PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Spectrum Analysis, Raman”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37Linked to original sources

Polarized IR and Raman spectra and ab initio calculations for bis(guanidine) zirconium bis(nitrilotriacetate) hydrate single crystal [C(NH2)3]2[Zr[N(CH2COO)3]2](H2O)--the new laser Raman converter.

Fourier transform polarized IR and Raman spectra of bis(guanidine) zirconium bis(nitrilotriacetate) hydrate single crystal [C(NH(2))(3)](2)[Zr[N(CH(2)COO)(3)](2)](H(2)O) have been measured in the regions 30-4000 and 80-4000 cm(-1) and correlated with X-ray structural data. The factor group analysis has been applied in the discussion of the dichroic dependence of the vibrational modes. The assignment of the internal vibrations for the [Zr(nitrilotriacetate)2]2- complex ion has been based on the ab initio quantum chemical calculations. The usefulness of the studied crystal as Raman laser converter was analyzed basing on the comparison of the spontaneous and stimulated Raman spectra.

Cations↗

On-line detection of cholesterol and calcification by catheter based Raman spectroscopy in human atherosclerotic plaque ex vivo.

BACKGROUND: Raman spectroscopy has the unique potential to detect and quantify cholesterol and calcification in an atherosclerotic plaque in vivo. OBJECTIVE: To evaluate the sensitivity and specificity of this technique for detecting cholesterol or calcification in human coronary artery and aorta specimens ex vivo, using a compact clinical fibreoptic based Raman system developed for in vivo applications. DESIGN: From nine coronary arteries and four aorta specimens, 114 sites were evaluated for the presence of cholesterol and calcification by Raman spectroscopy and standard histology. Raman spectra were acquired and evaluated on-line in around five seconds. RESULTS: The correlation between Raman spectroscopy and histology was r = 0.68 for cholesterol and r = 0.71 calcification in the plaque (p < 0.0001). Sensitivity and specificity for detecting cholesterol and calcification were excellent: receiver operating characteristic (ROC) analysis for each of the components revealed areas under the curves of > 0.92 (p < 0.0001). At the optimal cut-off values determined by ROC analysis, positive predictive values of > 80% and negative predictive values of > 90% were obtained. CONCLUSIONS: On-line real time catheter based Raman spectroscopy detects accumulation of cholesterol and calcification in atherosclerotic plaque with high sensitivity and specificity.

Calcinosis↗

Polymorphism of sulfathiazole.

The polymorphism of sulfathiazole has been reexamined. The issue of the separate existence of two of the forms, forms III and IV, has now been definitively resolved: both forms exist. Single crystals were used to generate X-ray diffraction patterns, equivalent to those normally obtained from polycrystalline samples, using the ingenious Gandolfi camera. The patterns obtained were distinct and in agreement with the theoretical powder patterns calculated from the reported structures of the two forms, thus confirming the separate existence. Disagreement between the results of previous workers has been traced to two main causes: characterization techniques are not very discriminating for the two forms (III and IV), and the samples examined have invariably been mixtures of III and IV, since the two forms usually crystallize together. Furthermore, crystals of form III exhibit marked preferred orientation, which complicates powder X-ray diffraction (PXRD) analysis. The IR, Raman, and 13C NMR spectra, and PXRD patterns are reported for all four forms. These distinct fingerprints should now enable one to isolate pure samples and to study the properties and the relationships between these forms with full confidence.

Calorimetry, Differential Scanning↗

Raman spectroscopic analysis of the Maya wall paintings in Ek'Balam, Mexico.

Raman spectroscopy has been applied to the examination of wall painting fragments from the archaeological site of Ek'Balam (Yucatán, Mexico). Thirty-three samples have been studied, all originating from room 23 of the Acropolis, and being representative of the painting technique at Ek'Balam during the late Classic Maya period. Several pigments such as haematite, calcite, carbon, cinnabar and indigo were identified in these samples. The latter pigment was presumed to be present as 'Maya blue', which is an intercalation product of indigo and palygorskite clay. The observed Raman spectra are reported and some band assignments have been made. This survey is the first Raman spectroscopic examination of a whole set of pigments in archaeological Maya wall painting fragments.

