PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “WASTES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

Contribution of stack gases and solid process wastes to the organic pollutant output of thermal waste treatment plants.

Within the scope of fundamental investigations as well as individual research projects (W. Knorr, B. Hentschel, C. Marb. S. Schädel, M. Swerev, O. Vierle, J.-P. Lay, 1999. Rückstände aus der Müllverbrennung-Chancen für eine stoffliche Verwertung von Aschen und Schlacken. Initiativen zum Umweltschutz, 13 ed., Deutsche Bundesstiftung Ulmwelt, Erich Schmidt, Berlin), the Bavarian State Office for Environmental Protection performs emission measurements at thermal waste treatment plants to optimize operation, to accompany and support development of new technologies, and to study the effect of this kind of waste treatment technology on the environment. Based on recent studies (October 1995-July 1999) at six municipal solid waste incinerators (MSWI) in Bavaria all emission streams (solid and gas) are characterized with respect to organic pollutant contents and compared to the emissions of waste pyrolysis. The significant ranges of pollutant concentration as well as the specific congener patterns observed are similar for all MSWI, regardless of differences in technical design and waste input, but differ markedly from those of the pyrolysis products. The overall approach, including the sampling of all output streams and the determination of mass streams and volume flow rates, allows the calculation of the total output of different organic pollutants for waste incineration plants aand to estimate the relative contribution of each of the emission streams to the total pollutant load. Removal efficiencies are also calculated for the air pollution control (APC) systems of the different MSWI plants.

Air Movements↗

Waste gas monitor reduces wasted volatile anesthetic.

OBJECTIVE: The increasing focus on health care costs requires that all physicians evaluate practice behaviors. The primary emphasis in anesthesia has been limiting the use of expensive medications and interventions. Reducing waste is another approach, and volatile anesthetics are an appropriate target in that simple reduction of fresh gas-flow (FGF) rates is effective. A monitor that measures and displays the cost of wasted volatile anesthetic was developed and used to determine if real-time display of the cost would result in decreased FGF rates, which, in turn, would decrease wasted anesthetic. METHODS: The waste gas monitor (WGM) measures flow rate at the anesthesia machine's scavenger port, integrates this with agent concentration, and displays the calculated cost, real-time, on a portable computer screen. The WGM equipment was attached to the anesthesia machine in the gynecologic surgery operating room (OR) and those cases performed under general endotracheal anesthesia and lasting longer than one hour were eligible for inclusion. First year anesthesiology residents assigned to the study OR as part of a non-specialty rotation, were the subjects of the study. For each resident, after data were collected from at least two eligible baseline cases (Baseline Phase, WGM not visible and resident unaware of its presence), the monitor was introduced and data collection continued for at least three more eligible cases (Visible Phase). RESULTS: Nine residents were initially enrolled, but due to scheduling difficulties only five residents completed the protocol. Data from cases using the WGM demonstrated a 50% decrease (3.58 +/- 1.34 l/min vs. 1.78 +/- 0.51 l/min (p = 0.009)) in the scavenger flow rates, which resulted in a 48% ($5.28 +/- 0.68 vs. $2.72 +/- 0.80 (p = 0.002)) decrease in hourly cost of wasted volatile anesthetic. There was no difference between the Baseline and Visible phases with regard to use of nitrous oxide or intravenous anesthetic agents. CONCLUSIONS. The WGM decreased wasted volatile anesthetic by encouraging decreased FGF rates.

Anesthetics, Inhalation↗

Hazardous waste management system: identification and listing of hazardous waste--Environmental Protection Agency. Interim final rule and request for comments.

The Environmental Protection Agency [EPA] is today revising the regulations for hazardous waste management under the Resource Conservation and Recovery Act to exempt certain categories of mixtures of solid wastes and hazardous wastes from the presumption of hazardousness presently contained in the regulations. EPA is taking this action because the Agency believes that the risk posed to human health and the environment from the management of these waste mixtures is not substantial, so that automatically defining these waste mixtures as hazardous is inappropriate. This amendment will substantially reduce the regulatory burden to those persons who would otherwise have applied the regulations for hazardous waste management to these mixtures.

