SEARCH · PubMed Health

Results for “Elastic Modulus”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources

PubMed2001

Mechanical characteristics of various tempers of as-received cobalt-chromium archwires.

The mechanical characteristics of 24 of the 36 wire cross-sectional configurations were investigated in the as-received state from among the 4 tempers of a cobalt-chromium product. After engineering mechanics were used to validate the efficacy of the span combinations, each wire was measured in flexure to determine its elastic modulus and in tension to determine its yield strength, ultimate tensile strength, and ductility. Other combined characteristics were evaluated, including flexibility, resilience, and the yield strength criterion. In these as-received materials the formability sometimes followed expectations, but the flexibility and resilience characteristics were variable and independent of temper. And although the elastic modulus was independent of testing parameters, it was affected by the loss of material at the corners of rectangular wires. Overall, the stiffnesses of cobalt-chromium wires in round configurations were comparable to those of multi- and single-stranded stainless steel wires but were 3 and 6 times greater than the stiffnesses of beta-titanium and nickel-titanium wires, respectively. In the final analysis, these as-received wires do not meet their potential as a variably formable and variably resilient alternative to stainless steel. Perhaps this is why cobalt-chromium wires have never had the impact on the profession that was expected from them several years ago.

Algorithms↗

PubMed1994

Mechanical and dimensional adaptation of rat aorta to hypertension.

To investigate mechanisms of the mechanical adaptation of soft biological tissues to load, effects of hypertension on the mechanical properties and wall dimensions of thoracic aortas were studied in rats. Goldblatt hypertension was induced in male Wistar rats aged 8 to 9 weeks by constricting their left renal arteries. Two, 4, 8, or 16 weeks after the operation, thoracic aortas were excised and used to determine static pressure-diameter relations and wall dimensions. Wall thickness correlated significantly with the systolic blood pressure before sacrifice, Psys, at each period. The aortic hoop stress became almost constant at all Psys 2 weeks after the operation. On the other hand, the stress calculated for 100 and 200 mmHg correlated negatively with Psys. The incremental elastic modulus of the wall at Psys had a significant correlation with Psys having a positive slope at each period, although the correlation disappeared at 16 weeks after the operation. These results imply that: 1) thickness of the aortic wall increases very rapidly in response to hypertension; 2) wall stress developed by the in-situ blood pressure is kept constant at a normal level irrespective of hypertension; 3) elastic modulus of the wall of the hypertensive rats at the in-situ blood pressure becomes equal to the normal value after relatively long period of time; 4) in response to the alteration of the applied force, dimensional change appears much earlier than the change in the elastic properties.

Adaptation, Physiological↗

PubMedDate not supplied

Sintered hydroxyfluorapatites. Part II: mechanical properties of solid solutions determined by microindentation.

Fluoride substitution within hydroxyapatite is an important occurrence for biological apatites and is a promising approach for the chemical modification of synthetic hydroxyapatite. Limited information on the influence of fluoride substitution for hydroxyl groups on the mechanical properties has provided the rationale for this study. Hydroxyfluorapatites with 0%, 20%, 40%, 60%, 80% and 100% replacement of hydroxyl groups with fluoride ions were assessed for hardness, elastic modulus, fracture toughness and brittleness using microindentation of sintered pellets. The production of samples with a similar grain size and density allowed the influence of fluoride on mechanical properties to be determined. It was found that the hardness remains unaffected until 80% replacement of hydroxyl groups with fluoride, after which the hardness rapidly increases. The elastic modulus increases linearly with fluoride content. Fracture toughness is improved with fluoride incorporation into the lattice and reaches a peak of 1.8 for a 95% dense sintered pellet with a 60% fluoride replacement, followed by a rapid decrease at higher fluoride concentrations. The brittleness index is lowered to a minimum at 60%, after which a rapid increase occurs. High fluoride levels are unfavourable from a mechanical perspective, are not recommended for biomaterials, and can lead to a higher incidence of fracture where sodium fluoride, for treatment of osteoporosis, may produce a highly fluoridated hydroxyapatite.

Biocompatible Materials↗

PubMed1997

Revisited physicochemical and transport properties of respiratory mucus in genotyped cystic fibrosis patients.

