SEARCH · PubMed Health

Results for “Surface Properties”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

PubMed2002

Comparative investigation of the surface properties of commercial titanium dental implants. Part I: chemical composition.

The surfaces of five commercially available titanium implants (Brånemark Nobel Biocare, 3i ICE, 3i OSSEOTITE, ITI-TPS, and ITI-SLA) were compared by scanning electron microscopy, X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectroscopy. All five implant types were screw-shaped and fabricated from commercially pure (cp) titanium, but their surface properties differed both as regards surface morphology and surface chemical composition. The macro- and microstructure of the implant surfaces were investigated by scanning electron microscopy. The surfaces chemical composition was determined using the surface-sensitive analytical techniques of X-ray photoelectron spectroscopy and time-of-flight secondary ion spectrometry. Surface topographies were found to reflect the type of mechanical/chemical fabrication procedures applied by the manufacturers. The titanium oxide (passive) layer thickness was similar (5-6 nm) and typical for oxide films grown at or near room temperature. A variety of elements and chemical compounds not related to the metal composition were found on some implant types. They ranged from inorganic material such as sodium chloride to specific organic compounds believed to be due to contamination during fabrication or storage. The experimental findings are believed to make a contribution to a better understanding of the interplay between industrial fabrication procedure and physico-chemical implant surface properties.

Journal Article↗

PubMed1993

Gel state surface properties of phosphatidylcholine liposomes as measured with merocyanine 540.

The surface properties of liposomes composed by saturated phosphatidylcholines and their mixtures with cholesterol in the gel state have been studied using merocyanine 540 as a fluorescent and optical probe. A new absorption peak at 450 nm and a new fluorescent band at 630 nm were observed when the dye was added to suspensions of DMPC multilamellar liposomes in the gel state. These peaks were also observed in membranes with different lipid compositions in conditions in which the P beta' and the L beta' phases were present. The increase of temperature above the main transition temperature of DMPC or the incorporation of 35% cholesterol into DMPC bilayers at 13 degrees C caused the disappearance of these peaks. The changes in the absorption and fluorescent spectra upon addition of cholesterol resembles very well the phase diagrams reported by Mortensen et al. ((1988) Biochim. Biophys. Acta 945, 221-245) indicating that the corrugated structures characteristic of the L beta' and the P beta' phases have different surface properties related to the partitioning of amphiphilic dies.

Cholesterol↗

PubMed1984

Surface properties of Sendai virus envelope.

Surface properties of Sendai virus envelope membrane have been measured, using both biological and biophysical techniques. Both normal and trypsin-treated virus were studied. SDS gel electrophoresis showed cleavage of the F protein exclusively by trypsin. The major activity change was observed in the hemolysing activity which is an expression of F protein. Hemolysis was reduced to less than 10% of its value for intact virus. 31P nuclear magnetic resonance studies of the envelope surface of the native virus showed a highly restricted phospholipid headgroup environment. Interestingly, this restriction was relieved by treatment with trypsin. Thus these data suggest a role of the F protein of Sendai virus in tightly organizing the surface of the viral envelope membrane.

Hemolysis↗

PubMed1975

Tissue distribution of EDTA encapsulated within liposomes of varying surface properties.

Liposomes containing ethylenediaminetetraacetic acid (EDTA) were prepared with different surface properties by varying the liposomal lipid constituents. Positively charged liposomes were prepared with a mixture of phosphatidylcholine, cholesterol, and stearylamine. Negatively charged liposomes were prepared with a mixture of phosphatidylcholine, cholesterol, and phosphatidylserine. Neutral liposomes were prepared with phosphatidylcholine alone, dipalmitoyl phosphatidylcholine alone, or with a mixture of phosphatidylcholine and cholesterol. Distribution of 14C-labeled EDTA were determined in mouse tissues from 5 min to 24 h after a single intravenous injection of liposome preparation. Differences in tissue distribution were produced by the different liposomal lipid compositions. Uptake of EDTA by spleen and marrow was highest from negatively charged liposomes. Uptake of EDTA by lungs was highest from positively charged liposomes; lungs and brain retained relatively high levels of EDTA from these liposomes between 1 and 6 h after injection. Liver uptake of EDTA from positively or negatively charged liposomes was similar; the highest EDTA uptake by liver was from the neutral liposomes composed of a mixture of phosphatidylcholine and cholesterol. Liposomes composed of dipalmitoyl phosphatidylcholine produced the lowest liposomal EDTA uptake observed in liver and marrow but modrate uptake by lungs. Tissue uptake and retention of EDTA from all of the liposome preparations were greater than those of non-encapsulated EDTA. The results presented demonstrate that the tissue distribution of a molecule can be modified by encapsulation of that substance into liposomes of different surface properties. Selective delivery of liposome-encapsulated drugs to specific tissues could be effectively used in chemotherapy and membrane biochemistry.

