PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Polyesters”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources
PubMedDate not supplied

Polyester coating of cellulose fiber surfaces catalyzed by a cellulose-binding module-Candida antarctica lipase B fusion protein.

A new approach to introduce polymers to cellulosic materials was developed by using the ability of a cellulose-binding module-Candida antarctica lipase B conjugate to catalyze ring-opening polymerization of epsilon-caprolactone in close proximity to cellulose fiber surfaces. The epsilon-caprolactone was introduced to the cellulose surfaces either by simple addition of liquid monomer or through gas phase. The effects of water activity and temperature on the lipase-catalyzed polymerization process were investigated. Analysis showed that the water content in the system primarily regulated the obtained polymer molecular weight, whereas the temperature influenced the reaction rate. The hydrophobicity of the obtained surfaces did not arise from covalent attachment of the poly(epsilon-caprolactone) to the surface hydroxyl groups but rather from surface-deposited polymers which could be readily extracted. The degree of lipase-catalyzed hydrolysis through introduction of water to the polymer-coated cellulose fiber surfaces was also investigated and shown to be significant.

Candida↗
PubMedDate not supplied

Macrolactones and polyesters from ricinoleic acid.

A systematic study on the synthesis, characterization, and polymerization of ricinoleic acid (RA) lactone is reported. Ricinoleic acid lactones were synthesized by refluxing pure ricinoleic acid in chloroform (10 mg/mL) with dicyclohexylcarbodimide and (dimethylamino)pyridine as catalyst. Purification of RA lactones was performed by silica gel chromatography. The reaction resulted in a 75% yield of ricinoleic acid lactones. IR and NMR analysis confirmed the formation of cyclic compounds. Polymerization of the ricinoleic acid lactones with catalysts commonly used for ring-opening polymerization of lactones, under specific reaction conditions, resulted in oligomers. Copolymerization with lactide (LA) by ring-opening polymerization, using Sn(Oct) as catalyst, yielded copolyesters with molecular weights (M(w)) in the range of 5000-16000 and melting temperatures of 100-130 degrees C for copolymers containing 10-50% w/w ricinoleic acid residues. Degradation studies of the copolymers were performed in 0.1 M phosphate buffer solution, pH 7.4, at 37 degrees C. P(LA-RA)s with up to 20% w/w RA slowly degraded and released only approximately 7% of its lactic acid content after 60 days of study, while pure PLA under similar conditions released more than 20% of its lactic acid content. On the other hand, copolyesters containing more then 20% w/w RA degraded and released lactic acid faster than pure PLA due to the low crystallinity of the copolymers.

Lactones↗
PubMedDate not supplied

Elastomeric hydrolyzable porous scaffolds: copolymers of aliphatic polyesters and a polyether-ester.

Porous scaffolds of 1,5-dioxepan-2-one (DXO), L-lactide (LLA), and epsilon-caprolactone (CL) were prepared by a solvent casting, salt particulate leaching technique in which the composites were detached from their mold using a novel methanol swelling procedure. By incorporating DXO segments into polymers containing LLA or CL, an increase in hydrophilicity is achieved, and incorporating soft amorphous domains in the crystalline sections enables tailoring of the mechanical properties. The porosities of the scaffolds ranged from 89.2% to 94.6%, and the pores were shown to be interconnected. The materials were synthesized by bulk copolymerization of 1,5-dioxepan-2-one (DXO), L-lactide (LLA), and epsilon-caprolactone (CL) using stannous 2-ethylhexanoate as catalyst. The copolymers formed varied in structure; poly(DXO-co-CL) is random in its arrangement, whereas poly(DXO-co-LLA) and poly(LLA-co-CL) are more blocky in their structures.

Biocompatible Materials↗
PubMed2006

Influence of PEG endgroup and molecular weight on its reactivity for lipase-catalyzed polyester synthesis.

Polycondensations were performed at 70 degrees C in bulk using physically immobilized lipase B from Candida antarctica (CAL-B) as catalyst. Study of copolymerizations between sebacic acid and PEG diols of differing Mn values (200, 400, 600, 1000, 2000, and 10 000) showed that PEG 400 and 600 were most reactive (DP(avg) up to about 6). Increasing the PEG diol chain length from 600 to 1000, 2000, and 10 000 resulted in large decreases in copolymer DP(avg) values. PEG200 diacids (i.e., HOOC-(CH2)x-O-(CH2CH2O)n-(CH2)x-COOH) were successfully synthesized where x was 1, 4, 5, 7, 9, and 11. Study of copolymerizations of these diacids with 1,8-octanediol showed that, by introduction of a five-carbon methylene spacer (x = 5), remarkable increases in the reactivity of PEG200 diacids were achieved. In addition, introduction of this spacer was also effective for increasing the reactivity of PEG diacids of higher molecular weight (i.e., PEG400, 600, and 1000). This work verified the hypothesis that, by conversion of PEG chain ends to structures more closely resembling fatty acids, modified PEG building blocks are obtained that are better recognized as substrates by CAL-B during condensation reactions.