History, Ancient↗

Semiempirical and Raman spectroscopic studies of carotenoids.

Semiempirical AM1 calculations have been carried out for beta-carotene and the three xanthophylls (zeaxanthin, canthaxanthin, and astaxanthin) containing oxygen functions (hydroxy/keto groups) found in the majority of natural pigment. The fully optimized geometries correspond well with the X-ray structures of beta-carotene and canthaxanthin and indicate that substitutions on the terminal rings have a minimal effect on the conformation of the chromophore. Twisting along the polyenic chain results from steric interaction involving methyl substituents, and a Ci point group can be proposed for the four investigated carotenoids. AM1 calculated excitation energies for the strongly allowed excited states can be compared to with the experimental absorption band in the visible region, considering solvent effect. Resonance Raman (RR) and Fourier transform (FT) Raman spectra of natural astaxanthin as well as astaxanthins specifically 13C labeled at the positions 12,12'; 13,13'; 14,14'; 15,15'; 15, and 20,20' were recorded. Furthermore the RR and FT Raman spectra of the asymmetric carotenoid 20-norastaxanthin are presented. The data reveal a substantial amount of information about the coupling between the different vibrations, and enabled an extensive experimental verification of the theoretical normal-coordinate analysis previously performed on polyenic molecules [J Raman Spectrosc 1983, 14, 310-321; Advances in Infrared and Raman Spectroscopy, Vol. 12, 1985, pp. 115-178; Spectrochim Acta 1996, 53, 381-392; Biochim Biophys Acta 1994, 1185, 188-196]. The results make up a very interesting dataset which allowed the interpretation and/or observation of several, hitherto never observed or not well understood, effects in the Raman spectra of the differently labeled astaxanthins.

Absorption↗

Vibrational spectra and ab initio analysis of tert-butyl, trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene II. 3,3-Dimethyl-1,2-bis(trimethylsilyl)cyclopropene.

The IR and Raman spectra of 3,3-dimethyl-1,2-bis(trimethylsilyl)cyclopropene (I) (synthesised using standard procedures) were measured in the liquid phase. Total geometry optimisation was performed at the HF/6-31G* level. The HF/6-31G*//HF/6-31G* quantum mechanical force field (QMFF) was calculated and used to determine the theoretical fundamental vibrational frequencies, their predicted IR intensities, Raman activities, and Raman depolarisation ratios. Using Pulay's scaling method and the theoretical molecular geometry, the QMFF of I was scaled by a set of scaling factors used previously for 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene (17 scale factors for a 105-dimensional problem). The scaled QMFF obtained was used to solve the vibrational problem. The quantum mechanical values of the Raman activities were converted to differential Raman cross sections. The figures for the experimental and theoretical Raman and IR spectra are presented. Assignments of the experimental vibrational spectra of I are given. They take into account the calculated potential energy distribution and the correlation between the estimations of the experimental IR and Raman intensities and Raman depolarisation ratios and the corresponding theoretical values (including Raman cross sections) calculated using the unscaled QMFF.

Cyclopropanes↗

Vibrational analysis of hydroxyacetone.

In order to be able to fully understand the vibrational dynamics of monosaccharide sugars, we started with hydroxyacetone CH2OHCOCH3, and glycolaldehyde CH2OHCOH, which are among the smallest molecules that contain hydroxyl and carbonyl group on neighboring carbon atoms. This sterical configuration is characteristic for saccharides and determines their biochemical activity. In this work vibrational analysis of hydroxyacetone was undertaken by performing the normal coordinate analysis for glycolaldehyde first, and transferring these force constants to hydroxyacetone. The observed Raman and infrared bands for 90 wt.% solution of hydroxyacetone in water (acetol) were used as a first approximation for the bands of free hydroxyacetone. The number of observed Raman and infrared bands for acetol exceeds the number of calculated values for the most stable hydroxyacetone conformer with Cs symmetry, which suggests more than one conformer of hydroxyacetone in water solution. In particular, there are two bands both in infrared (1083 and 1057 cm(-1)) and in Raman spectrum (1086.5 and 1053 cm(-1)) that are assigned to the CO stretching mode and this is one of the indicators of several hydroxyacetone conformers in the solution. Additional information was obtained from low temperature Raman spectra: at 240 K a broad asymmetric band centered around 280 cm(-1) appears, suggesting a disorder in the orientation of hydroxyl groups. Glassy state forms at approximately 150K. The broad band at 80 cm(-1) is assigned to frozen torsions of hydroxymethyl groups.