We investigated the physicochemical and transport properties of sputum samples collected in physiotherapy from a well-documented group of 27 cystic fibrosis (CF) patients with identified CF genotypes. Sputum samples were characterized ex vivo for their water content, surface properties (surface tension and contact angle), rheologic properties (viscosity and elastic modulus), and transport properties (mucociliary and cough transport). These data were analyzed in relation to the clinical status of the patients (FEV1, FVC, Shwachman score, Brasfield score, nutritional status), their genotype, and the degree of infection of their sputa (leukocyte and Pseudomonas aeruginosa counts). We observed negative and significant correlations between mucociliary transport and elastic modulus of the patients' sputum (r = -0.63, p < 0.01), and between the cough transport and contact angle of the sputum (r = -0.81, p < 0.0001), respectively. The P. aeruginosa count was also significantly correlated with the sputum water content (r = -0.53, p < 0.02) as well as with the cough transport of the sputum (r = -0.62, p < 0.01). In CF patients with a sputum leukocyte count > 2,000/mm3, the sputum water content (p < 0.02), FEV1 (p < 0.05) and FVC (p < 0.02) were significantly lower than those of CF patients with a leukocyte count < or = 2,000/mm3. CF patients with a homozygous delta F 508 genotype had significantly greater values of sputum water content (p < 0.05), and cough-transport capacity (p < 0.05) than did heterozygous patients. No correlation was observed between the sputum properties and any of the clinical data. These results suggest that the control of infection should be emphasized in CF, since it can directly or indirectly modulate the degree of hydration, and therefore the physicochemical and transport properties, of airway secretions.

Adolescent↗

PubMedDate not supplied

Effect of long-term ovariectomy on bone mechanical properties in young female cynomolgus monkeys.

Feral adult female cynomolgus monkeys were divided into two groups: normal controls and ovariectomized. Tibiae and trabecular bones from the femoral head, from each group, were tested using a materials testing machine. The bending stiffness of the tibiae was measured by nondestructive three-point bending tests and their maximum torque capacity by destructive torsion tests. The compressive strength of the trabecular bones was measured by compression tests. Ovariectomy caused significant decreases in elastic modulus of the tibiae (p < 0.008), measured by three-point bending tests, and in shear modulus (p < 0.015), failure shear stress (p < 0.01), and failure torque (p < 0.001) of the tibiae, measured by torsion tests. It caused a significant decrease in cortical bone density (p < 0.005), but no significant changes in tibial cross-sectional area and in cortical shaft external and internal diameters. The differences in elastic modulus, maximum compressive strength, and density of femoral trabecular bone samples between the two groups were not significant.

Animals↗

PubMed2001

Hydrogels as potential probes for investigating the mechanism of lenticular presbyopia.

PURPOSE: To synthesize and characterize hydrogels with viscoelastic properties comparable to those of the natural lens. METHODS: Hydrogels were synthesized in water by free-radical polymerization of the monomer poly(ethyleneglycol)-monomethacrylate. Three different molecular weights of poly(ethyleneglycol)-dimethacrylates were used as crosslinkers. For each crosslinker used, five different monomer-to-crosslinker weight ratios were utilized while the total mass of the reactants was kept constant. In another series, the concentration of the reactants was varied while the weight ratio of monomer to crosslinker was kept constant at 95 : 5. The percent optical transmission, equilibrium water content, moduli (elastic, shear, storage, and loss), and retardation time constant of the hydrogels were determined. In addition, endocapsular polymerization was performed in the capsular bag of porcine eyes. RESULTS: The hydrogels examined exhibited the following ranges for viscoelastic properties: elastic modulus, 1.33-2.37 x 10(4) Pa; shear modulus, 3.35-6.72 x 10(3) Pa; storage modulus, 1.65-6.24 x 10(4) Pa. For any given hydrogel, raising its crosslinker's weight ratio increased its moduli and decreased its equilibrium water content and optical transmission. For any given monomer-to-crosslinker weight ratio, increasing the molecular weight of the crosslinker reversed these trends. Reactant concentrations increased the elastic modulus and decreased the equilibrium water content. The hydrogels formed ex vivo (in the evacuated capsular bag of porcine eyes) allowed for the clear and undistorted viewing of objects. CONCLUSIONS: Hydrogels that exhibit physical and mechanical properties comparable to those of the natural lens were successfully identified, synthesized, and characterized, and the feasibility of endocapsular polymerization was demonstrated.

Animals↗

PubMed1980

Load-bearing mode of the knee joint: physical behavior of the knee joint with or without menisci.

