PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Materials Testing”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36Linked to original sources

A microleakage study of temporary restorative materials used in endodontics.

The purpose of this study was to quantitatively evaluate the sealing properties of various temporary restorative materials used in standard endodontic access preparations by using a newly introduced fluid filtration method. The materials tested were Cavit, Cavit-G, TERM, glass ionomer cement, zinc phosphate cement, polycarboxylate cement, and IRM. Extracted human incisor, canine, and premolar teeth were used, and each tooth served as its own control by testing for microleakage prior to access preparation. Following access preparation, cotton pellets were placed in the pulp chamber so that the space remaining for the restoration was 4 mm. Immediately after placement of the restoration, the teeth were immersed in Ringer's solution and incubated at 37 degrees C. Microleakage was measured after various time intervals. The results indicated that Cavit, Cavit-G, TERM, and glass ionomer cement provided leakproof seals during the 8-wk testing period, while leakage was observed in 4 of the 10 teeth restored with zinc phosphate cement. IRM and polycarboxylate cement were the least effective of the materials tested for preventing microleakage.

Calcium Sulfate↗

Cholesterol reduction by glucomannan and chitosan is mediated by changes in cholesterol absorption and bile acid and fat excretion in rats.

Glucomannan, a viscous polysaccharide, and chitosan, a derivative of chitin, have both been demonstrated to lower cholesterol in animals. However, the mechanism of cholesterol lowering has not been established for either material. This study was conducted to determine the effect of glucomannan (G), chitosan (CH), or an equal mixture of the two (G + CH) on cholesterol absorption and fat and bile acid excretion. Rats were fed a modified AIN-93G diet for 18 d containing 0.125 g/100 g cholesterol and initially 10 g/100 g of the test materials or cellulose (C) as the control. However, the concentration of test materials and cellulose was reduced to 7.5 g/100 g after 1 wk due to lower weight gain compared with controls. Total liver cholesterol was significantly reduced in G, CH and G + CH groups compared with the C group. The intestinal contents supernatant viscosity of the C and the CH groups was negligible, whereas both G and G + CH produced high viscosities. Cholesterol absorption, measured by the fecal isotope ratio method, was significantly reduced from 37.5% in the C group to 20.2% in G, 18.2% in G + CH and 9.4% in CH. Daily fecal fat excretion did not differ between the C and G groups, but was significantly greater in G + CH and CH compared with the C and G groups. Daily fecal bile acid excretion was significantly greater in the CH and G + CH groups compared with the C and G groups. These results suggest that G lowered liver cholesterol by a viscosity-mediated interference of cholesterol absorption. In contrast, CH appears to lower cholesterol through a different mechanism.

Analysis of Variance↗

Effects of implantable biomaterials on radiation dosimetry.

BACKGROUND: It is generally known that radiation dose is enhanced in front of and reduced behind metallic plates. This study evaluates metallic, ceramic, and bioabsorbable facial-reconstruction materials for their differential effects on radiation dosimetry. METHODS: Commercially pure titanium (cpt), stainless steel (steel), titanium alloy (tia), hydroxyapatite (HA), and poly-L-lactide (PLA, a bioabsorbable polymer) were obtained for this study. The radiation doses distal (behind) and proximal (in front of) to the test material were measured with an ionization chamber placed at several distances from the test material. Therefore, transmission (proximal to plate) and backscattering (distal to plate) factors were generated at several distances for each material. RESULTS: Poly-L-lactide transmitted nearly 100% of the incident radiation beam. The metals had the greatest effect on transmission with steel, followed by cpt, tia, and HA showing the greatest reduction of incident beam. Poly-L-lactide revealed minimal backscattering. Greater backscatter of the incident radiation beam was seen from steel, followed by cpt and HA. Poly-L-lactide also behaved similar to water in transmission and backscatters properties during electron irradiation. CONCLUSIONS: Poly-L-lactide has a minimal effect on the radiation-dose distribution and may be beneficial as a reconstructive device for patients undergoing head and neck cancer radiotherapy. Hydroxyapatite showed a relatively minor effect, whereas the metals (steel, followed by cpt and tia) revealed the greatest detrimental effect on the radiation-dose distribution.

Alloys↗

The effect of heparin vs. citrate on the interaction of platelets with vascular graft materials.

