SEARCH · PubMed Health

Results for “Phosphorous Acids”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources

PubMed2004

Extraction of arsenic species from spiked soils and standard reference materials.

The abilities of various extractants to recover four arsenic species [As(iii), As(v), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA)] from soils spiked with 20 micro g g(-1) As were investigated. The extractants were water, buffer solutions (citrate and ammonium dihydrogen phosphate), acidic solutions (phosphoric acid and acetic acid), a basic solution (sodium hydroxide) and household chemicals (vinegar and Coca Cola). Gentle shaking at room temperature with each extractant for 24 h gave different recoveries for the different arsenic species. With 0.1 M NaOH solution 46% As(iii), 53% DMA, 100% MMA and 84% As(v) were recovered. A rapid extraction procedure using a sonicator probe has been developed to obtain higher extraction efficiencies. Extracts of arsenic-spiked soil, SRM 2711 Montana soil and SRM 2709 San Joaquin soil were analyzed by HPLC-ICP-MS. In the SRM water extracts, DMA and MMA were identified in addition to inorganic arsenic. The solution detection limits (3s) were 0.1, 0.12, 0.13 and 0.15 ng mL(-1) for As(iii), DMA, MMA and As(v), respectively for HPLC-ICP-MS.

Arsenicals↗

PubMed1970

Detoxications in peripatus. Sulphate, phosphate and histidine conjugations.

Phenols were detoxified in the Onycophoran Peripatoides novaezealandiae by conjugation with sulphuric acid and phosphoric acid, but no evidence for a glycoside detoxication could be found. [(14)C]Benzoic acid was metabolized in 24h to N(2)-benzoyl-l-histidine, which was identified by electrophoresis, chromatography and dilution analysis. Similar conjugates were formed with p-aminobenzoic acid and p-nitrobenzoic acid. In longer-duration experiments further unidentified metabolites were formed, two of which appeared to result from the further metabolism of the histidine conjugate.

Aminobenzoates↗

PubMed2000

Long-term prognosis of crown-fractured permanent incisors. The effect of stage of root development and associated luxation injury.

OBJECTIVES: The aim of the present study was to investigate pulp healing responses following crown fracture with and without pulp exposure as well as with and without associated luxation injury and in relation to stage of root development. PATIENT MATERIAL AND METHODS: The long-term prognosis was examined for 455 permanent teeth with crown fractures, 352 (246 with associated luxation injury) without pulpal involvement and 103 (69 with associated luxation injury) with pulp exposures. Initial treatment for all patients was provided by on-call oral surgeons at the emergency service, University Hospital (Rigshospitalet), Copenhagen. In fractures without pulpal involvement, dentin was covered by a hard-setting calcium hydroxide cement (Dycal), marginal enamel acid-etched (phosphoric acid gel), then covered with a temporary crown and bridge material. In the case of pulp exposure, pulp capping or partial pulpotomy was performed. Thereafter treatment was identical to the first group. Patients were then referred to their own dentist for resin composite restoration. RESULTS: Patients were monitored for normal pulp healing or healing complications for up to 17 years after injury (x = 2.3 years, range 0.2-17.0 years, SD + 2.7). Pulp healing was registered and classified into pulp survival with no radiographic change (PS), pulp canal obliteration (PCO) and pulp necrosis (PN). Healing was related to the following clinical factors: stage of root development at the time of injury, associated damage to the periodontium at time of injury (luxation) and time interval from injury until initial treatment. Crown fractures with or without pulp exposure and no concomitant luxation injury showed PS in 99%, PCO in 1% and PN in 0%. Crown fractures with concomitant luxation showed PS in 70%, PCO in 5% and PN in 25%. An associated damage to the periodontal ligament significantly increased the likelihood of pulp necrosis from 0% to 28% (P < 0.001) in teeth with only enamel and dentin exposure and from 0% to 14% (P < 0.001) in teeth with pulp exposure. CONCLUSIONS: In the case of concomitant luxation injuries, the stage of root development played an important role in the risk of pulp necrosis after crown fracture. However, the primary factor related to pulp healing events after crown fracture appears to be compromised pulp circulation due to concomitant luxation injuries.

