SEARCH · PubMed Health

Results for “surface modification”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41Linked to original sources

PubMed2006

[Adsorption of p-nitrophenol by nanosized titanium dioxide surface modified with 3,5-dinitrosalicylic acid].

Nanometer size titanium dioxide modified with 3,5-dinitrosalicylic acid (3,5-DA) was prepared using chemical adsorption method. The influences of surface modification on the adsorption of p-nitrophenol (PNP) and the dispersion in solvent such as water, benzene and ethanol were studied. The 3,5-dinitrosalicylic acid is bonded to the surface hydroxyl from TiO2 nanoparticles, results in the formation of a stable, six-ring complex which color is buff. The 3, 5-DA-modified TiO2 nanoparticles have good dispersive capacity in water, benzene and ethanol. Under the optimum conditions such as pH value 3, adsorption time 10 min, the adsorption ratio of PNP by TiO2 is improved from 43% to 99.9% through surface modification. A new method could be used to remove directly 3 approximately 10mg/L PNP, and the residual concentrations is below the integrated wastewater discharge standard (GB 8978-1996).

Adsorption↗

PubMed2006

[A cross sectional study of titanium plates surface-treated with anodic oxidation].

It is an important modern trend to try to modify the surface properties of titanium implants with titanium oxide produced in various ways. One possibility of surface modification is the formation of an oxide layer by heat and electric treatment. The authors examined three osteosynthesis plates treated with anodic oxidation of Hungarian development. 5-10 microm thick slides were made of the plates in several cross sectional planes with a special cutting-grinding technique and were examined under a microscope with various magnifications. In the study it was seen that the surface of the basic metal was covered with a continuous oxide layer in all the cross sectional planes. No material faults were discovered on the surface. The thickness of the surface layer in various regions was found to be changing in the nm range, which coincides with the results of other studies. It was proven in the study by using the surface modification technique in part developed by the authors a passivating layer was formed on the surface of titanium, which separates it from the human organism.

Biocompatible Materials↗

PubMed2005

Experimental and computational studies of trialkylaluminum and alkylaluminum chloride reactions with silica.

Reactions of trimethylaluminum, triethylaluminum, and diethylaluminum chloride and ethylaluminum dichloride with silica gel have been studied experimentally by infrared spectroscopy and elemental analysis. The silica gel was subjected to different pretreatments to alter surface functionalities prior to reaction. In all cases the extent of surface modification reaction follows the trend unmodified > 600 degrees C pretreated > hexamethyldisilazane (HMDZ) pretreated > 600 degrees C/HMDZ pretreated. All of the aluminum compounds studied completely react non-hydrogen-bonded silanols, while also reacting with hydrogen-bonded silanols and siloxanes. Primarily monomeric surface species result from the surface modification reaction. Ethylaluminum chlorides preferentially react with silanols through cleavage of the Al-C bond rather than the Al-Cl bond. Singly bonded Si(s)-O-AlCl(2) surface species are readily synthesized by reaction of ethylaluminum dichloride with HMDZ-pretreated silica gel. Bridged bonded (Si(s)-O)(2)-AlCl surface species are readily synthesized by reaction of diethylaluminum chloride with HMDZ-pretreated silica gel. Computational ab initio studies of the cluster Si(4)O(6)(OH)(4) as a model to study the reaction of monomeric and dimeric methylaluminum dichloride with a silica silanol are also described. Comparison of the potential energy surface (PES) of monomer and dimer indicates that the energetics favor monomer reaction, consistent with experimental results. The energy cost in the dimer reaction is primarily from cleavage of a bridged Al-Cl bond upon adsorption. This does not occur when the monomer adsorbs. A comparison of the PES for the two reaction pathways resulting from cleavage of either an Al-Cl or Al-C bond indicates that while the former reaction is slightly kinetically favored (E(a) = 23.1 kJ/mol for Al-Cl bond cleavage versus E(a) = 31.1 kJ/mol for Al-C bond cleavage), the latter is strongly thermodynamically favored with an overall free energy difference between the two reaction pathways of 135 kJ/mol favorable to Al-C bond cleavage. These reactions are thermodynamically controlled.

