SEARCH · PubMed Health

Results for “Ti implants”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources

PubMed2004

Probing the reaction pathways of DL-proline on TiO2 (001) single crystal surfaces.

The reaction of DL-Proline on O2-annealed (stoichiometric) and O-defected (sub-stoichiometric) TiO2 (001) single-crystal surfaces has been investigated. This is of significance in trying to understand the concept of how biomolecules interact with the surfaces of biomedical implants (molecular recognition). On an O2-annealed TiO2 surface, proline is found to largely adsorb then desorb intact at approximately 350 K. DFT (B3LYP) calculations of proline bound to a Ti(OH)4 cluster suggest a binding through the carboxylate functional group rather than through the NH group of the ring. In contrast, proline reaction was considerably different on the O-defected surface. First, proline was further stabilized, evidenced by a shift of its desorption temperature (during temperature-programmed desorption) to approximately 530 K. Along with proline desorption, two distinctive sets of reaction processes occurred at 530 and 630 K, respectively. The first pathway (alpha) at 530 K shows desorption of large amounts of m/e 55 (attributed to 1-azetine) and m/e 42 (attributed to ketene). At still higher temperature, 630 K, a pathway (beta) dominated by the appearance of low masses, mainly m/e 28, 27, and 26, is seen. These masses are tentatively attributed to desorption of HCN, ethylene, and/or acetylene as they represent the logical further decomposition of the different fragments of proline.

Acetylene↗

PubMed1991

Hormonal regulation of rat granulosa cell deoxyribonucleic acid synthesis: effects of estrogens.

Although it is widely accepted that estrogens exert a major trophic effect on follicular growth, their mechanism of action has not been established. We examined the effect of estrogen treatment in vivo or in vitro on DNA synthesis in rat granulosa cells cultured under defined conditions (DMEM:F12, collagen-coated plastic wells). Treatment with diethylstilbestrol (DES) in vivo (silastic implants containing 5 mg DES) for at least 2 days was required to observe a significant stimulation of 3H-thymidine incorporation by insulin (1 microgram/ml) in culture. Rat thecal/interstitial cells (TI) were isolated from DES-treated rats and cultured under the same conditions as granulosa cells. Conditioned media from TI cells stimulated DNA synthesis in granulosa cell cultures (as much as twofold). This effect was markedly amplified by estradiol treatment (1 microgram/ml) of the TI cell cultures. Addition of estradiol to granulosa cell cultures enhanced the effect of conditioned medium from nontreated TI cells. Conditioned medium from estradiol-treated TI cells stimulated DNA synthesis in granulosa cells from both DES-treated and nontreated rats. Estradiol had no effect when added directly to purified granulosa cell cultures but stimulated 3H-thymidine incorporation in crude preparations of ovarian cells. The stimulatory effects of TI cell-conditioned medium and insulin were reflected in the final cell densities achieved after 9 days in culture. We conclude that the mitogenic actions of estrogens in the ovary involve sensitization of granulosa cells to locally present mitogens like insulin and a TI cell-derived growth factor.

Animals↗

PubMed2005

Metal ion levels after metal-on-metal proximal femoral replacements: a 30-year follow-up.

Metal-on-metal hip bearings are being implanted into younger patients. The consequence of elevated levels of potentially carcinogenic metal ions is therefore a cause for concern. We have determined the levels of cobalt (Co), chromium (Cr), titanium (Ti) and vanadium (Va) in the urine and whole blood of patients who had had metal-on-metal and metal-on-polyethylene articulations in situ for more than 30 years. We compared these with each other and with the levels for a control group of subjects. We found significantly elevated levels of whole blood Ti, Va and urinary Cr in all arthroplasty groups. The whole blood and urine levels of Co were grossly elevated, by a factor of 50 and 300 times respectively in patients with loose metal-on-metal articulations when compared with the control group. Stable metal-on-metal articulations showed much lower levels. Elevated levels of whole blood or urinary Co may be useful in identifying metal-on-metal articulations which are loose.

