SEARCH · PubMed Health

Results for “Repeatability and Reproducibility”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources

PubMed2000

Development of spray-dried acetaminophen microparticles using experimental designs.

Experimental factorial designs were built to investigate the effects of five parameters on production yields and moisture contents of spray-dried products. These factors concerned both the solution feed (drug concentration, colloidal silica concentration and polymer/drug ratio) and the spray dryer (inlet temperature and feed rate). Three formulations containing cellulose derivatives and acetaminophen were tested. The aim of the study was to optimize the operating conditions to maximize production yields while minimizing moisture contents. First screening experiments consisting of fractional factorial designs revealed the most significant factors to be inlet temperature, feed rate and their interaction for both formulations containing sodium carboxymethylcellulose and feed rate and colloidal silica concentration for the formulation containing microcrystalline cellulose. Then, the optimal operating conditions were estimated by response surface methodology. Central rotational composite designs showed quadratic models were adequate. New assays were carried out using these last conditions to evaluate both the repeatability and reproducibility of the spray-drying technique. Yields above 80% and moisture content of approximately 1% were reached. The characterization of microparticles revealed the poor flowability of the spray-dried products due to significant cohesiveness and very small size (less than 55 microm).

Acetaminophen↗

PubMed1999

Genetic variation at six STR loci (HUMTH01, HUMTPOX, HUMCSF1PO, HUMF13A01, HUMFES/FPS, HUMVWFA31) in Aragon (north Spain).

The STR loci HUMTH01, HUMPTPOX, HUMCSF1PO, HUMF13A01, HUMFES/FPS and HUMVWFA31 are widely used in forensic casework analyses and population data are necessary to estimate the frequency of a DNA profile. This paper presents the results of a survey aimed to investigate the allele frequency distribution of these loci in an important Spanish population (Aragon, North Spain). Statistical analysis to determine whether allele frequencies were in Hardy-Weinberg Equilibrium was carried out and also to obtain some parameters of medico-legal interest. There was no evidence of association between the alleles of the loci. The Aragonese sample does not differ substantially from other Caucasian populations.

Data Collection↗

PubMed2001

Determination of iron and molybdenum in a dietetic preparation by flame AAS after dry ashing.

Methods for the determination of iron and molybdenum in a dietetic pharmaceutical preparation by flame atomic absorption spectrometry (FAAS) after dry ashing at 600 degrees C have been validated. Linearity, precision, accuracy, detection and quantification limits, specificity and robustness have been determined. Linearity of response was verified for concentrations ranging from 0.50 to 4.00 mg l(-1) of iron and 1.00 to 6.00 mg l(-1) of molybdenum. Precision of the methods, performed under conditions of repeatability and reproducibility, gave relative standard deviations of 0.4 and 1.1%, respectively, for the iron determination and of 1.0 and 6.5%, respectively, for the molybdenum determination. Mean recoveries determined after spiking dietetic preparation placebos ranged from 97.1 to 102.6% for iron and 95.2 to 102.9% for molybdenum. The limit of detection for iron was 126 microg g(-1) and for molybdenum 129 microg l(-1). Quantification limits were 420 and 433microg l(-1) for iron and molybdenum, respectively. No interference in the iron and molybdenum determination due to other components present in the dietetic capsules was found. Day-to-day and analyst-to-analyst variability was less than 1.1% for iron and 4.5% for molybdenum. Results show the suitability of the method for measurement of iron and molybdenum in a complex matrix sample such as a dietetic pharmaceutical preparation.

Dietetics↗

PubMed2003

A selective HPLC method for determination of lercanidipine in tablets.