Journal Article↗

PubMed1998

Stability of plasma-polymerized allylamine films with sterilization by autoclaving.

The stability of plasma-polymerized allylamine films with autoclaving sterilization cycles was investigated. Polymerized films were deposited under pulsed plasma conditions using two different duty cycles to provide surfaces having different initial amino group concentrations. The film properties were analyzed by XPS and water contact angle measurements before and after autoclaving. The reactions of these surfaces with trifluoroacetic anhydride provided quantitation of the amino surface concentrations before and after autoclaving. In general, the plasma-polymerized films exhibit good stability vis à vis the autoclaving process, with relatively high retention of the surface amino groups. The results of this work are of specific value with respect to tissue culture studies in which surface modifications involving the introduction of amino groups have been shown to have high efficacy in promoting cell growth. The results obtained suggest that the simple one-step plasma treatment process is a viable alternative to the more cumbersome surface modification procedures currently employed to introduce amino groups in these tissue culture studies.

Acetic Anhydrides↗

PubMed2004

Microfluidic routing of aqueous and organic flows at high pressures: fabrication and characterization of integrated polymer microvalve elements.

This paper presents the first systematic engineering study of the impact of chemical formulation and surface functionalization on the performace of free-standing microfluidic polymer elements used for high-pressure fluid control in glass microsystems. System design, chemical wet-etch processes, and laser-induced polymerization techniques are described, and parametric studies illustrate the effects of polymer formulation, glass surface modification, and geometric constraints on system performance parameters. In particular, this study shows that highly crosslinked and fluorinated polymers can overcome deficiencies in previously-reported microvalve architectures, particularly limited solvent compatibility. Substrate surface modification is shown effective in reducing the friction of the polymer-glass interface and thereby facilitating valve actuation. A microchip one-way valve constructed using this architecture shows a 2 x 10(8) ratio of forward and backward flow rates at 7 MPa. This valve architecture is integrated on chip with minimal dead volumes (70 pl), and should be applicable to systems (including chromatography and chemical synthesis devices) requiring high pressures and solvents of varying polarity.

Journal Article↗

PubMed2003

Covalent bonding of lysine to EVAL membrane surface to improve survival of cultured cerebellar granule neurons.

Polylysine is a commonly used coating material in the preparation of neuronal cultures. In the present study, poly (ethylene-co-vinyl alcohol) (EVAL) membranes were modified by the covalent bonding of lysine via isocyanation of surface hydroxyl groups to improve cell behavior in cultured cerebellar granule neurons from 7-day-old Wistar rats. Cell survival and death ratio were assayed by MTT reduction activity and lactate dehydrogenase release, respectively. Cell morphology and neurite growth were observed by a scanning electron microscope. It was found that immobilizing lysine onto the EVAL membranes could improve neuronal MTT reduction activity and delay the death rate of neurons. In addition, neurons seeded on the lysine-immobilized EVAL membrane were able to regenerate with the formation of an extensive neuritic network, indicating that the surface modification on the EVAL membrane should be useful for culturing of neurons. Furthermore, the influence exerted by the modification of different amino acids (glycine, arginine and ornithine) onto the EVAL membranes on the neuronal behavior were investigated. We found that the effect of the terminal primary amine of the side chain of the basic amino acids on the neuronal behavior should be taken into account because the immobilized glycine molecules did not improve neuronal cultures. In order to interpret the phenomenon further, in the surface modification process, both the two amino groups of lysine were designed to react with the EVAL membrane surface to form a cyclic structure. On such a surface, neuronal MTT reduction activity was decreased and neuronal death was not delayed. The result shows that the lysine molecules immobilized on the EVAL membrane surface can mediate cellular response to promote neuronal cell survival and guidance of neuritic processes, indicating a delicate interaction of neuron with lysine molecules on the EVAL membrane surface.