Hospitals↗

Illinois, phase I interim authorization of state hazardous waste management program--Environmental Protection Agency, Region V. Granting of phase I interim authorization to state hazardous waste program.

The State of Illinois has applied for Interim Authorization of its hazardous waste program under Subtitle C of the Resource Conservation and Recovery Act of 1976, as amended (RCRA) and EPA guidelines for the approval of State hazardous waste programs (40 CFR Part 123, Subpart F). USEPA has reviewed the Illinois hazardous waste program and has determined that the Illinois hazardous waste program is substantially equivalent to the Federal program. USEPA is hereby granting Phase I Interim Authorization to Illinois to operate a hazardous waste program in lieu of Phase I of the Federal hazardous waste program in its jurisdiction.

Environmental Health↗

Use of flue gas desulphurisation (FGD) waste and rejected fly ash in waste stabilization/solidification systems.

Stabilization/solidification (S/S) processes have been used as the final treatment step for hazardous wastes prior to land disposal. Fly ash is a by-product of coal-fired power generation; a significant proportion of this material is low-grade, reject material (rFA) that is unsuitable as a cement replacement due to its high carbon content and large particle size (>45 microm). Flue gas desulphurization (FGD) sludge is a by-product from the air pollution control systems used in coal-fired power plants. The objective of this work was to investigate the performance of S/S waste binder systems containing these two waste materials (rFA and FGD). Strength tests show that cement-based waste forms with rFA and FGD replacement were suitable for disposal in landfills. The addition of an appropriate quantity of Ca(OH)2 and FGD reduces the deleterious effect of heavy metals on strength development. Results of TCLP testing and the progressive TCLP test show that cement-rFA-Ca(OH)2 systems with a range of FGD additions can form an effective S/S binder. The Leachability Index indicates that cement-based waste forms with rFA replacement were effective in reducing the mobility of heavy metals.

Calcium Hydroxide↗

Environmental variables in a holistic evaluation of land contaminated by historic mine wastes: a study of multi-element mine wastes in West Devon, England using arsenic as an element of potential concern to human health.

Unusual and unexpected concentrations of a number of elements were identified in samples of house dust, that indicated the presence of mine wastes in an area where they were not expected. In pursuing this matter, several other very unusual observations and practices, involving highly contaminated mine wastes, were also identified. Here, using an available, but not a custom-made database, the matter is pursued. In England and Wales, the usual framework within which hazards are assessed, starts with an identification of those levels of exposure to elements which are considered to be safe and acceptable. At the other extreme, levels that are considered to be hazardous are identified together with procedures for dealing with them for different situations; for example, the manner in which contaminated land is to be used. The level at which an identification of sites and their use rests with the Local Authority, such as District Councils. Although new legislation is pending; at present for the non-occupationally exposed population there are no firm values to define which levels are acceptable and those that are not acceptable. One of the elements in the samples is arsenic and, because of its well-known toxicity, this element is selected to be of prime concern. However, simultaneous exposure to the general public is from a number of other elements, such as copper, lead, zinc, antimony, molybdenum, tin, selenium and mercury which are present in the mine wastes. The collective impairment to human health, if it should occur, is far too complex to evaluate, hence a need to focus attention upon arsenic which by any standard is present in some samples at very high concentrations, for example > 1000 mg/kg. Irrespective of any changes in permitted levels of exposure to the general public in the study area, together with those that are occupationally exposed, it is the past exposure that will give rise to the present patterns of morbidity and mortality. Because of a latent period between exposure and effects for the induction of cancers, of between 5 and 20 years, past exposures cannot be ignored. They need to be evaluated before changes are made in legislation. In England and Wales, concern to health is, in practice, invoked when there is clinical evidence of harm. With the exception of a few accidents in the study area of SW England, this is not identified, hence it is accepted, in practice, to conclude that no harm accrues following acute or chronic exposure to the mine wastes. There are reasons for questioning this, but if eventually supported, then the current very high costs for remediation of land may not be necessary and brown field sites can be used for a number of purposes. The primary concern is the lack of adequate scientific and clinical data, in relation to exposure to the wastes for the past 100 years or so. For many elements, compounds and substances, the general public is being made aware of potential risks to health but often the levels are extremely low. Using basic geochemical data for any area, it is possible to evaluate the expected background levels for elements. They should serve to identify levels that are acceptable, i.e. it is impractical or uneconomic to reduce them. Within the environment, simple tests are also available that can be used to rank risks to fauna and flora. There are also well-structured clinical evaluations of harm to humans available, which can also be ranked. All three need to be considered in the establishment of safe levels of exposure. It may not be practical to identify universal levels for exposure, rather each site, area or region needs to be considered separately in order to rank the potential risks. For the study area the exposures can be extremely high; compared with the general population, the number who are exposed is probably small. It is surprising that no effects upon human health have been noted.

