dentine by Ca(OH)(2) and EDTA. Both solutions released TGF-beta1 from the dentine with higher concentrations present in the EDTA (1.395 +/- 0.036 ng/mg) versus the Ca(OH)(2) (0.364 +/- 0.012 ng/mg) extract. Notably, both extracts induced similar gene expression profiles in all cell lines. These data provide a rational explanation for the action of Ca(OH)(2) during pulp capping in which the cellular activities involved in dentine bridge formation may be mediated through release of growth factors and other bio-active molecules from the dentine by Ca(OH)(2).

Base Sequence↗

PubMed2006

Mandibular phenotype of p20C/EBPbeta transgenic mice: Reduced alveolar bone mass and site-specific dentin dysplasia.

CCAAT enhancer binding proteins (C/EBP) comprise a family of basic-leucine zipper transcription factors that regulate cellular differentiation and function. To determine the role of C/EBP transcription factors in osteoblasts and odontoblasts, we generated a transgenic (TG) mouse model with Co1a1 (pOBCol3.6) promoter-targeted expression of a FLAG-tagged dominant negative C/EBP isoform, p20C/EBPbeta (previously LIP). Two of the four transgenic lines presented with abnormalities in the developing incisors, including breakage, overgrowth, and malocclusion. Histological examination revealed that the amount of alveolar bone was reduced in TG compared to wild-type (WT) mice. By microcomputed tomography (microCT), the bone volume fraction of the mandible was reduced at the level of the first and third molars, demonstrating a severe mandibular osteopenia. The lingual dentin morphology of TG incisors differed dramatically from WT. Labial dentin (enamel side) showed normal thickness and tubular dentin structure, whereas the lingual dentin was thinner (25-30% of WT at the alveolar crest) with an amorphous globular structure characteristic of dentin dysplasia. FLAG immunostaining was seen in both lingual and labial odontoblasts, indicating that the site-specific defect was not due to a lack of labial transgene expression. Northern blot analysis demonstrated reduced osteocalcin expression in TG mandibles, while bone sialoprotein was increased, consistent with prior results in calvariae and long bones. Dental sialophosphoprotein, a marker of the odontoblast lineage whose absence causes dentin dysplasia, was modestly reduced in TG mice by Northern blot and in situ hybridization analysis. By fluorescence microscopy, pOBCol2.3-GFP, a marker of the odontoblast lineage, was expressed in both labial and lingual odontoblasts, although GFP-marked lingual odontoblasts were more flattened than WT cells. Moreover, GFP-positive processes in the lingual dentin tubules were truncated and less organized than those in WT dentin. MicroCT analysis showed reduced tissue density in the lingual dentin. These data suggest that C/EBP transcription factors may be involved in the regulation of odontoblast polarization and dentin matrix production.

Alveolar Bone Loss↗

PubMed2005

Micro-tensile bond strength of three luting resins to human regional dentin.

OBJECTIVES: To evaluate the micro-tensile bonding strength (muTBS) of three luting resins to human regional dentin. METHODS: Dentin disks from non-carious third molars were prepared from different regions (s, superficial dentin; d, deep dentin; c, cervical dentin), and divided into groups based on anatomical locations and luting resins (Super-Bond C&B: SB; Panavia F 2.0: PF; RelyX Unicem: RU): SB-s, SB-d, SB-c; PF-s, PF-d, PF-c; RU-s, RU-d, RU-c. Luting resins were used according to the manufacturers' instructions, to bond 1-mm-diameter PMMA or composite rods to the exposed dentin specimens under a load of 7.5 N, in the self-curing mode. After storage for 1 or 3 days, muTBS was tested at a cross-head speed of 1mm/min. Data were analyzed with ANOVA and Fisher's PLSD test. The bonding interface and fractography analyses were performed with SEM and TEM. RESULTS: ANOVA results showed that muTBS to superficial dentin was significantly higher than to deep or cervical dentin for all three luting resins. SB-s and PF-s, with the highest muTBS, failed primarily cohesively in luting resin. muTBS of SB-d and SB-c were significantly higher than those of PF and RU. RU, with the lowest regional muTBS, failed mostly within demineralized dentin. SEM and TEM showed that adhesive failures in SB and PF occurred at the top of the hybrid layer (HL), but no obvious HL was observed in RU. SIGNIFICANCE: Luting resins with different chemical formulations and applications yield significantly different bond strengths to different regions in human dentin.