Heparin is known to affect platelet function in vitro, but little is known about the effect of heparin on the interaction of platelets with polymer surfaces in general, and vascular graft materials in particular. For this reason, the effect of heparin vs. citrate anticoagulation on the interaction of platelets with the vascular graft materials expanded polytetrafluoroethylene (ePTFE), Dacron Bionit (DB) and preclotted Dacron Bionit (DB/PC) was studied in a recirculating, in vitro perfusion system. Platelet activation, as shown by a decrease in platelet count, an increase in platelet release and a decrease in platelet aggregation, was observed for all vascular graft materials tested using heparin and was greater for Dacron and preclotted Dacron than for ePTFE. Significant differences between heparin and citrate anticoagulation were seen for platelet release, platelet aggregation and the relative ranking of material platelet-reactivity. However, the trends and time course of platelet activation were similar with both heparin and citrate for the materials tested.

Adult↗

Evaluating the potential for recycling all PET bottles into new food packaging.

To evaluate the feasibility of recycling all PET bottles into food packaging, realistic estimates of the maximum concentration of contaminants that might be expected in the polymer are needed. To estimate the maximum concentration of a contaminant that might be in PET from the storage of non-food substances, sorption experiments into two types of PET were performed. These test materials were 0.8mm thick amorphous PET (a relative sink for contaminants) and commercial PET bottle wall. Using a commercial shampoo containing 1% lindane (C6H6Cl6), the test materials were stored in contact with the shampoo at 20 and 40 degrees C for 231 days. This commercial shampoo also represents an extreme case because it contains 7% acetone, a solvent which swells PET, further enhancing sorption of chemicals. Additional sorption experiments into PET were performed by preparing solutions of 10% toluene in Miglyol (a fractionated coconut oil), 10% benzophenone in Miglyol, 5% 2-butoxyethoxy ethanol (2-BE) in 50/50 water/ethanol, and 10% methyl stearate in heptane. Sorption data from the shampoo into PET illustrate Fickian behaviour. Specifically, the amount of sorption at room temperature is approximately40 times less than that at 40 degrees C. The amount of lindane sorbed into PET from the shampoo after 231 days was 0.1 and 3.7 mgdm(-2) at 20 and 40 degrees C respectively. These values correspond to 28 and 765 mg kg(-1) on a mass/mass basis. All sorptions are within the ranges measured and published by other authors using surrogate contamination testing schemes. Additionally, actual bottles from recycle bins were analysed for the amout of contamination. Results are discussed in terms of potential consumer exposure to non-food contaminants in food containers made of recycled PET and in relation to the surrogate testing methods recommended by the Food and Drug Administration (FDA) for determining the compatibility of a PET recycling process to produce containers suitable for food-contact use.

Absorption↗

Improved methodology for generating controlled test atmospheres.

Improved methodology has been developed for generating controlled test atmospheres. Vaporization of volatile liquids is accomplished in a 28 mm (O.D.) glass J-tube in conjunction with a compressed air flameless heat torch, a pressure-sensitive switch, and a positive displacement piston pump. The vaporization system has been very reliable with a variety of test materials in studies ranging from a few days to several months. The J-tube vaporization assembly minimizes the possibility of thermal decomposition of the test material and affords a better margin of safety when vaporizing potentially explosive materials.

Environment, Controlled↗

An evaluation of the acute toxic properties of liquids derived from oil sands.

The acute toxicity of three materials derived from Athabasca Oil Sands--(1) bitumen plus naphtha, (2) untreated naphtha (0-250 degrees C) and (3) synthetic crude oil (0-500 degrees C)--was assessed in a battery of tests. In acute oral studies, all three test materials exhibited a low order of toxicity (LD50 greater than 5.0 g kg-1). The acute dermal LD50 was also low (greater than 3 g kg-1) for each test material. All three materials were judged to be 'slight' ocular irritants. Acute inhalation studies (6-h exposures at the maximum attainable concentrations) produced varied responses. Bitumen plus naphtha administered at a concentration of 1.46 mg l-1 did not cause mortality in exposed rats or mice. Lung discoloration was the only necropsy finding of note. Untreated naphtha administered at a concentration of 10.6 mg l-1 was lethal to essentially all of the mice; but only two rats died. Necropsy findings included elevated weights in the liver and kidneys of the exposed mice, elevated lung weights in male rats and elevated liver weights in female rats. Synthetic crude oil administered at a concentration of (4 mg l-1) was lethal to 5/10 mice, but none of the rats (0/10) died. Severe hair loss was noted in the surviving mice, and slight alopecia was also observed in rats. Both species exhibited elevated liver weight, and elevated lung weight was noted in female rats.

