SEARCH · PubMed Health

Results for “Polymers”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources

PubMed1997

Distribution of organosilicon polymers in augmentation mammaplasties at autopsy.

Silicone-containing breast implants have been used since 1963 for cosmetic augmentation and breast reconstruction. Currently, there is intense debate regarding the extent and mechanism of migration of silicone from the area of implant. The current study compares tissue distribution of organosilicon polymers between women with and without silicone breast implants to determine the extent of silicone migration from breast implants. Samples were collected at autopsy from 15 individuals with bilateral breast implants with no known history of chest trauma and from 14 age- and sex-matched controls. Capsule, breast, axillary lymph nodes, abdominal fat, liver, lung, and spleen were collected for analysis of organosilicon polymers by atomic absorption spectrometry and for examination by light microscopy. Blood was collected for analysis of rheumatoid factor and antinuclear antibodies. Silicone was observed microscopically in at least one capsule section from all implant cases and in at least one lymph node in 8 of 15 implant cases. Silicone was not observed in lymph nodes from control cases. Organosilicon polymers were extracted from tissue using heptane, and the silicon content of the extract was quantitated by atomic absorption spectrometry. Silicon was detected in all capsules; statistically significant increases of organosilicon polymers were measured in axillary lymph nodes, breast, and abdominal fat from individuals with silicone breast implants when compared with the nonimplant group. Measurable amounts of organosilicon polymers were found in tissues from the nonimplant group. Suitable blood specimens were analyzed for the presence of rheumatoid factor and antinuclear antibodies. All nine implant cases tested were negative for the presence of antinuclear antibodies. Three implant cases which were tested for rheumatoid factor also were negative. We conclude that organosilicon polymers routinely migrate from the site of breast implantation to regional tissues near the implant site. Tissues from nonimplant cases often contained measurable amounts of organosilicon polymers, and tissue distribution was variable within any single individual: this is consistent with the wide-spread use and form of organosilicon polymers.

Adult↗

PubMed2006

Elevated first trimester maternal levels of soluble fibrin polymer are associated with lower birthweight in twin gestation.

We assessed soluble fibrin polymer longitudinally in normal pregnancy, thrombophilic pregnancy and twin gestation Thirty-three thrombophilic pregnancies, 34 uncomplicated multiple gestations and 23 singleton normal pregnancies were studied. Maternal plasma samples were collected in the first (6-12 weeks), 2nd (13-25 weeks) and 3rd trimesters of pregnancy (26-40 weeks) and were stored at -70 degrees C until assay. Soluble fibrin polymer was assayed by enzyme-linked immunosorbent assay (ABS, Copiague, New York, USA). Statistical analysis were made by Spearman test and Levine's test for equality of variance (P < 0.05). First soluble fibrin polymer maternal levels in twin gestation were significantly higher than in normal pregnancy and thrombophilic pregnancy, (23.8 +/- 4.5 mug/ml versus 9.2 +/- 3.1 and 10.0 +/- 2.0 mug/ml respectively, P < 0.005). Second and third trimester maternal levels of SFP in twins were also significantly higher than in normal pregnancy. First trimester soluble fibrin polymer was highly correlated with birthweight in twin gestation (r = -1, P < 0.01). In the third trimester, maternal soluble fibrin polymer correlated with placental weight in twin gestation (r = 0.639, P < 0.01). Overall, soluble fibrin polymer was correlated with placental weight and birthweight in the three groups but this did not reach statistical significance. Elevated maternal plasma levels of soluble fibrin polymer in twin gestation may derive from an accelerated coagulation process due to extensive vascular remodelling. Current studies are underway to determine the utility of soluble fibrin polymer in assessing fetal growth abnormalities.

Adult↗

PubMed2001

Adsorption properties of a colloid-polymer mixture confined in a slit pore.

The soft fundamental-measure theory, which was based on the additive colloid-polymer mixture [M. Schmidt, Phys. Rev. E 62, 3799 (2000)] has been employed to investigate the adsorption of a colloid-polymer mixture within a hard slit pore. The calculated results show that the adsorption for the confined colloid-polymer mixture is very different from those of the colloid-colloid and polymer-polymer mixtures. The equilibrium particle density distribution strongly depends on the softness of a star polymer. The local relative concentration oscillates with a spatial period close to the diameter of a large particle in the same way as the equilibrium particle density distribution. The size selectivity in adsorption depends both on the softness of a star polymer and on the particle size ratio in a binary mixture. In particular, the strong adsorption occurs at the ultra-soft polymer and high bulk packing fraction.

Journal Article↗

PubMed2002

Flory-Huggins theory for athermal mixtures of hard spheres and larger flexible polymers.

