SEARCH · PubMed Health

Results for “Solvent accessibility”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36Linked to original sources

PubMed1998

Structure of human apolactoferrin at 2.0 A resolution. Refinement and analysis of ligand-induced conformational change.

The three-dimensional structure of a form of human apolactoferrin, in which one lobe (the N-lobe) has an open conformation and the other lobe (the C-lobe) is closed, has been refined at 2.0 A resolution. The refinement, by restrained least-squares methods, used synchrotron radiation X-ray diffraction data combined with a lower resolution diffractometer data set. The final refined model (5346 protein atoms from residues 1-691, two Cl- ions and 363 water molecules) gives a crystallographic R factor of 0.201 (Rfree = 0. 286) for all 51305 reflections in the resolution range 10.0-2.0 A. The conformational change in the N-lobe, which opens up the binding cleft, involves a 54 degrees rotation of the N2 domain relative to the N1 domain. This also results in a small reorientation of the two lobes relative to one another with a further approximately 730 A2 of surface area being buried as the N2 domain contacts the C-lobe and the inter-lobe helix. These new contacts also involve the C-terminal helix and provide a mechanism through which the conformational and iron-binding status of the N-lobe can be signalled to the C-lobe. Surface-area calculations indicate a fine balance between open and closed forms of lactoferrin, which both have essentially the same solvent-accessible surface. Chloride ions are bound in the anion-binding sites of both lobes, emphasizing the functional significance of these sites. The closed configuration of the C-lobe, attributed in part to weak stabilization by crystal packing interactions, has important implications for lactoferrin dynamics. It shows that a stable closed structure, essentially identical to that of the iron-bound form, can be formed in the absence of iron binding.

Apoproteins↗

PubMed1993

Using nitroxide spin labels. How to obtain T1e from continuous wave electron paramagnetic resonance spectra at all rotational rates.

Historically, the continuous wave electron paramagnetic resonance (CW-EPR) progressive saturation method has been used to obtain information on the spin-lattice relaxation time (T1e) and those processes, such as motion and spin exchange, that occur on a competitive timescale. For example, qualitative information on local dynamics and solvent accessibility of proteins and nucleic acids has been obtained by this method. However, making quantitative estimates of T1e from CW-EPR spectra have been frustrated by a lack of understanding of the role of T1e (and T2e) in the slow-motion regime. Theoretical simulation of the CW-EPR lineshapes in the slow-motion region under increasing power levels has been used in this work to test whether the saturation technique can produce quantitative estimates of the spin-lattice relaxation rates. A method is presented by which the correct T1e may be extracted from an analysis of the power-saturation rollover curve, regardless of the amount of inhomogeneous broadening or the rates of molecular reorientation. The range of motional correlation times from 10 to 200 ns should be optimal for extracting quantitative estimates of T1e values in spin-labeled biomolecules. The progressive-saturation rollover curve method should find wide application in those areas of biophysics where information on molecular interactions and solvent exposure as well as molecular reorientation rates are desired.

Biophysical Phenomena↗

PubMed1995

A combinatorial library of an alpha-helical bacterial receptor domain.

The construction and characterization of a combinatorial library of a solvent-exposed surface of an alpha-helical domain derived from a bacterial receptor is described. Using a novel solid-phase approach, the library was assembled in a directed and successive manner utilizing single-stranded oligonucleotides containing multiple random substitutions for the variegated segments of the gene fragment. The simultaneous substitution of 13 residues to all 20 possible amino acids was carried out in a region spanning 81 nucleotides. The randomization was made in codons for amino acids that were modelled to be solvent accessible at a surface made up from two of the three alpha-helices of a monovalent Fc-binding domain of staphylococcal protein A. After cloning of the PCR-amplified library into a phagemid vector adapted for phage display of the mutants, DNA sequencing analysis suggested a random distribution of codons in the mutagenized positions. Four members of the library with multiple substitutions were produced in Escherichia coli as fusions to an albumin-binding affinity tag derived from streptococcal protein G. The fusion proteins were purified by human serum albumin affinity chromatography and subsequently characterized by SDS-electrophoresis, CD spectroscopy and biosensor analysis. The analyses showed that the mutant protein A derivatives could all be secreted as soluble full-length proteins. Furthermore, the CD analysis showed that all mutants, except one with a proline introduced into helix 2, have secondary structures in close agreement with the wild-type domain. These results proved that members of this alpha-helical receptor library with multiple substitutions in the solvent-exposed surface remain stable and soluble in E. coli.(ABSTRACT TRUNCATED AT 250 WORDS)

Adhesins, Bacterial↗

PubMed1998

Molecular dynamics and continuum solvent studies of the stability of polyG-polyC and polyA-polyT DNA duplexes in solution.