Arsenic↗

Transport and fate of organic wastes in groundwater at the Stringfellow hazardous waste disposal site, southern California.

In January 1999, wastewater influent and effluent from the pretreatment plant at the Stringfellow hazardous waste disposal site were sampled along with groundwater at six locations along the groundwater contaminant plume. The objectives of this sampling and study were to identify at the compound class level the unidentified 40-60% of wastewater organic contaminants, and to determine what organic compound classes were being removed by the wastewater pretreatment plant, and what organic compound classes persisted during subsurface waste migration. The unidentified organic wastes are primarily chlorinated aromatic sulfonic acids derived from wastes from DDT manufacture. Trace amounts of EDTA and NTA organic complexing agents were discovered along with carboxylate metabolites of the common alkylphenolpolyethoxylate plasticizers and nonionic surfactants. The wastewater pretreatment plant removed most of the aromatic chlorinated sulfonic acids that have hydrophobic neutral properties, but the p-chlorobenzene-sulfonic acid which is the primary waste constituent passed through the pretreatment plant and was discharged in the treated wastewaters transported to an industrial sewer. During migration in groundwater, p-chlorobenzenesulfonic acid is removed by natural remediation processes. Wastewater organic contaminants have decreased 3- to 45-fold in the groundwater from 1985 to 1999 as a result of site remediation and natural remediation processes. The chlorinated aromatic sulfonic acids with hydrophobic neutral properties persist and have migrated into groundwater that underlies the adjacent residential community.

California↗

Improving radioactive waste management: an overview of the Environmental Protection Agency's low-activity waste effort.

Radioactive waste disposal in the United States is marked by a fragmented regulatory system, with requirements that often focus on the origin or statutory definition of the waste, rather than the hazard of the material in question. It may be possible to enhance public protection by moving toward a system that provides disposal options appropriate for the hazard presented by the waste in question. This paper summarizes aspects of an approach focusing on the potential use, with appropriate conditions, of Resource Conservation and Recovery Act Subtitle-C hazardous waste landfills for disposal of "low-activity" wastes and public comments on the suggested approach.

Decision Making↗

[What efforts are being made by dentists in the Flemish region for the limiting of amalgam rejection? A study conducted on a representative sample of 373 Flemish dentists on the subject of amalgam waste: extent of the problem, waste management and foreseeable solutions].

The great Amalgam debate is also taking place in Flanders (Belgium). Mercury amalgam has been used for dental fillings since the last century. Over that time, questions have occasionally been raised with regard to its safety (mercury vapour given off by the amalgam fillings and the possible dangers that these could cause to the patient and the dentist) and with regard to the ecological impact of amalgam waste. Some materials used to treat dental patients endanger the environment. The most important polluting materials are the heavy metals, in particular mercury. This study investigated the answers to the following research questions: What is the total volume of amalgam that is used in Flemish dentistry and what part ended up in the household waste? How do Flemish dentists manage (store and dispose of) their dental amalgam waste? Are Flemish dentists using any alternatives (amalgam separators or alternative materials for dental fillings) for amalgam? A randomly selected group of 500 dentists working in the Flemish part of Belgium was invited to answer a mail questionnaire. A total of 373 dentists responded (response rate 74.6%), providing a representative sample. Of the 5000 kg amalgam being used in one year in Flemish dentistry, about 1.200 kg is discharged either into the sewage or into the household waste. Furthermore, a supplementary 1.900 kg amalgam (extracted teeth with amalgam fillings or bored out amalgam fillings) is also being discharged either into the sewage or into the household waste. Although dental amalgam is the restorative material most used in Flanders, composite materials are becoming more widely used. Only 5% of the respondents were using an amalgam separator.

