SEARCH · PubMed Health

Results for “Elastic Modulus”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37Linked to original sources

PubMed1998

Measurements of the Surface Elasticity in Medium Frequency Range Using the Oscillating Bubble Method.

Various experimental techniques are available for the investigation of dynamic surface tension, and a generally accepted theoretical model of these dynamics has been established. However, reliable rheological parameters of a fluid surface are very scarce. Therefore, comparisons of rheological parameters resulting from slow and faster processes or from theoretical calculations are required. In particular, a comprehensive experimental verification of the complex surface elasticity modulus which characterizes the dynamic behavior of a fluid surface in an appropriate manner is desirable. For this reason a new version of oscillating bubble method was developed which allows exact measurements of the complex elasticity modulus in the frequency range 3-500 Hz. With this method the assumptions of the theory of dynamic surface tension can be verified for medium frequencies. The new experimental results, in particular the experimental determination of the Gibbs elasticity, reveal that these assumptions are only approximately valid for faster processes. However, with a slight modification of the established model the experimental results can be explained. These experiments were carried out with solutions of tridecyl dimethyl phosphine oxide, fatty acids, n-alkanols, and triton X-100 at different surfactant concentrations. Copyright 1998 Academic Press.

Journal Article↗

PubMed2007

Depth-dependent mechanical properties of enamel by nanoindentation.

Nanoindentation has recently emerged to be the primary method to study the mechanical behavior and reliability of human enamel. Its hardness and elastic modulus were generally reported as average values with standard deviations that were calculated from the results of multiple nanoindentation testing. In such an approach, it is assumed that the mechanical properties of human enamel are constant, independent of testing parameters, like indent depth and loading rate. However, little is known if they affect the measurements. In this study, we investigated the dependence of the hardness and elastic modulus of human enamel on the indent depth. We found that in a depth range from 100 to 2000 nm the elastic moduli continuously decreased from approximately 104 to 70 GPa, and the hardnesses decreased from approximately 5.7 to 3.6 GPa. We then considered human enamel as a fiber-reinforced composite, and used the celebrated rule of mixture theory to quantify the upper and lower bounds of the elastic moduli, which were shown to cover the values measured in the current study and previous studies. Accordingly, we attributed the depth dependence of the hardness and modulus to the continuous microstructure evolution induced by the nanoindenter tip.

Compressive Strength↗

PubMed1987

Effects of elastase on the stiffness and elastic properties of arterial walls in cholesterol-fed rabbits.

The effect of cholesterol feeding and elastase administration on the arterial stiffness and elastic properties was investigated in rabbits by pressure-diameter tests on excised thoracic aortas, common carotid and femoral arteries. Rabbits in groups RA and RB were fed 1% cholesterol diet for 14 weeks. Groups RC and RD were fed the cholesterol diet for the first 7 weeks, and then given regular chow for the last 7 weeks. In addition, rabbits in groups RB and RC were administered elastase daily for the last 7 weeks. Rabbits in group RE were fed the regular chow for 14 weeks and served as the control group. The arterial stiffness and the elastic modulus of wall material in the RA rabbits were generally higher than those in the control rabbits. Administration of elastase and/or feeding of the regression diet decreased the wall stiffness and elastic modulus significantly, although the effect of elastase did not appear clearly when used in combination with the regression diet. The cholesterol feeding decreased the ratio of thickness to wall radius, whereas the ratio was more or less increased by the elastase administration and/or the regression diet.

Animals↗

PubMed2001

Mechanical properties of human articular disk and its influence on TMJ loading studied with the finite element method.

The present study was designed to investigate the elastic modulus of human temporomandibular joint (TMJ) disk under tension and its influences on TMJ loading. Seven human TMJ disks served as specimens. Continuous tensile stress was applied to each specimen, and the elastic moduli of human TMJ disks were calculated at 2% strain. Furthermore, using a three-dimensional finite element model of the mandible including the TMJ, changes in the TMJ stresses during clenching were evaluated in association of varying elastic moduli of the articular disk determined by the tensile tests. The elastic moduli at 2% strain varied from 27.1 to 65.2 MPa with a mean of 47.1 MPa. A significant correlation was found between the elastic moduli and age (P < 0.01). On the surface of condyle, compressive stress in the anterior area and tensile stress in the posterior area increased when the elastic moduli of the TMJ disk was varied from 25 to 65 MPa. In the TMJ disk, shear stresses in all the areas became larger with greater stiffness. In conclusion, it is shown that the elastic modulus of human TMJ disk is increased with age and that higher stiffness of the disk exerts substantial influences on mechanical loading for the TMJ structures.