An HPLC reversed phase method using both UV (356 nm) and electrochemical (1000 mV) detection was developed in order to determine lercanidipine in commercial tablets. Repeatability and reproducibility were adequate. For quantification we have used the calibration plot method for lercanidipine concentration ranging between 1 x 10(-5) and 1 x 10(-4) M. Also, the proposed method is sufficiently selective to distinguish the parent drug and the degradation products after hydrolysis, photolysis or chemical oxidation. Furthermore, the typical excipients included in the drug formulation (talc, lactose, cornstarch, microcrystalline cellulose, carboxymethylcellulose and magnesium stearate) do not interfere with the selectivity of the method. Finally, the proposed chromatographic method was successfully applied to the quantitative determination of lercanidipine in commercial tablets.

Calcium Channel Blockers↗

PubMed2003

Determination of prednisolone acetate, sulfacetamide and phenylefrine in local pharmaceutical preparations by micellar electrokinetic chromatography.

A new, rapid and simple method is described and applied to resolve and quantify mixtures of prednisolone acetate, sulfacetamide and phenylefrine. The determination was accomplished by micellar electrokinetic capillary chromatography (MEKC) using a fused silica capillary (57 cm x 75 microm ID). The separation was carried out at 25 degrees C and 30 kV, using a 5 mM phosphate-5 mM borate buffer adjusted to pH 8.2, 40 mM sodium dodecylsulfate (SDS) as background electrolyte. Under these conditions, the run time was 6.5 min and the limits of quantification were about 0.5 mg l(-1) for every component. Repeatability and reproducibility studies achieved were showing no significant differences at 95% confidence level. Then, multivariate calibration regression spectrophotometric methods (PLS-1, PLS-2 and PCR) were applied providing, especially PLS-1, a clear example of the high resolving power of these techniques. The MEKC method has been applied for quantifying these compounds in different commercial pharmaceuticals products and the method gave good results when it is compared with the spectrophotometric method. The pharmaceutical preparations do not require any separation step by the two described procedures.

Calibration↗

PubMed2003

First-order UV-derivative spectrophotometry in the analysis of omeprazole and pantoprazole sodium salt and corresponding impurities.

The first-order UV-derivative spectrophotometry, applying zero-crossing method was developed for the determination of omeprazole (OM), omeprazole sulphone (OMS), pantoprazole sodium salt (PANa), and N-methylpantoprazole (NPA) in methanol-ammonia 4.0% v/v, where the sufficient spectra resolutions of drug and corresponding impurity were obtained, using the amplitudes 1D(304), 1D(307), 1D(291.5) and 1D(296.5), respectively. Method showed good linearity in the ranges (microg ml(-1)): 1.61-17.2 for OM; 2.15-21.50 for OMS; 2.13-21.30 for PANa and 2.0-20.0 for NPA, accuracy and precision (repeatability and reproducibility). The experimentally determined values of LOD (microg ml(-1)) were 1.126; 0.76; 0.691 and 0.716 for OM, OMS, PANa and NPA, respectively. The obtained values of 2.91% w/w for OMS and 3.58% w/w for NPA in the presence of their parent drug, by applying the method of standard additions, point out the usage of the proposed method in stability studies. Zero-crossing method in the first-order derivative spectrophotometry showed the impurity-drug intermolecular interactions, due to the possible intermolecular hydrogen bonds, confirmed by divergences of experimentally obtained amplitudes for impurities OMS and NPA in comparison to expected values according to regression equations of calibration graphs.

2-Pyridinylmethylsulfinylbenzimidazoles↗

PubMed1997

Development and validation of a flow-injection method for the determination of albumin tannate, the active component of a pharmaceutical preparation.

A flow-injection analysis method for the determination of albumin tannate in tablets is reported. After optimization of the variables involved, the method has been characterized and validated in terms of calibration using three procedures: repeatability and reproducibility; ruggedness; and selectivity. Finally, it has been applied to real samples (tablets).

Albumins↗

PubMed1998

Study of the British Pharmacopeia method on methimazole (thiamazole) content in carbimazole tablets.

The analysis of carbimazole tablets in The British Pharmacopoeia, 1993, includes a quantitative thin layer chromatography (TLC) determination of methimazole. Repeated analysis of the same samples did not give similar results. The repeatability and reproducibility of the method was studied. It was proved that the residence time of the methimazole spot on the TLC plate is time dependent.

