PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Silicon Compounds”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources

Thermally-regulated molecular selectivity of organosilica sol-gels.

The feasibility of using temperature as a control mechanism for altering the selectivity of organosilica sol-gels for a specific molecule is demonstrated in this communication. The porous organosilica sol-gels act as reversible thermoresponsive materials which become hydrophobic at higher temperature and hydrophilic at lower temperature. When exposed to a mixture of molecules, the gels selectively intake the more hydrophobic species at higher temperature. A particularly remarkable feature of these gels is their ability to preferentially sequester the hydrophobic molecule at high temperature and the hydrophilic species at low temperature. Finally, these gels selectively intake hydrophobic molecules at high temperature and then preferentially release them when the temperature is lowered.

Gels↗

Long-range flow-induced alignment of self-assembled rosette nanotubes on Si/SiOx and poly(methyl methacrylate)-coated Si/SiOx.

Helical rosette nanotubes are obtained through the self-assembly of low molecular weight synthetic modules in water. Here we demonstrate that despite their dynamic nature, these materials respond very well to directional fluid flow and assume long-range order on flat substrates. Persistence length, order, and packing of the rosette nanotubes were found to depend dramatically on the surface properties of both the substrate and the nanotubes and vary from well-ordered long-range 2D films to bundled nanotubes or amorphous conglomerates. While flow-induced long-range alignment of dynamic nanostructures is unprecedented, the chemical tunability of the rosette nanotubes is anticipated to offer a versatile means for investigating the basis of interfacial forces in self-assembled organo-silicon devices and their effect on the stability and physical properties of organic nanostructures on electroactive surfaces.

Circular Dichroism↗

Conducting AFM and 2D GIXD studies on pentacene thin films.

Among all organic semiconductors, pentacene has been shown to have the highest thin film mobility reported to date. The crystalline structure of the first few pentacene layers deposited on a dielectric substrate is strongly dependent on the dielectric surface properties, directly affecting the charge mobility of pentacene thin film OTFTs. Herein, we report that there is a direct correlation between the crystalline structure of the initial submonolayer of a pentacene film and the mobility of the corresponding 60-nm-thick films showing terrace-like structure, as confirmed by 2D grazing-incidence X-ray diffraction and atomic force microscopy. Specifically, multilayered pentacene films, grown from single crystal-like faceted islands on HMDS-treated surface, have shown much higher charge mobility (mu = 3.4 +/- 0.5 cm2/Vs) than those with polycrystalline dendritic islands (mu = 0.5 +/- 0.15 cm2/Vs) on OTS-treated ones.

Crystallization↗

Luminescent silole nanoparticles as chemoselective sensors for Cr(VI).

Colloidal suspensions of 3-aminopropylmethyl(tetraphenyl)silole nanoparticles can be used as selective chemosensors for carcinogenic chromium(VI) analyte. Methylhydrosilole is functionalized by hydrosilation of allylamine, and the colloid is prepared by the rapid addition of water to a THF solution of the silole. The method of detection is through electron-transfer quenching of the fluorescence of the silole colloid (lambda(em) = 485 nm at 360 nm excitation) by the analytes, with hundred parts per billion detection limits. Stern-Volmer plots are linear up to 10 ppm in the case of chromium, but exhibit saturation behavior near 5-10 ppm for arsenic. Dynamic light scattering experiments and AFM measurements show the particle sizes to be around 100 nm in diameter and dependent on solvent composition, with a particle size dispersity of +/-25%. The fluorescence lifetimes of the silole in solution and colloid are approximately 31 ps and approximately 4.3 ns, respectively, while the silole has a lifetime of 6 ns in the bulk solid. A minimum volume fraction of 80% water is necessary to precipitate the colloid from THF, and the luminescence continues to rise with higher water fractions. Colloids in a pH 7 phosphate-buffered suspension show both higher sensitivity and greater selectivity (100-fold) for CrO4(2-) detection than for other oxoanion interferents, NO3-, NO2-, SO4(2-), and ClO4-.

Chromium↗

The heavy analogue of CpLi: lithium 1,2-disila-3-germacyclopentadienide, a 6pi-electron aromatic system.