Adult↗

PubMed1981

Effects of temperature on mechanical properties of composite dental restorative materials.

In the oral environment, dental restorative materials are exposed to temperatures ranging from 10 degrees to 50 degrees C. Since the properties of many polymeric materials are sensitive to temperature of this magnitude, it is important to define the effects of service temperature on the mechanical properties of polymer matrix dental composites. Six commercial composites were tested in compression at 11 temperatures, ranging from 2 degrees to 80 degrees C. The volume fraction of filler particles in the materials is either 0.45 or 0.55, and they contain a range of particle sizes and particle compositions. The tests show that ultimate strength decreases linearly with increasing temperature. Strength is higher for the lower volume fraction material and is decreased by the presence of a small percentage of very large particles. Elastic modulus and yield strength decrease sigmoidally with increasing temperature and depend only on particle volume fraction. In the clinically significant temperature range, ultimate strength decreases 14%, the decrease in elastic modulus is either 6 or 11%, and the yield strength decreases 45%. The data show that the temperature conditions of the oral environment can significantly affect the mechanical properties of composite dental restorative materials.

Biomechanical Phenomena↗

PubMed2007

Material model measurements and predictions for a random pore poly(epsilon-caprolactone) scaffold.

We investigated material models for a polymeric scaffold used for bone. The material was made by co-extruding poly(epsilon-caprolactone) (PCL), a biodegradable polyester, and poly(ethylene oxide) (PEO). The water soluble PEO was removed resulting in a porous scaffold. The stress-strain curve in compression was fit with a phenomenological model in hyperbolic form. This material model will be useful for designers for quasi-static analysis as it provides a simple form that can easily be used in finite element models. The ASTM D-1621 standard recommends using a secant modulus based on 10% strain. The resulting modulus has a smaller scatter in its value compared with the coefficients of the hyperbolic model, and it is therefore easier to compare differences in material processing and ensure quality of the scaffold. A prediction of the small-strain elastic modulus was constructed from images of the microstructure. Each pixel of the micrographs was represented with a brick finite element and assigned the Young's modulus of bulk PCL or a value of 0 for a pore. A compressive strain was imposed on the model and the resulting stresses were calculated. The elastic constants of the scaffold were then computed with Hooke's law for a linear-elastic isotropic material. The model was able to predict the small-strain elastic modulus measured in the experiments to within one standard deviation. Thus, by knowing the microstructure of the scaffold, its bulk properties can be predicted from the material properties of the constituents.

Bone Substitutes↗

PubMed2003

Relation between the elastic properties and intima-media thickness of the common carotid artery.

The purpose of the study was to describe the relation between wall elasticity and intima-media thickness in the human carotid artery prior to the development of atherosclerotic plaques. Fifty-eight apparently healthy men, aged 42-65 years (mean 55 years), without symptoms of cardiovascular disease were studied. Thickness and elastic properties of the common carotid artery wall were assessed using ultrasonography and non-invasive arterial pressure measurements. The relation between the calculated intima-media area and the pressure strain elastic modulus was positive and statistically significant on the right but not on the left side. No statistically significant relations were found between the calculated intima-media area and the stiffness or between the intima-media thickness and the elastic modulus or stiffness on either side. Thus, the relations between the common carotid artery intima-media thickness/calculated intima-media area and the common carotid artery elastic modulus/stiffness are weak. In regions without atherosclerotic plaques, the elastic properties of the human carotid artery wall do not seem to be influenced by the wall thickness in an important way.

Adult↗

PubMed1985

Skin elasticity measured by dynamic admittance. A new technique for mechanical measurements in patients with scleroderma.

A new method is presented for determining overall mechanical properties of the skin. The technique is called dynamic admittance measurement. By computerized calculations of mechanical resonance measurements, information is obtained on the elastic modulus representing the type and amount of collagen in the skin, the quality factor describing the mechanical quality (effectiveness) of the collagen, and the mechanical resistance of the viscous, non-elastic component of the skin. The method is suitable for measuring mechanical properties of small skin areas, e.g. distally on the fingers in acrosclerotic lesions of scleroderma. Highly reproducible, standardized results are obtained. In generalized scleroderma, the elastic modulus of the cutaneous network of collagen and elastin is increased, not only in clinically affected skin, but also in clinically unaffected areas, whereas the mechanical quality factor and the viscous resistance (mechanical impedance) was unaltered in scleroderma compared with normal controls. The dynamic admittance method for determining the mechanical properties of the skin in vivo may be of importance for accurate monitoring of disease status and for assessing the effect of therapy in diseases, where alterations in the mechanical properties of the skin are of significance.

