PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Biodegradable Delivery Systems”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources
PubMed2006

Investigation of the proinflammatory potential of biodegradable nanoparticle drug delivery systems in the lung.

Particulate nanocarriers have been praised for their advantageous drug delivery properties in the lung, such as avoidance of macrophage clearance mechanisms and long residence times. However, instilled non-biodegradable polystyrene nanospheres with small diameters and thus large surface areas have been shown to induce pulmonary inflammation. This study examines the potential of biodegradable polymeric nanoparticles composed of poly(lactic-co-glycolic acid) (PLGA) and the novel PLGA derivative, diethylaminopropylamine polyvinyl alcohol-grafted-poly(lactic-co-glycolic acid) (DEAPA-PVAL-g-PLGA), to provoke inflammatory responses in the murine lung after intratracheal instillation. Lactate dehydrogenase (LDH) release, protein concentration, MIP-2 mRNA induction, and polymorphonucleocyte (PMN) recruitment in the bronchial alveolar lavage fluid (BALF) were used to evaluate an inflammatory response in Balb-C mice. Two sizes of polystyrene (PS) nanospheres (diameters: 75 nm and 220 nm) were included in the study for comparison. All nanoparticle suspensions were instilled at concentrations of 1 microg/microl and 2.5 microg/microl, representative of an estimated "therapeutic dose" and a concentrated "dose" of particles. In all experiments, the 75 nm PS particles exhibited elevated responses for the inflammatory markers investigated. In contrast, biodegradable particles of comparable hydrodynamic diameter showed a significantly lower inflammatory response. The most marked differences were observed in the extent of PMN recruitment. While the 75 nm and 220 nm PS nanospheres exhibited 41 and 74% PMN within the total BALF cell population after 24 h, respectively, PMN recruiting in lungs instilled with both types of biodegradable particles did not exceed values of the negative isotonic glucose control. In conclusion, evidence suggests that biodegradable polymeric nanoparticles designed for pulmonary drug delivery may not induce the same inflammatory response as non-biodegradable polystyrene particles of comparable size.

Animals↗
PubMed2004

In situ forming parenteral drug delivery systems: an overview.

Biodegradable injectable in situ forming drug delivery systems represent an attractive alternative to microspheres and implants as parenteral depot systems. Their importance will grow as numerous proteins will lose their patent protection in the near future. These devices may offer attractive opportunities for protein delivery and could possibly extend the patent life of protein drugs. The controlled release of bioactive macromolecules via (semi-) solid in situ forming systems has a number of advantages, such as ease of administration, less complicated fabrication, and less stressful manufacturing conditions for sensitive drug molecules. For these reasons, a number of polymeric drug delivery systems with the ability to form a drug reservoir at the injection site are under investigation. Here, we review various strategies used for the preparation of in situ forming parenteral drug depots and their potential benefits/draw-backs, especially with regard to the delivery of protein drug candidates.

Animals↗
PubMed2006

Conjugates of poly(DL-lactic acid) with ethylenediamino or diethylenetriamino bridged bis(beta-cyclodextrin)s and their nanoparticles as protein delivery systems.

Some biodegradable amphiphilic copolymers were synthesized by conjugating poly(DL-lactic acid) (PLA) onto ethylenediamino or diethylenetriamino bridged bis(beta-cyclodextrin)s (bis-CDs). Double emulsion (DE) and nanoprecipitation (NP) methods were used to fabricate the nanoparticles of these copolymers entrapping bovine serum albumin (BSA) as a model protein. Effects of the experimental parameters, such as copolymer composition, BSA concentration, copolymer concentration and poly(vinyl alcohol) concentration, on particular size and encapsulation efficiency (EE) were investigated. Their EE to BSA could reach 83.5% at an optimized condition owing to the cooperative binding effect of the CD moiety with BSA. The core-corona structure of copolymer micelles fabricated from the nanoprecipitation was studied on the basis of 1H NMR and other measurements at various temperatures. The results showed that the core-corona structure kept stable below 50 degrees C (lower than Tg). And increase of the micelle association number occurred above the Tg because the size of the NPs became larger and proton signals of the liquid-like PLA cores could be observed in 1H NMR in D2O at 60 degrees C. The release profiles of NPs showed a burst effect followed by a continuous release. Sodium dodecyl sulfate polyacrylamide gel electrophoresis, circular dichroic and fluorescence spectra were further used to identify the stability of BSA released from the NPs. The nanoparticles from the conjugates have a promising potential in nasal delivery system.