Adolescent↗

PubMed2005

An inhomogeneous and anisotropic constitutive model of human dentin.

Dentin constitutes the major part of human tooth. It is composed of a large number of tubules with both variational radii and radially parallel pattern. In addition, peritubular dentin surrounds each tubule lumen and has a higher elastic modulus than the matrix of dentin, i.e. intertubular dentin. Considering the above microstructural characteristics, a micromechanics model is used in this paper to evaluate the overall elastic properties of dentin. Five independent effective elastic parameters in transverse isotropic elasticity matrix can be expressed analytically by the material parameters of peri- and intertubular dentin and the volume fraction of tubules. To determine the effectivity of this theoretical model, a finite element (FE) model simulating a longitudinal tooth slice in moire fringe testing of Wang and Weiner (J. Biomech. 31 (1998) 135) was performed. Furthermore, the FE model was developed incorporate modeling of variation of tubule's diameter and softer characteristic of intertubular dentin near the dentin-enamel junction and around the pulp chamber. It turned out that the isoline figure of longitudinal displacement by FE calculation has very similar patterns to the moire fringe results. However, the FE results of displacement by traditional stress-strain models which regard dentin as a homogeneous and isotropic material show an obviously different strain distributions as compared to published moire fringes results. Thus the inhomogeneous and anisotropic model developed in this paper more accurately reflects the true physical nature of human dentin.

Anisotropy↗

PubMed2004

The role of organic tissue on the punch shear strength of human dentin.

OBJECTIVES: The tendency to fracture of human teeth has been attributed to numerous reasons, including pulpless tooth dehydration, tooth structure degeneration, and excessive spreader loading. To date, however, no consistent data has been gathered to ascertain the effect of organic tissue on the biomechanical properties of human dentin. This study explored the influences of organic tissue removal on the morphological changes and punch shear strength by means of low vacuum wet scanning electron microscope (Wet-SEM) and punch shear apparatus. METHODS: The crown dentin slices with a thickness of 0.45-0.50 mm were prepared from extracted human molars. These specimens were immersed in 5% NaOCl for 1, 3, and 6 h to remove the organic tissue. The dynamic morphological changes of these dentin slices after immersion were observed using Wet-SEM. In addition, the punch shear strength and stiffness of specimens were measured. RESULTS: The removal of organic tissue by 5% sodium hypochlorite treatment caused many cracks on the specimen surfaces. Intertubular and peritubular dentin were also affected, causing an abnormal configuration of dentinal tubule orifices. The 5% sodium hypochlorite treatment for 1, 3, and 6 h significantly reduced the punch shear strength of dentin. As the immersion time increased, the values of punch shear strength also diminished. CONCLUSIONS: The organic tissue loss of human dentin would affect the structure of intertubular and peritubular dentin and cause many cracks on the dentin surface. The punch shear strength of human dentin also reduced after removal of organic tissue.

Chondroitin Sulfates↗

PubMed2005

Hardness and elasticity of bonded carious and sound primary tooth dentin.

OBJECTIVE: Although biomechanical properties of bonded dentin are important for resin restorations, no information for primary teeth has been reported. This study evaluated the hardness and elastic modulus of bonded carious and sound primary tooth dentin using two adhesive systems. METHODS: Twelve sound primary molars and 17 carious primary molars were bonded with Clearfil SE Bond (SE: Kuraray) or Single Bond (SB: 3M) and the resin-dentin interface was measured with a nano-indentator and observed with a SEM. Data was statistically analyzed using ANOVA subsequent application of Fisher's PLSD at p<0.01. RESULTS: Compared to the dentin beneath the interface, the hardness of the interface dentin was not significantly different (carious-SE, sound-SE and sound-SB groups) or was significantly higher (carious-SB group). Young's modulus of the interface dentin was not significantly different (carious-SE, carious-SB and sound-SB groups) or was significantly lower (sound-SE group) than that for the dentin beneath the interface. In the comparison of the measurement on the interface dentin, the hardness showed no significant differences among all the groups. The Young's modulus of the sound-SE group was significantly lower than that of the carious-SE and sounds-SB groups, but no significant difference was observed between the carious-SB and other groups. CONCLUSIONS: Physical properties of bonded primary tooth dentin might differ from that of permanent tooth dentin.