Animals↗

PubMed2003

In vitro biocompatibility assessment of sulfonated polyrotaxane-immobilized polyurethane surfaces.

Sulfonated polyrotaxanes (PRx-SO(3)'s), in which sulfonated alpha-cyclodextrins (alpha-CDs) were threaded onto the poly(ethylene glycol) (PEG) segments in a PEG-b-poly(propylene glycol) (PPG)-b-PEG triblock copolymer (Pluronic) capped with benzyloxycarbonyl (Z)-L-phenylalanine (Z-L-Phe), were prepared as a novel surface-modifying biomaterial. Surface modification of the polyurethane (PU) was carried out by blending the PRx-SO(3)'s with a PU solution, followed by solution casting. The incorporated PRx-SO(3)'s led to the enhanced hydrophilicity by changing the surface properties of the PU matrix. Modified PUs showed the stable entrapment of the PRx-SO(3)'s with little extraction into water and enhanced mechanical properties after exposure to water compared to the PU control. The incorporated PRx-SO(3)'s repelled the proteins and kept them from closely approaching the surface areas, prevented platelet activation by thrombin, and effectively repelled bacteria. These results suggest that both the supramolecular structure of the polyrotaxanes and exposure of the sulfonated groups onto the surfaces contribute to these phenomena. Thus, surface modification with PRx-SO(3)'s is suggested to be useful for the fabrication of biocompatible medical devices.

Biocompatible Materials↗

PubMed1999

Photoimmobilisation of poly(N-vinylpyrrolidinone) as a means to improve haemocompatibility of polyurethane biomaterials.

A novel method to improve the haemocompatibility of polymeric biomaterials (in particular: polyurethane elastomers) is reported. The new approach essentially rests upon photochemical immobilisation of the highly biocompatible polymer poly(N-vinylpyrrolidinone) (poly(NVP)) onto the biomaterial's surface. One of the key steps in the surface modification procedure is the preparation of a copolymer of NVP and the photoreactive building block 4-[4'-azidobenzoyl]-oxo-n-butylmethacrylate (1). This copolymer is first dissolved in a volatile solvent, then sprayed onto the biomaterial's surface, and subsequently immobilised via irradiation with ultraviolet light. The paper describes: (i) preparation of 1, (ii) preparation of the copolymer (NVP + 1), (iii) physico-chemical characterisation of the modified surfaces, and (iv) results of two in vitro haemocompatibility assays (i.e. thrombin generation and adhesion of blood platelets from recalcified human platelet-rich plasma). Furthermore, the surface modification was performed with a microporous polyurethane vascular graft (Chronoflex), which is already in clinical use. The in vitro experiments revealed that significant improvement of the haemocompatibility of polyurethanes can be achieved through this method.

Biocompatible Materials↗

PubMed2006

Two-dimensional patterning of thin coatings for the control of tissue outgrowth.

Control of the precise location and extent of cellular attachment and proliferation, and of tissue outgrowth is important in a number of biomedical applications, including biomaterials and tissue engineered medical devices. Here we describe a method to control and direct the location and define boundaries of tissue growth on surfaces in two dimensions. The method relies on the generation of a spatially defined surface chemistry comprising protein adsorbing and non-adsorbing areas that allow control over the adsorption of cell-adhesive glycoproteins. Surface modification was carried out by deposition of thin acetaldehyde and allylamine plasma polymer coatings on silicon wafer and FEP substrates, followed by grafting of a protein resistant layer of poly(ethylene oxide). Spatially controlled patterning of the surface chemistry was achieved by masking during plasma polymerization. XPS and AFM were used to provide evidence of successful surface modifications. Adsorption of the extracellular matrix protein collagen I followed by tissue outgrowth experiments with bovine corneal epithelial tissue for up to 21 days showed that two-dimensional control over tissue outgrowth is achievable with our patterning method over extended time frames. The method promises to be an effective tool for use in a number of in vitro and in vivo applications.