Adolescent↗

PubMed2006

In vitro assays for adhesion and migration of osteoblastic cells (Saos-2) on titanium surfaces.

The first event occurring at the boundary between a metal implant and living tissue is the attachment of cells onto the metal surface of the implant. The attachment characteristics of the metal in this situation are critical in determining its biocompatibility and usefulness as artificial bone and tooth implants. Using the human osteosarcoma cell line Saos-2, we attempted to establish simple and reliable methods for evaluating the attachment of cultured osteoblastic cells onto titanium samples that had been subjected to various surface treatments. Fluorescence actin imaging showed that cells cultured on titanium with hydrofluoric acid etching (HF-Ti) exhibited delayed spreading of their cytoplasm, as compared to cells cultured for the same length of time on nitrided titanium or physically polished titanium. The HF-Ti-cultured cells also exhibited poor assembly of focal contacts, as visualized by vinculin immunofluorescence. Furthermore, in motility assays based on an in vitro wound model, cells cultured on HF-Ti migrated more slowly than cells cultured on other titanium surfaces. These data suggest that Saos-2 cells attach less effectively to the HF-Ti surface. The methods described in this study should be useful for assessing the initial interactions of cultured cells with various materials, including metals.

Biocompatible Materials↗

PubMed2004

[Alterations in expression of F-actin and DNA of fluid shear stress treated-mesenchymal stem cells affected by titanium particles loading].

Particulate wear debris within the bone-prosthesis microenvironment generated by normal wear and corrosion of orthopaedic implants is considered to be one of the main factors responsible for chronic aseptic inflammation and development of osteolysis in the long-term instability and failure of total joint arthroplasty. While the decrease in bone volume caused by wear debris-induced osteolysis could have been compensated by enough new bone matrix secreted by osteoblasts. Actually, the normal osteoblastic population depend on the regular differentiation and proliferation of their progenitor cells--bone marrow mesenchymal stem cells (MSCs). This study aims to investigate the potential mechanism for the rat MSCs cytotoxicity upon exposure to Titanium (Ti) particles. Rat mesenchymal stem cells (rMSCs) isolated from 3-month-old male Sprague-Dawley rats by Percoll intensity gradient method were cultured in DMEM medium (low glucose) supplemented with 10% fetal bovine serum, 100 U/ml penicillin, and 100 micrograms/ml streptomycin in a humidified incubator with 5% CO2 at 37 degrees C. In order to gain the homogenous cell population, rMSCs were passaged to 3-4th subpassage which were used in all the experiment groups. Then rMSCs were seeded in the 6 well culture plates and exposed to three different circle diameters (mean size, TD1: 0.9 micron, TD2: 2.7 microns, TD3: 6.9 microns) with three different concentrations (0.1 wt%, 0.05 wt%, 0.01 wt%, W/V) at different durations (8 h, 16 h, 24 h,), respectively. Unexposed rMSCs were used as control. In the given periods of Ti loading, fluid shear stress (FSS) was applied to each group cells. The expression of F-actin and DNA of the rMSCs at the indicated time were determined with laser confocal scanning microscopy and image analysis software. The results showed that there was up-regulation expression of F-actin in the rMSCs without Ti particles loading but in the presence of FSS. Ti particles loading can suppress the expression of F-action and DNA of rMSCs, but this down-regulation response varied with the three circle diameter, concentrations and durations of Ti particles. Among three kinds of diametrically different Ti particles, submicron Ti particles (0.9 micron) had the greatest suppressive response on rMSCs, together with some apoptosis bodies. Under the same diameter condition, the inhibition induced by Ti particles loading was in a manner dependent on the particles concentration and exposure duration. The reductive effects produced from 0.1 wt% Ti was the greatest and earliest among the responses from Ti particles at three different concentrations; and the lower the concentration, the weaker the repressive influence. Furthermore, with the elongation of exposure to Ti particles, the expression of F-actin and DNA decreased gradually, the lowest level was at 32 h. These findings demonstrated that Ti particles loading can attenuate rMSCs' viability in a manner dependent on the circle diameter, particles concentration, treatment period, suggesting that a reduction in the number of viable MSCs together with a compromise of the their differentiation into functional osteoblast may exacerbate aseptic loosening of total joint implant. Further investigation into particles-mediated suppression of MCSs viability may reveal novel mechanism of implant loosening and aid in development and application of osteolytic drug therapy and the optimization of design and selection of future orthopaedic biomaterials, thereby improving long-term compatibility and stability for arthroplasty patients.