A simple analytic theory for mixtures of hard spheres and larger polymers with excluded volume interactions is developed. The mixture is shown to exhibit extensive immiscibility. For large polymers with strong excluded volume interactions, the density of monomers at the critical point for demixing decreases as one over the square root of the length of the polymer, while the density of spheres tends to a constant. This is very different from the behavior of mixtures of hard spheres and ideal polymers, these mixtures, although even less miscible than those with polymers with excluded volume interactions, have a much higher polymer density at the critical point of demixing. The theory applies to the complete range of mixtures of spheres with flexible polymers, from those with strong excluded volume interactions to ideal polymers.

Journal Article↗

PubMed2005

Polymer stress tensor in turbulent shear flows.

The interaction of polymers with turbulent shear flows is examined. We focus on the structure of the elastic stress tensor, which is proportional to the polymer conformation tensor. We examine this object in turbulent flows of increasing complexity. First is isotropic turbulence, then anisotropic (but homogenous) shear turbulence, and finally wall bounded turbulence. The main result of this paper is that for all these flows the polymer stress tensor attains a universal structure in the limit of large Deborah number De >> 1. We present analytic results for the suppression of the coil-stretch transition at large Deborah numbers. Above the transition the turbulent velocity fluctuations are strongly correlated with the polymer's elongation: there appear high-quality "hydroelastic" waves in which turbulent kinetic energy turns into polymer potential energy and vice versa. These waves determine the trace of the elastic stress tensor but practically do not modify its universal structure. We demonstrate that the influence of the polymers on the balance of energy and momentum can be accurately described by an effective polymer viscosity that is proportional to the cross-stream component of the elastic stress tensor. This component is smaller than the streamwise component by a factor proportional to De2. Finally we tie our results to wall bounded turbulence and clarify some puzzling facts observed in the problem of drag reduction by polymers.

Journal Article↗

PubMed2005

Simulation and theory of fluid demixing and interfacial tension of mixtures of colloids and nonideal polymers.

An extension of the Asakura-Oosawa-Vrij model of hard sphere colloids and nonadsorbing polymers is studied with grand canonical Monte Carlo simulations and density functional theory. Polymer nonideality is taken into account through a repulsive step-function pair potential between polymers. Simulation results validate previous theoretical findings for the shift of the bulk fluid demixing binodal upon increasing strength of polymer-polymer repulsion, indicating suppression of phase separation. For increasing strength of the polymer-polymer repulsion, simulation and theory consistently predict the interfacial tension of the free interface between the colloidal liquid and the colloidal gas phase to decrease significantly for fixed colloid density difference in the coexisting phases, and to increase for fixed polymer reservoir packing fraction.

Journal Article↗

PubMed2006

Surface segregation of conformationally asymmetric polymer blends.

We have generalized the Edwards' method of collective description of dense polymer systems in terms of effective potentials to polymer blends in the presence of a surface. With this method we have studied conformationally asymmetric athermic polymer blends in the presence of a hard wall to the first order in effective potentials. For polymers with the same gyration radius Rg but different statistical segment lengths lA and lB the excess concentration of stiffer polymers at the surface is derived as delta rho A(z=0) approximately (lB-2 - lA-2)ln(R2g/l2c), where lc is a local length below of which the incompressibility of the polymer blend is violated. For polymer blends differing only in degrees of polymerization the shorter polymer enriches the wall.

Journal Article↗

PubMed1990

The Enzymatic Synthesis of Rubber Polymer in Parthenium argentatum Gray.

Washed rubber particles isolated from stem homogenates of Parthenium argentatum Gray by ultracentrifugation and gel filtration on columns of LKB Ultrogel AcA34 contain rubber transferase which catalyzes the polymerization of isopentenyl pyrophosphate into rubber polymer. The polymerization reaction requires Mg(2+) isopentenyl pyrophosphate, and an allylic pyrophosphate. The K(m) values for Mg(2+), isopentenyl pyrophosphate, and dimethylallyl pyrophosphate were 5.2 x 10(-4) molar, 8.3 x 10(-5) molar, and 9.6 x 10(-5) molar, respectively. The molecular characteristics of the rubber polymer synthesized from [(14)C]isopentenyl pyrophosphate were examined by gel permeation chromatography on three linear columns of 1 x 10(6) to 500 Angstroms Ultrastyragel in a Waters 150C Gel Permeation Chromatograph. The peak molecular weight of the radioactive polymer increased from 70,000 in 15 minutes to 750,000 in 3 hours. The weight average molecular weight of the polymer synthesized over a 3 hour period was 1.17 x 10(6) compared to 1.49 x 10(6) for the natural rubber polymer extracted from the rubber particles. Over 90% of the in vitro formation of the rubber polymer was de novo from dimethylallyl pyrophosphate and isopentenyl pyrophosphate. Treatment of the washed rubber particles with 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate solubilized the rubber transferase. The solubilized enzyme(s) catalyzed the polymerization of isopentenyl pyrophosphate into rubber polymer with a peak molecular weight of 1 x 10(5) after 3 hours of incubation with Mg(2+) and dimethylallyl pyrophosphate. The data support the conclusion that the soluble preparation of rubber transferase is capable of catalyzing the formation of a high molecular weight rubber polymer from an allylic pyrophosphate initiator and isopentenyl pyrophosphate monomer.