Adolescent↗

PubMed2006

Elasticity of the human false vocal fold.

OBJECTIVES: Very little is known about the elasticity of the human ventricular fold (false vocal fold). To better understand the potential role of the false fold in the fluid dynamics and aeroacoustics of phonation, we made some measurements on the elastic properties of human ventricular fold tissues in vitro. METHODS: Uniaxial tensile stress-strain characteristics of 6 male and 6 female false fold specimens were quantified with sinusoidal stretch-release deformation. Midcoronal sections of 3 specimens were examined to quantify the relative densities of collagen, elastin, seromucous glandular tissue, and adipose tissue by digital image analysis. RESULTS: Nonlinear stress-strain curves with hysteresis (viscous energy loss) were observed, with large interindividual differences. A hybrid linear-exponential model was used to determine the elastic modulus (tangent Young's modulus) of the false fold. On average, the male false fold was twice as stiff as the female at a tensile strain of 20% to 30%. CONCLUSIONS: This preliminary gender-related difference in elasticity could be attributed to a higher proportion of glandular tissue in the female false fold, due to the lower elastic modulus of glands. The present data allow one to develop a more comprehensive biomechanical model of phonation, for optimizing postoperative voice production following laryngeal reconstruction procedures.

Aged↗

PubMedDate not supplied

Study of the release mechanism of diltiazem hydrochloride from matrices based on chitosan-alginate and chitosan-carrageenan mixtures.

The aim of this work was to establish the diltiazem hydrochloride release mechanism from the chitosan-alginate matrix tablet (MCB/AS) and chitosan-carrageenan matrix tablet (MCS/CSI). The weight loss for MCS/CSI is mainly due to the weight loss of the matrix while for MCB/AS it is mainly due to the diltiazem hydrochloride released from the tablet. Using the Peppa's model the release order for MCS/CSI was n = 1.07 +/- 0.13 and for MCB/AS was n = 0.76 +/- 0.02. Thus, MCS/CSI has a transport mechanism, and for MCB/AS the drug release mechanism is a combined process of diffusion and relaxation. MCB/AS has an elastic modulus (G' = 10(5) Pa) one order of magnitude higher than MCS/CSI (G' = 10(4) Pa). MCB/AS is able to uptake solvent without disrupting the microstructure due to its high elastic modulus. Instead MCS/CSI showed a quick erosion process, which conducted to the tablet disintegration due to a fast solvent uptake process.

Alginates↗

PubMed1982

The structural properties and contractile force of a clot.

When citrated plasma is recalcified, it forms a viscoelastic gel--a clot. The relationship between platelet contractility and clot rigidity was studied by using a rheological technique which simultaneously measured both the dynamic rigidity modulus and the contractile force during gel formation with platelet rich plasma (PRP). Protein network formation in a clot was accompanied by a contractile force throughout the clotting process. PRP demonstrated a maximum elastic modulus of 6,000 dynes/cm2 and a maximum contractile force/area of 1,500 dynes/cm2. The values of these parameters for a platelet-free clot (PFP) were 700 dynes/cm2 and less than 100 dynes/cm2 respectively. Sonicated control PRP and PRP from a Glanzmann thrombasthenia patient both clotted in a manner similar to PFP. Metabolic inhibitors, 2-deoxy-D-glucose and KCN (5 mM each), retarded the clotting curves of PRP. Cytochalasin B and E suppressed both structural rigidity and force generation in a concentration-dependent manner similar to their inhibitory effect on actin polymerization in platelets. Colchicine (2.5 mM) or vinblastine (0.11 mM) did not affect these clotting curves. Thrombin-activated, fixed platelets did not generate any force, nor did they significantly increase clot rigidity. Streptokinase induced a concurrent decrease of both rigidity and force in PRP clots. The elastic modulus of a PFP clot could be increased to 2,500 dynes/cm2 by externally straining the network with an axial force/area of 1,500 dynes/cm2. Our results indicate that clot structure formation in PRP is strongly coupled to the contractile force generated by the platelet microfilament system and that this force modulates clot rigidity.

Blood Coagulation↗

PubMed1987

Acid-Induced Stomatal Opening in Vicia faba L. and the Role of Guard Cell Wall Elasticity.