Actins↗

PubMed2000

Endometrial dating and determination of the window of implantation in healthy fertile women.

OBJECTIVE: To reassess endometrial morphological criteria of normality identifying the best morphological and molecular "implantation window" indicators in normal women. DESIGN: Prospective clinical study. SETTING: Assisted reproductive unit. PATIENT(S): Fourteen healthy volunteers. INTERVENTION(S): Blood sampling for LH, E(2), and progesterone (P4) determinations. Daily vaginal ultrasounds. Two endometrial biopsies per volunteer, 7 days apart, during luteal phase. MAIN OUTCOME MEASURE(S): Endometrial dating, pinopodes formation, immunohistochemical determination of integrins (alphavbeta3, alpha4beta1), leukemia inhibitory factor (LIF), interleukin-1 receptor type I (IL-1R tI), mouse ascites Golgi (MAG), the transmembrane mucin (MUC-1), and P4 receptor expression. RESULT(S): In 26 of 28 biopsies observers agreed; in two biopsies there was a discrepancy (difference of 72 hours). With use of LH peak, 24 of 26 samples were in phase, and 2 were 3 days behind. Pinopodes appeared on days 20-21 and persisted through day 28 in small groups or larger areas. beta3 Integrin was highly expressed in luminal and glandular epithelium from day 22 through 28; 48 hours thereafter pinopodes appeared. alpha4 Subunit exhibited luminal epithelium reaction positivity on days 22-23 and glands on days 18-23. LIF and IL-1R tI showed weak, erratic expression. MAG antibodies showed luminal epithelium expression up to day 22 and glands up to day 25. MUC-1 showed positivity during the whole luteal phase. P4 receptors were positive through day 20 and at the end of the luteal phase. CONCLUSION(S): The three most cited markers that frame the window of implantation do not correlate in our material. Pinopodes are present from day 20 on; beta3 and alpha4 integrin subunits indicate a window opening on days 22-23.

Adult↗

PubMedDate not supplied

Description and evaluation of a simplified method to achieve passive fit between cast titanium frameworks and implants.

Because osseointegrated implants have no resilience in bone, passive fit between dental implants and prosthetic superstructures has been identified, both from biologic and mechanical perspectives, as a potential discriminating prognostic factor. Distortion of the metal framework during the casting procedure has been cited as a main cause of misfit. The objectives of the present article were to describe a recently presented method (Cresco Ti Precision method) intended to correct for distortion in cast titanium frameworks, and to elucidate and evaluate the method by photoelastic and strain gauge techniques. The method appears to be an efficient and accurate procedure for correcting for distortion in cast titanium frameworks.

Dental Abutments↗

PubMed1992

Formation of focal contacts by osteoblasts cultured on orthopedic biomaterials.