Animals↗

PubMed2002

Influence of wear and overwear on surface properties of etafilcon A contact lenses and adhesion of Pseudomonas aeruginosa.

PURPOSE: To determine changes in physicochemical surface properties of contact lenses (CLs) during daily wear and effects of lens wear on adhesion of a Pseudomonas aeruginosa strain from a patient with CL-related keratitis. METHODS: Ten new CL wearers used ionic, etafilcon A lenses with 58% water on both eyes for approximately 10 hours each day during 10 and 50 days. All lenses were treated daily with an appropriate lens care solution. After the CLs were worn for 10 days (first pair of lenses) and 50 days (second pair, representing overwear), hydrophobicity by water contact angles, surface roughness by atomic force microscope, elemental surface composition by x-ray photoelectron spectroscopy (XPS), and adsorbed proteins by SDS-PAGE were determined on one lens. The lens from the contralateral eye was placed in a parallel plate flow chamber for bacterial adhesion after each time interval. RESULTS: Water contact angles on lenses changed from 45 degrees on unused lenses to 61 degrees +/- 25 degrees after 10 days of wear and changed significantly (P < 0.05) to 27 degrees +/- 14 degrees after 50 days of wear. Surface roughness increased significantly (P < 0.05) from 4 +/- 2 nm (unused) to 10 +/- 7 nm after 50 days of wear. These changes were accompanied by adsorption of proteinaceous material, as evidenced by XPS and SDS-PAGE, demonstrating adsorption of lysozyme, tear lipocalin, and a 30-kDa protein. Initial bacterial adhesion to worn CLs was lower than to unworn CLs. Furthermore, detachment of adhering bacteria from worn lenses was easier than from unworn lenses. The changes observed in the physicochemical surface properties of the lenses after the CLs were worn for 50 days were accompanied by reports of discomfort by 6 of the 10 new CL wearers. Multiple regression analysis revealed that the most predictive variables for an effect on initial deposition after 10 days of wear were hydrophobicity, roughness, the presence of nitrogen-rich material, including the presence of a 30-kDa protein, and the presence of oxygen-rich material-that is, the type of oxygen adsorbed (O equal or parallel C or Ocjs0807;C). After 50 days of wear, roughness and the presence of tear lipocalin were most predictive. CONCLUSIONS: This study demonstrates that the physicochemical surface properties changed after wear and overwear, whereas overwear of the lenses decreased initial adhesion of P. aeruginosa #3 under the present experimental conditions.

Adult↗

PubMed2006

Attention to form or surface properties modulates different regions of human occipitotemporal cortex.

We carried out 2 functional magnetic resonance imaging experiments to investigate the cortical mechanisms underlying the contribution of form and surface properties to object recognition. In experiment 1, participants performed same-different judgments in separate blocks of trials on pairs of unfamiliar "nonsense" objects on the basis of their form, surface properties (i.e., both color and texture), or orientation. Attention to form activated the lateral occipital (LO) area, whereas attention to surface properties activated the collateral sulcus (CoS) and the inferior occipital gyrus (IOG). In experiment 2, participants were required to make same-different judgments on the basis of texture, color, or form. Again attention to form activated area LO, whereas attention to texture activated regions in the IOG and the CoS, as well as regions in the lingual sulcus and the inferior temporal sulcus. Within these last 4 regions, activation associated with texture was higher than activation associated with color. No color-specific cortical areas were identified in these regions, although parts of V1 and the cuneus yielded higher activation for color as opposed to texture. These results suggest that there are separate form and surface-property pathways in extrastriate cortex. The extraction of information about an object's color seems to occur relatively early in visual analysis as compared with the extraction of surface texture, perhaps because the latter requires more complex computations.

