SEARCH · PubMed Health

Results for “Biocompatibility”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41Linked to original sources

PubMed1999

Surface modification with PEO-containing triblock copolymer for improved biocompatibility: in vitro and ex vivo studies.

Poly(ethylene oxide) (PEO) has been frequently used to modify biomaterial surfaces for improved biocompatibility. We have used PEO-polybutadiene-PEO triblock copolymer to graft PEO to biomaterials by gamma-irradiation for a total radiation dose of 1 Mrad. The molecular weight of PEO in the block copolymer was 5000. In vitro study showed that fibrinogen adsorption to Silastic, polyethylene, and glass was reduced by 70 to approximately 95% by PEO grafting. On the other hand, the reduction of fibrinogen adsorption was only 30% on expanded polytetrafluoroethylene (e-PTFE). In vitro platelet adhesion study showed that almost no platelets could adhere to PEO-coated Silastic, polyethylene, and glass, while numerous platelet aggregates were found on the ePTFE. The platelet adhesion in vitro corresponded to the fibrinogen adsorption. When the PEO-grafted surfaces were tested ex vivo using a series shunt in a canine model, the effect of the grafted PEO was not noticeable. Platelet deposition on ePTFE was reduced by PEO grafting from 8170 +/- 1030 to 5100 +/- 460 platelets 10(-3) microm2, but numerous thrombi were still present on the PEO-grafted surface. The numbers of platelets cumulated on Silastic, polyethylene, and glass were 100 +/- 80, 169 +/- 35, and 24 +/- 22 platelets 10(-3) microm2, respectively. This is about 35% reduction in platelet deposition by PEO grafting. While the numbers of deposited platelets were small, the decreases were not as large as those expected from the in vitro study. This may be due to a number of reasons which have to be clarified in future studies, but it appears that in vitro platelet adhesion and fibrinogen adsorption studies may not be a valuable predictor for the in vivo or ex vivo behavior of the PEO-grafted surfaces.

Adsorption↗

PubMed2005

Layer-by-Layer assembly of TiO2 nanoparticles for stable hydrophilic biocompatible coatings.

Stable, super-hydrophilic (water contact angle approximately equal to 0 degrees) titanium dioxide nanoparticle thin films have been obtained on substrates with different initial wettability such as glass, poly(methyl methacrylate) and poly(dimethyl siloxane) using layer-by-layer nano-assembly method. Titanium dioxide nanoparticles were alternated with poly(styrene sulfonate) to form films of thickness ranging from 11 nm to 220 nm. The hydrophilicity of these thin films increases with increasing number of deposited PSS/TiO2 bilayers. It was found that 2, 5 and 20 layers were needed to form super-hydrophilic TiO2 coating on glass, PMMA and PDMS respectively. Oxygen plasma treatment of substrate surfaces enhanced the formation of homogeneous TiO2 films and accelerated the formation of hydrophilic layers. Super-hydrophilicity has been shown to be unique to PSS/TiO2 films as compared with other polyelectrolyte/nanoparticle layers, and UV irradiation may restore hydrophilicity even after months of storing of the samples. Biocompatibility of TiO2 nanoparticle films has been demonstrated by the successful cell culture of human dermal fibroblast.

Biocompatible Materials↗

PubMed2006

Biocompatibility of materials implanted into the subretinal space of Yucatan pigs.

PURPOSE: To assess the biocompatibility of materials for possible use in subretinal prostheses. METHODS: Strips (0.5 x 5 mm; 10-microm thick) of either plain poly(imide) or poly(imide) coated with amorphous aluminum oxide (AAO), amorphous carbon (AC), parylene, poly(vinyl pyrrolidone) (PVP), or poly(ethylene glycol) (PEG) were each implanted into the subretinal space of four Yucatan miniature pigs. Two types of control surgery without implantation were performed in four other animals. Electroretinograms (ERGs) were performed before and after surgery. All animals were euthanatized 3 months after surgery, and histologic slides of the retina were assessed for 15 criteria. Paired, two-tailed Student's t-tests were used for statistical analyses. RESULTS: Across all animals, the mean amplitude of the ERG b-wave did not differ from baseline after 3 months. In implanted animals, the histologic analyses revealed that (1) all the implanted materials produced abnormalities that were significantly greater than in the control subjects; (2) overall, PEG, parylene, and PVP produced less histologic disruption than the other three materials; (3) parylene and PEG did not differ significantly from the control in disturbing retinal anatomy; (4) only PI and AAO produced RPE alterations that were significantly greater than in control subjects; and (5) AAO and PI produced a significantly greater degree of peri-implant cellular responses than did the other materials. CONCLUSIONS: All implants produced some alteration of the retina, but there were clear differences among the materials in the degree to which their presence disturbed the normal anatomy of the retina or RPE or incited tissue reactions around the implant.