The nature of the contact sites formed during the adhesion of osteoblasts to orthopedic implant materials was investigated by fluorescence microscopy. More specifically, the cytoskeletal organization of and the focal contact formation by neonatal rat calvarial osteoblasts attaching to and spreading on 316L stainless steel, Ti-6Al-4V, Co-Cr-Mo, Synamel (hydroxyapatite), alumina, and borosilicate glass were examined. Focal contacts are regions where the plasma membrane approaches the substrate to within 10-15 nm and where bundles of cytoskeletal microfilaments terminate. Fluorescent-labeling of F-actin-containing microfilaments demonstrated a typical sequence of events as rounded, suspended osteoblasts spread onto the substrates. Immunofluorescent-labeling of the protein vinculin, which is found at the cytoplasmic face of focal contacts, initially showed the formation of streak-like focal patches. On the biomaterials, the vinculin staining subsequently extended up and along, but ventral to, the microfilament bundles. The fibrillar patterns observed at later times may evidence the formation of extracellular matrix contacts.

Actin Cytoskeleton↗

PubMedDate not supplied

Direct current stimulation of titanium interbody fusion devices in primates.

BACKGROUND CONTEXT: The fusion rate for anterior lumbar interbody fusion (ALIF) varies widely with the use of different interbody devices and bone graft options. Adjunctive techniques such as electrical stimulation may improve the rate of bony fusion. PURPOSE: To determine if direct current (DC) electrical stimulation of a metallic interbody fusion device enhanced the incidence or extent of anterior bony fusion. STUDY DESIGN/SETTING: ALIF was performed using titanium alloy interbody fusion devices with and without adjunctive DC electrical stimulation in nonhuman primates. METHODS: ALIF was performed through an anterolateral approach in 35 macaques with autogenous bone graft and either a titanium alloy (Ti-6Al-4V) fusion device or femoral allograft ring. The fusion devices of 19 animals received high (current density 19.6 microA/cm2) or low (current density 5.4 microA/cm2) DC electrical stimulation using an implanted generator for a 12- or 26-week evaluation period. Fusion sites were studied using serial radiographs, computed tomography imaging, nondestructive mechanical testing and qualitative and semiquantitative histology. RESULTS: Fusion was achieved with the titanium fusion device and autogenous bone graft. At 12 weeks, the graft was consolidating and early to moderate bridging callus was observed in and around the device. By 26 weeks, the anterior callus formation was more advanced with increased evidence of bridging trabeculations and early bone remodeling. The callus formation was not as advanced or abundant for the allograft ring group. Histology revealed the spinal fusion device had an 86% incidence of bony fusion at 26 weeks compared with a 50% fusion rate for the allograft rings. DC electrical stimulation of the fusion device had a positive effect on anterior interbody fusion by increasing both the presence and extent of bony fusion in a current density-dependent manner. CONCLUSIONS: Adjunctive DC electrical stimulation of the fusion device improved the rate and extent of bony fusion compared with a nonstimulated device. The fusion device was equivalent to or better than the femoral allograft ring in all evaluations. The use of adjunctive direct current electrical stimulation may provide a means of improving anterior interbody fusion.

Alloys↗

PubMed1999

High-resolution morphometric analysis of human osteoblastic cell adhesion on clinically relevant orthopedic alloys.

Understanding the cellular basis of osteoblastic cell-biomaterial interaction is crucial to the analysis of the mechanism of osseointegration, a requirement of long-term orthopedic implant stability. Clinically, the amount of bone ingrowth is variable, and cellular parameters that influence ingrowth have yet to be clearly determined. In this study, two clinically relevant orthopedic alloys, titanium Ti6A14V (Ti) and cobalt-chrome-molybdenum (CC), were used for a comparative analysis of primary human osteoblastic cell adhesion and spreading, where cell adhesion represents the initial interaction between cellular elements and the biomaterial surface. The kinetic profile of adhesion revealed enhanced cell attachment upon rough Ti surfaces relative to rough CC. Using confocal laser scanning microscopy (CLSM), we observed that, during the first 12 h of contact with the substratum, osteoblastic cells were relatively less spread on rough Ti, whereas cells appeared elongated with multiple cellular extensions on rough CC. Focal adhesion contacts, as indicated by vinculin immunostaining, were distributed throughout the cells adhering to Ti, but were relatively sparse and localized to cellular processes on CC. Furthermore, three-dimensional CLSM reconstruction analysis indicated the presence of vinculin at all membrane-to-surface contact points on both Ti and CC. On Ti, these contact points closely followed the surface contour, whereas, on CC, they were restricted to relative topographic peaks only. Actin cytoskeletal reorganization was prominent in cells cultured on Ti, with stress fibers arranged throughout the cell body, whereas, on CC, actin filaments were sparse and localized primarily to cellular extensions. Because cell attachment mechanisms are likely to influence signal transduction and regulation of gene expression, these early differential responses of osteoblastic cells on Ti and CC may have functional implications on subsequent extracellular matrix mineralization and bone ingrowth at the cell-biomaterial interface.

