PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Calcium Compounds”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources
PubMed1997

Mineral trioxide aggregate stimulates a biological response in human osteoblasts.

We report a novel material that appears to stimulate cytokine production in human osteoblasts and allow good adherence of the cells to the material. We have examined cultured osteoblasts (MG-63) in the presence of mineral trioxide aggregate (MTA) as set in moist conditions; secondly, we examined the behavior of these MG-63 cells with respect to cytokine and osteocalcin production and alkaline phosphatase activity. Standard ELISA assays were used for assessment of interleukin (IL)-1 alpha, IL-1 beta, IL-6, macrophage colony stimulating factor (M-CSF), and osteocalcin. Furthermore the levels of alkaline phosphatase were measured to establish the level of differentiation of the cells. Cells without MTA served as controls. Cells also were grown in the presence of polymethylmethacrylate (PMA), the commonly used orthopedic cement. In all dishes cells were seen adhering to the base and MTA at 6 h and had increased to confluence at 144 h. IL-1 alpha (175.1 +/- 32.6 pg/mL), IL-1 beta (154.0 +/- 26.7 pg/mL), and IL-6 (214.7 +/- 21.8 pg/mL) were raised when the cells were grown in the presence of MTA at 144 h, with raised values at all time intervals. M-CSF appeared to be unaffected although the overall value was high (7,045.0 +/- 89.5 pg/mL). In contrast, cells grown in the absence of MTA produced negligible amounts of these cytokines (< pg/mL) as did those cells grown in the presence of PMA. Osteocalcin production increased when cells were grown on MTA from 3.8 +/- 0.87 ng/mL to 19.7 +/- 2.8 ng/mL. No osteocalcin could be detected with PMA. Cells in contact with MTA also appeared to have levels of alkaline phosphatase similar to those reported elsewhere (4.3 +/- 0.21 mumol/mg protein/min). No cells could be found attached to PMA and so no alkaline phosphatase activity could be measured.

Alkaline Phosphatase↗
PubMed1994

Mechanical behavior of glass ionomer cements affected by long-term storage in water.

OBJECTIVES: The early strength of glass ionomer cements was investigated previously (Cattani et al., 1993). Using the same set of glass ionomer cements, this study was designed to determine if mechanical property degradation occurred after an extended period of storage in water. METHODS: In the present study, the effect of aging in water on the compressive, tensile and flexural strengths of twelve commercial glass ionomer cements was evaluated at different time intervals after the beginning of the setting reaction. The aging periods varied from 24 h to 12 mon. RESULTS: The results show that the mechanical properties of the tested materials are in some cases affected by long-term aging in water. The evolution of strength follows distinct patterns of change. It has been established that the glass ionomer cements are neither characterized by a continuous increase nor a continuous decrease in strength. Most of the materials tested maintained a constant strength. However, several of them first display an improvement of the mechanical strength followed by a reduction. In this case, the 24h and the 12 mon strengths are usually similar. SIGNIFICANCE: The aging mechanisms of glass ionomers are complex. Strengthening probably results from additional crosslinking and build-up of a silica gel phase, whereas weakening may result from erosion and plasticizing effect of water.

Acrylic Resins↗
PubMed1984

Inhibition of surfactant release from isolated Type II cells by compound 48/80.

Release of [3H]phosphatidylcholine from pulmonary Type II epithelial cells was stimulated by terbutaline, forskolin and cytochalasin D. Compound 48/80 inhibited both basal and agonist-stimulated release of [3H]PC. The IC50 for inhibition by compound 48/80 was 1-2 micrograms/ml, and was similar for inhibition of both basal and stimulated release of [3H]phosphatidylcholine. Inhibitory effects of 48/80 were noted following a 1 h exposure to compound 48/80 and persisted up to 3 h. The inhibitory effect of compound 48/80 was entirely reversed by removing compound 48/80 from the external milieu. Compound 48/80 had no effect on cytosolic cyclic AMP levels or lactate dehydrogenase release. Inhibition of surfactant release produced by compound 48/80 was unaffected by changes in extracellular calcium concentrations. Compound 48/80 is a non-toxic inhibitor of phosphatidylcholine release from Type II epithelial cells.

Animals↗
PubMed2006

The effects of various additives on setting properties of MTA.