Candida↗
PubMed2006

Sequence distribution in microbial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) co-polyesters determined by NMR and MS.

The microstructure of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolyesters (PHBV) as well as a mixture of two PHBV copolyesters of different comonomer composition and sequence distribution was studied by 13C NMR based on dyad and triad analysis and multistage electrospray ionization mass spectrometry (ESI-MSn). Both techniques gave results that were in good agreement for all investigated samples. The effect of microstructure on PHBV thermal properties was investigated from the melting behavior of samples. A PHBV copolyester with randomly distributed hydroxyvalerate units (12.0 mol % HV) showed a single melting peak, whereas samples with nonrandom composition distribution showed multiple melting peaks in their thermograms. Such complex melting behavior suggested that the 12.9 and 27.1 mol % PHBV copolyesters were actually blends of several copolymers with widely different comonomer-unit composition.

Calorimetry, Differential Scanning↗
PubMed2006

Environmental degradation of polyester blends containing atactic poly(3-hydroxybutyrate). Biodegradation in soil and ecotoxicological impact.

The degradation of poly[(R,S)-3-hydroxybutyrate], a-PHB, binary blends with natural PHB (n-PHB) and poly(L-lactic acid), PLLA, respectively, has been investigated in soil. In such a natural environment, a-PHB blend component was found to biodegrade. The degradation of a-PHB-containing blends proceeded faster than that of respective plain n-PHB and PLLA. The molecular weight decrease of the n-PHB component was higher, while the same rate of bioerosion of both components was observed for the a-PHB/n-PHB binary blend. For the a-PHB blend with PLLA, the weight loss was accompanied by blend composition changes and the decrease of a-PHB content. However, the PLLA molecular weight decrease was lower in the blend in comparison with the plain PLLA sample. The increase of the number of microorganisms particularly observed for the soil where binary blends were incubated indicates that microbial degradation of a-PHB takes place. The terrestrial plant growth test (cress and barley) demonstrates no environmental toxicity of the materials studied.

Hordeum↗
PubMed2006

Polyester-based carborane-containing dendrons.

New carborane-containing dendrons based on a 2,2-bis(hydroxymethyl)propanoic acid scaffold have been prepared for applications in boron neutron capture therapy. A generation-2 carborane-containing dendron carrying 40 boron atoms was the highest generation synthetically available due to the steric crowding. The structure of this dendron has been simulated by molecular dynamics. A 10-carbon linker carrying a carboxylic group has been installed at the focal point of the dendron to distance the attachment point from the sterically hindered core.

Boron Compounds↗
PubMed2004

Design of catalytic carbonylative polymerizations of heterocycles. Synthesis of polyesters and amphiphilic poly(amide-block-ester)s.

The combination of CH3C(O)Co(CO)3P(o-tolyl)3/m-methoxypyridine serves as a versatile catalyst for both the carbonylative polymerizations of epoxides and N-alkylaziridines under closely resembling mechanistic hypotheses. Diblock poly(beta-alanoid-b-beta-hydroxypropionate)s can be synthesized even when the aziridine and epoxide comonomers are added all together at the beginning of the reaction.

Aziridines↗
PubMed2006

Amorphous linear aliphatic polyesters for the facile preparation of tunable rapidly degrading elastomeric devices and delivery vectors.

A versatile method for preparing amorphous degradable elastomers with tunable properties that can be easily fabricated into a wide variety of shape-specific devices was investigated. Completely amorphous, liquid poly(ester ether) prepolymers with number-average molecular weights between 4 and 6 x 10(3) g/mol were prepared via condensation polymerization. These liquid prepolymers were then thermally cross-linked to form degradable elastomeric structures. The ability to vary the composition of these liquid prepolymers allows for easy control of the mechanical and degradation properties of the resulting elastomeric structures. Materials can be designed to completely degrade in vitro over a range of 30 days to 6 months, while the Young's modulus can be varied over 3 orders of magnitude (G = 0.02-20 MPa). Also, the liquid nature of these prepolymers makes them amenable to a wide variety of fabrication techniques. Using traditional and modified imprint lithography techniques, we have fabricated devices that demonstrate a wide variety of biologically applicable topologies, which could easily be extended to fabricate devices with more complex geometries. Until now, no method has combined this ease and speed of fabrication with the ability to control the mechanical and degradation properties of the resulting elastomers over such a broad range.

Biocompatible Materials↗
PubMed2000

Synthesis and characterization of pyridine-based polyamido-polyester optically active macrocycles and enantiomeric recognition for D- and L-amino acid methyl ester hydrochloride.