Analysis of Variance↗

PubMed2005

Application of DIAGNOdent as a guide for removing carious dentin with Er:YAG laser.

OBJECTIVES: The purpose of this study was to investigate the DIAGNOdent values applicable as a guide for removal of outer layer of carious dentin with Er:YAG laser. METHODS: Carious dentin of human extracted molars was removed by bur with Caries Detector (Group 1: red stained dentin was left, Group 2: light pink stained dentin was left) and by Er:YAG laser with DIAGNOdent value as a guide (30>Group 3>21, 20>Group 4>11, 10>Group 5). The cavity floor dentin after removing carious dentin was examined using microradiograms, EPMA and SEM. RESULTS: The cavity floor dentin of group 1,3 showed the decreases in the degree of X-ray absorption. In group 2,4 and 5, decrease of Ca, P were not observed. The decrease of Mg was observed on the more superficial part of the cavity floor for group 3 than for group 4. CONCLUSIONS: When carious dentin was removed using Er:YAG laser, the carious dentin outer layer was ideally removed with DIAGNOdent values: 11-20. DIAGNOdent values: 11-20, could indicate the completion of outer layer removal of carious dentin with Er:YAG laser, but there are some problems that must be addressed before the clinical application.

Aluminum↗

PubMed2004

Effect of different peroxide bleaching regimens and subsequent fluoridation on the hardness of human enamel and dentin.

STATEMENT OF PROBLEM: Bleaching of teeth by "in-office" or "home" bleaching techniques are popular methods of whitening teeth. However, bleaching may reduce the surface hardness of enamel and dentin. PURPOSE: The purpose of this study was to evaluate (1) the effect of different concentrations of 2 "in-office bleaching" and 2 "home bleaching" agents applied for different time periods on the hardness of enamel and dentin and (2) the effect of subsequent immersion in a low-concentration fluoride solution on the hardness of bleached enamel and dentin. MATERIAL AND METHODS: The enamel and dentin of 12 extracted intact human molar teeth were sectioned lengthwise, ground, polished, embedded in acrylic resin and divided into 4 groups each (n=12). An area of approximately 5 x 5 mm of enamel and dentin tested for Knoop hardness number (KHN; kg/mm 2 ) at a load of 100 g for 20 seconds (baseline). The specimens were stored in distilled water for 1 hour and the microhardness testing repeated as a control group. The groups were bleached as follows: Group OX and Group OQ were bleached "in office" with Opalescence Xtra (35% hydrogen peroxide) and Opalescence Quick (35% carbamide peroxide), respectively, for 5, 15, or 35 minutes and retested for KHN at the end of each time period. "Home bleaching" products Opalescence F (15% carbamide peroxide) and Opalescence (10% carbamide peroxide) were applied in 14-hour applications at 24-hour intervals to Groups OF and O, respectively, which were then tested for KHN. Specimens were immersed in 0.05% fluoride solution (Meridol) for 5 minutes and retested for KHN. The hardness values were analyzed by 2-way ANOVA and Scheffe post hoc test (alpha=.05). Comparisons of KHN between each time and the baseline measurement for each group were of interest. RESULTS: Significant decreases in KHN of enamel and dentin were found after bleaching for all test groups, dependent on the accumulated bleaching time. Group OX showed a 25% KHN reduction for enamel and 22% for dentin after 35 minutes bleaching (P < .0001). Group OQ showed a 13% KHN reduction (P < .0001) for enamel and 10% for dentin after 35 minutes (P < .005). Group OF showed a KHN reduction of 14% for enamel (P < .05) and 9% for dentin (P < .0001) after 14 hours bleaching, and Group O showed an 18% reduction in enamel (P < .0001) and 13% in dentin (P < .0001) for the same period. Fluoridation completely restored the softened dental tissues. CONCLUSION: The "in-office" bleaching technique reduced the hardness significantly more than the "home" bleaching technique. Low-concentration fluoride mouth rinse (Meridol) restored the softened dental tissues.