Lithium 1,2-disila-3-germacyclopentadienide 2-.Li+ was synthesized by the reduction of 1,2-disila-3-germacyclopenta-2,4-diene 1 with potassium graphite followed by treatment with an excess amount of LiBr. The X-ray analysis of 2-.[Li+(THF)] revealed a delocalized aromatic cyclopentadienide-type structure with the diagnostic eta5-coordination of the Li+ cation to the five-membered ring. Aromaticity of this compound was verified and confirmed by theoretical calculations. The solution behavior of the 2-.Li+ is different in nonpolar and polar solvents; in nonpolar toluene, 2-.Li+ maintained the properties of a delocalized aromatic compound with the characteristically shielded 7Li NMR resonance at -5.4 ppm, whereas in polar THF, 2-.Li+ exhibited the properties of a localized nonaromatic compound with the negative charge situated on the Ge atom.

Crystallography, X-Ray↗

Synthesis and structure of ruthenium-silylene complexes: activation of Si-Cl bonds in N-heterocyclic silanes.

Ru(0) complexes of bis(imino)pyridine ligands, [eta2-N3]Ru(eta6-Ar) and {[N3]Ru}2(mu-N2), where Ar = C6H6 or C6H5Me and [N3] = 2,6-(MesN=CMe)2C5H3N, react with N-heterocyclic silicon(IV) compounds to yield Ru(II) silylene complexes of the type [N3]Ru(X)(Cl){Si(NN)} (X = H, Cl, and Si(NN) = N,N'-bis(neopentyl)-1,2-phenylenedi(amino)silylene). The activation of two groups on the silane occurs in a stepwise fashion: initial oxidative addition of a Si-X bond, followed by 1,2-migration (alpha-elimination) of the Si-Cl group to the metal. Reversible dissociation from the Ru(II) center leads to free silylene, which can be preferentially trapped with Ru(0) complexes to generate a zero-valent silylene complex, [N3]Ru(N2){Si(NN)}, which also contains a terminal dinitrogen ligand.

Journal Article↗

Expeditious syntheses of sugar-modified nucleosides and collections thereof exploiting furan-, pyrrole-, and thiophene-based siloxy dienes.

A series of individual sugar-modified pyrimidine nucleosides including enantiomerically enriched 2',3'-dideoxynucleosides 14a-c (alpha and beta anomers of L- and D-series), 2',3'-dideoxy-4'-thionucleosides 21a-c (alpha and beta anomers of L- and D-series), and 2',3'-dideoxy-4'-azanucleosides 28a-c (beta anomers of L- and D-series) were synthesized, with uniform chemistry and high stereochemical efficiency, exploiting a triad of versatile heterocyclic siloxy dienes, namely, 2-(tert-butyldimethylsiloxy)furan (TBSOF), 2-(tert-butyldimethylsiloxy)thiophene (TBSOT), and N-(tert-butoxycarbonyl)-2-(tert-butyldimethylsiloxy)pyrrole (TBSOP). The synthetic procedure advantageously used both enantiomers of glyceraldehyde acetonide (D-1 and L-1) as sources of chirality and as synthetic equivalents of the formyl cation. The outlined chemistry also allowed for the rapid assemblage of a 30-member collection of racemic nucleosides (D,L-L) as well as one 15-member ensemble of chiral analogues (L-L), along with some related sublibraries.

Furans↗

Asymmetric synthesis of silylated alpha-amino acid esters through dynamic kinetic resolution.

Esters of three types of silylated alpha-amino acids have been prepared from appropriate zirconaaziridines. Slow addition (syringe pump) of the (R,R) carbonate of trans-stilbene gave metallacycles with the maximum possible diastereomeric excess (as determined by the diastereomeric excess produced by the Hoffmann test-the same reaction but with racemic carbonate). Methanolysis gave esters (RO(2)C)CH(R')(NHPh) (R' = Me(3)Si, Me(3)SiCH(2), and p-Me(3)SiC(6)H(4)) with the same optical purity at the alpha carbon.

Algorithms↗

Tertiary pentyl groups enhance salen titanium catalyst for highly enantioselective trimethylsilylcyanation of aldehydes.

tert-Pentyl groups are recognized to be highly effective steric groups that can enhance enantioselectivity of salen titanium complexes when they are used in asymmetrical cyanation of aromatic aldehydes. High ee (92-97%) has been obtained with several aldehyde substrates. Compared to its tert-butyl analogue, the tert-pentyl group has been found to improve enantioselectivity and in some cases quite dramatically.