Five new chiral macrocycles, 3a-e, have been prepared by the acylation cyclization of chiral diamine dihydrobromide intermediates 2a-c with 2,6-pyridinedicarbonyl dichloride in highly diluted solution at room temperature. The chiral diesters 1a-c needed for the preparation of the macrocycles were obtained from condensation of corresponding N-(Z)-L-amino acids and 2,6-bishydroxymethyl pyridine in the presence of DCC and DMAP. The enantiomeric recognition of chiral macrocycles 3a-e for D- and L-amino acid methyl ester hydrochlorides has been characterized by fluorescence spectra, which indicate that some of them exhibited significant chiral recognition for the enantiomers of D- and L-amino acid methyl ester hydrochlorides. The stoichiometry and binding constants of 3a-L-Am(2) and 3c-L-Am(2) complexes have been determined. An X-ray analysis of the chiral macrocycle 3b show that the chiral ligand is rather rigid and strained.

Acylation↗
PubMed2000

Hyperproduction of polyesters consisting of medium-chain-length hydroxyalkanoate monomers by strain Pseudomonas stutzeri 1317.

Pseudomonas stutzeri strain 1317 was found to grow on various fatty acids, alcohols, diols, as well as glucose and gluconate for the synthesis of polyhydroxyalkanoates (PHA) with various monomer units. The PHA monomer structures were dependent on the type of fatty acids and alcohols, as well as the diols in the culture media. Only even number monomers, such as 3-hydroxyhexanoate (HHx), 3-hydroxyoctanoate (HO) and 3-hydroxydecanoate (HD), were accumulated when even numbered fatty acids, alcohols, glucose and gluconate, as well as diol were used as carbon sources. Odd numbered fatty acids and odd numbered alcohols led to the formation of odd numbered monomers, such as 3-hydroxyvalerate (HV), 3-hydroxyheptanoate (HHp), 3-hydroxynonanoate (HN) and 3-hydroxyundecanoate (HU). The strain tolerated up to 1.5% of ethanol and made 8.3% of PHA when growth was conducted in 1.2% of ethanol. PHA formed up to 77% of cell dry weight when the strain was grown in tridecanoate. PHA synthesis was highly dependent on the nitrogen source. A depletion in nitrogen supply immediately resulted in PHA accumulation in cells grown in the glucose mineral medium.

Alcohols↗
PubMed2000

Degradation of microbial polyester poly(3-hydroxybutyrate) in environmental samples and in culture.

Poly(3-hydroxybutyrate) [P(3HB)] test-pieces prepared from the polymer produced by Azotobacter chroococcum were degraded in natural environments like soil, water, compost and sewage sludge incubated under laboratory conditions. Degradation in terms of % weight loss of the polymer was maximum (45%) in sewage sludge after 200 days of incubation at 30 degrees C. The P(3HB)-degrading bacterial cultures (36) isolated from degraded test-pieces showed different degrees of degradation in polymer overlayer method. The extent of P(3HB) degradation increases up to 12 days of incubation and was maximum at 30 degrees C for majority of the cultures. For most efficient cultures the optimum concentration of P(3HB) for degradation was 0.3% (w/v). Supplementation of soluble carbon sources like glucose, fructose and arabinose reduced the degradation while it was almost unaffected with lactose. Though the cultures degraded P(3HB) significantly, they were comparatively less efficient in utilizing copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate [P(3HB-co-3HV)].

Arabinose↗
PubMed1996

Polyester nanocapsules as new topical ocular delivery systems for cyclosporin A.

PURPOSE: Nanocapsules composed of an oily core (Migliol 840) (MG) surrounded by a poly-epsilon-caprolactone (PECL) coat were evaluated as potential vehicles for the topical ocular administration of cyclosporin A (CyA). METHODS: A 2(3) experimental factorial design was applied to optimize the coating of the oily nanodroplets by a solvent displacement technique and to encapsulate a high dose of CyA. The variables investigated were: volume of oil (MG), amount of polymer (PECL), and volume of the organic solvent (acetone) used to dissolve the polymer. RESULTS: Nanocapsules had a mean size in the range of 210-270 nm, a negative zeta potential (between -55 and -60 mV) and a maximum loading capacity of 50% (CyA/PECL ratio). These highly loaded nanocapsules displayed a thick spongeous polymer coating around the oily nanodroplets. The corneal levels of CyA were up to 5 times higher for the encapsulated CyA than for the oily solution of CyA. In addition, these levels remained significantly higher than those of the control group (oily solution) for up to 3 days. Furthermore, the area-under-the-curve (AUC) values were significantly increased for the encapsulated CyA (319.98) with respect to the oily control (74.34). CONCLUSIONS: The CyA-loaded nanocapsules are shown to be interesting vehicles for the improvement of the ocular penetration of CyA.