Journal Article↗

PubMed1999

Correlation of cytokine elaboration with mononuclear cell adhesion to platelet storage bag plastic polymers: a pilot study.

The basis for many febrile nonhemolytic transfusion reactions associated with platelet transfusion therapy is cytokine elaboration and accumulation in the storage bag, which correlate with the leukocyte content and the length of platelet storage. We propose that a possible additional variable in the elaboration and accumulation of cytokines is the differential adhesion of mononuclear cells to the plastic substrate of the platelet storage bag. We hypothesize that mononuclear cell adhesion-induced cytokine release is greater in random-donor platelet bags composed of the polyolefin polymer compared to the single-donor apheresis platelet bags composed of the polyvinyl chloride polymer with the tri-(2-ethylhexyl) trimellitate (TEHTM) plasticizer. For four blood donors, we demonstrate preferential mononuclear cell adhesion, in vitro, to discs of polyolefin polymer versus discs of polyvinyl chloride polymer with the TEHTM plasticizer. Scanning electron microscopy corroborates this. In addition, proinflammatory cytokine (interleukin 1beta [IL-1beta] and tumor necrosis factor alpha [TNF-alpha]) levels are greater in culture wells containing discs of polyolefin polymer than in those containing discs of polyvinyl chloride polymer with the TEHTM plasticizer, and even more so in storage bags containing polyolefin polymer versus polyvinyl chloride polymer with the TEHTM plasticizer (IL-1beta, TNF-alpha, IL-6, and IL-8). This study suggests, for the first time, that differential plastic substrate mononuclear cell adhesion may contribute to cytokine release during platelet storage. This may represent an additional variable in the pathophysiology of febrile nonhemolytic transfusion reactions in patients receiving stored platelet units.

Blood Platelets↗

PubMed1977

Purification and properties of a soluble polymer of glucose from cultures of Acetobacter xylinum.

A soluble nondialyzable polymer of glucose was isolated and purified by selective ethanol and ammonium sulfate precipitation from the supernatant of a culture of Acetobacter xylinum which was actively producing cellulose. This polymer was heterogeneous in size with an average sedimentation constant S20,w, of the most abundant fraction of 11.1. On drying from dilute solution in water, the polymer(s) showed extended linear fibrils or aggregates of such fibrils by transmission electron microscopy. The infrared spectrum resembled closely that of cellulose II. Preparations of the lyophilized polymer were amorphous by X-ray diffraction. Composition and structure of the polymer were established by enzymatic digestion, acid hydrolysis before paper chromatography, and methylation followed by gas-liquid chromatography. Glucose was the only component of the polymer. There were few, if any, alpha 1 leads to 4 linkages between glucose residues. The polymer(s) is a linear chain of glucose units linked beta 1 leads to 4 with single glucose residues as branches at position 2 of every third glucose on the average. The possibility that this branched glucose polymer is an intermediate in cellulose biosynthesis is examined.

Chemical Phenomena↗

PubMed2004

Molecular-dynamics simulations with explicit hydrodynamics I: on the friction coefficients of deformed polymers.

We implement large-scale Molecular-Dynamics (MD) simulations which incorporate hydrodynamic interactions via the inclusion of explicit Lennard-Jones solvent to examine the behaviour of polymer chains in sieving media. We begin by examining the friction coefficients of polymers in long-lived states responsible for inducing length-dependent mobility, i.e., allowing separation of polymers (or polyelectrolytes) by molecular weight. In particular, the conformations we examine occur in devices which utilize arrays of molecular obstacles or dilute solutions of polymers. We compare the results from our MD simulations with expressions from macroscopic hydrodynamics for four specific cases: i) a random coil excluded-volume Zimm polymer, ii) a rigid polymer moving perpendicular to its major axis iii) a rigid polymer moving parallel to its major axis and iv) a rigid polymer, folded at different points along its contour. We also examine the behaviour of the friction coefficient of a fully flexible molecule pulled by its middle monomer as a function of an applied force F and show that there are several distinct frictional regimes.

