SEARCH · PubMed Health

Results for “WELDING”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

PubMed2001

[Mechanical properties of weld area soldered by lasers and structural changes in hot reaction zone].

OBJECTIVE: To analyse and measure the welding depths and strengths of three kinds of welding materials under different laser welding conditions as well as the structural changes of the heat affected zone. METHODS: Under different voltages and pulse duration three kinds of measuring sticks, including Co-Cr alloy, Ni-Cr alloy and pure titanium were welded and their strengths were compared with that of control group. At the same time, the structure of the heat-affected zone was analysed by means of the gold-phase method. RESULTS: The welding depth and strength of Co-Cr alloy were in direct proportion to the setting voltage, with averages of 335MPa (250V) to 573MPa(330V). At the heat-affected zone, the crystal particle was small and the end point of welding by laser bean presented the shape of the mountain peak and the interval of finger shape. The center of measuring sticks had a black zone with the circle shape. The setting voltage was in direct proportion to the welding depth of pure titanium and in inverse proportion to the welding strength with averages of 221MPa(250V) to 154MPa (330V). The crystal particle in the heat affected zone grew large and the solid phase expanded, the interval of the crystal oxidised, and the structure showed honeycomb changes. CONCLUSION: The laser welding is favourable to the welding properties of Co-Cr and Ni-Cr alloys, but its effect on the welding properties of pure titanium needs further discussion.

Biomechanical Phenomena↗

PubMed2004

Optimizing mechanical properties of laser-welded gold alloy through heat treatment.

OBJECTIVE: The goal of this work was to improve the mechanical strength of laser-welded gold alloy with age-hardenability at intraoral temperature. METHODS: The gold alloy was cast conventionally in plate patterns (0.5 mm x 3.0 mm x 20 mm). After bench-cooling the mold to room temperature (as-cast state), transverse sections of the plate were made at mid-span. They were butted against one another and welded using Nd:YAG laser (current: 320 A; time: 10 ms; spot diameter: 1 mm). Three laser pulses were applied from both sides to cover the joint width (3.0 mm) of the specimens before or after solution heat treatment at 700 degrees C/5 min. Uncut control specimens (non-welded) were also prepared. After solution treatment, two different heat treatments were given the laser-welded specimens: high-temperature aging at 250 degrees C/15 min, or intraoral aging at 37 degrees C/3 days. Control specimens underwent all of the heat treatments after solution treatment. Tensile testing was conducted at a crosshead speed of 2 mm/min and a gauge length of 10 mm. RESULTS: Solution treatment of the gold alloy before laser-welding did not improve the mechanical strength of laser-welded gold alloy after high-temperature aging or intraoral aging. The joint strengths of laser-welded gold alloy were improved only by solution heat treatments after laser-welding and subsequent aging treatment at high or intraoral temperatures. SIGNIFICANCE: The results of this study indicated that laser-welded cast gold alloy prostheses aged at high or intraoral temperatures produce high strength when they are solution-treated after laser-welding.

Dental Soldering↗

PubMed2005

Arc and resistance welding and tumours of the endocrine glands: a Swedish case-control study with focus on extremely low frequency magnetic fields.

BACKGROUND: Mechanisms for potential effects of extremely low frequency (ELF) magnetic fields on carcinogenesis have not been identified. A potential pathway could be an interaction with the endocrine system. AIMS: To analyse occupational exposure to ELF magnetic fields from welding, and tumours of the endocrine glands. METHODS: This case-control study was based on a cohort with an increased prevalence of high exposed individuals. A total of 174 incident cases of tumours of the endocrine glands, 1985-94, were identified and data were obtained from 140 (80%) of these cases; 1692 controls frequency matched on sex and age were selected, and information on 1306 (77%) individuals was obtained. A short questionnaire was sent to a work administrator at the workplaces of the cases and controls. The exposure assessment was based on questions about job tasks, exposure to different types of welding, and exposure to solvents. RESULTS: There was an overall increased risk for all tumours of the endocrine glands for individuals who had been welding sometime during the follow up. The increased risk was attributable to arc welding; for resistance welding there was no clear evidence of an association. We found an increased risk for the adrenal glands in relation to arc welding, and for the parathyroid glands in relation to both arc welding and resistance welding. An imprecise increase in risk was also noted for tumours of the pituitary gland for arc welding. No confounding effect was found for solvent exposure, and there was no sign of biological interaction. CONCLUSION: The increased risks of endocrine gland tumours related to welding might be explained by exposure to high levels of ELF magnetic fields.