Adolescent↗

PubMed2006

Chemical extraction of arsenic from contaminated soil.

A series of batch extraction experiments were conducted using a fortified soil with different extracting solutions such as inorganic acids (hydrochloric acid (HCl), sulfuric acid (H2SO4), phosphoric acid (H3PO4), perchloric acid (HClO4), or nitric acid (HNO3)), organic acids (acetic acid (C2H4O2), citric acid (C6H8O7)) and alkaline agent (NaOH). Various concentrations were used to investigate the removal efficiency and to optimise the concentration of each extractant. In the present investigation a Kuroboku soil contaminated with arsenite (As(III)) was used as a model soil. Arsenic was extracted most efficiently by 5% H3PO4 with a maximum of more than 99% from the model soil. Sulfuric acid also showed high percentage extraction efficiency. On the other hand, C2H4O2 and oxidizing acids such as HNO3 and HClO4 showed low efficiency of As extraction compared with C6H8O7. Although, NaOH also showed higher extraction efficiencies compared with organic and oxidizing acids but mainly arsenate (As(V)) was found to be the major component. A significant fraction of the As(III) was oxidized to As(V) during mineral acid and alkaline extraction and extraction efficiency also varied with the concentration of the acid and alkali solution.

Acids↗

PubMed1980

Effects of ticlopidine on thrombotic obstruction of A-V shunts and on dialysance of artificial kidneys.

Administration of ticlopidine, a new inhibitor of platelet aggregation, during hemodialysis to two patients with thrombotic occlusion of external A-V shunts markedly suppressed the obstruction of the shunt and improved anemia. Consequently, it was concluded that this drug may be useful for maintaining good blood flow and good patency of shunts in patients undergoing dialysis. In order to determine the dialyzer efficiency during dialysis, the reduction rate of the dialyzer was determined in vitro. The dialyzer reduction rates for urea, creatinine, uric acid, and phosphoric acid were all lowered after dialysis, and the administration of ticlopidine resulted in a suppression of the drop in the reduction rate. Based on the inhibitory effect of ticlopidine on platelet aggregation, it was assumed that a close correlation may exist between adhesion and aggregation of platelets and the drop in the efficiency of the dialyzer during dialysis as well as thrombotic obstruction of shunts.

Adult↗

PubMedDate not supplied

[Identification and structural analysis of a glycophospholipid component from the venom of ant Paraponera clavata].

The venom of South American ant Paraponera clavata and its low-molecular-mass fraction were shown to possess insectotoxic and pore-forming activities. A number of glycophospholipid components were isolated from this ant venom by means of gel filtration and reversed-phase chromatography. Some of the compounds cause conductivity fluctuations in lipid bilayer membranes within the ranges 3-25 pS and 200-400 pS at concentrations of 10(-6) to 10(-7) M. N-Acetylglucosamine, a fatty acid, and phosphoric acid residues were found in their structures. A full structure, 3-myristoyl-2-acetamido-2-deoxy-alpha-D-glucopyranosyl phosphate, was elucidated for one of the compounds by the use of 1H, 13C, and 31P NMR spectroscopy and mass spectrometry.

Animals↗

PubMed2005

Synthesis of lipid A and its analogues for investigation of the structural basis for their bioactivity.