Administration, Cutaneous↗

Polydimethyl siloxane materials in maxillofacial prosthetics: evaluation and comparison of physical properties.

The need for more acceptable materials for use in maxillofacial prosthetics has long been recognized. In this study, the physical properties of several currently available polydimethyl siloxane materials were evaluated and compared with those of two previously tested materials. The properties chosen were tensile strength, elongation, tear strength, and hardness. These properties were chosen as indicators of the strength, flexibility, durability, and lifelike feel of the materials in clinical service. Testing procedures were intended to duplicate as nearly as possible those used by Chalian and Jones and to conform closely to ASTM specifications. In general, the physical properties of the five silicone materials tested in this study were superior to those of MDX-4-4210 and MDX-4-4514, tested previously. This superiority was particularly evident in terms of strength and elongation. Although the materials failed to demonstrate the softness of other materials, they may prove acceptable with the addition of available modifiers. Although no material was consistently superior to the others, potential merit is seen especially in Q7-4635 and SE-4524U. These materials exhibited high strength and softness and are available in one component system. Unlike the two-component addition chemistry systems, these materials have an indefinite pot life and are much more easily manipulated.(ABSTRACT TRUNCATED AT 250 WORDS)

Chemical Phenomena↗

Skin irritation testing in rabbits complicated by dermal mucormycosis.

Two insecticide formulations were evaluated for skin irritation using albino rabbits (Stauffland-White strain). While the active ingredient alone produced only mild skin irritation, corn grit formulation produced severe skin irritation. Corn grit from three sources (A, B, and C) was similarly evaluated for skin irritation and at 24 hr, all samples produced erythema and edema of both the abraded and nonabraded test sites. Eschar was observed in 72 hr in about half of the rabbits and persisted through termination on the 7th day. Histologic examination of skin specimens revealed that all three corn grit samples produced epidermatitis. In addition, rabbits exposed to corn grit from two sources (A and B), developed moderate focal to severe diffuse suppurative necrotizing folliculitis and dermatitis. Large tubular branching nonseptate hyphae compatible with the Mucorales species were seen in hair follicle micropustules of rabbits treated with corn grit from sources A and B. Mycologic culture techniques applied to corn grit from each source revealed a potential pathogen in the genus Rhizopus isolated from samples from sources A and C but not B. The skin irritation test involved application of test material covered with gauze to both abraded and nonabraded skin. Rubber damming was placed over the gauze and secured with tape. After 24-hr exposure all bandaging and visible test material were removed. Skin irritation was evaluated immediately after removal and then periodically until termination at 7 days.

Animals↗

Tumor initiation and promotion effects of petroleum streams in mouse skin.

A furnace oil, a dewaxed heavy paraffinic distillate, and a solvent-extracted lubricant base oil induced skin tumors in 9/43, 26/48, and 1/47 male C3H mice, respectively, during lifetime skin-painting bioassays. An initiation/promotion (I/P) bioassay was conducted to assess the I/P potential of these materials. During a 28-week initiation bioassay, groups of 30 male CD-1 mice were first treated dermally once daily for 5 days with 25 or 50 microliter of test materials or 50 microliter of acetone, rested for 2 weeks, then treated twice per week for 25 weeks with 50 microliter (0.1 mg/ml) phorbol-12-myristate-13-acetate (PMA). Only groups treated with the heavy paraffinic distillate had a significantly higher incidence of papillomas relative to the acetone control group. During a 28-week promotion bioassay, groups of 30 male CD-1 mice were treated once with 50 microliter of either DMBA (1.0 mg/ml) or acetone, rested for 2 weeks, and then treated twice per week with test material for the remaining 25 weeks. The furnace oil and dewaxed heavy paraffinic distillate showed significantly higher incidences of carcinomas and papillomas in DMBA-initiated mice relative to their acetone-initiated controls. Together these bioassay data suggest that only the dewaxed heavy paraffinic distillate is a complete carcinogen, having both initiating and promoting activity; furnace oil is a promoter only, while the solvent-extracted lubricating oil is noncarcinogenic. Overall, the I/P bioassay correlated well with the results of the lifetime skin-painting bioassay.