The load-bearing mode of the knee joint and the load-carrying capacity of the menisci were investigated by a load-deflection and load-contact study using stresses of as much as 3 times body weight on 14 freshly amputated knee specimens. A flection angle of 0 degrees was used. The average deflection and the average size of the contact area of the intact knees were 1.04 x 10(-1) cm and 14.1 cm2 respectively when the knees were loaded to 1,500 N. The elastic modulus of the entire joint was 2.7 x 10(2) MPa over the load of 1,500 N. At first, the knee joint was not congruous at a low load under about 500 N; the joint contacts both menisci in conjunction with some part of the exposed cartilage. However, the joint became markedly congruous at higher loads, around 1,000 N. The joint was in contact with the menisci and the exposed cartilage, and as more load was applied, the areas of contact widened to the peripheral areas of both the compartments. After menisci were removed, the deflection increased. The size of the contact areas decreased significantly by a third to a half. Consequently, the average stress increased 2 to 3 times that of the intact knee. The elastic modulus was increased over 2 fold after menisci were removed. The results of the energy study indicate that the menisci gave more elastic stability to the joint. After the menisci were removed, more energy was dissipated during cyclic loading. Thus, the menisci provide surface compliance and serve to transmit stresses across the wider areas to the periphery, and, therefore, help to avoid stress concentration both in the articular cartilage and in the subchondral bone, especially under high loads over 1,000 N.

Adult↗

PubMed2004

Distorting limb design for dynamically similar locomotion.

Terrestrial mammals of different sizes tend to move in a dynamically similar manner when travelling at speeds corresponding to equal values of the Froude number. This means that certain dimensionless locomotor parameters, including peak vertical ground reaction force relative to body weight, stride length relative to leg length and duty factor, are independent of animal size. The Froude number is consequently used to define equivalent speeds for mammals of different sizes. However, most musculoskeletal-tissue properties, including tendon elastic modulus, do not scale in a dynamically similar manner. Therefore, mammals could not be completely dynamically similar, even if perfectly geometrically similar. We argue that, for mammals to move in a dynamically similar manner, they must exhibit systematic 'distortions' of limb structure with size that compensate for the size independence of the tendon elastic modulus. An implication of this is that comparing mammals at equal Froude numbers cannot remove all size-dependent effects. We show that the previously published allometry of limb moment arms is sufficient to compensate for size-independent tendon properties. This suggests that it is an important factor in allowing mammals of different sizes to move in a dynamically similar manner.

Animals↗

PubMed1976

Mechanical properties of the dog renal capsule.

The renal capsule is an important determinant of whole kidney volume/pressure relationships. To gain further insights into its possible role we examined the mechanical properties of the dog renal capsule using standard materials testing procedures. From each of four locations on the kidney surface, the following mechanical properties of the renal capsule were determined: elastic modulus (force/unit of cross-sectional area theoretically required to double the length of the specimen), tensile stiffness (force/unit width theoretically required to double the length of the specimen), ultimate strength (stress at time of fracture of the specimen), and maximum strain (percent strain at time of the fracture of the specimen). We found that the elastic modulus of the renal capsule from all capsular sites was substantially greater than values previously reported for dog aorta. The stiffness of the capsule covering the anterior-posterior surface of the kidney was found to be about 50% greater than the stiffness of the capsule covering the lateral and polar surfaces of the kidney. The ultimate strength of the anterior-posterior capsule was significantly greater than that of the lateral or polar capsule. This finding may explain the clinical observation that the spontaneous rupture of the renal capsule and parenchyma associated with the acute swelling of transplant rejection is confined almost exclusively to the lateral and polar portions of the renal capsule and cortex. The mean maximum strain at each capsular site was about 35%. This degree of circumferential expansion corresponds to about a doubling of kidney volume. Thus, this observation suggests that the renal capsule is at risk to undergo spontaneous rupture when renal volume increases of this magnitude are observed.

Animals↗

PubMed2002

[Development of GI-II tinted infiltration glass and determination of its properties].

