SEARCH · PubMed Health
Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The technology of tooth-bonding materials has developed over the past 20 years to achieve results that are quick, minimally invasive and esthetically pleasing. The following paper is an overview of the advances in tooth-bonding technology over the past 20 years.
Many terms have been used to describe incomplete tooth fractures. This paper reviews them, discusses the clinical features of incomplete tooth fractures and proposes a clinically representative definition.
Explore the source record for details and available documents.
A crown root fracture of a tooth in a young person may necessitate the removal of the root and the placement of a space-maintaining partial denture followed by provision of a bridge. A case is reported of an alternative approach to treatment, in which the root fragment is retained in situ until the end of the pubertal growth spurt, in order to preserve alveolar bone, following which it is removed and replaced by an implant.
AIM: To demonstrate the need for proper restoration of root-filled teeth. SUMMARY: Tooth fracture can be a sequel to root-canal treatment. It is associated with the removal of excessive amounts of the tooth substance during the instrumentation phase, the use of unnecessary force during obturation, or inadequate planning of the design of the eventual coronal restoration to include appropriate cuspal protection. Rarely, a fracture may be present in a tooth before treatment commences, but remains undetected. A case describing incomplete vertical tooth fracture of a root-filled mandibular first molar is presented.
Combined coronal and vertical root fractures are difficult to treat and extraction of the affected tooth is quite often indicated. In anterior teeth, esthetics and function must be reestablished immediately. This case describes the restoration of a fractured upper right central incisor using a glass fiber post and adhesive composite. At the follow-up appointment, 13 months later, clinical and radiographical examinations revealed the glass fiber post and restoration in place, suggesting the efficacy of the treatment in maintaining fractured tooth.
Nowadays, fractured teeth are difficult to treat effectively. Currently, root fractures are usually treated by root amputation, hemisection or tooth extraction. If the fusion of tooth fracture by laser were possible, it would offer a different therapy to repair fracture teeth. We tried to use a developed DP-bioactive glass paste to fuse or bridge the tooth crack line by a medium energy continuous-wave CO2 laser. The study is divided into three parts: (1) The compositional and structure changes in tooth enamel and dentin after laser treatment; (2) The phase transformation and recrystallization of DP-bioactive paste during exposure to the CO2 laser; (3) The thermal interactions and bridge mechanism between DP-bioactive glass paste and enamel/dentin when they are subjected to CO2 laser. The present report will focus on the second part that will examine the changes of laser-exposed DP-bioactive glass paste by means of X-ray diffractometer (XRD), Fourier transforming infrared spectroscopy (FTIR), differential thermal analysis/thermogravimetric analysis (DTA/TGA), and scanning electron microscopy (SEM). From the study, we could find that the temperature increase due to laser irradiation is greater than 900 degrees C and that the DP-bioactive glass paste could be melted in a short period of time after irradiation. In the study, we successfully developed a DP-bioactive glass paste which could form a melting glass within seconds after exposure to a medium energy density continuous-wave CO2 laser. The paste will be used in the near future to bridge the enamel or dentin surface crack by the continuous-wave CO2 laser.
A case has been described that employed two restorative techniques used in novel ways. A dentin bonding system was used to reattach a fractured tooth fragment and a new flowable resin composite was placed to "fill in the cracks." This technique was recommended only as a temporary restoration and was used during an emergency visit. The restoration was accomplished in a timely fashion and can be recommended for use if excellent technique, including the use of the rubber dam, is followed.
Explore the source record for details and available documents.