Animals↗
PubMed1998

The pharmacokinetic profile of a biodegradable controlled-release delivery system containing doxycycline compared to systemically delivered doxycycline in gingival crevicular fluid, saliva, and serum.

The primary goal of this study was to characterize the release profile of doxycycline hyclate (8.5% w/w) from a biodegradable controlled-release delivery system (DH) placed in periodontal pockets. Pharmacokinetic data were obtained from gingival crevicular fluid (GCF), saliva, and serum of adult periodontitis patients. These results were compared to those obtained from individuals who received standard oral doses of doxycycline hyclate (200 mg on day 0, then 100 mg/day for 7 days). All participants presented with multiple pockets > or = 5 mm that bled upon probing. At the baseline visit patients receiving local drug delivery had all pockets > or = 5 mm that bled upon probing on one side of the mouth filled with DH. Drug retention was enhanced with 1 of 2 periodontal dressings (non-eugenol [NE] or 2-octyl cyanoacrylate [2-octyl]). Doxycycline concentrations were analyzed with the aid of reverse phase high performance liquid chromatography. GCF saliva, and serum samples were obtained just prior to drug delivery and then at hours 2, 4, 6, 8, 18, 24 and days 2, 3, 5, 7, and 8. GCF and saliva samples were also obtained at days 10, 14, 21, and 28. Thirty two subjects participated in the study; 13 in the NE group, 13 in the 2-octyl group, and 6 in the group taking oral doxycycline. The release of doxycycline in the GCF peaked at 2 hours (1473 microg/ml in the NE group, and 1986 microg/ml in the 2-octyl group). The mean concentration at day 7 was 309 microg/ml for the NE group and 148 microg/ml for the 2-octyl group. Minimal levels of drug were detected in the GCF of the oral doxycycline group with a peak concentration of 2.53 microg/ml at 12 hours. Salivary concentrations for both local delivery groups peaked at hour 2 (4.05 microg/ml for the NE group and 8.78 microg/ml for the 2-octyl group); by the end of day 1 levels were < or = 2 microg/ml. For subjects who took the oral doxycycline, salivary concentrations never exceeded 0.11 microg/ml. Serum concentrations of doxycycline for individuals receiving the local drug delivery never exceeded 0.1 microg/ml. For the oral doxycycline group serum concentrations ranged from 0.91 to 2.26 microg/ml over the 8 days data were collected. The high concentration of drug available at the treated sites coupled with the relatively low levels in the saliva and almost non-existent levels in the serum indicate that this biodegradable controlled-release delivery system displays an appropriate pharmacokinetic profile for the delivery of doxycycline into periodontal pockets.

Administration, Oral↗
PubMed2005

Development and characterization of biodegradable nanospheres as delivery systems of anti-ischemic adenosine derivatives.

We report a preliminary study concerning the encapsulation modalities in nanoparticles of the anti-ischemic drug N6-cyclopentyladenosine (CPA) and its pro-drug 5'-octanoyl-CPA (Oct-CPA). The release of these compounds and the related pro-drug stability effects in human whole blood have been tested. Moreover, the influence of the delivery systems on CPA interaction toward human adenosine A1 receptor has been analysed. The nanospheres were prepared by nanoprecipitation or double emulsion solvent evaporation method using poly(lactic acid) and recovered by gel filtration or ultracentrifugation or dialysis. Free and encapsulated Oct-CPA was incubated in fresh blood and its stability was analysed with HPLC. Quite spherical nanoparticles with mean diameters ranging between 210+/-50 and 390+/-90 nm were obtained. No encapsulation occurred when CPA was used. Satisfactory results concerning drug content (0.1-1.1% w/w) and encapsulation efficiency (6-56%) were achieved when Oct-CPA was employed. The controlled release of the pro-drug was achieved, being released within a range of 1-4 h, or very slowly, depending on nanoparticle preparations. The hydrolysis rate of Oct-CPA in human whole blood appeared stabilized in human whole blood with modalities related to the release patterns. The presence of all nanoparticle preparations did not interfere with CPA interaction at its action site.