Delayed setting times may limit the use of mineral trioxide aggregate (MTA) in endodontic procedures. The purpose of this study was to identify types and amounts of MTA additives to enhance its setting properties. Additives tested include saline, 2% lidocaine, 3.0% NaOCl gel, chlorhexidine gluconate gel, K-Y Jelly, 3% and 5% CaCl2. The setting times were evaluated using a Vicat apparatus; compressive strengths of set materials were evaluated with an Instron machine. NaOCl gel, K-Y Jelly and 5% CaCl2 decreased the setting time to 20 to 25 min; compressive strengths of these set materials were significantly lower than MTA mixed with water (p < 0.05). Because MTA mixed with NaOCl gel demonstrated good working properties and improved setting time, this combination may be a viable option in single visit procedures where compressive strength of the material is not a critical issue.

Aluminum Compounds↗
PubMed2006

A quantitative comparison of the fill density of MTA produced by two placement techniques.

This study compared the fill density of mineral trioxide aggregate (MTA) produced by hand condensation with that produced by hand condensation with indirect ultrasonic (US) activation. Sixty acrylic blocks with straight or curved canals were instrumented to an apical size 45, and weighed with a digital electronic balance. In 30 randomly chosen specimens, the canal was filled with MTA by hand condensation and weighed. The MTA was removed; the canal was rinsed and dried, and refilled using hand condensation with indirect US activation. In the other 30 specimens, the procedure was carried out identically but in reverse order. The blocks were then reweighed. The weight of the MTA fill produced by the two placement methods in the two canal configurations was analyzed by a two-way ANOVA. Hand condensation with indirect US activation resulted in an MTA fill that was statistically significantly heavier, and thus denser, than that accomplished by hand condensation alone in both curved and straight canals (p < 0.0001).

Aluminum Compounds↗
PubMed2006

Modern endodontic surgery concepts and practice: a review.

Endodontic surgery has now evolved into endodontic microsurgery. By using state-of-the-art equipment, instruments and materials that match biological concepts with clinical practice, we believe that microsurgical approaches produce predictable outcomes in the healing of lesions of endodontic origin. In this review we attempted to provide the most current concepts, techniques, instruments and materials with the aim of demonstrating how far we have come. Our ultimate goal is to assertively teach the future generation of graduate students and also train our colleagues to incorporate these techniques and concepts into everyday practice.

Aluminum Compounds↗
PubMed2005

Genotoxicity and cytotoxicity of mineral trioxide aggregate and regular and white Portland cements on Chinese hamster ovary (CHO) cells in vitro.

OBJECTIVE: Recently, mineral trioxide aggregate (MTA) and Portland cement have been used in dentistry as root-end-filling materials. However, the reported results concerning the biocompatibility of these materials are inconsistent. The goal of this study was to examine the genotoxicity and cytotoxicity of MTA and Portland cements in vitro by the single-cell gel (comet) assay and trypan blue exclusion test. STUDY DESIGN: Chinese hamster ovary (CHO) cells were exposed to MTA and regular and white Portland cements at final concentration ranging from 1 to 1000 microg/mL for 1 h at 37 degrees C. RESULTS: All compounds tested did not show genotoxic effects in all concentrations evaluated. No significant differences (P > .05) in cytotoxicity were observed for all compounds tested. CONCLUSIONS: Taken together, our results suggest that MTA and Portland cements are not genotoxins and are not able to induce cellular death.

Aluminum Compounds↗
PubMed2006

Cellular toxicity of mineral trioxide aggregate mixed with an alternative delivery vehicle.

OBJECTIVE: Mineral trioxide aggregate (MTA) mixed with water has a short working time, delayed setting, and poor consistency. A preliminary study suggested that substituting KY Jelly as a mixing vehicle improves the working properties of MTA. The present study compared the biocompatibility of white MTA mixed with water or with KY Jelly to that of Fuji II cement and of silver amalgam. STUDY DESIGN: Periodontal ligament (PDL) cells were cultured using standard laboratory procedures. Cells were plated in wells at a density of 10,000 cells/well. The test materials were mixed and eluate placed in contact with the PDL cells. Cell viability was determined by measuring mitochondrial enzyme activity using the 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenytl)-2H-tetrazolium inner salt assay. Cytotoxicity was also measured in terms of cell lysis using the lactate dehydrogenase assay. The assays were completed in triplicate after time intervals of 24, 48, and 72 h. Mean cell counts were calculated and converted to a percentage of control results. A 2-way analysis of variance and Tukey honestly significant difference post-hoc test were performed to determine statistical significance. RESULTS: Eluate extractions from all materials caused significantly less cell viability and more cell death than control eluate (medium only) at all eluate time points tested. However, at 72 h the MTA/water, MTA/KY, and amalgam eluate extractions led to significantly better cell viability than the Fuji II eluates. However, there was significantly greater cell lysis for all eluates from the tested materials at 72 h than at 24 h. CONCLUSIONS: Within the limitations of this in vitro study, we conclude that MTA/KY, MTA/water, and amalgam have similar biocompatibility regarding effects of their eluates on human PDL cells, and eluates from all 3 materials demonstrate better biocompatibility than eluates derived from a resin-modified glass ionomer cement.