Animals↗

Tensile strength of elastomeric impression materials, adhesive and cohesive bonding.

Numerous factors are known to effect the accuracy of elastomeric impression materials. Factors often overlooked are the quality of the bond between low-viscosity and high-viscosity elastomers and the presumed cohesive bond between materials during an impression reline procedure. This study examined the bond strength of condensation polymerization polysiloxanes, addition polymerization polysiloxanes, polyethers, and a light-cured polyether urethane dimethacrylate. Of the tested materials, light-cured polyether urethane dimethacrylate exhibited the greatest bond strength. The reline technique, light-body cured to previously cured heavy-body putty, yielded results similar to the simultaneous-cure technique. In terms of bond strength there is no advantage of one technique over the other. The corrective reline technique yielded acceptable results in bond strength. In general, the tested materials exhibited greater tensile strength than bond strength.

Dental Bonding↗

Cognitive screening using a tape recorder: a pilot study.

OBJECTIVES: To determine whether a tape recorder can be used to administer cognitive tests efficiently and yield valid results. DESIGN: Convenience sample. Administration of cognitive test materials by tape recorder and conventional technique. SETTING: Outpatient clinic. PARTICIPANTS: Subjects from memory disorder clinic, hostel accommodation, and community. MEASUREMENTS: Responses to Hopkins Verbal Learning Test-revised, verbal fluency items from the controlled oral word association test, 10-item naming task, a construction task, and speed writing task. RESULTS: Performances on the tape- and clinician-administered battery of tests were highly correlated. Memory impairment was accurately detected using the tape battery. Data from 30 minutes of testing via tape were obtained at the cost to the clinician of 2 to 3 minutes of scoring time. CONCLUSION: Tape-administration of cognitive test material warrants further study as an efficient means of cognitive screening.

Adult↗

Developmental toxicity of Clarified Slurry Oil applied dermally to rats.

Clarified Slurry Oil (CSO), the heavy residual fraction from the fluidized catalytic cracker, was applied to the shaven backs of groups of 10 pregnant rats at doses of 0, 4, 8, 30, 125, and 250 mg/kg/day. All groups received the test material on gestation days 0-19. CSO was applied undiluted and left uncovered on the skin; collars were placed on the rats to minimize ingestion of the test material. Signs of maternal toxicity, some of which were seen at dose levels as low as 8 mg/kg/day, included vaginal bleeding, decreased body weight gain, reduced food consumption, death, increased relative liver weights, atrophy of the thymus, and aberrant serum chemistry. The number of fetal resorptions/deaths was markedly increased and the number of viable offspring decreased by CSO at dosages of 30 mg/kg/day and above. The group receiving 250 mg/kg/day carried no viable offspring. Fetuses from pregnant females exposed to CSO at dose levels in excess of 8 mg/kg/day were smaller than those from control and 4 mg/kg/day groups, and their skeletons showed decreased ossification. Abnormal external development and visceral development were observed in living and dead fetuses exposed in utero to CSO at dose levels as low as 8 mg/kg/day. Based on these data, 4 mg/kg/day represents the No-Observed-Adverse-Effect-Level for both maternal and developmental toxicity.

Abnormalities, Drug-Induced↗

Acclimatization to hearing aids.

OBJECTIVE: To investigate acclimatization to hearing aids. DESIGN: Forty-eight subjects took part in a study in which hearing aid benefit was measured four times over the initial 3 mos of participation. At the start, 24 subjects were experienced hearing aid users and 24 had never worn a hearing aid before. Subjects wore one of three models of hearing aid with one of six different configurations (combination of frequency response and method of output limiting). Hearing aid benefit was measured with CID W-1 spondees and the Hearing in Noise Test (HINT) test. Testing took place on Days 0 (day of fitting), 30, 60, and 90. Analyses of variance were used to determine whether hearing aid benefit changed over time as a function of hearing aid user status, hearing aid configuration, and hearing aid volume setting. RESULTS: There were small, nonsignificant changes in hearing aid benefit over the test sessions with both sets of test materials. There were no interactions between hearing aid benefit over time and hearing aid user status or hearing aid volume setting. There was an interaction between benefit over time and hearing aid configuration on one test measure only. CONCLUSIONS: The data showed little evidence of acclimatization over the 3 mo of hearing aid use. The test materials used here were low- to mid-frequency sensitive, and, therefore, it is concluded that if acclimatization did occur, it did so primarily at high frequencies. Because the HINT test has good face validity to everyday listening situations, it is suggested that the clinical ramifications of acclimatization are probably small.