OBJECTIVE: Glass is the weak phase in the glass-alumina composite, and it plays a key role in determining the physical, mechanical and optical properties. The purpose of this study was to explore the fabrication arts of GI-II tinted infiltration glass and determine its properties. METHODS: The thermal properties of the glass were tested on a TMA2940 thermal analyzer with heating rate of 5 degrees C/min and temperature range of 25-750 degrees C. The bar-shaped specimens were prepared with the size of 25 mm x 5 mm x 2 mm and their flexural strengths and elastic modulus with 3-point bending test were measured. The Vicker's hardness and indentation fracture toughness were also determined. The refractive index and changes of chemical constituents were tested by means of V prismatic refractometer and 2910 DTA analyzer. RESULTS: The results showed that the thermal expansion coefficient, Tg and Tf, refractive index, 3-point bending flexural strength, bending elastic modulus, Vicker's hardness, indentation fracture toughness and density were 6.997 x 10(-6) degrees C-1 (25-500 degrees C), 635 degrees C and 650 degrees C, 1.64 MPa, 96.27 MPa, 31.16 GPa, 5.534 GPa, 1.05 MN.m1/2, and 3.214 g/cm3 respectively. Though certain heat processing conditions did result in micro-crystalline in the glass, it remained stable under routine glass infiltration firing cycles. CONCLUSION: GI-II tinted infiltration glass had favorable physical, mechanical properties and good thermal stability.

Aluminum Oxide↗

PubMed2005

The metabolic syndrome, cardiopulmonary fitness, and subcutaneous trunk fat as independent determinants of arterial stiffness: the Amsterdam Growth and Health Longitudinal Study.

BACKGROUND: The mechanisms that link the metabolic syndrome to increased cardiovascular risk are incompletely understood, especially in young people. We therefore examined whether the metabolic syndrome was associated with arterial stiffness and whether any such associations were independent of cardiopulmonary fitness and subcutaneous trunk fat. METHODS: Cross-sectional analyses of data on 364 men and women aged 36 years from the Amsterdam Growth and Health Longitudinal Study (ninth follow-up measurement, year 2000). The prevalence of the metabolic syndrome was defined by a slightly modified National Cholesterol Education Program (NCEP) definition. Arterial stiffness was ultrasonically estimated by distensibility and compliance of the carotid, femoral, and brachial arteries and by the carotid elastic modulus. RESULTS: The prevalence of the metabolic syndrome in this young adult population was 18.3% in men and 3.2% in women. Individuals with the syndrome compared with individuals without risk factors had 11.2% and 17.0% less distensibility and 9.0% and 18.2% less compliance of the carotid and femoral arteries, respectively, and 15.9% higher carotid elastic modulus. After adjustment for cardiopulmonary fitness and subcutaneous trunk fat, the metabolic syndrome remained significantly associated with stiffness of the carotid but not the femoral artery. In addition, poor cardiopulmonary fitness and high subcutaneous trunk fat were associated with arterial stiffness, and this was independent of the metabolic syndrome. CONCLUSIONS: A modified NCEP definition of the metabolic syndrome identified young individuals with increased arterial stiffness. The mechanisms that link the metabolic syndrome, poor cardiopulmonary fitness, and high subcutaneous trunk fat to greater arterial stiffness overlap but are partly independent of each other.

Adolescent↗

PubMed1996

Human anterior and posterior cervical longitudinal ligaments possess similar tensile properties.

One hundred bone-ligament-bone complexes were isolated from the cervical spines of 20 fresh-frozen human cadavers and mechanically tested in uniaxial tension. Load-elongation curves representing the structural properties of the complex were obtained, and stiffness, ultimate load, energy at failure, and elongation were determined from the curves. Stress-strain curves representing the mechanical properties of the ligament substance were also obtained, and elastic modulus was determined from these curves. Comparisons were made between anterior and posterior longitudinal ligaments and among cervical levels. The cross-sectional area of the anterior ligament was smaller at the C2-C3 level than at subaxial levels. There was a trend toward less stiffness but more energy at failure and greater elastic modulus for the anterior compared with the posterior ligaments at subaxial levels, although the differences were not statistically significant (p > 0.05).

Aged↗

PubMed1980

Electro-mechanical properties of human erythrocyte membranes: the pressure-dependence of potassium permeability.