Attitude of Health Personnel↗

The municipal solid waste system and solid waste characterization at the municipality of Veles, Macedonia.

A short-term study to characterize the solid waste stream in the Municipality of Veles, Macedonia, was performed during a 1 week period in the summer of 2002. In this study, several important parameters of the municipal solid waste stream were assessed. It was estimated that the average daily generation rate is 1.06+/-0.56 kg/cap/day, while the specific weights of the uncompacted and compacted solid waste are approximately 140.5 kg/m3 and 223 kg/m3, respectively. Furthermore, it was estimated that the daily generated volume of uncompacted waste is 7.5+/-4 L/cap/day. Although the short-term study is characterized by numerous limitations, in the absence of other existing data, such a study with direct measurements could significantly contribute to the development of an efficient solid waste management system in countries with economies in transition like Macedonia.

Cities↗

Life cycle assessment of the waste hierarchy--a Danish case study on waste paper.

The waste hierarchy is being widely discussed these days, not only by cost-benefit analysts, but a growing number of life cycle assessments (LCA) have also begun to question it. In this article, we investigate the handling of waste paper in Denmark and compare the present situation with scenarios of more waste being recycled, incinerated or consigned to landfill. The investigations are made in accordance with ISO 14040-43 and based on the newly launched methodology of consequential LCA and following the recent guidelines of the European Centre on Waste and Material Flows. The LCA concerns the Danish consumption of paper in 1999, totalling 1.2 million tons. The results of the investigation indicate that the waste hierarchy is reliable; from an environmental point of view recycling of paper is better than incineration and landfilling. For incineration, the reason for the advantage of landfilling mainly comes from the substitution of fossil fuels, when incinerators provide heat and electricity. For recycling, the advantage is related to the saved wood resources, which can be used for generating energy from wood, i.e., from renewable fuel which does not contribute to global warming.

Conservation of Energy Resources↗

Modeling of nuclide release from low-level radioactive paraffin waste: a comparison of simulated and real waste.

Nuclide leaching models based on mass transfer theory are reviewed and evaluated to analyze the leaching test results of simulated and real paraffin waste from Korean nuclear power plants (NPPs). An empirical model (EM), bulk diffusion model (BDM), coupled diffusion/dissolution model (CDDM), shrinking core model (SCM), modified SCM (MSCM), and uniform reaction model (URM) are selected for comparison. In case of simulated paraffin waste form, the experimental results are satisfactorily explained by the SCM which is based on a diffusion-controlled dissolution reaction. Leaching behavior of real paraffin waste form is well predicted by URM that considers inter-aggregated porous medium and intra-aggregated porous medium separately. If real paraffin waste forms are manufactured with relatively uniform composition, their leaching behaviors are expected to be similar to those of simulated paraffin waste forms.

Diffusion↗

On the track of medical waste. Will a national medical waste policy wash up on the beach?

There's no question that medical waste pushes the nation's panic button. It took only two summers (1987 and 1988) of needles and syringes washing ashore to generate a groundswell of public anxiety that caused Congress to pass the Medical Waste Tracking Act of 1988. The act was the federal government's first attempt at cradle to grave waste management through a two-year pilot program involving four states and Puerto Rico. Now that the act and the pilot program have expired, Congress must evaluate their impact and decide whether to pursue a national medical waste policy. Such a policy likely would address the work practices of occupational groups, such as laundry workers, who frequently have contact with medical waste.

