SEARCH · PubMed Health

Results for “BORIC ACID”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources

PubMed2003

Development of a capillary electrophoretic method for the analysis of amino acids containing tablets.

Ketosteril is an enteral medicinal product indicated for prevention and therapy in chronic renal insufficiency in connection with a low protein diet. Tablets of Ketosteril contain five essential amino acids like: Lys, His, Thr, Trp, Tyr and another five amino acids in the form of their hydroxy and keto analogues as calcium salts, that are: alpha-ketoleucine, alpha-ketoisoleucine, alpha-ketovaline, alpha-ketophenylalanine and alpha-hydroxymethionine. The composition of Ketosteril tablets is routinely tested with three LC methods. Capillary electrophoretic method seems to be a good alternative for amino acids and their analogues determination in multicomponent pharmaceuticals because of short analysis time and the possibility to assay all components during a single run without any pretreatment. Electrophoresis was performed in 50 microm I.D. fused-silica capillaries with 65 cm distance to the detector. Capillaries were installed in Waters Quanta 4000 electrophoretic equipment with a positive power supply and on-line UV detection at 214 nm. Separations were done in a buffer containing 40 mM Tris and 160 mM boric acid titrated with NaOH to pH 10. The method developed allows the separation of all investigated analytes with an efficiency of n = 230,000 and 20 min analysis time. The method was applied for determination of all components of Ketosteril in commercial tablets.

Amino Acids↗

PubMed2004

[Enantioseparation of tropicamide by capillary electrophoresis with square wave amperometric detection].

An enantioseparation method for tropicamide by high performance capillary electrophoresis with square wave amperometric detection (SWAD) was developed. The enantiomers of tropicamide were baseline separated in 16 min with an uncoated fused-silica capillary (75 microm i.d. x 50 cm) under the optimum conditions: 7 mmol/L Tris-10 mmol/L citric acid-2 mmol/L H3BO(3)-15 mmol/L beta-cyclodextrin (beta-CD) (pH 3.0) as background electrolyte, SWAD balance potential (E(b)) + 0.80 V (vs. Ag/AgCl), separation voltage 15 kV, injection height 20 cm, and injection time 10 s. The calibration curve of the enantiomers showed good linearity in the range from 5 micromol/L to 750 micromol/L with detection limit of 2 micromol/L. The average recoveries of added standards were 96% - 103%. The effects of the concentrations of beta-CD and the boric acid, the pH of the background electrolyte on resolutions (Rs) of the enantiomers were discussed in details. The proposed method was applied to the determination of a commercial tropicamide eye-drops sample without pre-treatment, and satisfactory results were obtained.

Electrochemistry↗

PubMed2000

An investigation into the release of cefuroxime axetil from taste-masked stearic acid microspheres. III. The use of DSC and HSDSC as means of characterising the interaction of the microspheres with buffered media.

Stearic acid coated cefuroxime axetil (SACA) microspheres have been studied using differential scanning calorimetry (DSC) and high sensitivity DSC (HSDSC) in order to examine the interaction between the spheres and a range of buffer systems, with a view to further enhance the understanding of the mechanism of drug release developed in earlier studies [Robson et al., 1999, 2000]. DSC studies indicated that after immersion in Sorensens modified phosphate buffer (SMPB) pH 5.9 followed by washing and drying, no change in the thermal properties of the spheres was detected up to 60 min of immersion, with a single endotherm noted at circa 56 degrees C, that corresponded to the melting of the stearic acid used in this study; similar results were obtained for systems immersed in distilled water. After immersion in SMPB pH 7.0 and 8.0, however, a second peak was noted at approximately 67 degrees C that increased in magnitude relative to the lower temperature endotherm with increasing exposure time to the medium. Spheres that had not been previously washed prior to drying showed complete conversion to the higher temperature endotherm for these two buffers. Systems which had been exposed to a range of pH 7.0 buffers (citrate-phosphate buffer (CPB), phosphate buffer mixed (PBM), boric acid buffer (BAB)) were then examined. Only the CPB systems showed evidence for conversion to the higher melting form. PBM systems to which further sodium had been added were then examined. A maximum conversion was found at 0.05 M sodium, which was in agreement with the maximum in release rate found in a previous study [Robson et al., 2000]. HSDSC was then used to examine systems that were immersed in the buffer. For SMPB, pH 5.9 and distilled water, only the endotherm corresponding to the stearic acid melting was seen. However, for SMPB pH 7.0 and 8.0, three peaks were seen, two corresponding to those seen for the DSC studies and a further lower temperature peak at circa 44 degrees C. Studies on PBM systems to which additional sodium had been added showed small levels of conversion to the higher temperature form at higher sodium contents. The data was discussed in terms of the correlation with earlier dissolution studies on the same systems [Robson et al., 1999; 2000].