Adsorption↗

PubMed2006

Preparation and characterization of biocompatible polyelectrolyte complex multilayer of hyaluronic acid and poly-L-lysine.

A novel biocompatible polyelectrolyte complex multilayer (PECML) was successfully prepared using hyaluronic acid (HA) and poly-l-lysine (PLL). The formation of PECML through the electrostatic interaction of HA as a polyanion and PLL as a polycation was confirmed by contact angle measurement, ESCA analysis and HA content analysis. According to the Carbazole assay, HA content increased rapidly up to eight cycles for HA/PLL deposition and then slightly increased with an increasing number of deposition cycle. In vitro release of PLL from the PECML continued up to 4 days exhibiting different release profiles depending on the outer layer of PECML. This result provides evidence for PLL diffusion throughout PECML of HA and PLL during the multilayer buildup. About 25% of HA remained on the cover glass after the in vitro release test for 7 days. From the results, we confirmed that PECML of HA and PLL could remain at least partially on the chitosan-coated cover glass for 7 days. The surface modification with PECML resulted in drastically reduced peripheral blood mononuclear cell (PBMC) attachment according to the lactate dehydrogenase assay for cell counting. This nano-scale control of material deposition may be successfully applied for surface modification of various biomaterials.

Cell Adhesion↗

PubMed1998

Development of a surface modified silicone-keratoprosthesis with scleral fixation.

BACKGROUND: Many attempts have been made to create artificial corneas. The keratoprostheses currently available do not allow measurements of the intraocular pressure (IOP) and restrict the visual field. The main problem is extrusion due to an insufficient connection between implant and surrounding tissue. It is our aim to create a flexible keratoprosthesis with a wide field optic allowing measurements of the IOP. Surface modification will improve cell adhesion and therefore stability between implant and tissue. METHODS: The keratoprosthesis is made of silicone rubber. The optical zone is 11 mm in diameter with a thickness of 0.3 mm. The surface modified haptic consists of a scleral rim and 8 branches for scleral fixation. Optical and mechanical qualities were tested by tensile tests, spectrophotometry and topography. RESULTS: A method to produce one-piece silicone keratoprostheses was established. Submicron lathing of the mould led to an excellent optical quality. Spectrophotometry showed high degree of visible and ultraviolet light transmission of the silicone. Mechanical tests revealed high tensile strength and elongation at break which were not impaired by surface modification. CONCLUSION: The production of a flexible silicone keratoprosthesis with high optical and mechanical properties was accomplished, with possible use as both permanent and temporary keratoprosthesis.

Corneal Diseases↗

PubMedDate not supplied

[Modification of surface residues of lysine in immunoglobulin G using the spin marker 2,2,5,5-tetramethyl-3-maleimidopyrrolidine-1-oxyl].

Exposed lysine residues of human IgG were modified by a spin-label, 2,2,5,5-tetramethyl-3-male-imidopyrrolidine-1-oxyl at pH 9.2. Under these conditions, the degree of modification was about 10 lysine residues per protein molecule. The ESR spectrum of the spin-labeled immunoglobulin was much more mobile than that of spin-labeled immunoglobulin with the modification degree of about 1 residue that was obtained at pH 7.0. Thus, the sharp increase in the modification degree due to the increase in pH by two units leads to a marked loosening of the tertiary structure of the protein in solution, which is just indicated by the mobile ESR spectrum. Lithium chloride added to the solution of spin-labeled immunoglobulin induces a similar "immobilization" of its ESR spectra as sucrose.

Cyclic N-Oxides↗

PubMedDate not supplied

Toward the development of biomimetic polymers by protein immobilization: PEGylation of insulin as a model reaction.