Animals↗

PubMed2006

PCL-PGLA composite tubular scaffold preparation and biocompatibility investigation.

The objective of this paper was to fabricate a biodegradable tubular scaffold for small diameter (d<6 mm) blood vessel tissue engineering. The tube scaffold needed a porous wall for cell attachment, proliferation and tissue regeneration with its degradation. A novel method given in this paper was to coat a porous layer of poly (epsilon-caprolactone) (PCL) on the outside of a poly (glycolic-co-lactic acid) (PGLA with GA:LA=90:10) fiber braided tube to give a PCL-PGLA composite. The PGLA tube was fabricated using a braiding machine by inserting a Teflon tube with the desired diameter in center of the 20 spindles, which are the carriers of PGLA fibers. Changing the diameter of the Teflon tube can vary the inner diameter of a braided PGLA tube. Thermally induced phase separation method was used for PCL solution coating on the surface of the PGLA braided tube. Controlling the polymer concentration, non-solvent addition and quenching temperature generated the pore structures, with pore sizes ranging from 10-30 microm. The fibroblast cells were seeded on the tubular scaffold and cultured in vitro for the biocompatibility investigation. Histology results showed that the fibroblast cells proliferated on the interconnected pore of the PCL porous layer in 1 week.

3T3 Cells↗

PubMed1978

Biocompatible ossicular implants.

Proplast and Plastipore, two new biocompatible implant materials that encourage tissue ingrowth, were used in 225 tympanoplasties. A 12 to 28-month follow-up shows that in 133 tympanoplasties using a drum-to-footplate or total ossicular replacement prosthesis (TORP), there was an average air conduction gain of 19 dB and 65% closure of the air-bone gap to within 20 dB. In 17 tympanoplasties using a drum-to-stapes or partial ossicular replacement prosthesis (PORP), there was an average air conduction gain of 20 dB and 100% closure of the air-bone gap. In 53 tympanoplasties/mastoidectomies using a TORP, there was an average air conduction gain of 19 dB and 87% closure of the air-bone gap. In 22 tympanoplasties mastoidectomies using a PORP, there was an average air conduction gain of 25 dB and 100% closure of the air-bone gap. Five (2.2%) of the 225 Plastipore prostheses have extruded.

Animals↗

PubMed1994

Closure of clival cerebrospinal fluid fistula with biocompatible osteoconductive polymer.

Cerebrospinal fluid fistula into the upper airway often results in meningitis. Closure of fistulas is usually effective using conventional surgical techniques to reconstruct the defect. We report a case of cerebrospinal fluid fistula into the sphenoid sinus and nasopharynx secondary to resection of a clivus chordoma that resisted conventional attempts at closure, including a rectus abdominus free flap. Closure of the fistula was accomplished with the use of a novel alloplast, biocompatible osteoconductive polymer. Follow-up for more than 1 year shows no evidence of rejection, infection, or recurrent cerebrospinal fluid rhinorrhea.

Adult↗

PubMed1998

Biocompatibility of polyurethane-coated stents: tissue and vascular aspects.

To assess the arterial injury triggered by polyurethane-coated vs. uncoated stents, six polyurethane-coated and six bare nitinol stents were implanted in rabbit carotid arteries. All animals were sacrificed 4 wk after stent placement. Sections were evaluated by histology and morphometric analysis. At 4 wk, both the coated and uncoated stent struts were entirely endothelialized. The spaces between the struts showed a relatively mild proliferative response, with a few sections demonstrating neovascularization around the struts. Polyurethane coating was associated with an inflammatory tissue response consisting of lymphocytic infiltration and foreign-body reaction, with the appearance of multinucleated giant cells. Lumen, intimal, and medial cross-sectional areas varied little between coated and uncoated stented vessels (2.45+/-0.19 vs. 2.47+/-0.47 mm2, 1.17+/-0.52 vs. 0.78+/-0.30 mm2, and 0.66+/-0.18 vs. 0.58+/-0.27 mm2, respectively). In the rabbit carotid artery model, polyurethane coating does not affect the degree of neointimal proliferation after endovascular stenting compared with the conventional stenting approach. However, the inflammatory tissue response may indicate a low intrinsic biocompatibility of this stable polymer, so that it may not be an ideal material for coating intravascular devices.