Analysis of Variance↗

PubMed1999

Differences in the pattern of lanthanum diffusion into predentine and dentine in mouse incisors and molars.

Lanthanum nitrate was either perfused intravascularly or segments of mouse tooth were immersed in a fixative solution containing the tracer. The tracer deposits were examined in young (8-day-old) and older (8-week-old) mouse incisors and molars, demineralized or undemineralized. Lanthanum passed the distal junctional complex of odontoblasts and appeared in the predentine of incisors as large electron-dense stellate aggregates, 40-70 nm in diameter, and in molars as round, 20-40 nm dots. In dentine, tracer deposits were detected at three locations. Near the predentine dentine junction, the tracer densely stained a band 0.5-2.5 microm in width, also termed metadentine; in the inner circumpulpal dentine, the staining was weaker or lacking in an area extending 5-7 microm from the predentine-dentine junction; in outer circumpulpal dentine, lateral diffusion had occurred in porosities of intertubular dentine. Lanthanum impregnated the walls of dentine tubules and a peritubular-like dentine. In contrast, the mantle dentine was never stained. These differences in the pattern of diffusion prove that lanthanum staining is age-dependent and varies between mouse incisors and molars, independently of tissue processing. Architectural properties and driving flux are involved in the transport and localization of lanthanum in predentine and dentine.

Age Factors↗

PubMed1996

Dentin shear strength: effects of tubule orientation and intratooth location.

OBJECTIVES: Dentin has a highly oriented tubule structure, and the tubule number density and area fraction of intertubular dentin vary with distance from the pulp. This investigation sought to determine the influence of tubule orientation on shear strength of dentin from samples derived at various intratooth locations. METHODS: Third molars were sectioned and prepared to provide samples from two locations (center and cusp) and with one of three specific tubule orientations. In series 1, matched pairs of midcoronal samples were tested using two tubule orientations. A paired t-test was used for statistical analysis. In series 2, three samples from central and cuspal areas were tested using three different tubule orientations. A two-day ANOVA was used for statistical analysis. Each sample had dimensions of approximately 1 x 1 x 5 mm and was tested in a hydrated state by a single plane lap shear method. RESULTS: The paired dentin samples of the midcoronal dentin in the two orientations had shear strengths of 72.4 +/- 15.6 MPa and 78.4 +/- 13.2 MPa, and were not significantly different (p > 0.05; paired t-test). In the second series, samples from the center location with tubules parallel to the shear plane with applied force in directions rotated by 90 degrees did not exhibit a significant difference (p > 0.05), with an average value of 53.5 +/- 9.5 MPa. Samples oriented with tubules along the long axis of the specimen and tested with shear force applied perpendicular to the tubule direction had significantly higher (p < 0.05; two-way ANOVA) shear strength (78.0 +/- 8.5 MPa). The specimens from the cusp area did not exhibit a statistically significant difference (p > 0.05; two-way ANOVA) with respect to the three orientations (83.6 +/- 8.4; +/- 13.8; 91.8 +/- 12.7 MPa). Cuspal areas were stronger than central areas in two of the three orientations tested. SIGNIFICANCE: Results indicated that the shear strength differs in central and cusp areas and is dependent on dentin tubule orientation in the central area. Shear strengths were much larger than values reported in shear bond strength tests. This suggests that dentin shear strength is far in excess of dentin bond strengths using shear tests, and that fractures through dentin in such result from flaws or stress concentration in the dentin.

Analysis of Variance↗

PubMed2001

The initial attachment of cemental fibrils to the root dentin surface in acellular and cellular cementogenesis in rat molars.

To elucidate the initial attachment mechanism of cemental fibrils to the root dentin surface in acellular and cellular cementogenesis, developing rat molars were observed by light microscopy and scanning electron microscopy combined with NaOH maceration. The NaOH maceration was used to observe details of the positional association of cemental and dentinal fibrils during cementogenesis. An initial hematoxylin stained, cementum layer began to form on the root dentin surface with the first dentin mineralization in both acellular and cellular cementogenesis. The initial attachment of cemental fibrils to the dentin surface also began at this point. At the initial attachment the intermingling of cemental and dentinal fibrils occurred only in places. With advanced cementogenesis the initial cementum layer became the fibril-poor cemento-dentinal junction. This suggests that cemental fibrils attach on the initial cementum layer, and not directly on dentinal fibrils, so that the layer results in the fibril-poor cemento-dentinal junction. The present study suggests that an intervening adhesive is necessary for the cemento-dentinal attachment at any stage of cementogenesis in rat molars.