Adrenal Gland Neoplasms↗

PubMed2003

Prevalence and association of welding related systemic and respiratory symptoms in welders.

BACKGROUND: The prevalence of welding related respiratory symptoms coexisting with welding related systemic symptoms in welders is unknown. AIMS: To determine in a sample of welders the prevalence of coexisting welding related systemic symptoms indicative of metal fume fever (MFF) and welding related respiratory symptoms suggestive of occupational asthma (OA), and the strength and significance of any association between these two groups of symptoms. METHODS: A respiratory symptoms questionnaire, a systemic symptoms questionnaire, and a questionnaire on occupational history were administered by telephone to 351 of a sample of 441 welders (79.6%) from two cities in Québec, Canada. RESULTS: The co-occurrence of possible MFF (defined as having at least two symptoms of fever, feelings of flu, general malaise, chills, dry cough, metallic taste, and shortness of breath, occurring at the beginning of the working week, 3-10 hours after exposure to welding fumes) together with welding related respiratory symptoms suggestive of OA (defined as having at least two welding related symptoms of cough, wheezing, and chest tightness) was 5.8%. These two groups of symptoms were significantly associated (chi(2) = 18.9, p < 0.001). CONCLUSION: There is a strong association between welding related MFF and welding related respiratory symptoms suggestive of OA. As such, MFF could be viewed as a pre-marker of welding related OA, a hypothesis that requires further investigation.

Adult↗

PubMed2005

Is electric arc welding linked to manganism or Parkinson's disease?