Aged↗

Impedance to transthoracic direct current discharge: a model for testing interface material.

An in vitro method for screening the relative impedance of gels has been developed. A nonconductive chamber was built with 1-cm-diameter electrodes placed 1 cm apart. This chamber is filled with electrode gel to be tested. The defibrillator used delivers a half-sinusoidal waveform. When the same stored energy is discharged by this defibrillator into increasing impedance, the resultant delivered current wave decreases while the voltage wave increases. Thus, with increasing impedance, the delivered volt-time interval increases. Twelve electrode gels were studied; 10 measurements were made on each gel. There is a marked variation in the impedance to direct current discharge of commercially available electrode gels. A large number of commercially available electrode gels are not suitable for use as the interface between the paddle electrodes and the chest wall during elective cardioversion and emergency defibrillation.

Electric Conductivity↗

Polymerization contraction stress in light-cured compomer restorative materials.

OBJECTIVE: The magnitude and kinetics of polymerization contraction stress build-up may be potential predictors of bond failure of adhesive restorations. The present study determined these properties of seven commercial compomers (Dyract, Dyract AP, F2000 Rasant, Hytac, Compoglass F, Luxat, Glasiosite). METHODS: Polymerization shrinkage was generated by 40 s light curing the test materials (800 mW/cm2). The contraction force induced was recorded for 300 s at room temperature (23-24 degrees C) by means of a Stress-Strain-Analyzer (C factor=0.33). Maximum contraction stress (MPa), coefficient of near linear fit of contraction force/time (gradient) and relative force rate (%/s) of each material were compared with that of two hybrid composites (Tetric Ceram, Prodigy). The statistical analysis was conducted by ANOVA (alpha=0.05) and post hoc Tukey's test. RESULTS: No statistically significant differences in the maximum stress between Glasiosite (2.27+/-0.06 MPa), Hytac (2.31+/-0.07 MPa) and Tetric Ceram (2.21+/-0.11 MPa), and between Compoglass F (2.60+/-0.18 MPa) and Prodigy (2.70+/-0.06 MPa) were found. The contraction stress of F2000 Rasant (3.41+/-0.09 MPa) and Luxat (3.33+/-0.08 MPa) were significantly highest, whilst Dyract exhibited the significantly lowest shrinkage stress (1.27+/-0.08 MPa) among the tested materials. SIGNIFICANCE: High contraction stress, early start of stress build-up and rapid contraction force development may lead to failure of bond to tooth structure. This study suggested that the contraction stress and kinetic behavior of compomers are generally similar to those of hybrid composites in a dry condition. Dyract might be superior in maintaining the bond with cavity walls compared to conventional hybrid composites in view of its low shrinkage stress.

Analysis of Variance↗

The KID study IV: effects of inpatient rehabilitation on the frequency of glucose self-monitoring, quality of further primary care, on time being unable to work and on everyday psychic strain of type I and type II diabetics--a one-year follow-up. Kissingen Diabetes Intervention Study.