Aging↗

PubMed2003

In vitro study of caries detection through sound dentin using a laser fluorescence device, DIAGNOdent.

The objective of this study was to investigate the feasibility of proximal surface caries detection using a laser fluorescence device, DIAGNOdent, through the sound dentin surrounding the cavity wall after removal of occlusal caries. Extracted sound human molars were ground to prepare horizontal and vertical dentin plates 1.4 mm thick. Extracted carious human molars were reduced in thickness horizontally from the occlusal surfaces until exposure of the dentin caries. The dentin plate was placed on the carious tooth. Before and after gradual thinning of the dentin plate from approximately 1.4 mm to 0.2 mm thick, the dentin caries was measured 10 times through the plate by the laser fluorescence device with a cone-shaped tip or a broad tip. When the dentin plate was reduced to less than 0.3 mm thick (using a combination of a horizontal plate and cone-shaped tip) or 0.2 mm thick (using the other combinations), the values measured with the laser fluorescence device were significantly larger than the values before reducing the thickness of the dentin. Based on these results, the device offers potential use as one of the screening tests for proximal surface caries detection through sound dentin when the sound dentin between tip and caries is thin.

Analysis of Variance↗

PubMed2001

Inactivation of root canal medicaments by dentine, hydroxylapatite and bovine serum albumin.

AIM: This study examined and compared the inhibition of the antibacterial effect of saturated calcium hydroxide solution, chlorhexidine acetate and iodine potassium iodide by dentine, hydroxylapatite and bovine serum albumin. METHODOLOGY: Enterococcus faecalis strain A197A prepared to a suspension of 3 x 10(8) cells per ml in 0.5% peptone water was used. Fifty microL of saturated calcium hydroxide solution, 0.05% chlorhexidine acetate or 0.2/0.4% iodine potassium iodide were incubated at 37 degrees C with 28 mg dentine powder (DP), hydroxylapatite (HA) or bovine serum albumin (BSA) in 50 microL water for 1 h before adding 50 microL of the bacterial suspension. Samples for bacterial culturing were taken from the suspension 1 and 24 h after adding the bacteria. In further experiments, the amount of dentine was stepwise reduced from 28 mg 150 microL-1 to 2.8 mg 150 microL-1. RESULTS: Calcium hydroxide was totally inactivated by the presence of 28 mg of DP, HA or BSA. Chlorhexidine (0.05%) was strongly inhibited by BSA and slowed down by dentine. However, HA had little or no inhibitory effect on chlorhexidine. The antibacterial effect of 0.2/0.4% iodine potassium iodide on E. faecalis was totally inhibited by dentine (28 mg), but was practically unaffected by HA or BSA. A stepwise reduction of dentine from 28 mg 150 microL-1 to 2.8 mg 150 microL-1 was followed by a similar reduction of the inhibition of the antibacterial activity of chlorhexidine. Iodine potassium iodide was not inhibited at all with dentine amounts less than 28 mg. However, the effect of saturated calcium hydroxide solution was totally eliminated by dentine, in all four concentrations. CONCLUSION: Inhibition by dentine of the antibacterial activity of calcium hydroxide, chlorhexidine and iodine potassium iodide occurs by different mechanisms. Different components of dentine may be responsible for the inhibition of these three medicaments. Calcium hydroxide was particularly sensitive to inhibition by both inorganic and organic compounds.

Animals↗

PubMed2002

Extracellular matrix proteins and the dynamics of dentin formation.