As a step to elucidate the structural requirements for the endotoxic and antagonistic activity of lipid A derivatives, we have focused, in the present study, on the effects of the acyl moieties and acidic groups at the 1- and 4'- positions. We synthesized a new analogue corresponding to Rubrivivax gelatinosus lipid A, which has a characteristic symmetrical distribution of acyl groups on the two glucosamine residues with shorter acyl groups (decanoyl groups [C(10)] and lauryl groups [C(12)]) than Escherichia coli lipid A. Carboxymethyl analogues in which one of the phosphates was replaced with a carboxymethyl group were also synthesized with different distribution of acyl groups. Biological tests revealed that the distribution of acyl groups strongly affected the bioactivity. The synthetic Ru. gelatinosus type lipid A showed potent antagonistic activity against LPS, whereas its 1-O-carboxymethyl analogue showed weak endotoxic activity. These results demonstrated that when the lipid A has shorter (C(10), C(12)) hexa-acyl groups, the bioactivity of lipid A is easily affected with small structural difference, such as the difference of acidic group or the distribution of acyl groups, and the bioactivity changes from endotoxic to agonistic or vice versa at this structural boundary for the bioactivity. We also designed, based on molecular mechanics calculations, and synthesized lipid A analogues possessing acidic amino acid residues in place of the non-reducing end phosphorylated glucosamine. Definite switching of the endotoxic or antagonistic activity was also observed depending on the difference of the acidic groups (phosphoric acid or carboxylic acid) in the lipid A analogues.

Endotoxins↗

PubMed1980

Electrokinetic analysis of the fetal erythrocyte membrane after trypsin digestion.

Treatment of intact erythrocytes with trypsin (TRY) produced a significant difference (P less than 0.001) in electrophoretic mobility (EM) of fetal and adult cells. The greater net negative charge of the fetal red blood cells (RBC) at the "new-electrokinetic surface" generated by TRY was further analyzed with cell-electrophoretic measurements combined with various enzymatic and chemical reactions. Formaldehyde or diazonium reaction known to eliminate positive (NH2) groups increased the net negativity of the TRY-digested adult and fetal RBC in the same extent leaving the distance between the EM values unchanged. When the TRY digestion was followed by neuraminidase (NASE) reatment, the decrease in EM of both types of erythrocytes was of the same magnitude, and the distance between the EM values of the TRY-treated fetal and adult RBC remained unchanged, too. Phospholipase-C (PLC) digestion performed after TRY treatment did not cause any change in EM, Either in adult or in fetal RBC. The results show that the greater net negativity of the fetal RBC surface after TRY digestion can be attributed to neither less positive (NH2) groups, nor more sialic acid or phosphoric acid molecules existing at the new electrokinetic surface. It is suggested that the fetal RBC membrane may possess more acidic amino acid exposed to the outside, when TRY liberates sialoglycoprotein from the outer surface of the membrane.

Adult↗

PubMed2000

[Determination of trace bismuth in iron, steel and alloy by hydride generation-atomic fluorimetry].

With the aid of hydride generation-atomic fluorimetry, an analysis method by adding thiosemicarbazide-ascorbic acid and phosphoric acid to eliminate the interference of matrix has been developed for the determination of trace bismuth in iron, steel and alloy. The detection limit is Bi = 0.02 microgram.g-1 (3 sigma, n = 11, sample amount 0.2000 g). The method has been applied to determine trace arsenic in middle and low alloy steel, ferro and nickel-based superalloy, nickel-based superalloy, cobalt-based superalloy, copper alloy with satisfactory results.

English Abstract↗

PubMed2004

[Study on composite contamination of PM2.5 in aerosol of metallurgical plant].

OBJECTIVE: To detect whether there still have PM2.5 compound contamination on the condition of dedust equipment through the study. METHODS: Both qualitative and quantitative analysis on the multiple contaminants and the particle radius of the sample were done by using chemical and electron microscope, electron spectrum, GC-MS, etc. RESULT: The ingredient of the compound contamination: H2O 22%, organics 34.75%, inorganics 43.75%. Main inorganics were Cu, C, Pb, Al, and most of their radius < or = 1.1 microm. There were over 140 kinds of organics, mainly the hydroxybenzene and PAHs. Besides heavy metals such as Pb, As, inorganics also included arsenic acid and phosphoric acid. CONCLUSION: On the existing condition of existing dedust equipment, the compound contamination in aerosol of metallurgical plant were multiple kinds of heavy metals, acidic oxide and tens of kinds of organic contaminations (hydroxybenzene and PAHs), and their radius < or = 1.1 microm.