Many current tissue-engineering investigations aim at the rational control of cell adhesion and tailored composition of biomaterial surfaces by immobilizing various protein and peptide components, such as growth factors. As a step on the way to develop polymers that allow for such surface modifications, water-soluble polymers were used as model substances to examine reactions with proteins containing amine groups. Consequently, the uncommon PEGylation of insulin in aqueous buffers was used to characterize reaction products and simulate the intended immobilization step for surface modification. Amine reactive poly(ethylene glycol)s were synthesized and characterized by (1)H nuclear magnetic resonance and gel-permeation chromatography. Furthermore, the model protein insulin was characterized concerning its accessible amino groups, using a fluorescent dye (TAMRA-SE). The resulting reaction products were identified by reversed-phase high-performance liquid chromatography and electrospray mass spectrometry. After PEGylation with hydrolytically stable poly(ethylene glycol) succinimidyl ester, the obtained PEGylated insulin was investigated by gel filtration chromatography, indicating successful attachment of the hydrophilic polymer chains. Application of an aqueous PEGylation scheme opens the door to the immediate investigation of various growth factors in cell culture, allowing for direct assessment of biological activity after forming the polymer-protein constructs with regard to later immobilization on surfaces.

Animals↗

PubMedDate not supplied

Influence of flow conditions and matrix coatings on growth and differentiation of three-dimensionally cultured rat hepatocytes.

Maintenance of liver-specific function of hepatocytes in culture is still difficult. Improved culture conditions may enhance the cell growth and function of cultured cells. We investigated the effect of three-dimensional culture under flow conditions, and the influence of surface modifications in hepatocyte cultures. Hepatocytes were harvested from Lewis rats. Cells were cultured on three-dimensional polymeric poly-lactic-co-glycolic acid (PLGA) matrices in static culture, or in a pulsatile flow-bioreactor system. Different surface modifications of matrices were investigated: coating with collagen I, collagen IV, laminin, or fibronectin; or uncoated matrix. Hepatocyte numbers, DNA content, and albumin secretion rate were assessed over the observation period. Culture under flow condition significantly enhanced cell numbers. An additional improvement of this effect was observed, when matrix coating was used. Cellular function also showed a significant increase (4- to 5-fold) under flow conditions when compared with static culture. Our data showed that culture under flow conditions improves cell number, and strongly enhances cellular function. Matrix modification by coating with extracellular matrix showed overall an additive stimulatory effect. Our conclusion is that combining three-dimensional culture under flow conditions and using matrix modification significantly improves culture conditions and is therefore attractive for the development of successful culture systems for hepatocytes.

Animals↗

PubMed2004

The potential signalling pathways which regulate surface changes induced by phytohormones in the potato cyst nematode (Globodera rostochiensis).

It has been demonstrated that the surface lipophilicity of the plant-parasitic nematode Globodera rostochiensis decreases when infective larvae are exposed to the phytohormones indole-3-acetic acid (auxin) or kinetin (cytokinin). In the present study, it was shown that inhibition of phospholipase C (PLC) or phosphatidylinositol 3 kinase (PI3-kinase) reversed the effect of phytohormones on surface lipophilicity. The signalling pathway(s) involved in surface modification were investigated using 'caged' signalling molecules and stimulators or inhibitors of different signalling enzymes. Photolysis of the 'caged' signalling molecules, NPE-caged Ins 1,4,5-P3, NITR-5/AM or caged-cAMP to liberate IP3, Ca2+ or cAMP respectively, decreased the surface lipophilicity. Activation of adenylate cyclase also decreased the surface lipophilicity. In contrast, inhibition of PI3-kinase using Wortmannin, LY-294002 or Quercetin, and inhibition of PLC using U-73122 all increased the surface lipophilicity. Two possible signalling pathways involved in phytohormone-induced surface modification are proposed.

Adenine↗

PubMed2006

Treatment of oil spill by sorption technique using fatty acid grafted sawdust.