Buffers↗

PubMed2006

Ammonia and nitrous oxide emissions from two acidic soils of Nova Scotia fertilised with liquid hog manure mixed with or without dicyandiamide.

Gaseous nitrogen (N) loss from field-applied manure in the form of ammonia (NH(3)) and nitrous oxide (N(2)O) has negative agronomic, environmental and health implications. This study was undertaken to evaluate the combined effect of soil type and dicyandiamide (DCD) on NH(3) and N(2)O emissions following application of liquid hog manure. Soil samples (100g) were placed in 500 mL screw-top Mason-jars and de-ionised water was added to bring the soil samples to 50%, 70% and 90% water-filled pore space (WFPS). Slurry and slurry+DCD treatments were applied at a rate of 116000 l ha(-1). The jars were then sealed and incubated at 21 degrees C for 21 d. Ammonia volatilisation was quantified using boric acid traps while N(2)O gas concentrations were analysed using gas chromatography. Results showed that DCD had no effect (p>0.05) on either NH(3) or N(2)O emissions. However, soil type had a significant effect (p<0.05) on both gases. Overall, the Pugwash soil produced 3 and 2.5 times more NH(3) and N(2)O, respectively, than the Acadia soil. N(2)O emissions from both soils increased with an increase in %WFPS, indicating that during the spring and fall in Atlantic Canada, when soils are generally wet, a significant amount of N(2)O may be emitted from these soils. The relationship between cumulative N(2)O and %WFPS was best described by an exponential function R(2)=0.83 and p<0.05 (both soils). Therefore, soil type should be taken into consideration when formulating N(2)O emission factors. The addition of DCD together with slurry may not be a viable strategy to mitigate N(2)O emissions from acidic soils. To reduce emissions of both gases, livestock slurry should not be applied on wet soils.

Acids↗

PubMedDate not supplied

Production of structured lipids by acidolysis of an EPA-enriched fish oil and caprylic acid in a packed bed reactor: analysis of three different operation modes.

Structured triacylglycerols (ST) enriched in eicosapentaenoic acid (EPA) in position 2 of the triacylglycerol (TAG) backbone were synthesized by acidolysis of a commercially available EPA-rich oil (EPAX4510, 40% EPA) and caprylic acid (CA), catalyzed by the 1,3-specific immobilized lipase Lipozyme IM. The reaction was carried out in a packed bed reactor (PBR) operating in two ways: (1) by recirculating the reaction mixture from the exit of the bed to the substrate reservoir (discontinuous mode) and (2) in continuous mode, directing the product mixture leaving the PBR to a product reservoir. By operating in these two ways and using a simple kinetic model, representative values for the apparent kinetic constants (kX) for each fatty acid (native, Li or odd, M) were obtained. The kinetic model assumes that the rate of incorporation of a fatty acid into TAG per amount of enzyme, rX (mole/(h g lipase)) is proportional to the extent of the deviation from the equilibrium for each fatty acid (i.e., the difference of concentration between the fatty acid in the triacylglycerol and the concentration of the same fatty acid in the triacylglycerol once the equilibrium of the acidolysis reaction is reached). The model allows comparing the two operating modes through the processing intensity, defined as mLt/(V[TG]0) and mL/(q[TG]0), for the discontinuous and continuous operation modes, respectively. In discontinuous mode, ST with 59.5% CA and 9.6% EPA were obtained. In contrast, a ST with 51% CA and 19.6% EPA were obtained when using the continuous operation mode. To enhance the CA incorporation when operating in continuous mode, a two-step acidolysis reaction was performed (third operation mode). This continuous two-step process yields a ST with a 64% CA and a 15% EPA. Finally, after purifying the above ST in a preparative silica gel column, impregnated with boric acid, a ST with 66.9% CA and 19.6% EPA was obtained. The analysis by reverse phase and Ag+ liquid chromatography of the EPA-enriched ST demonstrated that the CA was placed in positions 1 and 3 and the EPA was occupying position 2 of the final ST.