The Kissingen Diabetes Intervention Study (KID) evaluated 1,050 diabetic patients of the German Federal Insurance Institution for Salaried Employees (BfA) admitted for inpatient rehabilitation in a single-center, prospective, longitudinal study which was carried out to collect data concerning the structure of the patient cohort, socioeconomic factors, psychological data and state of medical care by consecutively registered random tests. These results have already been published. We will now report on the outcome 6 and 12 months after inpatient treatment. Consisting of rather young diabetics in higher professional standing, our patient cohort is especially interesting for health policy. The numbers of type I diabetics and of insulin-treated type II diabetics who self-monitor blood glucose levels several times daily significantly increased after inpatient rehabilitation. This situation is maintained 6 and 12 months after discharge. The number of type II diabetics on diet or oral hypoglycemics who do not monitor urinary glucose levels at all, is significantly reduced. The frequency of daily or weekly checks is significantly raised even after 12 months. Due to inpatient diabetic education, self-monitoring of glucose levels plays a more important role in primary care of these patients. 68.5% of all type I and about 60% of all type II diabetics receive test material without problems and are encouraged to continue monitoring. However, about 30% of type I and type II diabetics under primary-care management are still supplied with test material only when especially demanding it. The frequency of consultations in primary care diabetic management remains unchanged after inpatient treatment. The quality of diabetic management in primary care is improved by patient education. Monitoring of HbA1 is significantly increased in type I diabetics and significantly increased in type II diabetics. A similar development is seen in monitoring urinary albumin excretion but here are still deficits. For type II diabetics, the body weight and serum lipids are increasingly controlled main parameters. But in many places and especially in the case of type II diabetics the fasting glucose level is still used as main parameter. Compared with the 6 months prior to inpatient treatment, times when type I and type II diabetics are unable to work are significantly reduced in the 6 months and 12 months after-wards. Evaluating individual profiles of psychosocial strain shows that the more intense confrontation with problems of the disease and demands of the treatment can lead to a poorer quality of life in several categories. This was seen in the categories anxiety, depression, fear of hypoglycemias in the case of type I diabetics, restriction of leisure time activities, relationship with the partner and acceptance of disease. Only in the categories patient-physician relationship and professional strain was an improvement found. These alterations are still demonstrable after 6 and 12 months.

Absenteeism↗

Development of a sensitive test method to evaluate mechanical irritation potential on mucosal skin.

BACKGROUND/PURPOSE: The studies presented here are intended to continue the validation of the behind-the-knee test system developed to evaluate the mechanical irritation potential of products such as catemenial pads, baby and adult diapers (which are inherently non-irritating products/chemicals). These products are intended to be worn for prolonged periods of time on body sites that include the mucous membrane and non-keratinized epithelium in addition to normal squamous cell epithelium. These studies had two specific goals. The first was to validate the test model using a variety of conditions, including those that mimic the conditions that exist during normal product use. The second specific goal was to determine the most cost-effective protocol to use for screening different product executions for potential irritant effects. If the model proves to be reliable under a variety of conditions, it will be an ideal test system to use in claims support studies, where it is preferable to mimic use conditions as closely as possible. We were also interested in evaluating sensory responses that consumers often associate with irritation to determine if any of these sensations correlated with objective measures of irritation. METHODS: Three test materials were used in these experiments. All three are commercially available catemenial pads that were expected to be similar, but not identical, in irritant properties based on subjective consumer reports of irritation associated with product use. Test materials were applied daily to the area behind the knee and held in place for 6 h by an elastic knee band of appropriate size. Irritation was graded 30-60 min after test product removal, and the following morning before application of the next sample. Two products were compared using four different protocol variations: dry product on intact skin, dry product on tape stripped (compromised) skin, wet product (i.e., product loaded with 8 mL of saline) on intact skin and wet product on compromised skin. An additional study compared the two products using two protocol variations (intact skin/dry product vs. compromised skin/wet product). In addition, a study (#5) was conducted to compare a third product applied wet on intact vs. compromised skin. In the final two studies, information was collected from the panelists on subjective sensations of irritation. RESULTS: All four protocol variations were capable of detecting significant differences between the products. These differences were directionally similar to what was expected based on subjective consumer comments. In addition, a higher number of certain perceived sensory effects were reported for the more irritating product. CONCLUSIONS: In these studies, Product A is more irritating than Product B when assessed objectively, i.e., by scoring irritation at the test sites, and subjectively, i.e., by evaluating reports of adverse sensations perceived by panelists. There is no clear relationship between specific test conditions, i.e., compromised skin and/or testing wet samples, and reports of perceived sensory reactions. However, some sensory reactions appear to be associated with higher levels of irritation. The most cost-effective protocol to use for screening for potential irritant effects for catemenial pads, baby and adult diapers is two 6-h sample applications on intact skin, with scoring in the afternoon 30 min after removal of the sample. For claims support testing, a variety of test conditions can be used in the behind-the-knee assay to mimic the exposure conditions for the product under evaluation, including using compromised (tape stripped) skin and wet product samples.

Absorbent Pads↗