Manganese and its inorganic compounds are widely used in many industries and have been accepted as occupational neurotoxins that have caused a distinct and disabling clinical entity, manganism, in several types of work, notably where exposure is by way of dust. There is inconclusive and inconsistent evidence that, in these occupations, subclinical neurological effects, detectable only by neurobehavioural studies, may be caused by low doses. This has prompted a re-evaluation of occupational exposure limits. Some countries, including the UK, already demand much higher levels of protection against exposure than 5 years ago. Welding is the most common source of occupational exposure as manganese is an essential component of steel and so its compounds are inevitable components of fume emitted from steel welding processes. There it is found in respirable particles, often as complex oxides (spinels), sometimes within a core protected by a silicon oxide shell - as distinct from the much simpler form of particle formed by disintegration in processes such as mining and ore milling where manganism has been diagnosed convincingly. Millions of workers are at risk of exposure to manganese-containing compounds in fumes from electric arc welding of steel. In recent years it has been asserted that neurological and neurobehavioural disorders may develop consequent to exposure to steel welding fumes and that employment as a welder is associated with the unusually early onset of Parkinson's disease. Causal relationships have been postulated. Welders have been recorded as having been exposed to high levels of manganese-containing fume, especially where they have worked in confined, unventilated spaces, although this appears from limited data to be the exception rather than the rule. Even then the dose received is generally less than in mining or ore crushing. When care is taken to exclude exposures from hardfacing and burning and cutting arc processes, where manganese may form a high percentage of the fume, manganese compounds usually form a relatively low percentage of the composition of welding fume particles, <2.0%, much outweighed by iron. Although these manganese-compound-containing welding fume particles are insoluble in water, the manganese compounds in particles that are retained in the alveoli may be absorbed, at least in part. Manganese concentrations in biological material samples in some exposed groups reflect this relative to unexposed workers. Some of the transfer systems for absorption and transport, including across the blood-brain barrier, are used in competition with iron which is present in abundance in welding fume. This may reduce absorption of manganese in welders and thus reduce the opportunity for sufficient doses to cause neurotoxicological consequences. Scrutiny of the literature covering the last 40 years has revealed only five cases that meet sufficient criteria for manganism to just cross the diagnostic threshold, and even then they carry a degree of doubt with them. This low incidence alone gives notice that welders have not been and are not at high risk of clinically apparent damage from exposure to manganese. If this needs to be further emphasised, there is the fact that the literature contains no confirmed cases of manganism in welders. Assertions of abnormal results in neurobehavioural studies of welders have raised the possibility of there being a subclinical form of manganism with loss of fine motor control as one of its features. While observations of such changes in workers in other industries have caused regulators in some countries to apply more stringent controls of exposure, as yet the results lack convincing consistency and there is no indication of any dose-effect relationship. If welding fume can have these motor effects it would be a heavy and perhaps career-ending blow to those affected. It would not be prudent to dismiss the warnings sounded by the results of studies of welders, no matter how flawed these investigations are, but wiser and better to act with vigour to reduce exposure and monitor the effectiveness of this additional protection whilst conducting high quality research to allow sound conclusions to be drawn as to whether there actually is a subclinical disorder. Idiopathic Parkinson's disease is a common disorder affecting 1-2% of those in the general population aged >65 years. It has been suggested, on flawed and contested evidence, not that welding causes the disease but rather that employment as a welder carries with it the risk of developing this disease at a younger age than if that trade had not been followed. Manganese in welding fume has been nominated as the neurotoxin. This may be biologically feasible if manganese destroys insufficient receptor cells to produce clinical manganism but sufficient to enhance the effects of a reduced supply of dopamine to give the manifestations of already developing idiopathic Parkinson's disease earlier in the course of destruction of the substantia nigra than if all receptors were intact.

Humans↗

PubMed2000

Laboratory evaluation of welder's exposure and efficiency of air duct ventilation for welding work in a confined space.

CO2 arc welding in a confined space was simulated in a laboratory by manipulating a welding robot which worked in a small chamber to experimentally evaluate the welder's exposure to welding fumes, ozone and carbon monoxide (CO). The effects of the welding arc on the air temperature rise and oxygen (O2) concentration in the chamber were also investigated. The measuring points for these items were located in the presumed breathing zone of a welder in a confined space. The time averaged concentrations of welding fumes, ozone and CO during the arcing time were 83.55 mg/m3, 0.203 ppm and 0.006%, respectively, at a welding current of 120A-200A. These results suggest serious exposure of a welder who operates in a confined space. Air temperature in the chamber rose remarkably due to the arc heat and the increase in the welding current. No clear decrease in the O2 concentration in the chamber was recognized during this welding operation. A model of air duct ventilation was constructed in the small chamber to investigate the strategy of effective ventilation for hazardous welding contaminants in a confined space. With this model we examined ventilation efficiency with a flow rate of 1.08-1.80 m3/min (ventilation rate for 0.40-0.67 air exchanges per minute) in the chamber, and proved that the exposure level was not drastically reduced during arcing time by this air duct ventilation, but the residual contaminants were rapidly exhausted after the welding operation.

Carbon Dioxide↗

PubMed2002

[Measuring the calibration factor of a light scattering dust monitor for CO2 arc welding fumes].