Acids↗

PubMed1998

Optimized determination of carbohydrate-deficient transferrin isoforms in serum by capillary zone electrophoresis.

Carbohydrate deficient transferrin (CDT) is one of the most reliable markers of chronic alcohol abuse. It consists of a group of minor isoforms of human transferrin (the main iron transport serum protein) deficient in sialic acid groups (asialo, monosialo and disialo) with a pI > 5.7, while the main isotransferrin (tetrasialo) has a pI of 5.4. The aim of the present work was to develop a capillary electrophoretic method to determine CDT in serum, suitable for routine use as a confirmatory technique of the current screening methods based on immunoassays. Serum samples (0.5 mL) were saturated with iron by incubation with 10 mM FeCl3 (9 microL) and 500 mM NaHCO3 (12 microL) for 30 min, then diluted 1/10 in water and injected by positive pressure (0.5 psi for 10 s). Separation was performed with a capillary zone electrophoretic method using bare fused-silica capillaries (20 microm ID, 37 cm in length) and a buffer composed of 100 mM sodium tetraborate adjusted with boric acid to pH 8.3. Applied voltage was 10 kV and temperature 25 degrees C. Detection was by UV absorption at 200 nm wavelength. Under the described conditions, asialo-, monosialo-, disialo-, trisialo- and tetrasialo-transferrin were separated in human serum. The limit of detection (signal-to-noise ratio of 2) was about 0.3% for disialo-transferrin, and 0.4% of trisialo-transferrin, expressed as percentages of the terasialo-transferrin peak area. Relative standard deviations (RSD) of absolute migration times were < 1%, while RSD of relative migration times (on the basis of tetrasialo-transferrin) were < 0.1%. Intra-day and day-to-day peak quantitation precision studies showed RDS ranging from 4 to 9% and from 13 to 24% for disialo- and trisialo-transferrin, respectively. The results from 30 control subjects, including social drinkers, and 13 alcoholics showed disialo- and trisialo-transferrin significantly increased in patients by a factor of about 4.5 (P < 0.0001).

Adult↗

PubMed2001

A new fluorimetric method for the determination of formaldehyde in air based on the liquid droplet sampling technique.

A new, simple, sensitive, selective and in-field fluorimetric method for the determination of formaldehyde is proposed. The reaction of formaldehyde with hydralazine in acidic medium, heating on a boiling water-bath for 25 min, produces s-triazolo[3,4-a]phthalazine (Tri-P). The fluorescence intensity of the product formed (Tri-P) was determined at lambda em = 389 nm with lambda ex = 236 nm. The fluorescence intensity is linear over a formaldehyde concentration range of 1.2-33.0 micrograms l-1. The proposed method was applied successfully to the determination of formaldehyde sampled from the atmosphere using the liquid droplet technique. Formaldehyde vapour in a wind tunnel was produced by a mean of permeater. A linear curve was obtained between the concentration in the wind tunnel and that in the droplet. The detection limit for formaldehyde was 2.0 micrograms l-1 with RSDs varying from 3 to 12% in ambient air, using a droplet correction solution (boric acid and hydralazine). The effect of interfering substances on the determination shows that most cations and anions did not interfere. The results obtained were satisfactory compared with a reference method.

Air Pollutants↗

PubMed2006

Background electrolytes in 50% methanol/water for the determination of acidity constants of basic drugs by capillary zone electrophoresis.

The acidic dissociation constants of several hydrophobic drugs, amiodarone and a series of antidepressants that show a secondary or tertiary amino group, were determined in a 50% methanol/water mixture by capillary zone electrophoresis. The electrophoretic behavior of buffers prepared from sodium acetate, tris(hydroxymethyl) aminomethane hydrochloride, sodium hydrogenphosphate, ammonium chloride, ethanolamine, butilammonium chloride, and sodium borate in the hydroalcoholic solution was tested. Thus, all of them follow the Ohm's law until about 25 kV and, therefore, they can be used without significant Joule heat dissipation at 20 kV. For the studied drugs, buffers prepared with phosphate or borate give effective mobility measurements lower than those from other buffers. The wide pKa range of the studied drugs provides a wide pH range where the protonated forms of the amino compounds coexist with hydrogenphosphate ions and where the neutral amines coexist with boric acid. The decrease of the experimental effective mobilities in these instances can be explained through the interactions between coexisting species. Therefore, phosphate and borate buffers should be avoided to determine the mobility of amines with aqueous pKa higher than 8, at least in solutions with high methanol content. Independent measurements of acidic dissociation constants of drugs validate this statement.