When epidermal peels of Vicia faba L. were treated with solutions of varying pH, stomatal aperture was significantly increased at pH 4.0, 3.0, and 2.7 in darkness, but not in light. This effect was independent of the presence of KCl in the medium. Using a short-term plasmolytic method, estimates were made of the osmotic pressure (II(i)) and the volumetric elastic modulus of guard cells, the aperture of which varied due to pretreatments at different pH, in darkness or light. In darkness, the lower pH pretreatments induced an increase in II(i) and a decrease in volumetric elastic modulus. In comparison to the response in unbuffered solutions, 10 and 25 millimolar Mes buffer at pH 6.5 significantly reduced the degree of stomatal opening induced by light or by fusicoccin. These results indicate that acid-induced stomatal opening is, at least partially, due to an increase in guard cell wall elasticity which occurs in association with changes in II(i). It is suggested that the observed inhibitory effect of Mes buffer on stomatal opening may be due to a reduction in the degree of acidification of the guard cell wall and a consequent decrease of cell wall elasticity.

Journal Article↗

PubMed1989

Physical properties of resistance vessel wall in peripheral blood flow regulation--I. Mathematical model.

A mathematical model is introduced to investigate the influence of the physical properties of the resistance vessel wall on the metabolic and myogenic mechanisms. The resistance vessel wall is assumed to have an elastic property and the elastic modulus to be a function of pressure (myogenic) and flow (metabolic). Blood is Poiseuille's flow. The resulting mathematical equations for pressure-flow, pressure-diameter, pressure-wall tension and pressure-wall elastic modulus relationships introduced obey Laplace's law. Poiseuille's law and Hooke's law. In comparison with the experimental data (pressure diameter), the mathematical model is confirmed to explain well the dynamic behavior of the resistance vessel wall in vivo.

Elasticity↗

PubMed2000

In spontaneously hypertensive rats alterations in aortic wall properties precede development of hypertension.

In hypertension arterial wall properties do not necessarily depend on increased blood pressure alone. The present study investigates the relationship between the development of hypertension and thoracic aortic wall properties in 1.5-, 3-, and 6-mo-old spontaneously hypertensive rats (SHR); Wistar-Kyoto rats (WKY) served as controls. During ketamine-xylazine anesthesia, compliance and distensibility were assessed by means of a noninvasive ultrasound technique combined with invasive blood pressure measurements. Morphometric measurements provided in vivo media cross-sectional area and thickness, allowing the calculation of the incremental elastic modulus. Extracellular matrix protein contents were determined as well. Blood pressure was not significantly different in 1.5-mo-old SHR and WKY, but compliance and distensibility were significantly lower in SHR. Incremental elastic modulus was not significantly different between SHR and WKY at this age. Media thickness and media cross-sectional area were significantly larger in SHR than in WKY, but there was no consistent difference in collagen density and content between the strains. Blood pressure was significantly higher in 3- and 6-mo-old SHR than in WKY, and compliance was significantly lower in SHR. The findings in this study show that in SHR, in which hypertension develops over weeks, alterations in functional aortic wall properties precede the development of hypertension. The decrease in compliance and distensibility at a young age most likely results from media hypertrophy rather than a change in intrinsic elastic properties.

Adrenergic alpha-Agonists↗

PubMed2005

Comparison of one-dimensional and two-dimensional functionally graded materials for the backing shell of the cemented acetabular cup.

Among the factors that have been suggested as contributing to the failure of a total joint replacement are stress shielding and the subsequent bone resorption. Recent studies have shown that when a backing shell made from a Ti alloy is used, high stresses are generated in the cement at the edges of the cup, and low stresses are generated at the dome of the bone in the acetabulum; thus, the bone at the dome suffers stress shielding and the cement edge suffers high stresses. The aim of this study was to investigate the effect of using a functionally graded material (FGM), instead of Ti alloy, for the backing shell (BS) on the stress distribution in the BS-cement-bone system. Finite-element and optimization techniques were used to obtain the optimal distribution of materials in the tangential direction only of the backing (1D FGM) as well as in the tangential and radial directions of the backing (2D FGM). It was found that the stress distribution in the BS-cement-bone system was about the same, regardless of whether the BS was fabricated from a 1D or 2D FGM. The stress-shielding factor in the bone at the dome of the acetabulum and the maximum von Mises stress in cement at the cement interfaces for 1D and 2D FGM were reduced by about 51%, 69%, and 50%, respectively, compared to the case when the shell was fabricated from a Ti alloy. The optimal elastic modulus of the 1D FGM was obtained with the materials graded from HA at the dome of the acetabulum to a Ti alloy at the rim of the shell. The optimal elastic modulus of the 2D FGM was obtained with the materials graded from Ti alloy at the right edge of the rim, to Bioglass 45S5 at the left edge of the rim, and to HA at the dome of the shell.

Bone Substitutes↗

PubMed1997

Effect of compaction temperature on consolidation of amorphous copolymers with different glass transition temperatures.