Animals↗

PubMed1996

Biocompatible coatings for luminal and outer surfaces of small-caliber artificial grafts.

Luminal and outer surfaces of small-caliber vascular grafts at an early implantation period may require completely opposite cellular responses: minimal cellular adhesion and fibrin formation for a luminal surface versus potent cellular adhesion and migration and matrix generation for an outer surface. Differentiated biocompatible design of luminal and outer surfaces into small-caliber artificial grafts may lead to successful healing. We molecularly designed photocurable extracellular matrices (ECMs): photocurable chondroitin sulfate (CS) and hyaluronic acid (HA) for the luminal surface coating and photocurable gelatin for the outer surface coating. All of them were partially derivatized with photodimerizable groups such as thymine, cinnamate, and coumarin groups and converted to produce water-insoluble gels upon ultraviolet irradiation. In vitro study showed that platelet adhesion on photogelled CS and HA was significantly reduced, whereas endothelial cells adhered well on photogelled gelatin. These materials were individually coated and photogelled onto respective surfaces of artificial grafts (inner diameter [ID], 5 mm). During acute-phase implantation into dogs for up to 1 week, minimal cell adhesion was observed on the luminal surface, which was uniformly covered by photogelled CS or HA. Heparin impregnation of photocured ECM reduced fibrin formation. On the other hand, enhanced tissue ingrowth was noted at the outer surface. Although these ECM-coated grafts need further improvement in molecular design and coating techniques, photocurable ECMs may contribute to successful healing and a high patency rate of small-caliber artificial grafts.

Animals↗

PubMed1997

In vivo biocompatibility and biostability of modified polyurethanes.

Modified segmented polyurethanes were examined for biostability and biocompatibility using an in vivo cage implant system for time intervals of 1, 2, 3, 5, and 10 weeks. Two types of materials were used: polyether polyurethanes and polycarbonate polyurethanes. Two unmodified polyether polyurethanes (PEUU A' and SPU-PRM), one PDMS endcapped polyether polyurethane (SPU-S), and two polycarbonate polyurethanes (SPU-PCU and SPU-C) were investigated in this study. Techniques used to characterize untreated materials were dynamic water contact angle, stress-strain analysis, and gel permeation chromatography. Cellular response was measured by exudate analysis and by macrophage and foreign body giant cell (FBGC) densities. Material characterization, postimplantation, was done by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) in order to quantify biodegradation and scanning electron microscopy (SEM) to qualitatively describe the cellular response and biodegradation. The exudate analysis showed that the acute and chronic inflammatory responses for all materials were similar. Lower FBGC densities and cell coverage on SPU-S were attributed to the hydrophobic surface provided by the PDMS endgroups. The polycarbonate polyurethanes did not show any significant differences in cell coverage or FBGC densities even though the macrophage densities were slightly lower compared to polyether polyurethanes. By 10 weeks, biodegradation in the case of PEUU A' and SPU-PRM was extensive as compared to SPU-S because the PDMS endcaps of SPU-S provided a shield against the oxygen radicals secreted by macrophages and FBGCs and lowered the rate of biodegradation. In the case of polycarbonate polyurethanes, the oxidative stability of the carbonate linkage lowered the rate of biodegradation tremendously as compared to the polyether polyurethanes (including SPU-S). The minor amount of biodegradation seen in polycarbonate polyurethanes at 10 weeks was attributed to hydrolysis of the carbonate linkage.

Animals↗

PubMed1998

First use of cultured human urothelial cells for biocompatibility assessment: application to urinary catheters.

For several years, studies performed to estimate in vitro biocompatibility of urinary catheters have been carried out using permanent cell lines. But for a rational design of the testing procedure, the cell culture model should relate to the material application. This work presents the results of a probe study designed to obtain an in vitro model of normal human urothelial cells (HUC) and to test the relevance of this system in cytocompatibility experiments of urinary catheters currently used.A comparison is made with continuous cell lines, the use of which is recommended by normalization bodies. We exposed monolayers of HUC (well characterized for their proliferation, qualitative evaluation, and quantitative measurement of cytokeratins) and two continuous human cell lines to liquid extracts (either pure or diluted in the culture medium) of nine available catheters, including positive (latex) and negative controls, for a 24 h incubation. Then colorimetric assays (Neutral Red and MTT) were performed. The extracts of two polyurethanes provoked a significant toxic effect on HUC only, suggesting differences in sensitivity between the models used. This effect could be due to the presence of a great amount of barium (used as a radioopacifier) in extracts, as highlighted by results of absorption emission spectroscopy. A culture model of HUC may be of relevance for the screening of materials intended for urological practice.