Electrical breakdown of cell membranes is interpreted in terms of an electro-mechanical model. It postulates for certain finite membrane areas that the actual membrane thickness depends on the voltage across the membrane and the applied pressure. The magnitude of the membrane compression depends both on the dielectric constant and the compressive, elastic modulus transverse to the membrane plane. The theory predicts the existence of a critical absolute hydrostatic pressure at which the intrinsic membrane potential is sufficiently high to induce "mechanical" breakdown of the membrane. The theoretically expected value for the critical pressure depends on the assumption made both for the pressure-dependence of the elastic modulus of the membrane and of the intrinsic membrane potential. It is shown that the critical pressure is expected at about 65 M Pa. The prediction of a critical pressure could be verified by subjecting human erythrocytes to high pressures (up to 100 M Pa) in a hyperbaric chamber. The net potassium efflux in dependence on pressure was used as an criterion for breakdown. Whereas the potassium net efflux was linearly dependent on pressure up to 60 M Pa, a significant increase in potassium permeability was observed towards higher pressure in agreement with the theory. The increase in the net potassium efflux above 60 M Pa was reversible, as indicated by measurements in which the same erythrocyte sample was subjected to several consecutive pressure pulses. Temperature changes in the erythrocyte suspension during compression and decompression were so small (less than 2 degrees C) that they could not account for the observed effects.

Erythrocyte Membrane↗

PubMed2003

Micro- and nano-testing of calcium phosphate coatings produced by pulsed laser deposition.

Micro- and nano-testing methods have been explored to study the thin calcium phosphate coatings with high adhesive strength. The pulsed laser deposition (PLD) technique was utilised to produce calcium phosphate coatings on metal substrates, because this type of coatings exhibit much higher adhesive strength with substrates than conventional plasma-sprayed coatings. Due to the limitations of the conventional techniques to evaluate the mechanical properties of these thin coatings (1 microm thick), micro-scratch testing has been applied to evaluate the coating-to-substrate adhesion, and nano-indentation to determine the coating hardness and elastic modulus. The test results showed that the PLD produced amorphous and crystalline HA coatings are more ductile than titanium substrates, and the PLD coatings are not delaminated from the substrates by scratch. Also, the results showed that the crystalline HA coating is superior in internal cohesion to the amorphous one, even though the lower elastic modulus of amorphous coating could be more mechanically compatible with natural bone.

Calcium Phosphates↗

PubMed1998

Mechanical Properties of Large Arteries in Mother and Fetus during Normal and Diabetic Pregnancy.

> Objective: To assess the influence of diabetes mellitus on the mechanical wall properties of large maternal and fetal arteries in pregnant women. Methods: Prospective serial monitoring of arterial wall characteristics, using ultrasonic phase-locked tracking of vessel diameters and oscillometric brachial blood pressure measurements. Ten pregnant women with insulin-dependent diabetes mellitus and 15 with gestational diabetes were studied and compared with 20 women in uncomplicated gestation. Results: In women with uncomplicated pregnancy, the stiffness index and the elastic modulus of the maternal aorta were lower (both P < 0.05), whereas the pulse amplitude and the strain were higher (both P < 0.05) in the 12th gestational week than in the 6th week postpartum. These differences did not appear in pregnancy complicated by insulin-dependent diabetes. In early gestation, higher aortic stiffness index and elastic modulus (both P < 0.05) and lower pulse amplitude and strain (both P < 0.05) were recorded in gravidae with insulin-dependent diabetes compared with nondiabetic pregnant women; those with gestational diabetes were not detected in early pregnancy. No intergroup or intragroup differences of stiffness index and pulse amplitude were found in the carotid artery in corresponding gestational ages. In the fetal aorta, the pulse wave velocity increased during the third trimester of normal gestation (P < 0.05) but not in insulin-dependent diabetic pregnancy. Conclusion: The difference found concerning the aortic stiffness between women with insulin-dependent diabetes during pregnancy and those with uncomplicated pregnancy might be interpreted as an altered cardiovascular adaptation to pregnancy in women with diabetes.

Journal Article↗

PubMed1992

Effects of continuous quantitative vibration on rheologic and biological behaviors of the intervertebral disc.

The authors attempted to investigate the effect of vibration on the physiologic behavior of the intervertebral disc from rheologic and biological responses. Using fresh disc-cartilaginous end plate complexes of porcine coccygeal vertebrae, the frequency characteristics of dynamic compressive elastic modulus and dissipated energy were monitored by means of a biomechanical spectrometer. The effect of vibration on proteoglycan synthetic rates and solute transport in the intervertebral disc were analyzed using a radioisotope. When the disc-cartilaginous plate complexes were subjected to sinusoidal vibration with a static load of 5 N and a vibratory load of 3 N, the elastic modulus decreased at 11 Hz compared with 3.5 Hz. After this, it increased again at 35 Hz. The dissipated energy increased rapidly with an increase in frequency. Proteoglycan synthetic rates did not change appreciably down to the inner and outer layers of the anulus fibrosus, but the rate in the nucleus pulposus alone decreased remarkably at 10 Hz and 35 Hz. Solute transport increased as a response to vibration, particularly in the nucleus pulposus. When the intervertebral disc is exposed to vibration for a long period of time, therefore, the proteoglycan content in the nucleus pulposus may be decreased, eventually resulting in disruption of matrix integrity.