Biocompatible Materials↗

PubMed1996

[The hip registry. Good economy for society].

As many as 33,656 total hip arthroplasties (THA) have been recorded in the Norwegian Arthtroplasty Register from the start in September 1987 until January 1994. The annual costs for the about 5,500 THA performed in Norway (4.2 million inhabitants) are 72 million USD. We have documented before that some types of uncemented prostheses (Ti-Fit/ Bio-Fit (cup/stem) and Coxa/Femora) and types of cements (low-viscosity and Boneloc) show higher revision rates than others do. In this paper the costs of these "inferior" implants are estimated. The "inferior" implants were compared with a reference-THA (the Charnley prosthesis with antibiotic-containing high viscosity cement and with systemic antibiotic-prophylaxis (n = 4,970)). In addition, based on data in the literature, comparisons have been made for two earlier commonly used prostheses in Norway: The Christiansen prosthesis (n = 6,500) and the Wagner double-cup prosthesis (n = 2,200). For the period 1987-93, the annual over-all extra cost of using other implants than the reference-THA was 1.71 mill. USD for the first 3-5 years postoperatively. For the Christiansen and the Wagner prostheses the annual extra costs were estimated to 2.65 and 2.38 mill. USD respectively. By documenting poor results early the Register helps to stop the use of the inferior prostheses and cements, and thus reduce both the number of revisions, and, most important, the suffering of the patients.

Costs and Cost Analysis↗

PubMed2003

Effects of transforming growth factor-beta 1 (TGF-beta1) on in vitro mineralization of human osteoblasts on implant materials.

An in vitro cell-implant mineralization model system was used to study the effect of transforming growth factor-beta 1(TGF-beta1) on mineralization in human osteoblast cultures. SaOs-2 and primary human osteoblast (HOB) cells were cultured on Tivanium (Ti-6Al-4V) disks. Administration of different concentrations of TGF-beta1 (0.02, 0.01, 0.2, 1.0, 2.0ng/ml) to these cultures demonstrated a biphasic dose response with 0.2ng/ml TGF-beta1 maximally increasing the calcium content compared to control culture. Results with SaOs-2 and HOB cultures were similar. An optimal dose of TGF-beta1 (0.2ng/ml) was provided to the cultures either in one single dose or multiple doses. Continuous administration of 0.2ng/ml TGF-beta1 caused 77% (SaOs-2) and 60% (HOB) increases in calcification compared to the control and 0.2ng/ml single dose groups. Single administration of the accumulative dose at 1.6ng/ml had no significant effect on the calcium content in either cell culture compared to control. Two weeks continuous administration of 0.2ng/ml TGF-beta1 in both cell cultures resulted in significant increases in the expression of bone specific extracellular matrix proteins which included alkaline phosphatase, Type I collagen, and osteocalcin as measured by Northern blot analysis and RT-PCR. At 4 weeks, the mRNA level of Type I collagen was still significantly higher in the TGF-beta1 treatment group compared to control. In conclusion, TGF-beta1 enhances mineralization of HOB on implant materials.

Alkaline Phosphatase↗

PubMed2004

The initial attachment and subsequent behavior of osteoblastic cells and oral epithelial cells on titanium.