Amiodarone↗

PubMed1997

gamma-Glutamyl transpeptidase-dependent lipid peroxidation in isolated hepatocytes and HepG2 hepatoma cells.

Gamma-glutamyltranspeptidase (GGT), a plasma membrane-bound enzyme, provides the only activity capable to effect the hydrolysis of extracellular glutathione (GSH), thus favoring the cellular utilization of its constituent amino acids. Recent studies have shown however that in the presence of chelated iron prooxidant species can be originated during GGT-mediated metabolism of GSH, and that a process of lipid peroxidation can be started eventually in suitable lipid substrates. The present study was undertaken to verify if a GGT-dependent lipid peroxidation process can be induced in the lipids of biological membranes, including living cells, and if this effect can be sustained by the GGT highly expressed at the surface of HepG2 human hepatoma cells. In rat liver microsomes (chosen as model membrane lipid substrate) exposed to GSH and ADP-chelated iron, the addition of GGT caused a marked stimulation of lipid peroxidation, which was further enhanced by the addition of the GGT co-substrate glycyl-glycine. The same was observed in primary cultures of isolated rat hepatocytes, where the lipid peroxidation process did not induce acute toxic effects. GGT-stimulation of lipid peroxidation was dependent both on the concentration of GSH and of ADP-chelated iron. In GGT-rich HepG2 human hepatoma cells, the exposure to GSH, glycyl-glycine, and ADP-chelated iron resulted in a nontoxic lipid peroxidation process, which could be prevented by means of GGT inhibitors such as acivicin and the serine-boric acid complex. In addition, by co-incubation of HepG2 cells with rat liver microsomes, it was observed that the GGT owned by HepG2 cells can act extracellularly, as a stimulant on the GSH- and iron-dependent lipid peroxidation of microsomes. The data reported indicate that the lipid peroxidation of liver microsomes and of living cells can be stimulated by the GGT-mediated metabolism of GSH. Due to the well established interactions of lipid peroxidation products with cell proliferation, the phenomenon may bear particular significance in the carcinogenic process, where a relationship between the expression of GGT and tumor progression has been envisaged.

Animals↗

PubMed1976

Patulous Eustachian tube. A new treatment with infusion of absorbable gelatin sponge solution.

For the treatment of abnormally patent Eustachian tube, we had previously employed repeated tubal insufflation of salicylic acid-boric powder (1:4) through a Eustachian tube catheter. Such treatments, however, usually were associated with uncertain results and numerous complications. Therefore, treatment of this condition was changed to employment of an infusion of absorbable gelatin sponge solution directly into the Eustachian tube. Twenty-two ears in 16 patients recovered successfully when this method was used.

Adult↗

PubMed1999

Analysis of morphine and morphine-3beta-D glucuronide in human urine by capillary zone electrophoresis with minimal sample pretreatment.

The presence of two of the metabolites of heroin, free morphine and morphine 3-beta-D-glucuronide (MO3G) in acidified urine samples was simultaneously determined by capillary zone electrophoresis (CZE). In a run buffer containing 50 mM sodium borate and 250 mM boric acid (pH 8.6), free morphine migrates before a group of neutral compounds (peak N) in urine, which move with the velocity of electro-osmotic flow. In contrast, the glucuronidated form is negatively charged and migrates behind peak N. Both analytes can be precisely identified within their respective analytical window by their migration time with respect to peak N. The on-line multi-wavelengths scanning of the peak permits further confirmation. The detection sensitivity of both analytes was increased three-four fold if the samples were introduced with electro-injection as compared with hydrodynamic injection. Limits of detection (LOD) of free and conjugated morphine using electro-injection were 200 ng/mL and 500 ng/mL, respectively, determined at a 3:1 signal to noise ratio. A dramatic increase of free morphine was observed after acid hydrolysis of the urine concomitantly with the decrease of the glucuronidated form. We conclude that CZE is a rapid, simple, sensitive and useful screening technique for detection of heroin metabolites in the urine.

Calibration↗

PubMed1999

Microchannel electrophoretic separation of biogenic amines by micellar electrokinetic chromatography.