Absorbable Implants↗
PubMed2004

Biodistribution and targeting potential of poly(ethylene glycol)-modified gelatin nanoparticles in subcutaneous murine tumor model.

PURPOSE: In order to develop a safe and effective systemically-administered biodegradable nanoparticle delivery system for solid tumors, the comparative biodistribution profiles of gelatin and poly(ethylene-glycol)(PEG)-modified (PEGylated) gelatin nanoparticles was examined in subcutaneous Lewis lung carcinoma (LLC)-bearing female C57BL/6J mice. METHODS: Type-B gelatin and PEGylated gelatin nanoparticles were radiolabeled ((125)I) for the in vivo biodistribution studies after intravenous (i.v.) administration through the tail vein in LLC-bearing mice. At various time intervals, the mice were sacrificed and blood, tumor, and major organs harvested for analysis of radioactivity corresponding to the localization of the nanoparticles. Percent recovered dose was determined and normalized to the weight of the fluid or tissue sample. Non-compartmental pharmacokinetic analysis was performed to determine the long-circulating property and preferential tumor targeting potential of PEGylated gelatin nanoparticles in vivo. RESULTS: From the radioactivity in plasma and various organs collected, it was evident that the majority of PEGylated nanoparticles were present either in the blood pool or taken up by the tumor mass and liver. For instance, after 3 h, the concentrations of PEGylated gelatin nanoparticles was almost 2-fold higher in the blood pool than the control gelatin nanoparticles. PEGylated gelatin nanoparticles remained in the blood pool for a longer period of time due to the steric repulsion effect of the PEG chains as compared to the gelatin nanoparticles. In addition, approximately 4-5% of the recovered dose of PEGylated gelatin nanoparticles was present in the tumor mass for up to 12 h. The plasma and the tumor half-lives, the mean residence time, and the area-under-the-curve of the PEGylated gelatin nanoparticles were significantly higher than those for the gelatin nanoparticles. CONCLUSIONS: The results of this study show that PEGylated gelatin nanoparticles do possess long circulating properties and can preferentially distribute in the tumor mass after systemic delivery.

Animals↗
PubMed2006

Prevention of experimental proliferative vitreoretinopathy with a biodegradable intravitreal drug delivery system of all-trans retinoic acid.

PURPOSE: To evaluate the antiproliferative effect of an all-trans retinoic acid (at-RA) drug delivery system (DDS) on experimental proliferative vitreoretinopathy (PVR). METHODS: PVR was induced in rabbits with core vitrectomy and fibroblast injection. The DDS containing 420 microg, 650 microg, and 1,070 microg of at-RA was implanted into the vitreous of treated groups B, C, and D, respectively. Group A with no DDS and group E with nonmedicated DDS served as controls. The intravitreal at-RA concentration was measured with high-pressure liquid chromatography. The drug toxicity was evaluated histologically. RESULTS: The severity of PVR was significantly reduced in groups C and D but not in groups A, B, and E. The drug release peaked at 6 weeks to 7 weeks. No signs of retinal toxicity were found in the DDS groups. CONCLUSION: Intravitreal implantation of at-RA DDS appears effective in inhibiting the development of PVR and is well tolerated in rabbit eyes.

Absorbable Implants↗
PubMed2005

Intravitreal implantation of the biodegradable cyclosporin A drug delivery system for experimental chronic uveitis.