Acetaldehyde↗

Characterization of flavocytochrome C552 from the thermophilic photosynthetic bacterium Chromatium tepidum.

A M(r) 68 kDa flavocytochrome c552 has been isolated from the thermophilic photosynthetic purple sulfur bacterium Chromatium tepidum and shown to consist of a M(r) 25 kDa subunit that contains two covalently bound heme c and a M(r) 43 kDa subunit that probably contains a single FAD. The prosthetic group content, absorbance spectra, and subunit composition of the C. tepidum flavocytochrome are quite similar to those previously reported for the flavocytochrome c552 isolated from a mesophilic Chromatium species, Chromatium vinosum. The oxidation-reduction properties of the hemes present in the C. tepidum flavocytochrome have been characterized by titrations, the effect of temperature on the catalytic activity of the protein has been investigated, and the heme environment has been characterized using resonance Raman spectroscopy.

Chromatium↗

Deciphering the finger prints of brain cancer astrocytoma in comparison to astrocytes by using near infrared Raman spectroscopy.

To explore the biochemical differences between brain cancer cells Astrocytoma and normal cells Astrocyte, we investigated the Raman spectra of single cell from these two cell types and analyzed the difference in spectra and intensity. Raman spectrum shows the banding pattern of different compounds as detected by the laser. Raman intensity measures the intensity of these individual bands. The Raman spectra of brain cancer cells was similar to those of normal cells, but the Raman intensity of cancer cells was much higher than that of normal cells. The Raman spectra of brain cancer Astrocytoma shows that the structural changes of cancer cells happen so that many biological functions of these cells are lost. The results indicate that Raman spectra can offer the experimental basis for the cancer diagnosis and treatment.

Astrocytes↗

Synthesis and characterization of surface-enhanced Raman scattering tags with Ag/SiO2 core-shell nanostructures using reverse micelle technology.

A novel simplified method for synthesis of surface-enhanced Raman scattering tags has been reported. This synthesis method is based on reverse micelle technique using Igepal CO-520 as a surfactant and the mixed solution of silver nitrate and rhodamine dyes with isothiocyanate group as water pool followed by hydrazine hydrate reduction and TEOS polymerization leading to the formation of silica layer surrounding the silver core. Compared to the method reported in literature, the proposed methodology eliminates the necessity of vitrophilic pretreatment and makes it possible to complete all different processes including the preparation of silver nanoparticles, the conjugation of dye molecules and the formation of silica shell in the microreactor. The nanoparticle-based surface-enhanced Raman tags obtained are composed of silver core conjugated with rhodamine dyes and an encasing silica shell. Both the dyes themselves and the Ag/SiO2 core-shell nanoparticles without the encapsulation of dyes exhibit no Raman signals. However, the Ag/SiO2 core-shell nanoparticles exhibit strong Raman signals when encapsulated with these dyes. This is due to the appearance of fluorescence quenching and surface-enhanced Raman scattering effect resulting from the conjugation of dyes and silver core. The Raman tags were characterized using transmission electron microscopy (TEM), UV-visible absorption spectrometry, and Raman spectrometry.

Metal Nanoparticles↗

Raman spectroscopy of coated pharmaceutical tablets and physical models for multivariate calibration to tablet coating thickness.