Journal Article↗

PubMed2001

Studies of polymer surfaces by sum frequency generation vibrational spectroscopy.

Recently, sum frequency generation (SFG) vibrational spectroscopy has been developed into a powerful technique to study surfaces of polymer materials. This review summarizes the significant achievements in understanding surface molecular chemical structures of polymer materials obtained by SFG. It reviews in situ detection at the molecular level of surface structures of some common polymers in air, surface segregation of small end groups, polymer surface restructuring in water, and step-wise changed polymer blend surfaces. Studies of surface glass transition and surface structures modified by rubbing, plasma deposition, UV light irradiation, oxygen ion and radical irradiation, and wet etching are also discussed. SFG probing of polymer surfaces provides valuable insights into the relations between polymer surface structures and surface properties, which will assist in the design of polymer materials with desired surface properties.

Journal Article↗

PubMed1987

Postprandial glucose and insulin responses to glucose polymers by premature infants.

Previous studies have questioned whether neonatal infants can digest and absorb glucose polymers (GP). Thirteen infants of 33-42 weeks of corrected gestational age were fed two glucose polymers with different dextrose equivalents (DE) and glucose. Postprandial glucose and insulin responses were measured consecutively after each feeding. At 60 min, glucose, glucose polymer DE 15 and glucose polymer DE 24 produced serum glucose responses of 138.1, 111.6 and 120 mg/100 ml, respectively. Differences in mean serum glucose and insulin levels were found when glucose or glucose polymers were used as the test carbohydrate. Glucose polymer DE 24 produced a hormonal response closer to that of glucose. This suggests that glucose polymers were hydrolyzed and absorbed and evoked a sufficient glucose and insulin response. Therefore, these glucose polymers would seem to be suitable for use in feeding neonatal infants.

Blood Glucose↗

PubMed1989

Increased immunoreactivity of plasma after fibrinolytic activation in an anti-DD ELISA system. Role of soluble crosslinked fibrin polymers.

After addition of a low concentration of thrombin to normal plasma, a progressive and significant increase in crosslinked fibrin polymers was found by sodium dodecyl sulfate agarose gel electrophoresis, reaching 27% of total fibrinogen and fibrin before gel formation. As measured by enzyme-linked immunosorbent assay with a monoclonal antibody specific for an epitope near the gamma gamma crosslink site, increased immunoreactivity of plasma did not occur after adding thrombin despite formation of crosslinked fibrin polymers, which indicates that the antibody does not recognize the epitope in the polymers. Addition of tissue-type plasminogen activator (t-PA) to plasma resulted in a more rapid degradation of fibrin polymers than of fibrinogen, indicating that the fibrin specificity of t-PA is retained with soluble fibrin. Coincident with degradation of plasma crosslinked fibrin polymers, plasma DD immunoreactivity increased 70-fold from 50.3 +/- 4.5 (mean +/- SD) to 3,560 +/- 1,235 ng/ml. The presence of increased crosslinked fibrin polymers produced by adding thrombin to plasma significantly increased maximum immunoreactivity after t-PA-induced degradation to 18,500 +/- 11,780 ng/ml. The increase in DD immunoreactivity was dependent on t-PA concentration; no elevation occurred below 0.01 micrograms/ml, and maximal increases occurred above 100 micrograms/ml. Analysis of gel electrophoretic patterns of thrombin and t-PA-treated plasma samples suggests that the DD reactivity of t-PA-treated plasma is mainly due to degradation of soluble crosslinked fibrin polymers. Our findings indicate that plasmic degradation of soluble fibrin polymers in plasma may be an important source of fragment DD during thrombolytic therapy.

Antibodies, Monoclonal↗

PubMed2002

Prevention of experimental cerebral vasospasm by intracranial delivery of a nitric oxide donor from a controlled-release polymer: toxicity and efficacy studies in rabbits and rats.