The interaction between implant materials and bone cells or oral epithelial (OE) cells contributes to the clinical success of dental implants. The functional activity of cells in contact with an implant is determined by its surface properties. Before cells attach, extracellular matrix (ECM) in the serum deposits on the substrate; rounded cells then attach and spread upon it. Cells form focal adhesions and polarize, then start to migrate or proliferate to form colonies. Comparison of the attachment and behavior of osteoblastic cells on titanium (Ti) and hydroxyapatite (HA) revealed that more cells attached on HA and that these spread more rapidly than on Ti. In contrast, cells did not form good stress fibers or vinculin-positive focal adhesions on HA, whereas the cells on Ti possessed well-defined and polarized stress fibers. The initial attachment of OE cells to Ti was inferior to that on polystyrene culture dish or glass, and the OE cell migration area, indicated by the deposition of LN5, was smaller on Ti than on the other materials. This review summarizes data on the attachment and behavior of osteoblastic cells and OE cells on biomaterials, which may suggest future improvements in surface properties.

Animals↗

PubMed1989

Titanium-hydrogen peroxide interaction: model studies of the influence of the inflammatory response on titanium implants.

In vitro studies of titanium and TiO2 as well as other metals were carried out to investigate the role of these metals in the inflammatory response through the Fenton reaction. The TiOOH matrix formed traps the superoxide radical, so that no or very small amounts of free hydroxyl radicals are produced. Ellipsometry and spin trapping with spectrophotometry and electron spin resonance (ESR) were used to study the interaction between Ti and H2O2. Spectrophotometry results indicated that Ti, Zr, Au and Al are low free OH-radical producers. We propose a new model for the titanium-tissue interface where the oxidized titanium surface is covered with a hydrated TiOOH matrix after the inflammatory reaction. This matrix is suggested to possess good ion exchange properties, and extracellular components may interact with the Ti(IV)-H2O2 compound before matrix formation. The TiOOH matrix is formed when the H2O2 coordinated to the Ti(IV)-H2O2 complex is decomposed to water and oxygen. Superoxide (O2-) may be bound therein. The oxide layer initially present may be partly reformed to a TiOOH matrix due to the interaction with hydrogen peroxide.

Biocompatible Materials↗

PubMed1997

In vivo light transmission spectra in EMT6/Ed murine tumors and Dunning R3327 rat prostate tumors during photodynamic therapy.

BACKGROUND AND OBJECTIVE: Variations in the optical coefficients in tissue and the photosensitizer during photodynamic therapy (PDT) will require adjustment of the light dose during the course of therapy. We have studied the dynamics using light transmission spectra for two different tumor models when tetrasulfonated aluminum phthalocyanine (AlPcS4) was used as photosensitizer. STUDY DESIGN/MATERIALS AND METHODS: Spectra were measured noninvasively in the EMT6/Ed murine tumor model, and with interstitially implanted source and probe fibers in the Dunning R3327-AT rat tumor model. Measurements were performed in the range 600-840 nm, using a tunable dye laser, a diode laser, and a Ti:Sapphire laser. AlPcS4 has absorption in the range 600-700 nm with an absorption peak at 670 nm in saline. RESULTS: The in vivo spectrum of AlPcS4 both in the EMT6/Ed tumor model and the Dunning R3327-AT tumor model differs from the spectrum of AlPcS4 in saline. The absorption at 670 nm was reduced, whereas the absorption at 640 nm increased. Exposure of phototherapeutic levels of light caused reduced light absorption by the photosensitizer and further spectral shift. CONCLUSION: We found that the AIPcS4 absorption spectrum changes in a biological environment, and we also observed increased light transmission at the treatment wavelength during PDT in both tumor models. Instability in the absorption spectrum of the photosensitizer may influence the effectiveness of PDT.

Animals↗

PubMed1996

Effects of titanium on transcriptional and post-transcriptional regulation of fibronectin in human fibroblasts.