Dust↗

PubMed2005

Thermophilic anaerobic digester with ultrafilter for solids stabilization.

A thermophilic anaerobic digester with ultrafilter (TADU) for solids separation offers potential advantages of higher VS destruction, biomass retention, and pathogen removal. However, potential disadvantages include ultrafilter fouling, decreasing flux, and high VFA concentrations. In this study, a thermophilic anaerobic digester coupled to a sintered titanium, cross-flow ultrafilter was operated for over five months. Dairy manure was digested (HRT of 23 days). The filtrate VFA concentration was low (220 mg/L as HAc), average VS destruction was 49%, and a low average effluent fecal coliform concentration of 10(2) MPN/100 mL was observed. The low coliform value may be beneficial if dewatered biosolids are used for livestock bedding since low pathogen counts help prevent mastitis. Ultrafilter fluxes of 40-80 L/m2-hr were maintained by cleaning using caustic (3.5% NaOH) followed by water and acid (3% phosphoric acid). Sand from livestock bedding was found to damage the pump and ultrafilter. If TADU were implemented at full scale, then replacing sand bedding with dewatered biosolids should be considered.

Animals↗

PubMed1977

[Acid application on dental tartar as preliminary treatment before mechanical scaling].

The action of the preparation studied, containing 20% hydrochloric acid in an alcohol-chloroform medium: 1) affected both white tartar as well as the submucosal tartar, progressively replacing the phosphorus radicles of tricalcium phosphate by CL ions, transforming the insoluble tricalcium phosphate into soluble calcium chloride; 2) was practically complete in 2 minutes; 3) was more rapid on tartar than on enamel or even cement; 4) did not appear to alter the superficial structure of the tooth in 4 minutes whilst, for the same period of time, the superficial structure of the cement was deeply attacked with 50% preparations of citric acid or phosphoric acid; 5) in our trials, carried out after 4 minutes treatment, caused the tartar to undergo a relatively superficial but adequate chemical action to facilitate its removel, whilst leaving the underlying hard tissue, enamel or cement, unharmed. It would thus appear that such a substance may be used for the preparation and speeding of mechanical descaling.

Calcium Phosphates↗

PubMed1996

The interaction of adhesive systems with human dentin.

PURPOSE: To investigate the interaction of six experimental and commercial bonding systems with dentin in vivo. MATERIALS AND METHODS: One-Step, Clearfil Liner Bond 2, OptiBond, Permagen with 10% phosphoric acid, Permagen with 35% phosphoric acid, and Prime & Bond were applied in standard Class I occlusal cavities in premolars scheduled for extraction for orthodontic reasons, combined either with a self-cured or with a light-cured resin composite. The teeth were carefully extracted 5 minutes after resin polymerization and fixed in 2.5% glutaraldehyde. After fixation, the specimens were dehydrated, sectioned, and processed for field-emission SEM. RESULTS: Although some systems produced gap-free intact interfaces in specific specimens, all of them showed detachment at the transition between the resin-dentin interdiffusion zone and the fluid resin placed over it. It was apparent that the presence of air-bubbles and/or thick layers of polymerized-filled fluid resin resulted in less frequent separation areas at the resin-dentin interface, providing support for the concept of the elastic cavity wall. It was also confirmed that some dentin adhesive systems do not form a thick layer over the dentin, otherwise the resin composite would not have penetrated the dentin tubules.

Adolescent↗

PubMed1997

Evaluation of Scotchbond Multipurpose and maleic acid as alternative methods of bonding orthodontic brackets.