Biocompatible Materials↗

PubMed1998

Studies on segmented polyetherurethane for biomedical application: effects of composition and hard-segment content on biocompatibility.

Segmented polyetherurethane (SPEU) materials based on polytetramethylene oxide (PTMO, Mw 1000 and 2000) with various hard-segment contents were synthesized and their biocompatibilities studied via different tests. The static contact angle data reveal that the higher hard-segment-content SPEU material possesses a lower contact angle, implying that the surface of the higher hard-segment-content SPEU is more hydrophilic than its low hard-segment-content SPEU counterpart. The catalyst- and additive-free PTMO-based SPEU materials in this study possess neither a hemolytic nor a cytotoxic response that could be considered non toxic for biomedical applications. By using L-929 cell lines, a cell-seeding test indicated that the higher hard-segment-content SPEU material possesses quicker cell attachment and proliferation behaviors. In vitro platelet adhesion tests indicated that the lower hard-segment-content SPEU possesses less platelet adhesion than the high hard-segment-content SPEU material. Both ex vivo canine artery-artery (A-A) and arterio-venous (A-V) shunting tests revealed that the extent of platelet adhesion reaction is less for lower hard-segment content SPEU. In addition, the blood compatibility of SPEU material synthesized from PTMO 1000 excels over PTMO 2000 SPEU material by near the same levels as the hard-segment-content SPEU.

Animals↗

PubMed1998

Biodegradation and biocompatibility of a guided tissue regeneration barrier membrane formed from a liquid polymer material.

Biodegradable barrier films were made by coagulating a solution of poly(DL-lactide) in N-methyl-2-pyrrolidone on porous polyethylene pads wetted with saline solution. The semisolid films were cut into 10 x 10 mm barriers and implanted subcutaneously in rabbits. At monthly intervals, the polymer implant sites were compared histologically to those implanted with USP negative control plastic. The polymer films were retrieved from the surrounding tissue, dried, weighed, and the changes in molecular weight determined using gel permeation chromatography. The molecular weight of the polymer decreased at a relatively constant rate over 5 months; however, no significant mass loss occurred until 5 months postimplantation. Also, no distinct histological differences were noted between the polymer barrier and the control plastic sites until 6 months when histiocytes and multinucleated giant cells showed a modest increase around fragmented polymer films. Similar barrier films also were fitted over naturally occurring buccal dehiscence defects in beagle dogs and the tissue sites compared histologically at 6 months to sham-operated control sites. New bone and dense connective tissues closely approximated segments of the remaining polymer and demonstrated the biocompatibility of the biodegradable films. Histomorphometric analyses of treated sites compared to sham controls showed that the polymer barrier is effective in promoting bone and cementum regeneration in periodontal defects in dogs.

Animals↗

PubMed1999

In vivo biocompatibility and mechanical study of novel bone-bioactive materials for prosthetic implantation.