Acetonitriles↗

Internal field switching in CdSe quantum dot films on Si.

If a thin film (tens of nm) of CdSe quantum dots (4 nm diameter) is deposited by chemical bath deposition onto various substrates, the films, although essentially intrinsic, behave as if they were n-type with respect to charge separation. However, films deposited under certain deposition conditions on Si (both n(+)- and p(+)-type) behave as if they were p-type. In this case, we show that it is possible to switch this p-type photoresponse by either light illumination intensity or injection of electrons from an external filament. Using both surface photovoltage spectroscopy and a novel adaptation of X-ray photoelectron spectroscopy, we show how this behavior results from a Cd(OH)(2) layer adsorbed at the Si surface at the beginning of the deposition. This response is explained by a competition between a high concentration of relatively shallow hole traps in the CdSe and a lower concentration of deeper electron traps in the Cd(OH)(2). The relative occupancies of these traps determine the fields in the film and their response to external parameters.

Cadmium Compounds↗

Synthesis and characterization of exohedrally silylated M@C82 (M = Y and La).

The silylation of endohedral mono-metallofullerenes (Y@C(82) and La@C(82)) and isolation of the corresponding adducts by HPLC separation have been accomplished. The redox properties of the silylated mono-metallofullerene were first clarified by CV and DPV measurements, indicating that the bis-silylated mono-metallofullerenes have lower oxidation and higher reduction potentials than the parent mono-metallofullerenes. These results reveal that bis-silylation is very effective for producing the electronegatively mono-metallofullerene derivatives as well as empty fullerenes.

Fullerenes↗

Electrode independent chemoresistive response for cobalt phthalocyanine in the space charge limited conductivity regime.

The electrical properties of 50 nm thick metallophthalocyanine films, prepared by organic molecular beam epitaxy (OMBE) on interdigitated electrodes, were studied with DC current-voltage measurements and impedance spectroscopy. The transition from Ohmic behavior at low voltages to space-charge-limited conductivity (SCLC) at higher voltages depends on the metal electrode (Pt, Pd, and Au), but does not correlate with the work function of the electrode. Impedance spectroscopy studies show the coexistence of low- and high-frequency traps in the thin film devices, and the contribution of low-frequency traps associated with Ohmic behavior diminishes at higher bias. Although device resistances are strongly influenced by the electrode material, and vary by a factor of over 300, the relative chemical sensor responses on exposure to dimethyl methylphosphonate (DMMP), methanol, water, or toluene vapors are similar for CoPc on Pt, Pd, and Au electrodes when these devices are operated in the SCLC regime at room temperature. When the devices are operated at voltages where the low-frequency interfacial traps are filled, the sensor response to analyte becomes uniform and reliable regardless of the specific interfacial electrode contact.

Electric Conductivity↗

Hemicyanine dye as a surfactant for the synthesis of bicontinuous cubic mesostructured silica.

In this paper, we developed a facile way to synthesize highly ordered optically active MCM-48 at room temperature, by using mixtures of hemicyanine dye N-alkyl-2-[p-(N,N-diethylamino)-o-(alkyloxy)]pyridinium bromide (denoted as o-CnPOCm, Scheme 1) and cetyltrimethylammonium bromide (CTAB) as the structure-directing agents. The mesoporous materials were systematically characterized by powder X-ray diffraction, transmission electron microscopy, nitrogen sorption, and thermogravimetry. The resultant MCM-48 exhibits unusually high thermal stability. For example, in the case of o-C(2)POC(14), it can retain its cubic structure even under calcinations at 900 degrees C for 5 h, although the pore size is shifted to the micropore region because of shrinkage of the framework. The typical surface area and pore volume are 980 m(2)/g and 0.44 cm(3)/g, respectively, for the powder calcined under such a high temperature. This is the first report of room-temperature synthesis of MCM-48 with such good thermal stability using cationic-cationic mixed surfactant as the structure-directing agent. The fluorescence lifetimes of the as-synthesized mesostructured MCM-48 were also measured, and the result showed that the incorporated dye molecules have a 1 order of magnitude longer lifetime than that of free species in solution, showing that the hemicyanine dye molecules are well dispersed within the CTAB surfactant matrix. Furthermore, we compared eight other dye congeners (Scheme 1) to fully investigate the mesophase resulting from the dye-CTAB system. The results show that, upon addition of the dye surfactant to the starting mixtures, the mesostructured silica undergoes an intrinsic phase-transition process; however, specific dye geometry is required to obtain MCM-48 at room temperature. Those functionalities as well as the designed synthesis of this novel mesostructured MCM-48 material promise a bright future in multifunctional optical and electric nano- and microdevices (e.g., waveguides, laser, light-emitting diodes, etc.) and also shed light on the self-assembly behavior in complex colloidal system.