Administration, Topical↗
PubMed1996

Anti-inflammatory and antishock water-soluble polyesters of glucocorticoids with low level systemic toxicity.

PURPOSE: The objective of this study was to evaluate the pharmacological activity of glucocorticoid hormones incorporated into the structure of water-soluble carbochain polymers via the esterified 21-CH2OH group. METHODS: Polymer analogs of glucocorticoids were prepared by radical copolymerization of 1-vinyl-2-pyrrolidone with cortisol or dexamethasone 21-crotonates and crotonic acid or 2-(diethylamino) ethylcrontonate which served as ionogenic comonomers. Anti-inflammatory, immunosuppressive and catabolic activities for ionogenic tertiary copolymers and previously prepared non-ionogenic binary copolymers were evaluated in standard animal models. The antishock activity of some of the copolymers was evaluated using the "declamping shock" model. RESULTS: Water-soluble tertiary copolymers with a steroid content up to 14 mol% and an intrinsic viscosity up to 0.30 dl/g in ethanol were synthesized. It was shown that the copolymers were stable in aqueous solutions at pH 5.2-7.3. All of the polymers studied suppressed inflammatory reactions at the level of free hormones when administered interperitoneally. The antishock activity was considerably higher compared to free steroids. The copolymers, unlike unmodified glucocorticoids, did not influence the physical development of young animals. They also caused much lower thymus hypotrophy than free hormones. No clear effect of the presence and nature of ionogenic units in copolymers on the pharmacological performance of the copolymers was detected. CONCLUSIONS: The water-soluble polymers bearing glucocorticoid 21-residues in the side chains retain the anti-inflammatory activity of free steroids and exhibit a higher antishock, a lower immunosuppressive and no catabolic effect.

Animals↗
PubMed1993

Determinants of release rate of tetanus vaccine from polyester microspheres.

Controlled-release formulations based on poly(lactic) (PLA) and poly(lactic/glycolic) acid (PLGA) microspheres containing tetanus vaccine were designed. The polymers forming the microspheres were L-PLA of different molecular weights and DL-PLGA, 50:50. These microspheres were prepared by two solvent elimination procedures, both using a double emulsion, and were characterized for size, morphology, and toxoid release kinetics. The influence of formulation variables such as polymer type, vaccine composition, and vaccine/polymer ratio was also investigated. Both techniques yielded microspheres with similar size, morphology, and release properties. Microsphere size was dependent on the type of polymer and the presence of the surfactant L-alpha-phosphatidylcholine, which led to a reduction in microsphere size. On the other hand, the release kinetics of encapsulated protein were affected by the polymer properties (ratio lactic/glycolic acid and molecular weight) as well as by the vaccine composition, vaccine loading, and microsphere size. Moreover, for some formulations, a decrease in microsphere size occurred simultaneously, with an increase in porosity leading to an augmentation of release rate. The changes in the PLA molecular weight during in vitro release studies indicated that release profiles of tetanus toxoid from these microspheres were only marginally influenced by polymer degradation. A significant fraction of protein (between 15 and 35%) was initially released by diffusion through water-filled channels. In contrast, the decrease in the PLGA molecular weight over the first 10 days of incubation suggested that erosion of the polymer matrix substantially affects protein release from these microspheres. Among all formulations developed, two differing in microsphere size, polymer hydrophobicity, and release profile were selected for in vivo administration to mice.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗
PubMed2003

Novel polyester-polysaccharide nanoparticles.

PURPOSE: The aim of the present study was to develop a new type of core-shell nanoparticles from a family of novel amphiphilic copolymers, based on dextran (DEX) grafted with poly(epsilon-caprolactone) (PCL) side chains (PCL-DEX). METHODS: A family of PCL-DEX copolymers was synthesized in which both the molecular weight and the proportion by weight of DEX in the copolymer were varied. The nanoparticles were prepared by a technique derived from emulsion-solvent evaporation, during which emulsion stability was investigated using a Turbiscan. The nanoparticle size distribution, density, zeta potential, morphology, and suitability for freeze-drying were determined. RESULTS: Because of their strongly amphiphilic properties, the PCL-DEX copolymers were able to stabilize o/w emulsions without the need of additional surfactants. Nanoparticles with a controlled mean diameter ranging from 100 to 250 nm were successfully prepared. A mechanism of formation of these nanoparticles was proposed. Zeta potential measurements confirmed the presence of a DEX coating. CONCLUSION: A new generation of polysaccharide-decorated nanoparticles has been successfully prepared from a family of PCL-DEX amphiphilic copolymers. They may have potential applications in drug encapsulation and targeting.

Chemistry, Pharmaceutical↗