BACKGROUND AND PURPOSE: A reduction in the local availability of nitric oxide (NO) may play a role in the etiology of chronic cerebral vasospasm after subarachnoid hemorrhage (SAH). We investigated the toxicity and efficacy of a locally delivered NO donor from a controlled-release polymer in preventing experimental cerebral vasospasm in rats and rabbits, respectively. METHODS: Diethylenetriamine/NO (DETA/NO) was incorporated into controlled release ethylene-vinyl acetate (EVAc) polymers. Twenty-eight rats were used in a dose-escalation toxicity study to establish a maximally tolerated dose of DETA/NO-EVAc polymer. In the efficacy experiment, 20 rabbits were assigned to 4 experimental groups (n=5 per group): sham operation; SAH only; SAH+empty EVAc polymer; and SAH+DETA/NO-EVAc polymer. Treatment was initiated 30 minutes after blood deposition. Basilar artery lumen patency was assessed 72 hours after hemorrhage to evaluate the efficacy of DETA/NO in preventing cerebral vasospasm. RESULTS: In the toxicity study, a dose of 3.4 mg/kg was identified as the LD(20) (dose with 20% mortality during the study period) of this DETA/NO formulation. Brain histology revealed hemorrhage and ischemic changes at the implantation site associated with high concentrations of DETA/NO. In the efficacy study, treatment with DETA/NO-EVAc polymer resulted in a significant decrease in basilar artery vasospasm compared with no treatment (93.0+/-4.9% versus 71.4+/-11.9%; P=0.035) or compared with treatment with blank EVAc polymer (93.0+/-4.9% versus 73.2+/-6.4%; P=0.003). CONCLUSIONS: Local delivery of DETA/NO prevents vasospasm in the rabbit basilar artery. Local delivery of DETA/NO via polymers is a safe and effective strategy for preventing cerebral vasospasm after SAH in this model.

Animals↗

PubMed2001

Water-soluble treatments to enhance glucose permeability of protein-resistant polymer overlayers.

This study employed two water-soluble and nontoxic molecules, sucrose and glycerol, to enhance the permeability of PEG-PHEMA polymer gels coated onto 100 kDa molecular weight cutoff polyethersulfone (PES) microdialysis probes. Sucrose precoating of the probes prior to prepolymer coating prevented penetration of the prepolymer into the microdialysis membrane. Glycerol mixed with the prepolymer introduced porosity in the polymer coating upon curing. The sucrose and glycerol were completely removed by soaking in PBS after curing of the polymer coat on the probe tip. Polymer coated probe glucose permeability was tested by measuring glucose recovery from PBS solutions. Biocompatibility was assessed by measuring glucose recovery of polymer coated probes from heparanized whole porcine blood. Results show that the sucrose and glycerol treatments yielded polymer coated probes with glucose permeability nearly equal to bare probes when tested in PBS solution, but that this increased permeability was not observed when tested in whole blood. This suggests that the thickness of the polymer films (10-100 microm), while not a limiting factor in PBS solution, may have presented a diffusion barrier to glucose recovered from blood. Surprisingly, however, the polymer coated probes exhibited less thrombus formation that did the bare probes after blood exposure.

Animals↗

PubMed1986

Polymer sliding in axons.

In axons the cytoskeletal polymers are transported by slow axonal transport. Microtubules, microfilaments and neurofilaments move at different rates in the axon. On the basis of their transport rates, two populations of polymers can be distinguished: SCb polymers are transported at 2-4 mm day-1 and SCa polymers are transported at 0.25-1 mm day-1. As they move within the axon, the faster moving SCb polymers must pass the slower moving SCa polymers. This observation and others indicate that polymers slide in the axon. A model of polymer sliding is presented. This model provides a dynamic architectural framework for studies of the mechanisms of slow axonal transport.

Animals↗

PubMed2001

Passive targeting of doxorubicin with polymer coated liposomes in tumor bearing rats.

The purpose of this study was to reveal the effectiveness of the polymer coated liposomes as a carrier of the anticancer drug doxorubicin in intravenous administration. The size controlled doxorubicin-loaded liposomes (egg phosphatidylcholine : cholesterol = 1:1 in molar ratio) were coated with hydrophilic polymers (polyvinyl alcohol; PVA and hydroxypropylmethylcellulose; HPMC) having a hydrophobic moiety in the molecules (PVA-R, HPMC-R). The existence of a thick polymer layer on the surface of the polymer coated liposomes was confirmed by measuring the change in particle size and the amount of polymer on the liposomal surface. The polymer coating effects on the tumor accumulation of the drug encapsulated in the liposomes were evaluated in Walker rat carcinoma 256 cell bearing rats. The doxorubicin-loaded liposomes coated with PVA-R and HPMC-R showed higher drug accumulation into the tumor site by prolonging the systemic circulation in tumor-bearing rats. The targeting efficiency of the polymer coated liposomes calculated with the total and tumorous clearance of the drug was ca. 5 times larger than that of non-coated liposomes. We ascertained that polymers having a hydrophobic moiety in the molecule such as PVA-R and HPMC-R are suitable materials for modifying the surfaces of the doxorubicin-loaded liposome to improve its targeting properties.

Animals↗