Damage to the enamel surface during bonding and debonding of orthodontic brackets is a clinical concern. Alternative bonding methods that minimize enamel surface damage while maintaining a clinically useful bond strength is an aim of current research. The purpose of this study was to compare the effects on bond strength and bracket failure location of two adhesives (System 1+ and Scotchbond Multipurpose, 3M Dental Products Division) and two enamel conditioners (37% phosphoric acid and 10% maleic acid). Forty-eight freshly extracted human premolars were pumiced and divided into four groups of 12 teeth, and metal orthodontic brackets were attached to the enamel surface by one of four protocols: (1) System 1+ and phosphoric acid, (2) Scotchbond and phosphoric acid, (3) System 1+ and maleic acid, and (4) Scotchbond and maleic acid. After bracket attachment, the teeth were mounted in phenolic rings and stored in deionized water at 37 degrees C for 72 hours. A Zwick universal testing machine (Zwick GmbH & Co.) was used to determine shear bond strengths. The residual adhesive on the enamel surface was evaluated with the Adhesive Remnant Index. The analysis of variance was used to compare the four groups. Significance was predetermined at p < or = 0.05. The results indicated that there were no significant differences in bond strength among the four groups (p = 0.386). The results of the Chi square test, evaluating the residual adhesives on the enamel surfaces, revealed significant differences among the four groups (mean 2 = 0.005). A Duncan multiple range test revealed the difference occurred between the phosphoric acid and maleic acid groups, with maleic acid having bond failures at the enamel-adhesive interface. In conclusion, the use of Scotchbond Multipurpose and/or maleic acid does not significantly effect bond strength, however, the use of maleic acid resulted in an unfavorable bond failure location.

Acid Etching, Dental↗

PubMed2005

Bond strength of a mild self-etch adhesive with and without prior acid-etching.

UNLABELLED: The self-etch approach provides dentists with a generation of user-friendly and less technique-sensitive adhesives. Nevertheless, some concern has been raised regarding their bonding effectiveness to enamel, in particular when so-called 'mild' self-etch adhesives are employed. OBJECTIVES: The purpose of this study was to test the hypothesis that the two-step self-etch adhesive Clearfil SE Bond (C-SE; Kuraray, Osaka, Japan) bonds equally effective to enamel/dentin either with or without prior etching with phosphoric acid. METHODS: Bur-cut enamel/dentin surfaces prepared from human molars were partially split in two halves by cutting a shallow groove. One half was first etched with 40% phosphoric acid (K-etchant), while protecting the other half by holding a razor blade in the groove. Next, C-SE was applied strictly following the manufacturer's instructions, after which the surface was built up using Z100 (3M Espe). After 24-h water storage, micro-specimens were prepared with the interface circularly constricted using a Micro-Specimen Former, prior to micro-tensile bond strength (MPa) measurement. In addition, interfaces of C-SE with enamel/dentin prepared with and without beforehand acid etching were examined by Feg-SEM and TEM. RESULTS: Beforehand etching significantly increased the bonding effectiveness of C-SE to enamel. A clearly more micro-retentive surface was revealed by TEM and Feg-SEM when enamel was etched. Phosphoric-acid etching prior to C-SE application on dentin significantly decreased the muTBS to dentin. TEM provided indications of a low-quality hybrid layer after beforehand phosphoric-acid etching. CONCLUSION: Using C-SE, additional etching with phosphoric acid to improve bonding effectiveness should be limited to enamel.

Acid Etching, Dental↗

PubMed2000

Studies on the dephosphorylation of phosphotyrosine-containing peptides during post-source decay in matrix-assisted laser desorption/ionization.

Phosphorylation of tyrosine residues in proteins is a common regulatory mechanism, although it accounts for less than 1% of the total O-phosphate content in proteins. Whereas aromatic phosphorylation sites can be identified by a number of different analytical techniques, sequence analysis of phosphotyrosine-containing proteins at the low picomole or even femtomole level is still a challenging task. This paper describes the post-source decay in matrix-assisted laser desorption/ionization mass spectrometry of phosphotyrosine-containing model peptides by comparing their fragmentation behavior with sequence-homologous unphosphorylated peptides. Whereas the parent ions showed significant losses of HPO3, all phosphorylated fragment ions of the b- and y-series displayed only minor dephosphorylated signals, which often were not detectable. Surprisingly, one of the studied phosphotyrosine-containing sequences displayed, in addition to the [M + H - 80]+ ion, a more abundant [M + H - 98]+ ion, which could be explained by elimination of phosphoric acid. This dephosphorylation pattern was very similar to the patterns obtained for phosphoserine- and phosphothreonine-containing peptides. Because the dephosphorylation pattern of the parent ion is often used to identify modified amino acids in peptides, we investigated possible dephosphorylation mechanisms in detail. Therefore, we substituted single trifunctional amino acid residues and incorporated deuterated phosphotyrosine residues. After excluding direct elimination of phosphoric acid from tyrosine, we could show that the obtained loss of H3PO4 depends on aspartic acid and arginine residues. Most likely the HPO3 group is transferred to aspartic acid followed by cleavage of phosphoric acid forming a succinimide. On the other hand, arginine appears to induce the H3PO4 loss by protonation of phosphotyrosine leaving a phenyl cation.