Adult↗

PubMed1999

Prediction of membrane permeability to peptides from calculated dynamic molecular surface properties.

PURPOSE: To develop a theoretical method for prediction of transcellular permeability to peptides. METHODS: The dynamic molecular surface properties of 19 oligopeptide derivatives, divided into three homologous series were calculated. The dynamic molecular surface properties were compared with commonly used experimental predictors of membrane permeability such as partition coefficients. Relationships between the dynamic molecular surface properties and intestinal epithelial permeability, as determined in Caco-2 cell monolayers, were used to develop a model for prediction of the transmembrane permeability to the oligopeptide derivatives. RESULTS: A theoretical model was derived which takes both the polar and non-polar part of the dynamic molecular surface area of the investigated molecule into consideration. The model provided a strong relationship with transepithelial permeability for the oligopeptide derivatives. The predictability of transepithelial permeability from this model was comparable to that from the best experimental descriptor. CONCLUSIONS: To our knowledge, this is the first example of a theoretical model that gives a satisfactory relationship between calculated molecular properties and epithelial permeability to peptides by accounting for both the hydrogen bonding capacity and the hydrophobicity of the investigated molecule. This model may be used to differentiate poorly absorbed oligopeptide drugs at an early stage of the drug discovery process.

Biological Transport↗

PubMed1975

Surface properties of the amniotic fluid in normal pregnancy.

The surface properties of the amniotic fluid were determined in 96 normal pregnancies between weeks 23 and 41. The y-max, y-min, hysteresis areaa, and stability index were used as parameters for evaluation of the surface tension are diagrams. These results were plotted against the gestation week and a curve for the normal course of surface tension of the amniotic fluid during the second half of gestation was obtained. The influence of addition of blood, vernix, and meconium to amniotic fluid as well as that of changes in the pH and dilution were examined. The results were unaffected by either blood, vernix, or pH changes. The slight scatter of the y-min values makes this parameter particularly suitable for determining fetal lung maturity.

Amniotic Fluid↗

PubMed1980

Surface properties of LDL-binding lymphocytes in human peripheral blood.

Surface properties of low density lipoprotein (LDL)-binding lymphocytes were evaluated to determine whether LDL binds with a subpopulation of human peripheral blood lymphocytes (PBL). B- and T-cell rich fractions were prepared from PBL using E-rosette formation or nylon reticulum columns. Binding of FITC-labelled LDL with these cell fractions was determined with a fluorescent microscope and a fluorescence-activated cell sorter (FACS II). The specificity of the binding was evaluated by a dose-dependent inhibition of LDL binding with the addition of unlabelled lipoproteins. In parallel studies, surface properties including E-rosette formation, surface immunoglobulins, and receptors for IgG-Fc, as well as human and mouse C3 were examined. LDL binding lymphocytes were enriched in the B-cell rich fraction, and depleted in the T-cell rich fraction. In addition, FITC-LDL binding lymphocytes were selectively collected by the FACS II. These LDL binding cells restored surface immunoglobulins after incubation in serum-free medium following trypsinization. The majority of lymphocytes stimulated by PHA and PWM in vitro bound with LDL. It is concluded that LDL binds with B cells in fresh human PBL, while it binds with B and T cells in mitogen-stimulated lymphocytes. It is suggested that the selective collection of LDL binding lymphocytes by the FACS II can be applied to the evaluation of cellular interaction of these cells in various immunological reactions.

B-Lymphocytes↗

PubMed1999

Phase and surface properties of lipid bilayers containing neoglycolipids.