Treatment of oil spills remains a challenge to environmental scientists and technologists. Among all the existing techniques used for oil treatment, sorption is a popular technique because it is cheap, simple and effective. Among the various sorbents used, sawdust appears to be the most attractive material in terms of cost, versatility and abundance. In the present work, the efficacy of surface modification of sawdust by fatty acids (oleic acid, stearic acid and decanoic acid) and vegetable oils (castor oil or mustard oil) is demonstrated. Sorption of seawater contaminated with crude oil and also weathered oil was greatly enhanced by the surface modification. The results show that oleic acid grafted sawdust (OGSD) has the best sorption capacity for crude oil as well as weathered oil.

Adsorption↗

PubMed2005

Enhanced gene transfer activity of peptide-targeted gene-delivery vectors.

We have evaluated the capacity of the cell-binding heptapeptide SIGYPLP to enhance transgene expression using non-viral and viral gene delivery vectors. Targeted polyplex based vectors showed good levels of DNA uptake in freshly isolated human umbilical vein endothelial cells (HUVECs) compared to untargeted controls, whilst displaying only modest increases in reporter gene activity. The targeted polyplexes showed reduced levels of DNA uptake in cells of a none endothelial origin although they mediated higher levels of transgene expression. The enhanced efficiency of transgene expression may relate to the more rapid rate of cell division. However, since in vivo application of polyplexes is compromised by instability to serum proteins, serum-resistant polyplexes (surface modified with multivalent reactive hydrophilic polymers based on poly[N-(2-hydroxypropyl)methacrylamide] (pHPMA)) were also evaluated for their ability to mediate transgene expression. Surface modification of polyplexes with pHPMA ablates non-specific cell entry, reducing levels of transgene expression, whilst the incorporation of the SIGYPLP peptide into the hydrophilic polymer resulted in restored transgene expression in all formulations tested. The technology of surface modification using pHPMA can also be applied in the context of viruses, masking receptor-binding epitopes and enabling the linkage of novel cell targeting ligands, enabling construction of a virus with receptor-specific infectivity. Retargeting of adenovirus based vectors using the same polymer-peptide construct enhanced levels of transgene expression in HUVECs to greater than 15 times that observed using parental (unmodified) virus, whilst restoring levels of transgene expression in non-endothelial cell lines tested. The use of constructs based on conjugates between hydrophilic polymers and small receptor-binding oligopeptides as agents for retargeting viral or non-viral vectors to cellular receptors represents a simple alternative to the use of antibodies as targeting ligands for cell specific gene delivery.

Cell Line↗

PubMed2005

Generation of cell adhesive substrates using peptide fluoralkyl surface modifiers.

Previous studies reported on the delivery of vitamin E to the surface of a polycarbonate polyurethane (PCNU) to produce antioxidant surfaces, using a bioactive fluorinated surface modifer (BFSM). In the current report, a cell adhesive peptide sequence was coupled to the BFSM, and when blended into PCNU, generated a cell adhesive substrate. An NH2-GK*GRGD-CONH2 peptide sequence (referred to as RGD) with a dansyl label (*) on the lysine residue was coupled via the N-terminal to a BFSM precursor molecule. The resulting RGD BFSM was purified and the pmol peptide/mg BFSM value was assayed by amino acid quantification. The migration of the RGD BFSM in a PCNU blend was confirmed by X-ray photoelectron spectroscopy analysis. U937 macrophage-like cells and human monocytes were seeded onto the PCNU and blends of PCNU with non-bioactive fluorinated surface modifier or the RGD BFSM, in order to study the cell response. Both U937 cells and human monocytes adhered in greater numbers to the RGD BFSM substrate when compared to unmodified PCNU or the blend of PCNU with the non-bioactive fluorinated surface modifying macromolecule substrate. The study demonstrated a novel approach for the introduction of peptides onto the surface of polymers by modifying the surface from within the polymer as opposed to the use of cumbersome post-surface modification techniques. The generation of a peptide substrate points to the possibility of producing complex bioactive surfaces using various peptide BFSMs or pharmaceuticals simultaneously to manipulate cell functions.

Adhesives↗