Antithyroid Agents↗

PubMed1986

Assessment of left ventricular end-systolic pressure-volume relations with an impedance catheter and transient inferior vena cava occlusion: use of this system in the evaluation of the cardiotonic effects of dobutamine, milrinone, Posicor and epinephrine.

The end-systolic pressure-volume relation has been postulated as a load-independent measure of cardiac contractility, but has been difficult to measure because of technical problems associated with the serial measurement of intracardiac volume over a physiologic range of ventricular loading conditions. Utilizing a multielectrode impedance catheter to assess continuous, on-line left ventricular relative volume during transient inferior vena cava occlusion, a method is described for determining the end-systolic pressure-volume relation and for assessing changes in this relation secondary to inotropic modulation. In particular, using this method, the relative inotropic properties were determined of four drugs: dobutamine, milrinone, epinephrine and an experimental cardiotonic agent (Ro 13-6438, Posicor). Left ventricular micromanometer pressure and impedance catheter volume were measured continuously in 10 open chest, anesthetized dogs and 14 pigs. Arterial pressure was altered over a range of 20 to 60 mm Hg by brief inferior vena cava constriction. A linear end-systolic pressure-volume relation was observed in pressure-volume diagrams constructed from on-line pressure and impedance catheter recordings. Administration of dobutamine, milrinone and epinephrine resulted in a leftward shift and an increase in the slope of the end-systolic pressure-volume relation as compared with baseline; Posicor did not alter the slope over a range of doses, despite an increase in the cardiac output secondary to arterial vasodilation. Volume changes as measured by the impedance method closely paralleled simultaneous changes in the ultrasonic crystal-determined segment length, and the impedance end-systolic pressure-volume relation slope was reproducible with repeated load-altering maneuvers.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

PubMed1998

Determining the imaging quality of intraocular lenses.

PURPOSE: To validate the proposed optical requirements of a draft international standard for intraocular lenses (IOLs). SETTING: Eight optical testing laboratories in the United States, Germany, Japan, and The Netherlands. METHODS: The testing laboratories performed modulation transfer function (MTF) tests on various IOLs using a model eye and visual resolution tests in air. Each laboratory performed duplicate measurements on a set of 43 lenses that was circulated among the testing laboratories. RESULTS: The interlaboratory tests showed that the MTF measurements using a model eye had better repeatability and reproducibility than the more common industry practice of resolution testing in air with parallel light and the United States Air Force three-bar target. However, the two methods correlated well. The commonly applied criterion that an IOL resolve in air at least 60% of the Rayleigh cutoff spatial frequency corresponded to a minimum requirement of 0.43 MTF units at 100 mm-1 in a model eye. CONCLUSIONS: Either criterion may be applied in accordance with a proposed international standard for IOLs. The model eye method can be applied over a broader range of dioptric powers and is relevant for materials that interact with aqueous. Both tests appear to have a greater ability to detect unwanted surface aberrations than resolution testing of IOLs in a water cell using parallel light, a method described in the current American National Standards Institute standard.

Diagnostic Techniques, Ophthalmological↗

PubMed2002

Common practice in molecular biology may introduce statistical bias and misleading biological interpretation.

In studies on enzyme activity or gene expression at the protein level, data are usually analyzed by using a standard curve after subtracting blank values. In most cases and for most techniques (spectrophotometric assays, ELISA), this approach satisfies the basic principles of linearity and specificity. In our experience, this might be also the case for Western-blot analysis. By contrast, mRNA data are usually presented as arbitrary units of the ratio of a target RNA over levels of a control RNA species. We here demonstrate by simple experiments and various examples that this data-normalization procedure may result in misleading conclusions. Common molecular biology techniques have never been carefully tested according to the basic principles of validation of quantitative techniques. We thus prefer a regression-based approach for quantifying mRNA levels relatively to a control RNA species by Northern-blot, semi-quantitative RT-PCR or similar techniques. This type of techniques is also characterized by a lower reproducibility for repeated assays when compared to biochemical analyses. Therefore, we also recommend to design experiments, which allow the detection of a similar range of variance by biochemical and molecular biology techniques. Otherwise, spurious conclusions may be provided regarding the control level of gene expression.