The physical properties conferred to DPPC bilayers by including neoglycolipids composed by two different trisaccharides: mannose-mannose-mannose (3M) and glucose-mannose-glucose (GMG) attached to a cholesterol (cho) and a distearylglycerol (diC18) lipid moiety by a spacer were evaluated by means of the measurement of the electrokinetic potential and interfacial fluorescent probes. The phase properties measured with diphenylhexatriene (DPH) were correlated with the surface properties measured with merocyanine 540, dansyl, and Laurdan probes. The results show that the surface properties of large unilamellar vesicles depend on the sugar exposure to the water phase and also on the hydrocarbon moiety by which it is anchored to the bilayer. The combination of the cholesterol moiety with the saccharide attenuates the cooperativity decrease induced by the cholesterol moiety without the sugar portion. The neoglycolipid GMG-diC18 promotes opposite effects affecting slightly the cooperativity at the hydrocarbon core of DPPC and displacing the phase transition temperature to higher values. The presence of neoglycolipid with diC18 introduces defects in the packing at the interface of the membrane in the gel state. It is concluded that a relatively low proportion of neoglycolipids affects significantly the interfacial properties of DPPC bilayers in large unilamellar vesicles in the absence of changes at the membrane bulk at 25 degrees C.

1,2-Dipalmitoylphosphatidylcholine↗

PubMed2004

Surface properties and microporosity of polyhydroxybutyrate under scanning electron microscopy.

This study was designed to investigate the surface properties especially surface porosity of polyhydroxybutyrate (PHB) using scanning electron microscopy. PHB granules were sprinkled on the double-sided sticky tape attached on a SEM aluminium stub and sputtered with gold(10nm thickness) in a Polaron SC515 Coater, following which the samples were placed into the SEM specimen chamber for viewing and recording. Scanning electron micrographs with different magnification of PHB surface revealed multiple pores with different sizes.

Biocompatible Materials↗

PubMed1991

Influence of an S-layer on surface properties of Bacillus stearothermophilus.

Various aspects of surface properties of the S-layer-carrying Bacillus stearothermophilus PV72 and of an S-layer-deficient mutant (strain PV72/T5) have been tested by adsorption assays on solid surfaces, electrostatic interaction chromatography and hydrophobic interaction chromatography. The adsorption assays have shown that cell adhesion of the S-layer-carrying strain was less influenced by environmental changes than it was with the S-layer-deficient mutant. Electrostatic interaction chromatography indicated that both strains have positively and negatively charged groups exposed on the cell surface but the S-layer-carrying strain reveals more positively charged groups than does the S-layer-deficient mutant. Hydrophobic interaction chromatography showed that both strains have a hydrophilic surface but that the hydrophilic properties are more pronounced with the strain lacking an S-layer.

Bacterial Adhesion↗

PubMed1998

Effect of surface properties on the antithrombogenicity of silk fibroin/S-carboxymethyl kerateine blend films.

Polymeric blends of silk fibroin (SF) and S-carboxymethyl kerateine (SCMK) were prepared by the solvent casting method to study the effect of surface properties on the antithrombogenicity. The films of SF/SCMK showed better antithrombogenic properties than SF or SCMK alone. Among them, the film containing 50 wt% SCMK showed the best antithrombogenicity. When the SF/SCMK films were treated with methanol, the antithrombogenicity of the films was scarcely affected except the SF-rich ones. The enhanced antithrombogenic properties were explained in terms of polarity of the surface. The blend films showed an enhancement of polar contribution to surface free energy (gamma(P)S and polar stabilization energy (I(SW)). SF-rich films showed high gamma(P)S and I(SW) values when treated with methanol. This change of surface properties was considered to be due to the fact that the conformational transition from random coil structure to beta-structure of proteins may have affected the surface properties, especially the polar properties.

Amino Acids↗

PubMed1990

Surface properties of Staphylococcus aureus affecting chemiluminescence response of human phagocytes.

To assess the surface properties of Staphylococcus aureus affecting the response of human phagocytes, the effects of the organisms with different surface properties on the chemiluminescence (CL) response of human phagocytes were examined. The magnitude of the phagocytic CL response to hydrophobic strains was significantly greater than that to hydrophilic strains, while no significant difference in the CL response was seen between protein A-deficient strains and their parent strains. The CL response to the hydrophilic organisms prepared from a hydrophobic strain by trypsin treatment decreased significantly. These results suggest that the phagocytic CL response to staphylococci depends on the hydrophobicity of the surface, but not on the presence of protein A. Two protein A-deficient strains which were isolated from protein A-positive strains showed identical hydrophobicity with their parent strains. All of the hydrophilic strains isolated from hydrophobic strains possessed protein A identical to that of their parent strains. Moreover, a hydrophilic strain could be isolated from a protein A-deficient, hydrophobic strain. These results strongly suggest that protein A is not solely responsible for the surface hydrophobicity of S. aureus.