Carbocyanines↗

The cycloadditions of various substituted carbenes, silylenes, and germylenes onto the diamond (100) surface: a theoretical exploration.

The cycloadditions of 21 singlet substituted carbenes, silylenes, and germylenes onto the diamond (100) surface have been theoretically studied by means of density functional theory coupled with effective cluster models. The calculated reaction energies and reaction pathways have disclosed that the substituents play an important effect on the reaction profiles for the additions of carbenes, silylenes, and germylenes onto the diamond (100) surface. Our theoretical investigations illustrate that, irrespective of carbenes, silylenes, and germylenes, the cycloadditions of those with electropositive substituents (such as H and CH(3)) onto diamond (100) are much more favorable than those with electronegative and pi-donating substituents (such as F and NH(2)) both thermodynamically and kinetically. In broad perspective, we believe that a similar reactivity trend can also be extended to that of Si (100), Ge (100), fullerene, single-walled carbon nanotube, disilenes, digermenes, silenes, and germenes because all of these materials feature an analogous bonding motif.

Cyclization↗

Double-layered TiO2-SiO2 nanostructured films with self-cleaning and antireflective properties.

Dual function of self-cleaning and antireflection can be created in double-layered TiO2-SiO2 nanostructured films. The film were prepared by (1) layer-by-layer deposition of multilayered SiO2 nanoparticles with polydiallyldimethylammonium (PDDA) cations, (2) layer-by-layer deposition of multilayered titanate nanosheets with polications on PDDA/SiO2 multilayer films, and (3) burning out the polymer and converting titanate nanosheets into TiO2 by hearing at 500 degrees C. The as-prepared films, consisting of a porous SiO2 bottom layer and a dense TiO2 top layer, improved the transmittance of glass or quartz substrates, as demonstrated by transmission spectra collected at normal incidence. The photocatalytic properties of the films were studied by the change of the water contact angle together with the decay of the IR absorption of the hydrocarbon chain of octadecylphosphonic-acid-modified films under 2.6 mW cm-2 UV illumination. Both the antireflective and the photocatalytic properties of the films were dependent on the number of PDDA/nanosheet bilayers deposited. however, excellent surface wettability of the films for water was obtained, independent of the preparation conditions. The experimental findings are discussed in terms of the special structure of the double-layered nanostructured film.

Catalysis↗

Using novel polysaccharide-silica hybrid material to construct an amperometric biosensor for hydrogen peroxide.

A new type of sol-gel organic-inorganic hybrid material was developed and used for the fabrication of an amperometric hydrogen peroxide biosensor. This material was prepared from natural chitosan and recently introduced completely water-soluble precursor, tetrakis(2-hydroxyethyl) orthosilicates (THEOS), by the sol-gel process without the addition of organic solvents and catalysts. The gelation time for the sol-gel transition and dynamic rheological properties of the resultant gel matrix could be modulated by the amount of added THEOS. The structure of the hybrid gel was made up of a network and spherical particles, as confirmed by SEM observation. By electrochemical experiments, it was found that such a hybrid gel matrix could retain the native biocatalytic activity of the entrapped horseradish peroxidase and provide a fast amperometric response to hydrogen peroxide. The linear range for the determination of hydrogen peroxide was found to be from 1.0 x 10(-6) to 2.5 x 10(-4) mol/L with a detection limit of 4.0 x 10(-7) mol/L. The apparent Michaelis-Menten constant was determined to be 2.198 mmol/L. To improve the analytical characteristics of the fabricated biosensor, the effects of applied potential and pH value on the steady-state current were studied. Under the optimized experimental conditions, the fabricated biosensor was found to have good analytical performance, reproducibility, and storage stability.

Biocompatible Materials↗