In Japan, a light scattering type digital dust monitor is most commonly used for dust concentration measurement in a working environment. In this study, the calibration factors of a digital dust monitor (K-factor) for several welding fumes were measured in a laboratory. During the experiment, fumes were generated from CO2 arc welding performed by an automatic welding robot. The examined welding wires were JIS Z 3312, Z 3313, Z 3315, Z 3317 and Z 3320. The mass and relative concentrations of the welding fumes were measured simultaneously by a total/respirable (TR) dust sampler and a digital dust monitor at a welding current of 100 A, 150 A, 200 A, 250 A and 300 A. The particle size distributions of welding fumes were measured by a low pressure impactor at a welding current of 100 A and 300 A. A significant effect of the welding current on the K-factor was recognized for all the examined wires. In the most remarkable case, a four-fold difference in the K-factors was found when the fumes were generated from a flux cored wire for mild steel (JIS Z 3313). The particle size distributions of fumes were also affected by the welding current. The coefficients of variation in the measured K-factor were 7.8-40.5%.

Air Pollutants, Occupational↗

PubMed2004

Tensile strength and elongation of laser-welded Ti and Ti-6AL-7NB.

This study established data demonstrating the possible laser-welded strengths of cast Ti and Ti-6Al-7Nb and compared them to those of two dental-casting alloys. Cast plates of Ti, Ti-6Al-7Nb, gold, and Co-Cr alloy were prepared. After polishing the surfaces to be welded, two plates were abutted and welded using an Nd:YAG laser at a pulse duration of 10 ms, spot diameter of 1 mm, and voltage of 200 V. Five specimens were prepared for each metal by welding either three or five spots unilaterally or bilaterally. The fracture load and percent elongation were measured at a crosshead speed of 1.0 mm/min. The bilaterally welded specimens performed significantly greater than unilaterally welded specimens in both fracture load and elongation whether they were welded with three or five spots per side. The bilaterally welded Ti and Ti-6Al-7Nb specimens were nearly as strong as their corresponding control specimens, whereas the gold and Co-Cr specimens were approximately half as strong. When a large proportion of the cross-sectional area of the joint is laser welded, the strength of the laser-welded portion of the cast Ti and Ti-6Al-7Nb may approach or equal that of the nonwelded metal frameworks.

Alloys↗

PubMed2003

Experimental study on thermal welding for the knee meniscal white zone.

It is difficult to repair tears of the meniscus at the white zone by suturing. We considered that there might be an optimal tissue welding temperature when thermally welding the meniscal white zone, so we conducted a thermal welding experiment using bovine and human menisci. The samples prepared after thermal welding were investigated by measuring the tensile strength, analyzing the histological findings of the welded portion and the meniscal parenchyma, and conducting biochemical analyses. In the experiment using human menisci, histological findings were investigated using transmission electron microscopy (TEM). As the findings on the welded tissue in the white zone of the bovine meniscus indicated positive results at 63 degrees C and 69 degrees C, the experiments using human meniscal white zone were conducted at these two temperatures. The highest tensile strength after thermal welding of the human meniscal white zone was 101.4 +/- 2.6 g/cm(2) at 63 degrees C. Although there were no significant differences in the amount of pyridinoline per unit collagen weight [Pyr/Hpr (%)] in the human meniscus after thermal welding between the control group and various temperature groups (55 degrees C, 63 degrees C, 69 degrees C, 75 degrees C), the amount of pyridinoline per unit of collagen weight tended to decline as the welding temperature increased. According to the TEM findings, the internal structure of the nuclei of the cells was preserved in the 63 degrees C group, whereas cells were denatured inside the nuclei in the 69 degrees C group. They exhibited necrosis, making cell regeneration difficult. Therefore, it seems feasible that thermal welding at 63 degrees C can repair tears in the human meniscal white zone.

Adolescent↗

PubMed2004

Optimization of operator and physical parameters for laser welding of dental materials.