Fast, efficient separation of most common biogenic amines was successfully performed on a glass microchip capillary electrophoresis device. The amines putrescine, histamine, tyramine, cadaverine, phenethylamine, tryptamine, spermidine and spermine were derivatized prior to fluorescence detection with fluorescein isothiocyanate. Separation was carried out using a channel length of 28 mm, a cross section of 50 x 8 microm, and a field strength of 600 V/cm. After optimization of buffer electrolyte conditions (120 mM boric acid, pH 9.4, modified with 40 mM SDS), fluorescein thiocarbamyl amine derivatives were successfully resolved. Analysis time was as short as 75 s. Determination of the biogenic amines was achieved in soy sauce samples.

Biogenic Amines↗

PubMed2000

Quantitative analysis of leptin mRNA using competitive reverse transcription polymerase chain reaction and capillary electrophoresis with laser-induced fluorescence detection.

Leptin, the protein hormone product of the obese (ob) gene, functions in the regulation of appetite, energy expenditure, and reproduction in animals and humans. Since changes in the level of circulating leptin can have marked physiological consequences, it is important to be able to accurately quantify leptin gene expression. Toward this goal, we have constructed a chicken leptin RNA competitor and successfully employed it as an internal standard in the development of a quantitative-competitive reverse transcription polymerase chain reaction (QC-RT-PCR) assay for leptin mRNA. Capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) was utilized for the separation and analysis of chicken leptin target (261 bp) and competitor (234 bp) dsDNA products from QC-RT-PCR assay samples. Leptin amplicons were separated using a DB-1 coated capillary (27 cm x 100 microm ID) at a field strength of 300 V/cm in a replaceable sieving matrix consisting of 0.5% hydroxypropylmethyl cellulose (HPMC) in 1 x TBE (89 mM Tris-base, 89 mM boric acid, 2 mM EDTA, pH 8.3) buffer with 0.5 microg/mL EnhanCE fluorescent intercalating dye. Samples were diluted 1:100 with deionized water and introduced into the capillary by electrokinetic injection. QC-RT-PCR/CE-LIF was used to quantify leptin mRNA in liver and adipose tissue from 8-week-old male and female broiler chickens. This study is the first report of quantitative analysis of leptin gene expression using QC-RT-PCR/CE-LIF.

Adipose Tissue↗

PubMed2001

Electrophoretic migration behavior of DNA fragments in polymer solution.

A newly developed polymer coil shrinking theory is described and compared with the existing entangled solution theory to explain electrophoretic migration behaviour of DNA in hydroxypropylmethylcellulose (HPMC) polymer solution in buffer containing 100 mM tris(hydroxymethyl)aminomethane 100 mM boric acid, 2 mM ethylenediaminetetraacetic acid at pH 8.3. The polymer coil shrinking theory gave a better model to explain the results obtained. The polymer coil shrinking concentration, Cs, was found to be 0.305% and the uniform entangled concentration, C+, 0.806%. The existence of three regions (the dilute, semidilute, and concentrated solution) at different polymer concentrations enables a better understanding of the system to guide the selection of the best conditions to separate DNA fragments. For separating large fragments (700/ 800 bp), dilute solutions (HPMC < 0.3%) should be used to achieve a short migration time (10 min). For small fragments (200/300 bp), concentrated solutions are preferred to obtain constant resolution and uniform separation. The best resolution is 0.6% HPMC due to a combined interaction of the polymer coils and the entangled structure. The possibility of DNA separation in semidilute solution is often neglected and the present results indicate that this region has a promising potential for analytical separation of DNA fragments.

Buffers↗

PubMed2002

Application of capillary zone electrophoresis to the screening of some angiotensin II receptor antagonists.

A capillary zone electrophoretic (CZE) method was optimized for the separation of five angiotensin II receptor antagonists (Losartan, Irbesartan, Valsartan, Telmisartan and Eprosartan) and two of their metabolites (EXP 3174 and Candesartan M1) by means of experimental design methodologies. The aim of this study was to define rapidly experimental conditions under which the analytes can be resolved for quantitation. The effects of the buffer (pH, concentration and composition), the organic modifier and voltage were studied. Critical factors were identified in a screening design (fractional factorial design) and sequentially an optimization design (central composite design) was used to choose optimal conditions for separation. The most favorable electrophoretic conditions were found by setting the resolution at a threshold value (Rs < or = 1.5) and minimizing, if possible, analysis time. Successful results were obtained with a 50 mM potassium dihydrogen phosphate:boric acid (25:75 v/v) buffer at pH 5.5 in the presence of 5% methanol and application of a 25 kV voltage. Analysis time was 8 min in a conventional fused-silica capillary (50 cm effective length) in a normal cationic mode (anode at the inlet and cathode at the outlet) after hydrostatical sample injection for 30 s.