Animals↗

PubMed1997

Differential alterations of common carotid and femoral artery distensibility in 12-week-old spontaneously hypertensive rats.

OBJECTIVE: In essential hypertension, the mechanical properties of the radial artery have been shown to be largely unaltered, whereas more controversial and less reliable data have been obtained for the common carotid artery. We therefore examined the distensibility/pressure relationships of the predominantly elastic common carotid artery and of the predominantly muscle-type femoral artery in 12-week-old normotensive Wistar-Kyoto (WKY) rats and spontaneously hypertensive rats (SHR). METHODS: Eleven 12-week-old SHR and 10 age-matched WKY rats were anesthetized with sodium pentobarbitone. Blood pressure and pulse rate were measured by catheters inserted in the common carotid and in the femoral arteries, while contralateral arterial diameter was continuously recorded via an echo-tracking device. Arterial compliance was derived according to the Langewouters formula, and its values were normalized for the diameter, to obtain distensibility/pressure curves and to calculate the distensibility index. The Peterson elastic modulus was also calculated in order to obtain a pressure-independent estimate of arterial mechanical properties. RESULTS: Femoral artery distensibility/pressure curves and distensibility index were similar in the two groups of rats, the latter being 1.13+/-0.13 mm/mmHg10(-3) in SHR and 1.28+/-0.15 mm/mmHg10(-3) in WKY rats (means+/-SEM; NS). In contrast, in SHR, common carotid artery mechanical properties were clearly impaired, as shown by a marked reduction in distensibility index (2.55+/-0.16 mm/mmHg10(-3) in SHR versus 3.4+/-0.3 mm/mmHg10(-3) in WKY rats; P< 0.05), and by a significant increase in the Peterson elastic modulus. CONCLUSIONS: In the SHR model, high blood pressure alters the mechanics of large arteries even in the relatively early stage of the disease; however, the alterations are not homogeneous inasmuch elastic-type vessels are affected to a much greater extent than muscle-type vessels.

Animals↗

PubMed2005

Mechanical properties of femoral trabecular bone in dogs.

BACKGROUND: Studying mechanical properties of canine trabecular bone is important for a better understanding of fracture mechanics or bone disorders and is also needed for numerical simulation of canine femora. No detailed data about elastic moduli and degrees of anisotropy of canine femoral trabecular bone has been published so far, hence the purpose of this study was to measure the elastic modulus of trabecular bone in canine femoral heads by ultrasound testing and to assess whether assuming isotropy of the cancellous bone in femoral heads in dogs is a valid simplification. METHODS: From 8 euthanized dogs, both femora were obtained and cubic specimens were cut from the centre of the femoral head which were oriented along the main pressure and tension trajectories. The specimens were tested using a 100 MHz ultrasound transducer in all three orthogonal directions. The directional elastic moduli of trabecular bone tissue and degrees of anisotropy were calculated. RESULTS: The elastic modulus along principal bone trajectories was found to be 11.2 GPa +/- 0.4, 10.5 +/- 2.1 GPa and 10.5 +/- 1.8 GPa, respectively. The mean density of the specimens was 1.40 +/- 0.09 g/cm3. The degrees of anisotropy revealed a significant inverse relationship with specimen densities. No significant differences were found between the elastic moduli in x, y and z directions, suggesting an effective isotropy of trabecular bone tissue in canine femoral heads. DISCUSSION: This study presents detailed data about elastic moduli of trabecular bone tissue obtained from canine femoral heads. Limitations of the study are the relatively small number of animals investigated and the measurement of whole specimen densities instead of trabecular bone densities which might lead to an underestimation of Young's moduli. Publications on elastic moduli of trabecular bone tissue present results that are similar to our data. CONCLUSION: This study provides data about directional elastic moduli and degrees of anisotropy of canine femoral head trabecular bone and might be useful for biomechanical modeling of proximal canine femora.

Animals↗