Acute trauma or trauma associated with occlusal disharmony can produce tooth crack or fracture. Although several methods are proposed to treat the defect, however, the prognosis is generally poor. If the fusion of a tooth fracture by laser is possible it will offer an alternative to extraction or at least serve as an adjunctive treatment in the reconstruction. The responses of soft tissues to lasers of different wavelengths are fairly well known, but the reactions of hard tissues are still to be understood. The purpose of this research was to study the feasibility of using a medium energy continuous-wave CO(2) laser and a low melting-point bioactive glass to fuse or bridge tooth fractures. The present report is focused on the first part of the research, the analysis of changes in laser-irradiated human tooth enamel/dentin by means of X-ray diffractometer (XRD), Fourier-transforming infrared spectroscopy (FTIR), differential thermal analysis/thermogravimetric analysis (DTA/TGA), and scanning electron microscopy (SEM). After CO(2) laser irradiation, there were no marked changes in the X-ray diffraction pattern of the enamel when compared to that before laser treatment. However, a small peak belonging to alpha-TCP appeared at the position of 2theta=30.78 degrees C. After being treated with CO(2) laser, the dentin showed much sharper peaks on the diffraction patterns because of grain growth and better crystallinity. alpha-TCP and beta-TCP were identified after laser treatment. In the FTIR analysis, an HPO(4)(-2) absorption band was noted before laser treatment disappeared after the irradiation. No significant change in the absorption band of HPO(4)(-2) was found on the FTIR curves of enamel after laser treatment. The results of DTA/TGA indicated that loss of water and organic materials occurred in both enamel and dentin after laser treatment. Under SEM, melting and resolidification occurred in both enamel and dentin by medium energy of CO(2) laser. This implies that using a continuous-wave CO(2) laser of medium energy density to fuse a low melting-point bioactive glass to the enamel/dentin is possible. We believe these phase changes and thermal data can make a useful guide for future studies on the thermal interaction and bridging mechanism between the bioactive glass and enamel/dentin under CO(2) laser irradiation.
The case presented is designed to draw attention to the increasingly common occurrence of tooth fracture as a result of trauma incurred from a barbell inserted during tongue piercing. Oral piercing is on the rise. Of concern to health personnel are the associated risks, which include damage to dentition, infection, speech impediment and nerve damage. Also of concern is the belief that in some cases, clients considering body piercing may not be receiving sufficient care instructions, hence putting them at greater risk of post-operative complications. We conclude that a public health campaign in the form of health promotion and education is mandatory to ensure safe responsible piercing, and recommend that workshops, forums and educational leaflets aimed at the piercers, the clientele and the health care workers be developed in Alberta.
OBJECTIVE: The purpose of the present study was to evaluate the preventive effect of pulsed Nd:YAG laser irradiation with 38% diamine silver fluoride [Ag(NH3)2F] solution for the fracture of endodontically treated teeth in vitro. BACKGROUND DATA: There have been no reports on the preventive effect of tooth fracture using Nd:YAG laser with Ag(NH3)2F solution. MATERIALS AND METHODS: Twenty-eight human extracted teeth were used in this study. The teeth were randomly classified into four groups: control group, where tooth surfaces were not submitted to any treatment; group 1, where tooth surfaces were coated with 38% Ag(NH3)2F solution; group 2, where tooth surfaces were coated with Ag(NH3)2F solution and irradiated by pulsed Nd:YAG laser for 2 sec; and group 3, where tooth surfaces were coated with Ag(NH3)2F solution and irradiated by pulsed Nd:YAG laser for 10 sec. After preparation, shear tests were performed and the maximum load for the fracture was measured. Results were analyzed using the Scheffe test, and difference at p < 0.05 was considered significant. RESULTS: The failure load for group 2 (mean, 182.5 kg) had the highest mean value and differed significantly from those for the control group (mean, 146.3 kg) and group 1 (mean, 147.1 kg; p < 0.05). The failure loads for groups 1 and 3 (mean, 150.0 kg) did not differ significantly from that for the control group (p > 0.05). CONCLUSION: The results show that the application of 38% Ag(NH3)2F solution followed by pulsed Nd:YAG laser irradiation for 2 sec is useful for prevention of tooth fracture at endodontically treated teeth.
Explore the source record for details and available documents.
A single-appointment technique for the reuse of an existing crown, the margins of which are intact after tooth fracture, has been presented. Composite resin used in conjunction with a dentin bonding agent serves as a core and cement sealer. Para Posts or TMS pins and undercut areas in tooth structure are used for retention.
Explore the source record for details and available documents.
Reattachment of a fractured clinical crown involving minimal invasion of the biologic width can be accomplished without conventional ostectomy and crown lengthening so that satisfactory esthetics can be achieved. Adhesive techniques sometimes in conjunction with traditional mechanical retention, such as a post, can be used to reattach the fractured segment. An esthetic result can be obtained with a minimal number of procedures and cost to the patient.
Explore the source record for details and available documents.