Molecular dynamics simulation in explicit solvent and continuum solvent models are applied to investigate the relative stability of A- and B-form helices for two DNA sequences, dA10-dT10 and dG10-dC10 in three structural forms. One structural form is based on an unrestrained molecular dynamics (MD) trajectory starting from a canonical B-DNA structure, the second is based on a MD trajectory starting in a canonical B-DNA structure with the sugars constrained to be C2'-endo and the third simulation started from a canonical A-DNA structure with the sugars constrained to C3'-endo puckers. For the energetic analysis, structures were taken as snapshots from nanosecond length molecular dynamics simulations computed in a consistent fashion in explicit solvent, applying the particle mesh Ewald method and the Cornell et al. force field. The electrostatic contributions to solvation free energies are computed using both a finite-difference Poisson-Boltzmann model and a pairwise Generalized Born model. The non-electrostatic contributions to the solvation free energies are estimated with a solvent accessible surface area dependent term. To estimate the gas phase component of the relative free energy between the various structures, the mean solute internal energies (determined with the Cornell et al. molecular mechanics potential including all pairwise interactions within the solute) and estimates of the solute entropy (using a harmonic approximation) were used. Consistent with experiment, the polyG-polyC (GC) structures are found to be much more A-phillic than the polyA-polyT (AT) structures, the latter being quite A-phobic. The dominant energy components responsible for this difference comes from the internal and van der Waal energies. A perhaps less appreciated difference between the GC and AT rich sequences is suggested by the calculated salt dependence which demonstrates a significantly enhanced ability to drive GC rich sequences towards an A-form structure compared to AT rich sequences. In addition to being A-phobic, the AT structure also has a noticably larger helical repeat than GC and other mixed sequence duplexes, consistent with experiment. Analysis of the average solvent density from the trajectories shows hydration patterns in qualitative agreement with experiment and previous theoretical treatments.

Computer Simulation↗

PubMed1990

Prediction of homologous protein structures based on conformational searches and energetics.

A "knowledge-based" method of predicting the unknown structure of a protein from a homologous known structure using energetics to determine a sidechain conformation is proposed. The method consists of exchanging the residues in the known structure for the sequence of the unknown protein. Then a conformational search with molecular mechanics energy minimization is done on the exchanged residues. The lowest energy conformer is the one picked to be the predicted structure. In the structure of bovine trypsin, the importance of including a solvation energy term in the search is demonstrated for solvent accessible residues, while molecular mechanics alone is enough to correctly predict the conformation of internal residues. The correctness of the model is assessed by a volume error overlap of the predicted structure compared to the crystal structure. Finally, the structure of rat trypsin is predicted from the crystal structure of bovine trypsin. The sequences of these two proteins are 74% identical and all of the significant changes between them are on external residues. Thus, the inclusion of solvation energy in the conformational search is necessary to accurately predict the structure of the exchanged residues.

Animals↗

PubMed2004

Ligand-induced changes in the conformational dynamics of a bacterial cytotoxic endonuclease.

Knowledge about the conformational dynamics of a protein is key to understanding its biochemical and biophysical properties. In the present work we investigated the dynamic properties of the enzymatic domain of DNase colicins via time-resolved fluorescence and anisotropy decay analysis in combination with steady-state acrylamide quenching experiments. The dynamic properties of the apoenzyme were compared to those of the E9 DNase ligated to the transition metal ion Zn(2+) and the natural inhibitor Im9. We further investigated the contributions of each of the two tryptophans within the E9 DNase (Trp22 and Trp58) using two single-tryptophan mutants (E9 W22F and E9 W58F). Wild-type E9 DNase, E9 W22F, and E9 W58F, as well as Im9, showed multiple lifetime decays. The time-resolved and steady-state fluorescence results indicated that complexation of E9 DNase with Zn(2+) induces compaction of the E9 DNase structure, accompanied by immobilization of Trp22 along with a reduced solvent accessibility for both tryptophans. Im9 binding resulted in immobilization of Trp22 along with a decrease in the longest lifetime component. In contrast, Trp58 experienced less restriction on complexation of E9 DNase with Im9 and showed an increase in the longest lifetime component. Furthermore, the results point out that the Im9-induced changes in the conformational dynamics of E9 DNase are predominant and occur independently of the Zn(2+)-induced conformational effects.