Aluminum Compounds↗
PubMed1993

Sealing ability of a mineral trioxide aggregate when used as a root end filling material.

This in vitro study used rhodamine B fluorescent dye and a confocal microscope to evaluate the sealing ability of amalgam, super EBA, and a mineral trioxide aggregate when used as root end filling materials. Thirty single-canal teeth were cleaned, shaped, and obturated with gutta-percha and root canal sealer. After application of nail polish to the external surface, the apical 3 mm of each root was resected and 3-mm deep root end preparations were made. The roots were randomly divided into three groups and the root end preparations filled with the experimental materials. All roots were then exposed to an aqueous solution of rhodamine B fluorescent dye for 24 h, longitudinally sectioned, and the extent of dye penetration measured using a confocal microscope. Statistical analysis showed that the mineral trioxide aggregate leaked significantly less than amalgam and super EBA.

Aluminum Compounds↗
PubMed1995

Bacterial leakage of mineral trioxide aggregate as a root-end filling material.

Previous dye leakage studies have shown that mineral trioxide aggregate leaks significantly less than other commonly used root-end filling materials. This study determined the time needed for Staphylococcus epidermidis to penetrate a 3-mm thickness of amalgam, Super-EBA, Intermediate Restorative Material (IRM), or mineral trioxide aggregate (MTA) as root-end filling materials. Fifty-six single-rooted extracted human teeth were cleaned and shaped using a step-back technique. Following root-end resection, 48 root-end cavities were filled with amalgam, Super-EBA, IRM, or MTA. Four root-end cavities were filled with thermoplasticized gutta-percha without a root canal sealer (+ control), and another four were filled with sticky wax covered with two layers of nail polish (- control). After attaching the teeth to plastic caps of 12-ml plastic vials and placing the root ends into phenol red broth, the set-ups were sterilized overnight with ethylene dioxide gas. A tenth of a microliter of broth containing S. epidermidis was placed into the root canal of 46 teeth (40 experimental, 3 positive, and 3 negative control groups). In addition, the root canals of two teeth with test root-end filling materials and one tooth from the positive and negative control groups were filled with sterile saline. The number of days required for the test bacteria to penetrate various root-end filling materials was determined. Most samples whose apical 3 mm were filled with amalgam, Super-EBA, or IRM began leaking at 6 to 57 days.(ABSTRACT TRUNCATED AT 250 WORDS)

Aluminum Compounds↗
PubMed1995

Comparative investigation of marginal adaptation of mineral trioxide aggregate and other commonly used root-end filling materials.

This study investigated the marginal adaptation of mineral trioxide aggregate (MTA) as a root-end filling material, compared with commonly used root-end filling materials by scanning electron microscopy (SEM). Eighty-eight single-rooted freshly extracted human teeth were cleaned, shaped, and obturated with gutta-percha and root canal sealer. Following root-end resection and cavity preparation, the root-end cavities were filled with amalgam, Super-EBA, Intermediate Restorative Material (IRM), or MTA. Using a slow-speed diamond saw, 40 roots were longitudinally sectioned into two halves. Resin replicas of resected root ends of the remaining nonsectioned roots were also prepared. After mounting longitudinal sections of roots and resin replicas of resected roots on aluminum stubs, the distance between the test root-end filling materials and surrounding dentin was measured at four points under SEM. Examination of the original samples showed numerous artifacts in the longitudinal sections of the specimens. In contrast, the resin replicas of resected and filled root ends had no artifacts. Statistical analysis of data comparing gap sizes between the root-end filling materials and their surrounding dentin shows that MTA had better adaptation compared with amalgam, Super-EBA, and IRM.

Aluminum Compounds↗
PubMed1993

Sealing ability of a mineral trioxide aggregate for repair of lateral root perforations.