OBJECTIVE: Interactions between lasers and materials are very complex phenomena. The success of laser welding procedures in dental metals depends on the operator's control of many parameters. The aims of this study were to evaluate factors relating to the operator's dexterity and the choice of the welding parameters (power, pulse duration and therefore energy), which are recognized determinants of weld quality. DESIGN: In vitro laboratory study. MATERIALS AND METHODS: FeNiCr dental drawn wires were chosen for these experiments because their properties are well known. Different diameters of wires were laser welded, then tested in tension and compared to the control material as extruded, in order to evaluate the quality of the welding. Scanning electron microscopy of the fractured zone and micrograph observations perpendicular and parallel to the wire axis were also conducted in order to analyse the depth penetration and the quality of the microstructure. Additionally, the micro-hardness (Vickers type) was measured both in the welded and the heat-affected zones and then compared to the non-welded alloy. RESULTS: Adequate combination of energy and pulse duration with the power set in the range between 0.8 to 1 kW appears to improve penetration depth of the laser beam and success of the welding procedure. Operator skill is also an important variable. CONCLUSION: The variation in laser weld quality in dental FeNiCr wires attributable to operator skill can be minimized by optimization of the physical welding parameters.

Chromium Alloys↗

PubMed2005

Effect of stainless steel manual metal arc welding fume on free radical production, DNA damage, and apoptosis induction.

Questions exist concerning the potential carcinogenic effects after welding fume exposure. Welding processes that use stainless steel (SS) materials can produce fumes that may contain metals (e.g., Cr, Ni) known to be carcinogenic to humans. The objective was to determine the effect of in vitro and in vivo welding fume treatment on free radical generation, DNA damage, cytotoxicity and apoptosis induction, all factors possibly involved with the pathogenesis of lung cancer. SS welding fume was collected during manual metal arc welding (MMA). Elemental analysis indicated that the MMA-SS sample was highly soluble in water, and a majority (87%) of the soluble metal was Cr. Using electron spin resonance (ESR), the SS welding fume had the ability to produce the biologically reactive hydroxyl radical (*OH), likely as a result of the reduction of Cr(VI) to Cr(V). In vitro treatment with the MMA-SS sample caused a concentration-dependent increase in DNA damage and lung macrophage death. In addition, a time-dependent increase in the number of apoptotic cells in lung tissue was observed after in vivo treatment with the welding fume. In summary, a soluble MMA-SS welding fume was found to generate reactive oxygen species and cause DNA damage, lung macrophage cytotoxicity and in vivo lung cell apoptosis. These responses have been shown to be involved in various toxicological and carcinogenic processes. The effects observed appear to be related to the soluble component of the MMA-SS sample that is predominately Cr. A more comprehensive in vivo animal study is ongoing in the laboratory that is continuing these experiments to try to elucidate the potential mechanisms that may be involved with welding fume-induced lung disease.

Air Pollutants, Occupational↗

PubMed2005

Fate of manganese associated with the inhalation of welding fumes: potential neurological effects.

Welding fumes are a complex mixture composed of different metals. Most welding fumes contain a small percentage of manganese. There is an emerging concern among occupational health officials about the potential neurological effects associated with the exposure to manganese in welding fumes. Little is known about the fate of manganese that is complexed with other metals in the welding particles after inhalation. Depending on the welding process and the composition of the welding electrode, manganese may be present in different oxidation states and have different solubility properties. These differences may affect the biological responses to manganese after the inhalation of welding fumes. Manganese intoxication and the associated neurological symptoms have been reported in individual cases of welders who have been exposed to high concentrations of manganese-containing welding fumes due to work in poorly ventilated areas. However, the question remains as to whether welders who are exposed to low levels of welding fumes over long periods of time are at risk for the development of neurological diseases. For the most part, questions remain unanswered. There is still paucity of adequate scientific reports on welders who suffered significant neurotoxicity, hence there is a need for well-designed epidemiology studies that combine complete information on the occupational exposure of welders with both behavioral and biochemical endpoints of neurotoxicity.

Animals↗

PubMed2007

Changes in blood manganese concentration and MRI t1 relaxation time during 180 days of stainless steel welding-fume exposure in cynomolgus monkeys.