Bacterial Proteins↗

PubMed2006

Regions of IkappaBalpha that are critical for its inhibition of NF-kappaB.DNA interaction fold upon binding to NF-kappaB.

Nuclear factor kappaB (NF-kappaB) transcription factors regulate genes responsible for critical cellular processes. IkappaBalpha, -beta, and -epsilon bind to NF-kappaBs and inhibit their transcriptional activity. The NF-kappaB-binding domains of IkappaBs contain six ankyrin repeats (ARs), which adopt a beta-hairpin/alpha-helix/loop/alpha-helix/loop architecture. IkappaBalpha appears compactly folded in the IkappaBalpha.NF-kappaB crystal structure, but biophysical studies suggested that IkappaBalpha might be flexible even when bound to NF-kappaB. Amide H/(2)H exchange in free IkappaBalpha suggests that ARs 2-4 are compact, but ARs 1, 5, and 6 are conformationally flexible. Amide H/(2)H exchange is one of few techniques able to experimentally identify regions that fold upon binding. Comparison of amide H/(2)H exchange in free and NF-kappaB-bound IkappaBalpha reveals that the beta-hairpins in ARs 5 and 6 fold upon binding to NF-kappaB, but AR 1 remains highly solvent accessible. These regions are implicated in various aspects of NF-kappaB regulation, such as controlling degradation of IkappaBalpha, enabling high-affinity interaction with different NF-kappaB dimers, and preventing NF-kappaB from binding to its target DNA. Thus, IkappaBalpha conformational flexibility and regions of IkappaBalpha folding upon binding to NF-kappaB are important attributes for its regulation of NF-kappaB transcriptional activity.

Amides↗

PubMed2001

Steady-state and time-resolved fluorescence studies on wild type and mutant chromatium vinosum high potential iron proteins: holo- and apo-forms.

Detailed circular dichroism (CD), steady-state and time-resolved tryptophan fluorescence studies on the holo- and apo- forms of high potential iron protein (HiPIP) from Chromatium vinosum and its mutant protein have been carried out to investigate conformational properties of the protein. CD studies showed that the protein does not have any significant secondary structure elements in the holo- or apo- HiPIP, indicating that the metal cluster does not have any effect on formation of secondary structure in the protein. Steady-state fluorescence quenching studies however, suggested that removal of the iron-sulfur ([Fe(4)S(4)](3+)) cluster from the protein leads to an increase in the solvent accessibility of tryptophans, indicating change in the tertiary structure of the protein. CD studies on the holo- and apo- HiPIP also showed that removal of the metal prosthetic group drastically affects the tertiary structure of the protein. Time-resolved fluorescence decay of the wild type protein was fitted to a four-exponentials model and that of the W80N mutant was fitted to a three-exponentials model. The time-resolved fluorescence decay was also analyzed by maximum entropy method (MEM). The results of the MEM analysis agreed with those obtained from discrete exponentials model analysis. Studies on the wild type and mutants helped to assign the fast picosecond lifetime component to the W80 residue, which exhibits fast fluorescence energy transfer to the [Fe(4)S(4)](3+) cluster of the protein. Decay-associated fluorescence spectra of each tryptophan residues were calculated from the time-resolved fluorescence results at different emission wavelengths. The results suggested that W80 is in the hydrophobic core of the protein, but W60 and W76 are partially or completely exposed to the solvent.

Apoproteins↗

PubMed1995

HLA-DR residues accessible under the peptide-binding groove contribute to polymorphic antibody epitopes.