Two epoxy materials with or without adhesively bonded hydroxyapatite (HA) coatings were studied for their biocompatibility and mechanical pushout strength using in vivo implantation in the rabbit lower femur for a duration of 10 days to 6 months. Both were two-part epoxies cured at room temperature for 24 h, with material 1 (Ampreg 26; SP Systems Limited, Cowes, UK) postcured at 110 degrees C (Tg approximately 80 degrees C) and Material 2 (CG5052; Ciba Geigy Limited, Cambridge, UK) at 125 degrees C (Tg approximately 120 degrees C). Implantation in dead rabbit bone was performed to provide mechanical baseline levels. Polymethylmethacrylate (PMMA) and conventionally HA-coated titanium alloy (Ti-6Al-4V) were used as control materials. In the biological study, different fluorescent dyes were used to label newly formed bone. After 6 weeks of implantation, results from mechanical pushout tests showed that the interfacial shear strength (ISS) values were significantly higher than for dead bones with each of the different implants (p < .01-.001). HA-coated material 2 showed a significantly higher ISS value than the uncoated material (p < .05) after 6 weeks' implantation. However, the ISS value for the uncoated material 2 was significantly higher than for PMMA controls (p < .05). No significant differences in the ISS values were shown between HA-coated materials 1 and 2 and Ti-6Al-4V on in vivo implantation for 6 weeks. Failure points of the pushout test from the three HA-coated materials were defined by scanning electron microscopy. Specimens implanted with both HA-coated epoxies were fractured within the HA-coatings or the bone, while with HA-coated Ti-6Al-4V cracked between the coating and metal implant. The percentage of bone in contact with the implant surface was obtained by image analysis which showed that there were no significant differences between different materials after short time implantation (up to 6 week). Long-term implantation of the HA-coated material 2 showed that the percentage of bone contact had increased from 52.8+/-1.1% (6 week) to 80.0+/-0.3% (3 months) (p < .01) and remained at 81.0+/-0.8% (6 months). Measurements of bone mineralization rate (BMR) showed that after 3 weeks of implantation, there were no significant differences between PMMA and uncoated materials 1 and 2. After 6 weeks, the BMRs in animals implanted with either HA-coated material 1 or 2 were significantly higher than with HA-coated Ti-6Al-4V (p < .05-.0001 in both cases), but with HA-coated material 2 was lower than with this material uncoated (p < .05-.001). No significant differences were found between the two HA-coated epoxy materials. In addition, there were always lower BMRs during the third week of implantation than other periods regardless of biomaterial implanted. The study indicated that the adhesively bonded HA-coated novel epoxy materials were superior to conventional plasma-sprayed Ti-6Al-4V implants with respect to both BMR and bone integration with the implant surfaces. Adhesively bonded HA-coated epoxy materials had similar ISS values to HA-coated Ti-6Al-4V, but the former failed within the bone and coating, while the latter showed splitting between coating and metal.

Algorithms↗

PubMed1999

Sulbactam-cefoperazone polyhydroxybutyrate-co-hydroxyvalerate (PHBV) local antibiotic delivery system: in vivo effectiveness and biocompatibility in the treatment of implant-related experimental osteomyelitis.

In this study, a novel antibiotic carrier system for use in the treatment of implant-related and chronic osteomyelitis was developed. Sulbactam-cefoperazone was introduced to rods of polyhydroxybutyrate-co-hydroxyvalerate (22 mol % HV, w/w), a member of a family of microbial-origin polymer that is biodegradable, biocompatible, and osteoconductive due to its piezoelectric property. The antibiotic-loaded carrier was implanted into the infection site that was induced by Staphylococcus aureus inoculation into the rabbit tibia. The effectiveness of this was assessed macroscopically, radiographically, bacteriologically, and histopathologically. Findings of infection subsided on day 15 and almost complete remission was observed on day 30. The control side that contained antibiotic-free rods, however, worsened. These findings prompted us to conclude that the novel biodegradable antibiotic carrier developed in the present study seems to be a promising candidate for use in the treatment of severe bone infection.

Animals↗

PubMed1999

In vivo biocompatibility evaluation of Cibacron blue-agarose.

This study investigated the biocompatibility of Cibacron blue-agarose as a biomaterial for microencapsulation. Cibacron blue-agarose is known to have an affinity for albumin under certain pH conditions and in the proper steric environment. Thus it was postulated that the material's high affinity for host albumin might reduce a secondary immune response and reduce the fibrotic overgrowth that often accompanies transplanted foreign materials. In vivo tests were performed using the Lewis rat model. Both Cibacron blue-agarose and plain agarose disks were prepared, with some disks from each group being pre-exposed to sera from Lewis rats. The disks were transplanted into the peritoneal cavities of Lewis rats. After 115 days the disks were excised. Fibrotic overgrowth was analyzed using light microscopy, and a blind study was used to measure the average growth thickness on each disk. The results demonstrated that all disks developed some fibrotic encapsulation and that the presence of Cibacron blue was not significant in reducing fibrotic overgrowth (p = 0.62). Agarose disks pre-exposed to sera had significantly less average overgrowth than any other group (p = 0. 06).

Animals↗

PubMed2000

Ion chromatographic determination of metals in biocompatibility testing.