Welders are at risk of being exposed to high concentrations of welding fumes and developing pneumoconiosis or other welding-fume exposure-related diseases. Among such diseases, manganism resulting from welding-fume exposure remains a controversial issue, as although the movement of manganese into specific brain regions has been established, the similar movement of manganese presented with other metals, such as welding fumes, has not been clearly demonstrated as being similar to that of manganese alone. Meanwhile, the competition between Mn and iron for iron transporters, such as transferrin and DMT-1, to the brain has also been implicated in the welding-fume exposure. Thus, the increased signal intensities in the basal ganglia, including the globus pallidus and subcortical frontal white matter, based on T1-weighted magnetic resonances in welders, require further examination as regards the correspondence with an increased manganese concentration. Accordingly, to investigate the movement of manganese after welding-fume exposure, 6 cynomolgus monkeys were acclimated for 1 mo and assigned to 3 dose groups: unexposed, low dose of (total suspended particulate [TSP] 31 mg/m3, 0.9 mg/m3 of Mn), and high dose of total suspended particulate (62 mg/m3 TSP, 1.95 mg/m3 of Mn). The primates were exposed to manual metal-arc stainless steel (MMA-SS) welding fumes for 2 h/day in an inhalation chamber system equipped with an automatic fume generator for 6 mo. Magnetic resonance imaging (MRI) studies of the basal ganglia were conducted before the initiation of exposure and thereafter every month. During the exposure, the blood chemistry was monitored every 2 wk and the concentrations of metal components in the blood were measured every 2 wk and compared with ambient manganese concentrations. The manganese concentrations in the blood did not show any significant increase until after 2 mo of exposure, and then reached a plateau after 90 days of exposure, showing that an exposure period of at least 60 days was required to build up the blood Mn concentration. Furthermore, as the blood Mn concentration continued to build, a continued decrease in the MRI T1 relaxation time in the basal ganglia was also detected. These data suggested that prolonged inhalation of welding fumes induces a high MRI T1 signal intensity with an elevation of the blood manganese level. The presence of a certain amount of iron or other metals, such as Cr and Ni, in the inhaled welding fumes via inhalation was not found to have a significant effect on the uptake of Mn into the brain or the induction of a high MRI T1 signal intensity.

Air Pollutants, Occupational↗

PubMed2000

Numerical simulations to determine the most appropriate welding and ventilation conditions in small enclosed workspace.

In order to improve arc welding work in a small enclosed workspace, numerical simulations were conducted to find the most appropriate welding and ventilation conditions, such as welding currents, hood position and flow rates with no blowhole formation. In the simulations, distributions of airflow vectors and fume concentrations were calculated for two hood opening positions: one faced a welder's breathing zone, the other a contaminant source. As a result it was predicted that a hood opening facing a breathing zone remarkably lowered the fume concentration in the breathing zone compared with that facing a contaminant source. The reliability was confirmed in CO2 arc welding experiments in the enclosed workspace by using a welding robot. In addition, the number of blowholes in welds, examined with x-ray, decreased with the increase in the welding current and with the decrease in the exhaust flow rate. These results showed that the fume concentration near welder's breathing zone and the number of blowholes could be reduced effectively by appropriate selection of the welding current and hood position, and it was confirmed that the numerical simulations were sufficiently useful to predict these appropriate welding conditions.

Air Movements↗

PubMed2005

Mechanical strength and microstructure of laser-welded Ti-6Al-7Nb alloy castings.

Mechanical properties of laser-welded castings of Ti-6Al-7Nb alloy, CP Ti, and Co-Cr alloy were investigated and compared to the unwelded castings using a tensile test. Dumbbell-shaped specimens were cut at the center, and two halves of the specimens were welded with an Nd:YAG laser welding machine at 220 or 260 V of laser voltage. The mechanical strength of 260 V groups was higher than that of 220 V groups for Ti-6Al-7Nb and Co-Cr alloys except for CP Ti. All 260 V laser-welded castings of Ti-6Al-7Nb alloy and CP Ti, which fractured outside the welded joints, exhibited ductile characteristics, while all laser-welded Co-Cr alloy castings, which fractured within the welded joints, showed brittle characteristics. This study proved that the mechanical strength of laser-welded Ti-6Al-7Nb alloy and CP Ti castings was as high as that of unwelded castings, while the mechanical properties of laser-welded alloy joints were influenced by microstructural changes.