Many residues involved in polymorphic antibody-binding epitopes on class II molecules are located on the alpha-helix of DR beta chains. Although they have received less attention, residues in the peptide-binding groove and second domain of the DR beta chain may also be critical for polymorphic anti-DR antibody epitopes. In this study, we used transfectants expressing site-directed mutations at positions in the HLA-DR beta 1 and beta 2 domains and flow cytometry to define the epitopes of several polymorphic anti-DR antibodies. Both DR(beta 1*0403) residues 14 and 25 were shown to be involved in the epitopes of mAbs DA6. 164, HU-20, Q5/6, and 50D6, and DR(beta 1*0701) residue 14 was shown to be critical for the epitopes of two DR7-specific mAbs, SFR 16-DR7M and TAL13.1. Unlike most other residues shown to be important in antibody-binding epitopes, residue 14 is located in the floor of the peptide-binding groove and residue 25 is in an outer loop, each with their side chains pointing down, such that antibodies may directly contact these residues from below the binding groove. Two residues in the beta 2 domain, beta 180 and beta 181, were also shown to be involved in the epitopes of three polymorphic anti-DR mAbs, NFLD.D1, NFLD.M1, and LY9. Although these two residues are close to the transmembrane domain in the linear sequence, their solvent accessibility in the DR1 structures is quite impressive. Our data provide new evidence that residues accessible under the peptide-binding groove contribute to polymorphic antibody-binding epitopes.

Amino Acid Sequence↗

PubMed2006

Functional impacts of non-synonymous single nucleotide polymorphisms: selective constraint and structural environments.

In this work, we studied the correlations between selective constraint, structural environments and functional impacts of non-synonymous single nucleotide polymorphisms (nsSNPs). We found that the relation between solvent accessibility and functional impacts of nsSNPs is not as simple as generally thought. Finer structural classifications need to be taken into account to reveal the complex relations between the characteristics of a structure environment and its influence on the functional impacts of nsSNPs. We introduced two parameters for each structural environment, consensus residue percentage and residue distribution distance, to characterize the selective constraint imposed by the environment. Both parameters significantly correlate with the functional bias of nsSNPs across the structural environments. This result shows that selective constraint underlies the bias of a structural environment towards a certain type of nsSNPs (disease-associated or benign).

Genetic Diseases, Inborn↗

PubMed1999

ProTherm: Thermodynamic Database for Proteins and Mutants.

The first release of the Thermodynamic Database for Proteins and Mutants (ProTherm) contains more than 3300 data of several thermodynamic parameters for wild type and mutant proteins. Each entry includes numerical data for unfolding Gibbs free energy change, enthalpy change, heat capacity change, transition temperature, activity etc., which are important for understanding the mechanism of protein stability. ProTherm also includes structural information such as secondary structure and solvent accessibility of wild type residues, and experimental methods and other conditions. A WWW interface enables users to search data based on various conditions with different sorting options for outputs. Further, ProTherm is cross-linked with NCBI PUBMED literature database, Protein Mutant Database, Enzyme Code and Protein Data Bank structural database. Moreover, all the mutation sites associated with each PDB structure are automatically mapped and can be directly viewed through 3DinSight developed in our laboratory. The database is available at the URL, http://www.rtc.riken.go.jp/protherm.htm l

Calorimetry↗

PubMed2000

A detailed interpretation of OH radical footprints in a TBP-DNA complex reveals the role of dynamics in the mechanism of sequence-specific binding.

The hydroxyl radical footprint of the TATA-binding protein (TBP) bound to the high-affinity sequence TATAAAAG of the adenovirus 2 major late promoter has been quantitatively compared to a 2 ns molecular dynamics simulation of the complex in aqueous solution at room temperature using the CHARMM23 potential. The nucleotide-by-nucleotide analysis of the TBP-TATA hydroxyl radical footprint correlates with the solvent-accessible surface calculated from the dynamics simulation. The results suggest that local reactivity towards OH radicals results from the interplay between the local DNA geometry imposed by TBP binding, and the dynamics of the side-chains contacting the sugar hydrogen atoms. Analysis of the dynamics suggests that, over time, TBP forms stable interactions with the sugar-phosphate backbone through multiple contacts to different partners. This mechanism results in an enthalpic advantage to complex formation at a low entropic cost.