PURPOSE: The purpose of this study was to relate the combination of glass transition temperature (Tg) and temperature of measurement with the mechanical and compaction properties of some test materials. METHODS: Copolymers with different Tg'S were synthesised by free radical copolymerisation of methyl methacrylate with lauryl methacrylate. Elastic moduli were measured by dynamic mechanical analysis at different strain rates and temperatures. Compaction experiments were performed at different compaction speeds and temperatures. RESULTS: The difference between temperature of measurement and Tg appears to determine both elastic modulus and yield strength completely. They both decrease with decreasing difference between temperature of measurement and Tg and increase with strain rate. At temperatures of measurement higher than the Tg the elastic modulus is extremely low because the materials behave as rubbers. Consequently, the amount of energy stored during compaction decreases when the compaction temperature approaches the Tg and increases with strain rate. When the compaction temperature is higher than the Tg, the amount of stored energy is extremely large. The compaction experiments show that the final tablet porosity is completely determined by stress relaxation phenomena. Consequently, the final tablet porosity follows exactly the same relation as that of stored energy. CONCLUSIONS: The final tablet porosity is unequivocally determined by the amount of stored energy. This implies that tablet production at a temperature of about 20 K under the glass transition temperature of the material yields tablets with minimum porosity.

Glass↗

PubMedDate not supplied

Toothbrush abrasion of surface softened enamel studied with tapping mode AFM and AFM nanoindentation.

The aim of the present in vitro study was to investigate the toothbrush abrasion of surface softened enamel using tapping mode atomic force microscopy (TM-AFM) and AFM nanoindentation. TM-AFM investigations showed that the typical prismatic pattern as observed after demineralisation was retained after toothbrushing. The exposure to artificial saliva resulted in the deposition of a 'sausage-shape' material with random orientation. Brushing of these samples did not lead to a complete removal of this deposited material. Enamel mineral loss increased with increasing demineralisation time and increased further, although only to a small extent, due to subsequent toothbrushing. Exposure to artificial saliva did not alter the amount of enamel mineral lost due to the brushing treatment. AFM nanoindentation investigations showed that the three different demineralisation treatments caused three statistically different reductions in both surface hardness and reduced elastic modulus values, with the shortest exposure time having the least effect on the nanomechanical properties of the enamel samples. Toothbrushing did result only in a small increase in hardness and reduced elastic modulus. The present study has shown that toothbrushing of surface softened enamel leads to minor changes in the surface morphology and nanomechanical properties. The amount of enamel lost due to toothbrushing was independent of the demineralisation time and was lower compared to the mineral loss caused by the demineralisation treatments. Furthermore, the exposure to artificial saliva offers minimal protective effect to the softened enamel surface against toothbrushing.

Chelating Agents↗

PubMed2005

Material properties of human rib cortical bone from dynamic tension coupon testing.

The purpose of this study was to develop material properties of human rib cortical bone using dynamic tension coupon testing. This study presents 117 human rib cortical bone coupon tests from six cadavers, three male and three female, ranging in age from 18 to 67 years old. The rib sections were taken from the anterior, lateral, and posterior regions on ribs 1 through 12 of each cadaver's rib cage. The cortical bone was isolated from each rib section with a low speed diamond saw, and milled into dog bone shaped tension coupons using a small computer numerical control machine. A high-rate servo-hydraulic Material Testing System equipped with a custom slack adaptor, to provide constant strain rates, was used to apply tension loads to failure at an average rate of 0.5 strains/sec. The elastic modulus, yield stress, yield strain, ultimate stress, ultimate strain, and strain energy density were determined from the resulting stress versus strain curves. The overall average of all cadaver data gives an elastic modulus of 13.9 GPa, a yield stress of 93.9 MPa, a yield strain of 0.88 %, an ultimate stress of 124.2 MPa, an ultimate strain of 2.7 %, and a strain energy density of 250.1 MPa-microstrain. For all cadavers, the plastic region of the stress versus strain curves was substantial and contributed approximately 60 % to the strain energy and over 80 % in the tests with the 18 year old cadaver. The rib cortical bone becomes more brittle with increasing age, shown by an increase in the modulus (p < 0.01) and a decrease in peak strain (p < 0.01). In contrast to previous three-bending tests on whole rib and rib cortical bone coupons, there were no significant differences in material properties with respect to rib region or rib level. When these results are considered in conjunction with the previous three-point bending tests, there is regional variation in the structural response of the human rib cage, but this variation appears to be primarily a result of changes in the local geometry of each rib while the material properties remain nearly constant within an individual.

Journal Article↗