Chromium Alloys↗

PubMed2005

Joint properties of cast Fe-Pt magnetic alloy laser-welded to Co-Cr alloy.

This study investigated the joint properties of Fe-Pt alloy laser-welded to Co-Cr alloy. Cast plates (0.5 x 3.0 x 10 mm) were prepared with Fe-Pt and Co-Cr alloys. Fe-Pt plates were butted against Co-Cr plates and laser-welded using Nd:YAG laser. Control and homogeneously welded specimens were also prepared. Laser welding was performed with and without argon shielding. Tensile testing was conducted, and both fracture force (Ff: N) and elongation (El: %) were recorded. There were no differences in the Ff value between the specimens with and without argon shielding for the welded Fe-Pt/Co-Cr. Lower Ff value of the welded specimen was obtained in the order of Fe-Pt alloy < Fe-Pt/Co-Cr < Co-Cr alloy. The results indicated that Fe-Pt welded to Co-Cr had Ff values between the values of homogeneously welded Fe-Pt and Co-Cr alloys. Argon shielding, on the other hand, had no effect on the weld strength between Fe-Pt and Co-Cr alloys.

Argon↗

PubMed1977

Mutagenicity of fume particles from stainless steel welding.

Welding fume particles collected from different welding procedures were tested for mutagenicity in Escherichia coli, with the inhibition zone in pol A- as compared to pol A+, and in Salmonella typhimurium, TA 100 strain. While no mutagenicity was found with mild steel welding, a mutagenic effect was established with samples from stainless steel welding. This mutagenicity was particularly associated with manual metal arc (MMA) welding, and less so with metal inert-gas welding. A decrease in or an elimination of the effect occurred with a liver microsomal metabolizing system (S-9 mix). The MMA samples produced the strongest mutagenic effect. More-detailed investigations on these samples showed that the mutagenic agent(s) is water soluble. An increased mutagenicity, which also revealed the induction of frame shift mutations, was found with TA 98. The same welding fume sample was used for a mutagenicity test (resistance to 6-thioguanine) with V 79 hamster cells. Because of the high toxicity of these welding fume particles on the cells, only very low concentrations could be tested, but the increase of mutations, when compared to the negative control, was significant. It is suggested that hexavalent chromium may be involved in the mutagenic effect of the welding fumes.

Air Pollutants↗

PubMed2003

Health hazards of welding fumes.

Even in the twenty-first century, welding is still a common and a highly skilled occupation. The hazardous agents associated with welding processes are acetylene, carbon monoxide, oxides of nitrogen, ozone, phosgene, tungsten, arsenic, beryllium, cadmium, chromium, cobalt, copper, iron, lead, manganese, nickel, silver, tin, and zinc. All welding processes involve the potential hazards for inhalation exposures that may lead to acute or chronic respiratory diseases. According to literature described earlier it has been suggested that welding fumes cause the lung function impairment, obstructive and restrictive lung disease, cough, dyspnea, rhinitis, asthma, pneumonitis, pneumoconiosis, carcinoma of the lungs. In addition, welding workers suffer from eye irritation, photokeratitis, cataract, skin irritation, erythema, pterygium, non-melanocytic skin cancer, malignant melanoma, reduced sperm count, motility and infertility. Most of the studies have been attempted previously to evaluate the effects of welding fumes. However, no collectively effort illuminating the general effects of welding fumes on different organs or systems or both in human has not been published. Therefore, the aim of this review is to gather the potential toxic effects of welding fumes documented by individual efforts and provide informations to community on hazards of welding.

Air Pollutants, Occupational↗