Dentinogenesis involves controlled reactions that result in conversion of unmineralized predentin to dentin when apatite crystals are formed. This process is dynamic: Maturation events occur within predentin beginning at the proximal layer and progressing to the predentin-dentin (PD) border. One type of controlled reaction is the proteolytic processing of dentin sialophosphoprotein (DSPP) to dentin sialoprotein (DSP) and dentin phosphoprotein (DPP), by cleavage of at least three highly conserved peptide bonds. We postulate that this processing event represents an activation step, resulting in release of DPP, which is active in its effects on formation and growth of apatite crystals. Dentin matrix protein 1 (DPM1), present as a processed fragment (57-kD protein) in bone, is seen in dentin on sodium dodecyl sulfate polyacrylamide gel electrophoresis as one intact protein of 150-200 kD. Anti-57-kD antibodies elicit immunoreactivity in bone, dentin, and cellular cementum. In bone, the reactivity is associated with osteocytes and their cell processes. Similarly, dentin shows reactivity in odontoblasts, predentin, and the odontoblast processes. In summary, the processing of large sialic acid-rich proteins into smaller fragments may be an important part of the controlled conversion of predentin to dentin and osteoid to bone.

Animals↗

PubMed2004

A morphological in vitro study of the effects of Nd:YAG laser on irradiated cervical dentin.

OBJECTIVE: The purpose of this in vitro study was to verify the efficacy of Nd:YAG pulsed laser at 1064 nm in sealing dentinal tubules in vitro, with its resulting morphological changes using clinical parameters applicable to the treatment of dentin hypersensitivity. BACKGROUND DATA: Although many papers have been written on the subject, no rapid, efficient, and long-lasting treatment for this problem has been developed. MATERIALS AND METHODS: Twenty healthy extracted human teeth were kept in saline solution. Cervical cement was removed with a no. 57FG bur to expose approximately 4 mm(2) of dentin. Two groups were in the buccal aspect (A and B-irradiated) and one group in the lingual aspect (C-control not irradiated) of the same tooth. Samples with a remaining dentinal thickness between 1 and 1.5 mm were selected. Irradiation parameters were 30 mJ, 0.3W(Group A) and 40 mJ, 0.4 W(Group B); 7 Hz was used in both groups in two 43-sec applications each, with a 10-sec interval. In 10 samples, the dentinal surface underwent SEM examination for study. The other 10 remaining irradiated samples were centrally cleaved to study laser penetration depth in dentin (SEM). RESULTS: Obliteration of dentinal tubule openings and solidification of the dentin surface were observed in all irradiated samples. Laser penetration depth in dentin (SEM) varied from 1 to 7 microm, depending on irradiation parameters used in each group. CONCLUSION: We concluded that the use of the Nd:YAG laser was a very effective measure for obliterating dentinal tubule openings.

Dentin↗

PubMed2001

Effects of brushing with a dentifrice for sensitive teeth on tubule occlusion and abrasion of dentin.

By using a dentifrice or toothpaste for sensitive teeth, the brushing-induced effects on dentinal tubule occlusion and abrasion of human sound dentin were investigated with a scanning electron microscope and a scanning laser microscope. The dentifrice contained diatomaceous earth and silica as abrasives and strontium chloride hexahydrate as an active ingredient. Thirty dentin pieces of human premolar teeth with an average of 20% occluded dentinal tubules were attached to resin plates and exposed to the oral cavities of five adult subjects for 2, 4, and 8 weeks. Brushing with and without dentifrice was performed 1 min per day, respectively. Brushing with the dentifrice gradually decreased the mean average of occluded tubules from about 91 to 77% during 2 to 8 weeks, although there were no significant differences among the individual values. However, the mean abrasive loss of the dentin surfaces brushed with dentifrice significantly increased from about 52 to 143 microm in depth. The brushed surfaces of the dentin showed a rough topography with numerous toothbrush scratches but no organic pellicle was found. On the other hand, brushing without dentifrice caused about 99% of the dentinal tubules to occlude in 2 and 4 weeks and 100% in 8 weeks. The brushed dentin surfaces at 8 weeks were entirely covered with organic pellicle containing fine mineral granules derived from saliva, and the abrasive loss was about 1.4 microm in mean depth. Such results indicate that brushing with abrasive dentifrices for sensitive teeth remarkably erodes dentin, and suggest that the brushing should cause the dentinal tubules to open again for a certain period of time.

Adolescent↗