The increasing numbers of materials used in surgical implants require a wide spectrum of tests to evaluate their biocompatibility. The release of metals is an important additional feature for determining the suitability for clinical applications of biomaterials such as ceramics and metals. Due to the difficulty of performing time-consuming experiments in vivo, one approach for rapidly determining the suitability of biomaterials and their interactions with the tissues with which they will come in contact is to perform in vitro tests, based on cell culture analysis, using solutions that reproduce the cleavage and binding capabilities of body fluids and tissues. The present work reports on the application of ion chromatography to the simultaneous determination of some metal ions in a few biologic media. Agar-Agar solution, "199 medium, " and betadine and Schiff's reagents were selected as some of the most representative biologic simulating solutions. A method is recommended for the pretreatment of the sample with minimal reagent addition since it is very rich in organic compounds and cannot be analyzed without pretreatment. The proposed procedure requires the sample to be subjected to oxidative UV photolysis for about 60 min in an UV digester at 85 degrees +/- 5 degrees C, followed by the ion chromatographic determination. Lead (II), cadmium (II), iron (III), copper (II), nickel (II), zinc (II), and cobalt (II) simultaneously were determined at microg/L levels.

Biocompatible Materials↗

PubMed2000

In vivo biocompatibility of dextran-based hydrogels.

Dextran-based hydrogels were obtained by polymerization of aqueous solutions of methacrylated dextran (dex-MA) or lactate-hydroxyethyl methacrylate-derivatized dextran (dex-lactate-HEMA). Both nondegradable dex-MA and degradable dex-lactate-HEMA disk-shaped hydrogels, varying in initial water content and degree of substitution (DS, the number of methacrylate groups per 100 glucose units), were implanted subcutaneously in rats. The tissue reaction was evaluated over a period of 6 weeks. The initial foreign-body reaction to the dex-MA hydrogels was characterized by infiltration of granulocytes and macrophages and the formation of fibrin, and exudate, as well as new blood vessels. This reaction depended on the initial water content as well as on the DS of the hydrogel and decreased within 10 days. The mildest tissue response was observed for the gel with the highest water content and intermediate DS. At day 21 all dex-MA hydrogels were surrounded by a fibrous capsule and no toxic effects on the surrounding tissue were found. No signs of degradation were observed. The initial foreign-body reaction to the degradable dex-lactate-HEMA hydrogels was less severe compared with the dex-MA gels. In general, the size of the dex-lactate-HEMA hydrogels increased progressively with time and finally the gels completely dissolved. Degradation of the dex-lactate-HEMA hydrogels was associated with infiltration of macrophages and the formation of giant cells, both of which phagocytosed pieces of the hydrogel. A good correlation between the in vitro and the in vivo degradation time was found. This suggests that extra-cellular degradation is not caused by enzymes but depends only on hydrolysis of the ester and/or carbonate bonds present in the crosslinks of the hydrogels. After 21 days, the degradable hydrogels, as such, could not be retrieved, but accumulation of macrophages and giant cells was observed, both of which contained particles of the gels intracellularly. As for the dex-MA hydrogels, no toxic effects on the surrounding tissue were found. The results presented in this study demonstrate that dextran-based hydrogels can be considered as biocompatible materials, making these hydrogels attractive systems for drug delivery purposes.

Animals↗

PubMed2000

Modulating the biocompatibility of polymer surfaces with poly(ethylene glycol): effect of fibronectin.

A novel approach described earlier for improving polymer substratum biocompatibility(1) is further elucidated. Polysulfone (PSf) spin-coating films were modified by covalent end-on grafting of hydrophilic and sterically demanding photo-reactive poly(ethylene glycol) (PEG) conjugates (ABMPEG; 10 kDa). The degree of grafting density was varied systematically, yielding a wide spectrum of attained surface characteristics monitored by air-water contact angles (captive bubble method). Fibronectin (FN) adsorption was studied by in situ ellipsometry and found to decrease monotonically as ABMPEG grafting density increased. The adhesive interaction of human skin fibroblasts with these substrata and, in particular, the effect of FN precoating were investigated in detail. A clear optimum of cell-substratum interactions was found for mildly modified substrata, employing well established microscopic and immunofluorescence techniques, namely the monitoring of cell adhesion and spreading, overall cell morphology, organization of FN receptors, and focal adhesions as well as FN matrix formation. The results suggest that cell interactions with hydrophobic polymer substrata are enhanced considerably when modified with hydrophilic and sterically demanding PEG moieties at a low surface coverage due to enhanced biologic activity of adsorbed and intercalated adhesive proteins such as FN.

Biocompatible Materials↗