PURPOSE: The purpose was to evaluate the efficacy of the intravitreal implantation of the biodegradable cyclosporin A (CsA) drug delivery system (DDS) for experimental chronic uveitis. METHODS: The DDS was prepared by formulating CsA into glycolide-co-lactide-co-caprolactone copolymer (PGLC). Right eyes of 30 New Zealand white rabbits were used to establish a model of uveitis and randomized into control, intravitreal non-medicated DDS, oral CsA (15 mg/kg daily), and intravitreal CsA-PGLC DDS (each containing 2 mg CsA) groups. The progress of ocular inflammation, results of electroretinography, and histopathological examination of ocular, renal, and hepatic functions were recorded. Intravitreal CsA levels were measured in another 13 rabbits receiving an implant of the CsA-PGLC DDS. RESULTS: Chronic uveitis was successfully induced in all 30 eyes. The inflammation in the eyes with no treatment, non-medicated implant, and oral CsA was more severe than those with the CsA-PGLC DDS at each timepoint. The electroretinography b-wave was depressed much less in the CsA-PGLC DDS group than in the other three groups (p<0.05). No renal or hepatic tissue damage was found in eyes with the CsA-PGLC DDS. The mean intravitreal CsA level was 102.2~145.5 ng/ml at 1~3 weeks after CsA-PGLC DDS implantation, 491.0~575.2 ng/ml at 4~10 weeks, and 257.3 ng/ml at 14 weeks; no toxicity was detected. CONCLUSION: Intravitreal implantation of the biodegradable CsA-PGLC DDS may effectively reduce the intraocular inflammation in rabbits with no toxicity, which provides a potentially safe and convenient approach for the treatment of chronic uveitis.

Absorbable Implants↗
PubMed1991

Microspheres of biodegradable polymers as a drug-delivery system in the vitreous.

Microspheres of biodegradable polymers were evaluated as a potential controlled-release drug-delivery system in the vitreous. The microspheres were prepared with polymers of poly(lactic acid) or copolymers of glycolic acid and lactic acid. The release of 5-fluorouracil (5-FU) from the microspheres was studied in vitro. Poly(lactic acid) microspheres released 70-85% of total 5-FU over 7 days. Microspheres of polymers with a smaller molecular weight released the drug more rapidly. Copolymer microspheres released 98% of 5-FU over 2 days. The rate of drug release was controllable by changing the molecular weight of the polymers or using a matrix of copolymer. The intravitreal kinetics of the microspheres were studied in ten rabbits in vivo. A suspension of microspheres was injected into the vitreous cavity of five normal eyes and five vitrectomized eyes. By 48 +/- 5.2 days after injection, the microspheres disappeared from the vitreous cavity in the five normal eyes. Clearance from the vitreous cavity was accelerated in the five rabbits that underwent vitrectomy (14 +/- 2.4 days; P less than 0.001). No difference was found in the b waves of electroretinograms before and after injection of the microspheres. The histologic study showed no abnormal findings as a result of the injection. These results suggested that microspheres of biodegradable polymers may be a potential delivery system for the controlled release of drugs in the vitreous.

Animals↗
PubMed1997

Multi-center comparative evaluation of subgingivally delivered sanguinarine and doxycycline in the treatment of periodontitis. II. Clinical results.

The clinical safety and effectiveness of a subgingivally delivered biodegradable drug delivery system containing either 10% doxycycline hyclate (DH), 5% sanguinarium chloride (SC) or no agent (VC) was evaluated in a 9-month multi-center trial. The study was a randomized parallel design with 180 patients who demonstrated moderate to severe periodontitis. All patients had at least two quadrants with a minimum of four qualifying pockets > or = 5 mm that bled on probing. Two of the qualifying pockets were required to be > or = 7 mm. At baseline and at 4 months all qualified sites were treated with the test article administered via syringe. Probing depth reduction (PDR), attachment level gain (ALG), bleeding on probing reduction (BOP), and plaque index were determined monthly. Analysis of efficacy data from the 173 efficacy-evaluable patients indicated that all treatments gave significant positive clinical changes from baseline at all subsequent timepoints. DH was superior to SC and VC in PDR at all timepoints (P < or = 0.01 to 0.001) with a maximum reduction of 2.0 mm at 5 months. For ALG, DH was superior to VC at months 2, 3, 4, 5, 6, 8, and 9 (P < or = 0.04 to 0.002) and superior to SC at months 5, 6, 7, 8, and 9 (P < or = 0.01 to 0.001) with a maximum ALG of 1.2 mm at 6 months. For BOP reduction, DH was superior to VC at all time points (P < or = 0.05) and to SC at months 3, 5, 6, 8, and 9 (P < or = 0.03). For DH, the maximum ALG in deep (> or = 7 mm) pockets was 1.7 mm and PDR 2.9 mm compared to 0.8 mm and 1.6 mm, respectively for moderate (5 to 6 mm) pockets. Test articles were applied without anesthesia and no serious adverse events occurred in the trial. The results of this study indicate that 10% doxycycline hyclate delivered in a biodegradable delivery system is an effective means of reducing the clinical signs of adult periodontitis and exhibits a benign safety profile.