The effects of commercially pure titanium (Ti) on the regulation of fibronectin gene expression and synthesis were investigated in early-passage human gingival fibroblasts. The fibroblasts were cultured on 50 nm Ti-coated silicon wafers treated with radio-frequency glow discharge prior to use and on Falcon tissue culture plastic (TCP) dishes as a control. Northern hybridization analysis revealed that fibroblasts cultured on Ti reduced the fibronectin mRNA level by 58% at 16 h, but increased it by 2.6-fold at 90 h, although the cell numbers and house-keeping gene GAPD mRNA levels on these two surfaces were essentially the same. The amount of total RNA was slightly less on the Ti surface. While the total [35S]methionine incorporation was essentially unaltered, the amount of [35S]methionine-labeled fibronectin was significantly increased in cells cultured on a Ti surface in early cultures but decreased in the late cultures. The apparent discrepancy between the increased fibronectin mRNA levels and decreased translation could be explained by a 30% reduction in fibronectin mRNA half life in cells cultured on Ti. The distribution of fibronectin between the medium and the cell layer also was altered on Ti surfaces, with a approximately 100-fold increase of fibronectin assembled in extracellular matrix at 16 h, but a 36% reduction at 90 h. In contrast, the amount of fibronectin recovered in the medium was essentially unchanged. The total amount of protein assembled into the extracellular matrix by cells on Ti increased 2.1-fold at 16 h but decreased by 19% in 90-h cultures. These significant changes in fibronectin gene activity and gene product distribution by cells cultured on Ti surfaces demonstrate that the surface chemistry of biomaterials can selectively regulate the cellular behavior at the molecular level and, conversely, that molecular biological techniques provide sensitive indicators of the molecular biocompatibility of implant materials.

Adult↗

PubMed2005

Differential regulation of osteoblasts by substrate microstructural features.

Microtextured titanium implant surfaces enhance bone formation in vivo and osteoblast phenotypic expression in vitro, but the mechanisms are not understood. To determine the roles of specific microarchitectural features in modulating osteoblast behavior, we used Ti surfaces prepared by electrochemical micromachining as substrates for MG63 osteoblast-like cell culture. Cell response was compared to tissue culture plastic, a sand-blasted with large grit and acid-etched surface with defined mixed microtopography (SLA), polished Ti surfaces, and polished surfaces electrochemically machined through a photoresist pattern to produce cavities with 100, 30 and 10 microm diameters arranged so that the ratio of the microscopic-scale area of the cavities versus the microscopic-scale area of the flat region between the cavities was equal to 1 or 6. Microstructured disks were acid-etched, producing overall sub-micron-scale roughness (Ra=0.7 microm). Cell number, differentiation (alkaline phosphatase; osteocalcin) and local factor levels (TGF-beta1; PGE(2)) varied with microarchitecture. 100 microm cavities favored osteoblast attachment and growth, the sub-micron-scale etch enhanced differentiation and TGF-beta1 production, whereas PGE(2) depended on cavity dimensions but not the sub-micron-scale roughness.

Biocompatible Materials↗

PubMed2006

Effects of molecular weight and surface functionalization on surface composition and cell adhesion to Hyaluronan coated titanium.

This paper describes the effect of surface functionalization on surface composition and cell adhesion to titanium samples by high and low molecular weight Hyaluronan (HA). HA was covalently linked to aminated Ti surfaces obtained by two different surface functionalization techniques, that is polyethyleneimine (PEI) adsorption and deposition from allylamine plasma. The two approaches yield very different surface densities of available amino groups, affecting this way the number and frequency of surface-HA bonds and the configurational freedom of the latter. Results of cell adhesion test are dependent on the surface functionalization approach adopted, low molecular weight HA coupled to PEI functionalized Ti does not yield the same degree of resistance to cell adhesion found on other samples. These results indicate that the details of the surface functionalization step are crucial for surface engineering of implant devices by biological molecules.

Allylamine↗