Hemagglutination Tests↗

PubMed1981

The surface properties of cells of Mycobacterium BCG.

The surface properties of cells of Mycobacterium BCG, M. phlei, M. Smegmatis and M. microti are identical, irrespective of the growth medium, the age of the cells, and the colonial morphology, and after various vigorous chemical treatments. The negative surface charge for cells of all these species arises from the phosphate groups of phosphodiester linkages between the peptidoglycan and the arabinogalactan of the basic cell wall structure which is common to all species of Mycobacteria.

Dinitrofluorobenzene↗

PubMed2006

Importance of bacterial surface properties to control the stability of emulsions.

In colloidal media such as emulsions or food matrixes, the stability results from physicochemical interactions. The same type of interaction is involved in the attachment processes of microorganisms, through their surface properties, to interfaces. When bacteria are present in a food matrix, it is probable that their surface interacts with the other constituents. In this paper, the involvement of bacterial surface properties of Lactococcus lactis subsp lactis biovar diacetylactis (LLD) on the stability of model emulsions has been studied. The hydrophobic and electrostatic cell-surface properties were characterized by the MATH method and by microelectrophoresis, respectively. The oil-in-water emulsions were stabilized by various surface-active compounds, CTAB, SDS or Tween 20, giving differently charged droplets. Two strains with different surface characteristics were added to the emulsion. Contrasting with emulsions made with the non-ionic surfactant, for which the stability was not modified by the addition of bacteria, the emulsions made with ionic surface-active compounds were unstable in the presence of bacteria when the bacterial surface charge was opposite to the one of the emulsion droplets. Moreover, aggregation and flocculation phenomena were observed for emulsions stabilized with the cationic surfactant, particularly for more negatively charged bacteria. The effect of bacteria on the emulsion stability depended on the strain which shows the importance of the choice of the microorganism according to of the characteristics of the colloidal media to obtain a stable system. In addition, these results suggest that the interactions between bacteria and other food components can influence the position of bacteria in food matrixes.

Bacterial Adhesion↗

PubMed2006

Automatic generation of force fields and property surfaces for use in variational vibrational calculations of anharmonic vibrational energies and zero-point vibrational averaged properties.

An automatic and general procedure for the calculation of geometrical derivatives of the energy and general property surfaces for molecular systems is developed and implemented. General expressions for an n-mode representation are derived, where the n-mode representation includes only the couplings between n or less degrees of freedom. The general expressions are specialized to derivative force fields and property surfaces, and a scheme for calculation of the numerical derivatives is implemented. The implementation is interfaced to electronic structure programs and may be used for both ground and excited electronic states. The implementation is done in the context of a vibrational structure program and can be used in combination with vibrational self-consistent field (VSCF), vibrational configuration interaction (VCI), vibrational Moller-Plesset, and vibrational coupled cluster calculations of anharmonic wave functions and calculation of vibrational averaged properties at the VSCF and VCI levels. Sample calculations are presented for fundamental vibrational energies and vibrationally averaged dipole moments and frequency dependent polarizabilities and hyperpolarizabilities of water and formaldehyde.

Journal Article↗

PubMed2001

Synthesis and Surface Property Variations of Polypropylene-graft-poly(ethylene glycol).

Graft copolymers containing nonpolar main chains and polar side chains capable of acid-base interaction show surface property variations depending on the sample preparation methods. A series of polypropylene-graft-poly(ethylene glycol)s were synthesized and their surface property variations were studied using surface analysis techniques, such as surface contact angle measurement and X-ray photoelectron spectroscopic analysis. Molding against various substrates, dip-coating, vacuum annealing, and water-contact techniques were employed for the experiment. Different surfaces were obtained depending on the degree of acid-base interaction between the polymer surface and interfacing phase. These surface property variations were concluded to be the result of minimum interfacial free energy formation. Copyright 2001 Academic Press.

Journal Article↗