Journal Article↗

PubMed2001

Optical peroxide biosensor using the electrically controlled-release technique.

An optical biosensor using an electrically controlled-release system was developed for the measurement of peroxide concentration. The electrically controlled-release system consisted of a current-supplying system and a polymer complex by hydrogen bonding between the carboxylic and oxazoline group. The polymer complex was formed below pH 5.0 and was degraded above pH 5.4. The local pH change near the surface of the polymer complex could be controlled by applying the electric current to release an enzyme reaction reagent, 4-hydroxyphenylacetic acid (HPA), in the polymer complex. The releasing rate of HPA was proportional to the electric current applied to the polymer complex. The model of the controlled-release system was proposed to predict the degradation velocity of the polymer complex, which is equivalent to the releasing rate of HPA. The released HPA and analyte, peroxide, flowed into the reactor with the immobilized enzyme and then reacted with the enzyme. The peroxide concentration was measured based on the fluorescence detection of enzyme reaction product, 6,6'-dihydroxy (1,1'-biphenyl) 3,3'-diacetic acid (DBDA). The proposed biosensor had the linear analytical range of 0.025 approximately 1.0 mM with a response time of 20 min, good repeatability, and reproducibility.

Biosensing Techniques↗

PubMed2000

Transferability of ASTM/NIST alanine-polyethylene recipe at ISS. American Society for Testing and Materials/National Institute for Standards and Technology. Istituto Superiore de Sanita

Alanine-polyethylene solid state dosimeters were prepared at Istituto Superiore di Sanita (ISS) following the recipe proposed by National Institute of Standards and Technology (NIST) with the goal of testing its transferability. Dosimeters were prepared using 95% alanine and 5% polyethylene, by weight. They are rugged and of increased sensitivity, repeatability and reproducibility as respect to the ISS alanine-paraffin pellets. Reproducibility of about 1% was obtained at 10 Gy and at 3 Gy if one single pellet or a stack of five dosimeters were used, respectively.

Journal Article↗

PubMed2003

Real-time fMRI of temporolimbic regions detects amygdala activation during single-trial self-induced sadness.

Temporolimbic circuits play a crucial role in the regulation of human emotion. A highly sensitive single-shot multiecho functional magnetic resonance imaging (fMRI) technique with gradient compensation of local magnetic field inhomogeneities and real-time data analysis were used to measure increases in amygdala activation during single 60-s trials of self-induced sadness. Six healthy male and female subjects performed a validated mood induction paradigm with randomized presentation of sad or neutral faces in 10 trials per scan. Subjects reported the intensity of experienced sadness after each trial. Immediate feedback of amygdala activation was given to the subjects during the ongoing scan to reinforce mood induction. Correspondence between increased intensity of predominantly left sided amygdala activation and self-rating of sadness was found in 78% of 120 sad trials, in contrast to only 14% of neutral trials. Amygdala activation was reproducible during repeated scanning sessions and displayed the strongest correlation with self-rating among all regions. These results suggest that amygdala activation may be closely associated with self-induced sadness. This novel real-time fMRI technology is applicable to a wide range of neuroscience studies, particularly those of the limbic system, and to neuropsychiatric conditions, such as depression, in which pathology of the amygdala has been implicated.

Adult↗

PubMed2002

Determination of free and total (free plus protein-bound) melatonin in plasma and cerebrospinal fluid by high-performance liquid chromatography with fluorescence detection.