Administration, Topical↗
PubMed1990

Sequential polydepsipeptides as biodegradable carriers for drug delivery systems.

Sequential polydepsipeptides containing both peptide and ester bonds, poly[(L-alanyl)n-gamma-ethyl L-glutamyl-L-lactyl] (n = 0, 1, 2, and 3) (poly[(Ala)n-Glu(OEt)-Lac]), were prepared for application as biodegradable carriers for drug delivery systems. The in vivo degradation of these polymers was evaluated by subcutaneous implantation in the backs of male rats, and was strongly influenced by the number (n) of Ala units in poly[(Ala)n-Glu(OEt)-Lac]. The resulting poly(Ala-Ala-Glu(OEt)-Lac) gave the highest degradability, in which 100% degradation was observed 24 weeks from the start of implantation. A luteinizing-hormone-releasing hormone agonist des-Gly10-[D-Leu6]-LH-RH ethylamide (LH-RH agonist), was incorporated into a sequential poly(Ala-Ala-Glu(OEt)-Lac) carrier by the melt-pressing technique, which gave fine cylindrical polymer formulations with different structures of drug dispersion, e.g., blend-type and sandwich-type formulations. The rate of in vivo release of LH-RH agonist from a blend-type formulation showed a linear decrease with time until its release was finished after 6 weeks' implantation. In contrast, in a sandwich-type formulation, the in vivo release rate was apparently maintained constant over a period of 16 weeks (24 +/- 14 micrograms/day).

Amino Acid Sequence↗
PubMed2003

Effect of surfactant on fabrication and characterization of paclitaxel-loaded polybutylcyanoacrylate nanoparticulate delivery systems.

The feasibility of applying biodegradable polybutylcyanoacrylate (PBCA) nanoparticulate delivery systems (NDSs) for the controlled release of paclitaxel was investigated. Paclitaxel-loaded and unloaded PBCA-NDSs containing various surfactants (dextran 70, cholesterol, polyvinyl alcohol and lecithin) were prepared by anionic polymerization. The effects of surfactant (1% w/v), surfactant combination (1% w/v each), and surfactant concentration (0.05, 1.0 and 2.5% w/v) on PBCA-NDSs were evaluated and characterized by particle size, zeta potential, entrapment efficiency, and in-vitro paclitaxel release kinetics. The physicochemical characteristics of PBCA-NDSs incorporated with various surfactants were significantly improved compared with PBCA-NDS without any surfactant, by decreasing particle size at least 3-fold as well as by increasing the zeta potential up to 18-fold to minimize the agglomeration of nanoparticles. Moreover, PBCA-NDSs incorporated with various surfactants demonstrated higher entrapment efficiency of paclitaxel. Results from the in-vitro release kinetic studies indicated that a more controlled biphasic zero-order release pattern of paclitaxel was observed for PBCA-NDSs incorporated with various surfactants. Compared with dextran 70 and polyvinyl alcohol, the naturally occurring lipids, lecithin and cholesterol, indicated greater advantages in improving the physicochemical properties of PBCA-NDSs, in terms of smaller particle size, higher zeta potential and better drug entrapment efficiency, and better controlled release of paclitaxel, in terms of lower release rate and prolonged action from PBCA-NDSs.

Antineoplastic Agents, Phytogenic↗
PubMed1990

In vivo characteristics of low molecular weight copolymers composed of L-lactic acid and various DL-hydroxy acids as biodegradable carriers for drug delivery systems.