Raman spectra of a set of coated pharmaceutical tablets were analyzed for the purpose of calibrating the spectra to tablet coating thickness. Acetaminophen tablets were coated with a hydroxypropylmethylcellulose/polyethylene glycol film coating whose thickness was varied from 0 to 6% weight gain. Coatings were also prepared with two concentrations of TiO2 at several film thicknesses. The resulting spectral data set was analyzed using several different multivariate calibration procedures. The procedures examined in this study included spectral correction followed by target factor analysis, spectral correction with baseline subtraction followed by principal component regression, and first derivative computation followed by principal component regression. The results demonstrate that target factor analysis is a viable method for calibration of Raman spectra to tablet coating thickness. Calibration based on derivative spectra resulted in linear correlation that was equal to that of the results of target factor analysis for coatings without TiO2. However, target factor analysis was found to be superior to other methods when TiO2 was present in the tablet coatings. The effect of sample fluorescence on each of these chemometric methods was also examined. It was found that when photobleaching of fluorescent impurities due to exposure to the Raman excitation source was controlled, the tablet coating thickness could be calibrated to the intensity of the fluorescence signal. The results also demonstrate that for the samples examined here, calibration by target factor analysis is insensitive to variation in fluorescent intensity when the tablet coating emission spectrum is included in the matrix of target vectors.

Acetaminophen↗

Characterization of amino acids using Raman spectroscopy.

A key process in the development of new drugs is elucidation of the interaction between the drug molecule and the target protein. Such knowledge then makes it possible to make systematic structural modifications of the drug molecule to optimize the interaction. Many analytical techniques can be applied to proteins in solution such as circular dichroism, ultraviolet, and fluorescence spectroscopy but these all have limitations. In this paper, we investigate the feasibility of using relatively simple, visible light Raman spectroscopic methods to investigate amino acids and related biopolymers.

Amino Acids↗

Pulsed remote Raman system for daytime measurements of mineral spectra.

A remote Raman system has been developed utilizing a 532nm pulsed laser and gated intensified charged couple device (ICCD) detector in the oblique geometry. When the system is set for 50m sample distance it is capable of measuring Raman spectra of minerals located at distances in the range of 10-65m from the telescope. Both daytime and nighttime operations are feasible and the spectra of minerals can be measured in a short period of time, of the order of a few seconds. In oblique geometry, measured sampling depth is more than 30m, during which the system maintains very high performance without any adjustments. Much longer sampling depth (0.1-120m) has been observed when the system is configured in the coaxial geometry. Clear advantages of using a gated detection mode over the continuous (CW) mode of operation in reducing the background signal and eliminating long-lived fluorescence signals from the Raman spectra are presented. The performance of the pulsed Raman system is demonstrated by measuring spectra of Raman standards including benzene (C(6)H(6)) and naphthalene (C(10)H(8)), a low Raman cross section silicate mineral muscovite (KAl(2)(Si(3)Al)O(10)(OH)(2)), and a medium Raman cross section mineral calcite (CaCO(3)).

Benzene↗

Raman spectroscopic studies on tropolone complexes with La, Nd, Sm, Yb.

The complexes of tropolone (HL) with different lanthanide metals of lanthanum (La), neodymium (Nd), samarium (Sm), ytterbium (Yb) have been prepared respectively in the non-aqueous solution by the direct electrochemical oxidation of sacrificial metal anodes, and characterized by normal Raman spectroscopy. By comparing the spectra of the ligands and their complexes, the stretching vibrational band of OH disappeared in complexes, and the frequencies shifts of some relevant bands were observed, particularly for the stretching vibration of CO. In the low frequency region, new metal ion sensitive bands at 400-700 cm(-1) were observed, which could be assigned to the stretching vibrational mode of the bonding of lanthanide with oxygen. The stretching vibration of lanthanide-oxygen of tropolonate complexes showed a metal ion sensitivity. All the obvious change in spectral feature of Raman spectra revealed that CO and OH were coordinated with the center metal ions through oxygen atoms. Based on Raman results, the structures of the above complexes were proposed.

Chelating Agents↗

Structural characterization of heme sites in spinach cytochrome b6f complexes: a resonance Raman study.

Resonance Raman spectra of cytochrome b6f complexes isolated from spinach chloroplasts have been obtained. Selective resonance enhancements and partial reductions of the complex by redox mediators were used to isolate and identify the contributions of heme b6 and heme f sites to the observed spectra. Corresponding spectra for turnip cytochrome f have also been obtained. Power-dependent photoreduction was observed in cytochrome f of the complex as well as in the isolated cytochrome f during the course of the Raman experiments.

Cytochromes↗