Phosphopeptides↗

PubMed2005

Bonding orthodontic brackets to porcelain using different adhesives/enamel conditioners: a comparative study.

AIM: To evaluate the use of new adhesive/primer materials, including an experimental self-etch primer and a cyanocrylate adhesive, to enhance the shear strength of orthodontic brackets bonded to porcelain surfaces. MATERIAL AND METHODS: Sixty porcelain maxillary central incisor teeth were used. The teeth were randomly divided into four groups: group 1, teeth were etched with 37% phosphoric acid and the brackets were bonded with a composite adhesive; group 2, teeth were microetched, hydrofluoric acid and silane applied, and then the brackets were bonded with a composite adhesive; group 3, an acid-etch primer was used, then the brackets were bonded with the same composite adhesive as in the first 2 groups; group 4, teeth were etched with 35% phosphoric acid and the brackets were bonded with the cyanoacrylate adhesive. RESULTS: The analysis of variance comparing the groups tested (F = 9.446) indicated that there was a significant difference between the 4 groups. The cyanoacrylate adhesive had the lowest shear bond strength (mean = 1.7 +/- 2.1 MPa), followed by the conventional bonding using a 37% phosphoric acid etch and composite (mean = 2.1 +/- 1.2 MPa). The use of Transbond after microetching, with the application of hydrofluoric acid and silane, provided the highest shear bond strength (mean = 5.5 +/- 2.7 MPa). Transbond used with the acid etch-primer had a lower bond strength (mean = 3.8 +/- 2.5 MPa), but was not significantly different from the microetch/hydrofluoric acid/silane group. CONCLUSION: The results indicated that the use of a phosphoric acid etch with either a cyanoacrylate or composite adhesive to bond orthodontic brackets to porcelain surfaces produced significantly lower shear bond strength. Self-etch primers produced higher but less consistent shear bond strength for bonding orthodontic brackets. The most reliable bonding procedure to porcelain surfaces is through microetching with the use of hydrofluoric acid and a silane coupler before bonding, but this also produces the greatest damage to the porcelain surface.

Acid Etching, Dental↗

PubMed2006

Hybrid membrane bioreactor for water recycling and phosphorus recovery.

This paper deals with the performance of hybrid membrane bioreactor (MBR) combining the precoagulation/sedimentation and membrane bioreactor. The hybrid MBR not only produces the treated water with excellent permeate quality but also shows much lower membrane fouling than the conventional MBR. It may come from its extremely low F/M ratio to maintain the low viscosity even in the high MLSS concentration range of about 20,000 mg/L. Some results of microbial community analysis in MBRs was conducted to demonstrate the other reason for its lower membrane fouling. Hybrid MBR has a high potential to be used for the recycling use of the municipal wastewater. Coagulated sludge produced in the hybrid MBR is a promising phosphorus resource. This paper also contains a recent progress of phosphorus recovery technology, which uses a new phosphoric acids absorbent, i.e. the hexagonal mesostructured zirconium sulfate (ZS). The ZS has the extremely high adsorption capacity of phosphoric acids through anion exchange. The adsorbed phosphoric acids are released from the ZS in a high pH range of about 13.

Adsorption↗