A simple, sensitive and accurate method for the estimation of free and total (free plus protein-bound) melatonin (MLT) in human plasma and cerebrospinal fluid (CSF) is described. Via Chem-Elut cartridges, free and total MLT (the latter obtained after a deproteinization step) were quantified in dichloromethane-extracted samples and analyzed in one chromatographic run by high-performance liquid chromatography (HPLC) with fluorimetric detection. The column used was an Extrasil ODS-2 (3 microm, 150 x 4.6 mm I.D.), while the mobile phase consisted of 75 mM sodium acetate-acetonitrile (72:28, v/v) (pH 5.0). Repeatability and reproducibility of the method were 3.24 and 9.4%, respectively. The recovery of melatonin from plasma and CSF was 99.9+/-4.0% for non-deproteinized samples and 93.2+/-4.8% for deproteinized samples. The detection limit of the assay was 0.5 pg/ml. In human plasma, the mean+/-SD concentrations in the darkness period were 23.18+/-7.44 pg/ml for free melatonin and 82.5+/-36.48 pg/ml for total melatonin, while the lowest concentrations detected during daytime were 2.23+/-2.22 and 7.40+/-5.68 pg/ml, respectively. Detection of MLT in CSF was 5.01+/-2.31 and 28.55+/-6.95 pg/ml for the free and total fraction, respectively.

Chromatography, High Pressure Liquid↗

PubMed1986

An inhibitor typing scheme for Streptococcus uberis.

A typing scheme was used to test 15 strains of Streptococcus uberis according to their production of (P-type) and sensitivity to (S-type) bacteriocin-like inhibitory substances. Twelve of the strains were inhibitor producers and nine different P-types were detected. All of the strains were typable according to inhibitor sensitivity, ten different S-types being distinguished. Both the P-type and S-type designations of the strains were reproducible on repeated testing. By combination of P-typing and S-typing, highly discriminatory inhibitor 'fingerprints' of the strains could be obtained. This scheme would appear to have considerable potential for typing isolates of Str. uberis as an aid to investigations into the epidemiology of Str. uberis mastitis in dairy cattle.

Animals↗

PubMed1987

Local treatment of spasmodic torticollis with botulinum toxin.

Fifty-six patients with spasmodic torticollis were treated with local injections of botulinum toxin. The drop out rate was 21%. The remaining 44 patients were followed for a period of 3 to 21 months. Thirty-two patients (76%) had pain relief out of 42 presenting with pain; 37 (66%) improved in the amount of sustained movements of torticollis. The efficacy was reproducible after repeated injections.

Adult↗

PubMed1991

Determination of site-specific carbon isotope ratios at natural abundance by carbon-13 nuclear magnetic resonance spectroscopy.

Site-specific natural isotope fractionation of hydrogen studied by deuterium NMR (SNIF-NMR) spectroscopy is a powerful source of information on hydrogen pathways occurring in biosyntheses in natural conditions. The potential of the carbon counterpart of this method has been investigated and compared. Three typical molecular species, ethanol, acetic acid, and vanillin, have been considered. Taking into account the requirements of quantitative 13C NMR, appropriate experimental procedures have been defined and the repeatability and reproducibility of the isotope ratio determinations have been checked in different conditions. It is shown that the carbon version of the SNIF-NMR method is capable of detecting small differences in the carbon-13 content of the ethyl fragment of ethanols from different botanical or synthetic origins. These results are in agreement with mass spectrometry determinations of the overall carbon isotope ratios. Deviations with respect to a statistical distribution of 13C have been detected in the case of acetic acid and vanillin. However, since the method is very sensitive to several kinds of systematic error, only a relative significance can be attached at present to the internal parameters directly accessible. Isotope dilution experiments have also been carried out in order to check the consistency of the results. In the present state of experimental accuracy, the 13C NMR method is of more limited potential than 2H SNIF-NMR spectroscopy. However it may provide complementary information. Moreover it is particularly efficient for detecting and quantifying adulterations that aim to mimic the overall carbon-13 content of a natural compound by adding a selectivity enriched species to a less expensive substrate from a different origin.

Acetates↗