Communicable Disease Control↗

Solid waste digestors: process performance and practice for municipal solid waste digestion.

The most common types of anaerobic digesters for solid wastes have been compared based on biological and technical performance and reliability. Batch systems have the most simple designs and are the least expensive solid waste digesters. They have high potential for application in developing countries. Two-stage systems are the most complex and most expensive systems. Their greatest advantage lies in the equalisation of the organic loading rate in the first stage, allowing a more constant feeding rate of the methanogenic second stage. Two-stage systems with biomass accumulation devices in the second stage display a larger resistance toward toxicants and inhibiting substances such as ammonia. However, the large majority of industrial applications use one-stage systems and these are evenly split between "dry" systems (wastes are digested as received) and "wet" systems (wastes are slurried to about 12% total solids). Regarding biological performance, this study compares the different digester systems in terms of organic loading rates and biogas yields considering differences in input waste composition. As a whole, "dry" designs have proven reliable due to their higher biomass concentration, controlled feeding and spatial niches. Moreover, from a technical viewpoint the "dry" systems are more robust and flexible than "wet' systems.

Bacteria, Anaerobic↗

[Co-composting of high moisture vegetable waste, flower waste and chicken litter in pilot scale].

Co-composting of different mixture made of vegetable waste, flower waste and chicken litter were studied. The first stage of composting was aerobic static bed based temperature feedback and control via aeration rate regulation. The second stage was window composting. At first stage, the pile was insulated and temperatures of at least 55 degrees C were maintained for a minimum of 3 days. The highest temperature was up to 73.3 degrees C. This is enough to kill pathogens. Moisture of pile decreased from 75% to 56% and organic matter was degraded from 65% to 50% during composting. The value of pH was stable at 8. Analysis of maturity and nutrition of compost showed that end-products of composting ware bio-stable and had abundant nutrition. This shows that co-composting of vegetable waste, flower waste and chicken litter can get high quality compost by optimizing composting process during 45 days. Composting can decrease nonpoint resource of organic solid waste by recycling nutrition to soil and improve fertility of soil.

Animals↗

[Proper disposal(management) of medical wastes--management of medical waste at University Hospital attached to School of Medicine, Nagasaki University].

University hospitals, not only provide medical care but also perform education and research activities. The waste at university hospital differs from waste at another medical institutions. Because there are various kinds of waste containing toxic chemical substances and recombinant DNA, care should be taken in treating such waste.

Animals↗

Why energy from waste incineration is an essential component of environmentally responsible waste management.

This paper outlines the key factors involved in adopting energy from waste incineration (EfWI) as part of a waste management strategy. Incineration means all forms of controlled direct combustion of waste. 'Emerging' technologies, such as gasification, are, in the author's view, 5 to 10 years from proven commercial application. The strict combustion regimen employed and the emissions therefrom are detailed. It is shown that EfWI merits consideration as an integral part of an environmentally responsible and sustainable waste management strategy, where suitable quantities of waste are available.

Air Pollutants↗

Embedding of laboratory wastes in clay or concrete blocks, with special reference to baking osmic acid and cacodylic acid wastes with clay.

Liquid laboratory waste containing osmic acid and cacodylic acid was mixed with potter's clay or hydraulic cement. The clay-waste product was kneaded into blocks and baked in a klin (1,200-1,400 degrees C). The cement-waste product was allowed to harden into concrete blocks. Some of the baked clay blocks and concrete blocks were ground, and immersed in 1 N NaOH or 10% HCI solutions for 3-6 months. X-ray microanalysis of the dried samples of these solutions showed that no leakage of osmium and arsenic occurred in the baked clay embedding, and that some leakage of these agents occurred in the concrete embedding. The present study indicates that the baked clay embedding method is useful for safe storage of dangerous laboratory wastes. Additional experiments suggested that glass embedding is also useful for safe storage of laboratory wastes or harmful metals.

Aluminum Silicates↗