Amalgam, IRM, and a mineral trioxide aggregate were tested for repair of experimentally created root perforations. Fifty sound, extracted mandibular and maxillary molars were used in this study. A perforation was created on the mesial root surface at about a 45-degree angle to the long axis of each tooth. The tooth was then placed into a saline-soaked "Oasis" to simulate a clinical condition. After placing the repair materials into the perforations, the teeth were kept for 4 wk in the Oasis model. The perforation sites were then stained with methylene blue for 48 h, sectioned, and examined under a dissecting microscope. The results showed that the mineral trioxide aggregate had significantly less leakage than IRM or amalgam (p < 0.05). The mineral trioxide aggregate also showed the least overfilling tendency while IRM showed the least underfilling tendency.

Aluminum Compounds↗
PubMed1998

Longitudinal study of the microleakage of two root-end filling materials using a fluid conductive system.

A comparison of the microleakage of mineral trioxide aggregate (MTA) and a high copper admix amalgam (Valiant PhD) in root-end preparations was made using a fluid conductive device. Thirty-three bilaterally matched pairs of extracted, single-rooted teeth were prepared and obturated using lateral compaction of gutta-percha. The root-ends were resected and 3-mm-deep class I cavity preparations were made. The root-end preparations were filled with either amalgam or MTA. Guttapercha coronal to the root-end fillings was removed leaving only the amalgam or MTA present as a barrier to fluid movement. In the fluid-conductive device, the root canals were filled with a phosphate-buffered saline solution at a pressure of 10 psi. The flow of fluid was measured and compared at 1, 2, 3, 4, 8, 12, 16, 20, and 24 wk. The results showed amalgam to have significantly higher microleakage after 4 wk and higher variability compared with the MTA group.

Aluminum Compounds↗
PubMed2000

Dinoflagellates from marine algal blooms produce neurotoxic compounds: effects on free calcium levels in neuronal cells and synaptosomes.

In this report, evidence is presented that the marine unicellular eukaryotic dinoflagellates can cause neurotoxicity very likely by an increase in intracellular free calcium ions ([Ca(2+)](i)). Determinations of the effects of culture supernatants from different clones of the dinoflagellate Alexandrium sp. isolated from algal blooms on the viability of rat primary neuronal cells revealed that all clones tested were toxic for these cells. In addition, all Alexandrium clones tested, except for A. ostenfeldii BAH ME-141, were found to be toxic for rat pheochromocytoma PC12 cells. No toxicity was observed for culture supernatants from Gonyaulax and Coolia monotis. Calcium ions are important in the process of apoptotic cell death; our studies revealed that the dinoflagellate supernatants from A. lusitanicum K2, A. lusitanicum BAH ME-091, and A. tamarense 1M caused an increase in [Ca(2+)](i) levels in both PC12 cells and primary neuronal cells. These dinoflagellate supernatants, as well as the A. tamarense ccmp 115 supernatant, were found to cause also an increase in free calcium concentration in isolated synaptosomes. Our results suggest that the neurotoxic effects of certain dinoflagellate supernatants may be associated with disturbances in [Ca(2+)](i) levels.

Journal Article↗
PubMed2004

Phosphoserine--a convenient compound for modification of calcium phosphate bone cement collagen composites.

Temporary bone replacement materials on the basis of calcium phosphates and hydroxyapatite (HAP) are used in surgery for filling bone defects. Components which are able to control the nucleation and crystal growth of HAP through their functional groups and which can additionally activate bone cells may be helpful in the development of materials with enhanced remodelling in vivo. In this study, the influence of O-phospho-L-serine (PS) on the materials properties of calcium phosphate bone cement composites was investigated. For up to an addition of 25 mg/g PS a strong increase in the stability of the cements under load was determined. The material was studied by scanning electron microscopy and transmission electron microscopy. A more dense microstructure and a plate-like morphology of the HAP-crystals were detected in the modified composites compared with the non-modified samples. By X-ray powder diffraction an inhibition of the dissolution of alpha-tricalcium phosphate (alpha-TCP) and dicalciumphosphate anhydrous (DCPA) particles was found. alpha-TCP and DCPA are the main constituents of the cement precursor. The results of cell culture studies using rat calvaria osteoblasts demonstrate a good viability of the cells on the PS-modified material. Furthermore, the proliferation and differentiation were found to be enhanced on the PS-modified material.

Animals↗