Adenine↗

PubMed1996

Analytically defined surfaces to analyze molecular interaction properties.

Molecular surfaces are widely used for characterizing molecules and displaying and quantifying their interaction properties. Here we consider molecular surfaces defined as isocontours of a function (a sum of exponential functions centered on each atom) that approximately represents electron density. The smoothness is advantageous for surface mapping of molecular properties (e.g., electrostatic potential). By varying parameters, these surfaces can be constructed to represent the van der Waals or solvent-accessible surface of a molecular with any accuracy. We describe numerical algorithms to operate on the analytically defined surfaces. Two applications are considered: (1) We define and locate extremal points of molecular properties on the surfaces. The extremal points provide a compact representation of a property on a surface, obviating the necessity to compute values of the property on an array of surface points as is usually done; (2) a molecular surface patch or interface is projected onto a flat surface (by introducing curvilinear coordinates) with approximate conservation of area for analysis purposes. Applications to studies of protein-protein interactions are described.

Computer Graphics↗

PubMed2002

Structural parameterization of the binding enthalpy of small ligands.

A major goal in ligand and drug design is the optimization of the binding affinity of selected lead molecules. However, the binding affinity is defined by the free energy of binding, which, in turn, is determined by the enthalpy and entropy changes. Because the binding enthalpy is the term that predominantly reflects the strength of the interactions of the ligand with its target relative to those with the solvent, it is desirable to develop ways of predicting enthalpy changes from structural considerations. The application of structure/enthalpy correlations derived from protein stability data has yielded inconsistent results when applied to small ligands of pharmaceutical interest (MW < 800). Here we present a first attempt at an empirical parameterization of the binding enthalpy for small ligands in terms of structural information. We find that at least three terms need to be considered: (1) the intrinsic enthalpy change that reflects the nature of the interactions between ligand, target, and solvent; (2) the enthalpy associated with any possible conformational change in the protein or ligand upon binding; and, (3) the enthalpy associated with protonation/deprotonation events, if present. As in the case of protein stability, the intrinsic binding enthalpy scales with changes in solvent accessible surface areas. However, an accurate estimation of the intrinsic binding enthalpy requires explicit consideration of long-lived water molecules at the binding interface. The best statistical structure/enthalpy correlation is obtained when buried water molecules within 5-7 A of the ligand are included in the calculations. For all seven protein systems considered (HIV-1 protease, dihydrodipicolinate reductase, Rnase T1, streptavidin, pp60c-Src SH2 domain, Hsp90 molecular chaperone, and bovine beta-trypsin) the binding enthalpy of 25 small molecular weight peptide and nonpeptide ligands can be accounted for with a standard error of +/-0.3 kcal x mol(-1).

Animals↗

PubMed2005

Structural dynamics of the actin-myosin interface by site-directed spectroscopy.

We have used site-directed spin and fluorescence labeling to test molecular models of the actin-myosin interface. Force is generated when the actin-myosin complex undergoes a transition from a disordered weak-binding state to an ordered strong-binding state. Actomyosin interface models, in which residues are classified as contributing to either weak or strong binding, have been derived by fitting individual crystallographic structures of actin and myosin into actomyosin cryo-EM maps. Our goal is to test these models using site-directed spectroscopic probes on actin and myosin. Starting with Cys-lite constructs of both yeast actin (ActC) and the Dictyostelium myosin II motor domain (S1dC), site-directed labeling (SDL) mutants were generated by mutating residues to Cys in the proposed weak and strong-binding interfaces. This report focuses on the effects of forming the strong-binding complex on four SDL mutants, two located in the proposed weak-binding interface (ActC5 and S1dC619) and two located in the proposed strong-binding interface (ActC345 and S1dC401). Neither the mutations nor labeling prevented strong actomyosin binding or actin-activation of myosin ATPase. Formation of the strong-binding complex resulted in decreased spin and fluorescence probe mobility at all sites, but both myosin-bound probes showed remarkably high mobility even after complex formation. Complex formation decreased solvent accessibility for both actin-bound probes, but increased it for the myosin-bound probes. These results are not consistent with a simple model in which there are discrete weak and strong interfaces, with only the strong interface forming under strong-binding conditions, nor are they consistent with a model in which surface residues become rigid and inaccessible upon complex formation. We conclude that all four of these residues are involved in the strong actin-myosin interface, but this interface is remarkably dynamic, especially on the surface of myosin.