Acrylates↗

PubMed2002

Quantification and evaluation of Joule heating in on-chip capillary electrophoresis.

We present the use of a novel, picoliter volume interferometer to measure, for the first time, the extent of Joule heating in chip-scale capillary electrophoresis (CE). The simple optical configuration for the on-chip interferometric backscatter detector (OCIBD) consists of an unfocused laser, an unaltered silica chip with a half-cylinder channel and a photodetector. Using OCIBD for millidegree-level noninvasive thermometry, temperature changes associated with Joule heating (2.81 degrees C above ambient) in on-chip CE have been observed in 90 microm wide and 40 microm deep separation channels. The temporal response of Joule heating in isotropically etched channels was exponential, with it taking an excess of 2.7 s to reach equilibrium. Buffer viscosity changes have also been derived from empirical on-chip thermometry data, allowing for the determination of diffusion coefficients for solutes when separated in heated buffers. In addition, OCIBD has allowed the reduction in separation efficiency to be estimated in the absence of laminar flow and due to increased molecular diffusion and lower buffer viscosity. A 7% reduction in separation efficiency was determined for a high current drawing buffer such as Tris-boric acid under an applied field of just 400 V/cm. Results indicate that heating effects in on-chip CE have been underestimated and there is a need to readdress the theoretical model.

Buffers↗

PubMed2002

DNA separation by microchip electrophoresis using low-viscosity hydroxypropylmethylcellulose-50 solutions enhanced by polyhydroxy compounds.

Low-viscosity polymer solutions have potential for double-stranded (ds) DNA separations in micrototal analysis systems (micro-TAS). In this paper, we report dilute, low-viscosity hydroxypropylmethylcellulose-50 (HPMC-50, 11.5 kDa) solutions containing polyhydroxy additives as separation media. Predominant operational variables, such as applied electric field strength, fluorescent intercalator (YOPro-1) concentration, polymer concentration, and additive concentration, are thoroughly investigated. Fast (within 170 s) and excellent separation of DNA restriction fragments ranging in size from 72 to 1353 base pairs (bp) is achieved in a 30 mm length channel of polymethylmethacrylate (PMMA) microchips at an electric field strength of 300 V/cm, by introducing 8% mannitol, 8% glucose or 10% glycerol additives into a 2% HPMC-50/1 x Tris-borate-EDTA (TBE) solution. The low-viscosity (40 cP) matrix formulation provides both coating of the microchannels and separation of DNA in one step. The performance in the solution surpasses that in highly concentrated HPMC-50 solution. In addition, separation using 1xTris-EDTA buffer in the 2% HPMC-50 matrix containing polyhydroxy additives also exhibits a notably increased performance. This is presumably due to formation of hydrogen-bonding interactions of polyhydroxy additives with HPMC-50 matrix and DNA so as to increase the coupling interactions between matrix and DNA molecules during electrophoresis. The result reflects that boric acid is not a prerequisite in polyhydroxy-enhanced HPMC-50 solution for separation.

Bacteriophage phi X 174↗

PubMed1984

Microdissection by ultrasonication: scanning electron microscopy of the epithelial basal lamina of the alimentary canal in the rat.

The epithelial basal lamina of the various parts of the alimentary canal of the rat was exposed by removal of the overlying epithelium. This was achieved by prolonged fixation in OsO4 or immersion in aqueous boric acid or both, followed by dehydration in acetone and exposure to ultrasonic vibration. The surface of the esophageal basal lamina is undulating with smooth hills and valleys, the smallest of which model the basal surfaces of the germinal cells of the epithelium. The stomach presents a perforated appearance because of ostia formed by evaginations of the basal lamina to enclose glands. In the small intestine, clavate rather than cylindrical villous cores are separated by ostia of intestinal crypts. In the large intestine, ostia are separated by broad areas of basal lamina in the cecum but are close together in the colon. The complex contours of the basal lamina are largely determined by the basal surface of the overlying epithelium but may be affected by structures in the underlying interstitium. Subepithelial lymph nodes, for example, are covered by a conspicuously porous basal lamina. Each nodule may be surrounded by ostia of as many as 20 crypts of Lieberkühn. The basal lamina of the ileocecal valve displays gradual transition from ileum to cecum.

Animals↗