Low molecular weight and amorphous copolyesters composed of 70 mol% L-lactic acid and 30 mol% DL-hydroxy acids such as DL-lactic acid, DL-alpha-hydroxy-n-butyric acid, DL-alpha-hydroxyisovaleric acid and DL-alpha-hydroxyisocaproic acid were synthesized by direct copolycondensation in the absence of catalysts, to evaluate their in vivo capabilities as biodegradable carriers for drug delivery systems. For this purpose, the copolyester was moulded into a small cylindrical specimen under melt-pressing technique and implanted subcutaneously in the back of male adult rats. The in vivo degradation pattern can be subdivided into three types: the formations of parabolic type (L-LA/DL-HBA copolymer), linear type (L-LA/DL-LA copolymer) and S type (L-LA/DL-HIVA and L-LA/DL-HICA copolymers). A luteinizing hormone-releasing hormone agonist, des-Gly10-(D-Leu6)-LH-RH ethylamide monoacetate (LH-RH agonist), was incorporated into the small cylinders of copolyester formulations, of which the strongest pharmacological influence was observed in a copoly(L-LA/DL-HICA) formulation system, resulting in the maintenance of effective pharmacological influence throughout an experimental period of 15 wk, at which the in vivo release rate of LH-RH agonist was held constant at approximately 45 micrograms/d.

Animals↗
PubMed2005

Synthetic biodegradable polymers as drug delivery systems for bone morphogenetic proteins.

Bone morphogenetic proteins (BMP) induce bone formation in vivo, and clinical application in repair of bone fractures and defects is expected. However, appropriate systems to deliver BMP for clinical use need to be developed. We synthesized a new synthetic biodegradable polymer, poly-D,L-lactic acid-para-dioxanone-polyethylene glycol block copolymer (PLA-DX-PEG), to serve as a biocompatible, biodegradable polymer for recombinant human (rh) BMP-2 delivery systems. In animal experiments, new bone was efficiently formed and a large bone defect was repaired using PLA-DX-PEG/rhBMP-2 composites. In addition, this new polymer could be used as an injectable delivery system for rhBMP-2. The rhBMP-2/PLA-DX-PEG composites also could be combined with other materials such as hydroxyapatite or titanium. This new synthetic polymer might be used for rhBMP-2 delivery in various clinical situations involving repair of bone, leading to great changes in orthopedic treatment.

Animals↗
PubMed1994

A new vitreal drug delivery system using an implantable biodegradable polymeric device.

PURPOSE: The authors evaluated the feasibility of using an implantable biodegradable polymeric device to deliver drugs into the vitreous humor. METHODS: Two types of devices were prepared by compression-molding polymers of poly(DL-lactic acid) of two different molecular weights. The molecular weights of the poly(DL-lactic acid) used were 5,600 (device-1) and 9,100 (device-2). Sodium fluorescein (NaF) served as a hydrophilic drug marker. The release of the dye from the devices was studied in vitro. The intravitreal kinetics of NaF was evaluated in rabbits in vivo by fluorophotometry. The eyes were evaluated electrophysiologically and histologically to determine if there were toxic effects. RESULTS: Device-1 and device-2 released NaF for more than 25 and 45 days, respectively, in vitro. Detectable concentrations of NaF were present in the vitreous up to 17 days (device-1) and 28 days (device-2). Both types of devices were well tolerated, with no noted toxic effects. CONCLUSIONS: These results suggested that this device may be a potentially effective system to deliver drugs in the vitreous.

Animals↗
PubMed2005

Polylactide-polyglycolide antibiotic implants.

Surgeons continually struggle to reduce orthopaedic infections, but no current treatment offers minimum side effects with maximum effectiveness. Antibiotics mixed in plaster of paris have been successful in treating large bony defects in patients with chronic osteomyelitis, and have the advantage of being well tolerated and absorbed by the body. Antibiotics impregnated in polymethylmethacrylate (PMMA) have offered local antibiotic delivery with some success. However, the effect of the antibiotic on the bone cement, the inconsistent elution of the antibiotic, and the need to remove the PMMA implant drives the need for a better system of antibiotic delivery. Polymers or copolymers of antibiotic-impregnated polylactic acid, polyglycolic acid or polyparadioxanone may provide an absorbable system for localized antibiotic delivery. Similar biodegradable systems used to treat small bone fractures have been successful with minimal side effects. In vitro studies have shown promising results of antibiotic elution from bioabsorbable microspheres and beads. Animal in vivo tests have shown that antibiotic impregnated polymers can successfully treat induced osteomyelitis in rabbits and dogs. These studies have provided consistent reproducible results, and now it is time to plan human trials to assess the efficacy of antibiotic microspheres implanted in infected bone and to plan in vivo and in vitro animal testing to investigate the feasibility of antibiotic-polymer-coated components.

Absorbable Implants↗