Actins↗

PubMed1998

Structural characterization of the transition state for folding of muscle acylphosphatase.

The transition state for folding of a small protein, muscle acylphosphatase, has been studied by measuring the rates of folding and unfolding under a variety of solvent conditions. A strong dependence of the folding rate on the concentration of urea suggests the occurrence in the transition state of a large shielding of those groups that are exposed to interaction with the denaturant in the unfolded state (mainly hydrophobic moieties and groups located on the polypeptide backbone). The heat capacity change upon moving from the unfolded state to the transition state is small and is indicative of a substantial solvent exposure of hydrophobic groups. The solvent-accessibility of such groups in the transition state has also been found to be significant by measuring the rates of folding and unfolding in the presence of sugars. These rates have also been found to be accelerated by the addition of small quantities of alcohols. Trifluoroethanol and hexafluoroisopropanol were particularly effective, suggesting that stabilisation of local hydrogen bonds lowers the energy of the transition state relative to the folded and unfolded states. Finally, a study with a competitive inhibitor of acylphosphatase has provided evidence for the complete loss of ligand binding affinity in the transition state, indicating that specific long-range interactions at the level of the active site are not yet formed at this stage of the folding reaction. A model of the transition state for acylphosphatase folding, in which beta-turns and one or both alpha-helices are formed to a significant extent but in which the persistent long-range interactions characteristic of the folded state are largely absent, accounts for all our data. These results are broadly consistent with models of the transition states for folding of other small proteins derived from mutagenesis studies, and suggest that solvent perturbation methods can provide complementary information about the transition region of the energy surfaces for protein folding.

Acid Anhydride Hydrolases↗

PubMed1992

Cell membranes and multilamellar vesicles: influence of pH on solvent induced damage.

Pigment leakage from sheep and horse erythrocytes and from red beet tissue induced by non-polar solvents was determined as a function of pH. The results were compared to disruption of multilamellar vesicles (MLV) composed of phospholipids with equimolar cholesterol under identical conditions of solvent exposure and pH. Solvent access to cholesterol was used to measure vesicle disruption. MLV were made from 1,2-dioleoyl phosphatidylethanolamine, sphingomyelin (SP) and various phosphatidylcholines to simulate the major lipid components of membranes. Pigment leakage from erythrocytes caused by petroleum hydrocarbon (b.p. 60-80 degrees C) was maximal at pH 2-4 and at pH 10, but minimal at pH 6.8; alcohols caused less pigment leakage than petroleum hydrocarbon. Beta-cyanin leakage from beet tissue induced by petroleum hydrocarbon was maximal at pH 2, with very little leakage at pH 4, 6.6 and pH 10. Alcohols caused minimal damage to beet tissue above pH 2. Cholesterol removal by petroleum hydrocarbon from MLV of mixed lipid composition was maximal at pH 2-4, reduced at pH 6.8 and minimal at pH 10. Lipid mixtures in which fatty acyl side chains of one phospholipid were of a different length than the other lost more sterol than mixtures in which the acyl side chains were of identical chain length. MLV with more than 25% SP lost more sterol than those with less or no SP. Results show that in mixtures of phospholipids, SP exposes the hydrocarbon phase of a bilayer to solvent extraction, a property that was also observed in native membranes.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

PubMed1994

Molecular lipophilicity potential, a tool in 3D QSAR: method and applications.

A new method is presented to calculate the Molecular Lipophilicity Potential (MLP). The method is validated by showing that the MLP thus generated on the solvent-accessible surface can be used to back-calculate log P. Because the MLP is shown to be sensitive to conformational effects, the MLP/log P relation is best sought by taking all conformers into account. The MLP method presented here can be used as a third field in CoMFA studies, as illustrated with two series of alpha 1-adrenoceptor ligands. In the first series, the steric, electrostatic and lipophilic fields are highly intercorrelated, and taken separately yield comparable models. In the second series of ligands, the best model is obtained with the lipophilic field alone, allowing insights into ligand-receptor interactions.

Adrenergic alpha-Agonists↗