SEARCH · PubMed Health

Results for “Tablets”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources

PubMed2001

The use of mercury porosimetry in assessing the effect of different binders on the pore structure and bonding properties of tablets.

This study investigated the effect of binders with different deformability characteristics on the pore structure of tablets composed of binary mixtures. The pore structure was evaluated using mercury porosimetry. The pore size distribution in tablets of both individual components and binary mixtures indicated that the pores in pure binder tablets appeared not to exist to the same degree in composed tablets and were therefore unlikely to substantially contribute to the pore structure. It is therefore suggested that, because the binder undergoes extensive deformation and shearing during compaction, it will exist as relatively small lumps or aggregates or even primary particles that are located between the compound particles. Most of the pores in the binary tablets studied were thus found between particles of the compound and the binder phase. The most deformable binder, polyethylene glycol 3000, had the greatest effect on pore structure, reflected in the greatest increase in tablet strength. An attempt was also made to use mercury porosimetry data to qualitatively assess the effect of a binder on the dominating bond types in a tablet. The results indicated that addition of a binder caused a decrease in the probability of forming solid bridges.

Mercury↗

PubMed2003

Stability of fludrocortisone acetate solutions prepared from tablets and powder.

To assess the stability of fludrocortisone acetate oral solutions prepared from tablets and powder at three temperatures over a 60-days period. Solutions of fludrocortisone acetate 40 microg/ml were prepared from commercially available 0.05-mg tablets and powder in ethanol 17% v/v. They stored in an amber glass prescription bottles at +4, +23 and +40 degrees C shielded from light. The concentrations of fludrocortisone acetate were determined in duplicate by high-performance liquid chromatography at 0, 1, 7, 14, 30, 50 and 60 days. The initial and final pH of solutions were compared. The recovery of fludrocortisone acetate from tablets was determined. The times (t(90)) needed for fludrocortisone acetate to fall to 90% of it's initial concentration were calculated by a linear regression analysis to allow the determination of the expired dates. The recovery of fludrocortisone acetate from tablets was 78 +/- 3%. The t(90) expressed with 95% confidence limits were 2 +/- 1 and 22 +/- 3 days for the solutions prepared from tablets and stored at +23 and +4 degrees C, respectively, whereas t(90) were 11 +/- 2 days and at least 60 days for the solutions prepared with the powder and stored at +23 and +4 degrees C, respectively. No color or odour changes were observed during the study period. The initial pH of the solutions prepared from tablets and powder were 7.7 and 6.9, respectively. No change of pH values was observed at the end of the 60 days. Significant degradation of fludrocortisone acetate occurred in formulations stored at +23 degrees C. Fludrocortisone acetate 40 microg/ml solutions prepared from tablets and powder were stable 19 days and at least 60 days, respectively, when stored at +4 degrees C. The solution prepared from powder is the best in term of stability and final concentration which is independent on the fludrocortisone acetate recovery.

Anti-Inflammatory Agents↗

PubMed1999

Investigation of the pellet-distribution in single tablets via image analysis.

The influence of five different microcrystalline cellulose filler-binders on the pellet-distribution in tablets was investigated under production-scale conditions. Coloured coated pellets were tableted on an instrumented high speed rotary tablet press at four machine speed levels. The pellet-distribution on the upper and the lower tablet surfaces was detected via image analysis and correlated with the disintegration time and the crushing strength of the tablets. Filler-binders with a large surface area and a fibrous texture, like Avicel PH 101, enable the production of disintegrating tablets with an approximately homogeneous pellet-distribution within a large range of machine speeds, while pellet-containing tablets prepared with coarse microcrystalline cellulose granules showed an inhomogeneous pellet-distribution, depending on machine speed.

Compressive Strength↗

PubMed1999

The use of carrageenan in mixture with microcrystalline cellulose and its functionality for making tablets.

The modulation of tableting and release behavior of combinations of kappa-carrageenan Gelcarin((R)) GP 911 NF and microcrystalline cellulose (MCC) Avicel((R)) PH 101 has been evaluated. Graded binary mixtures were tableted to a maximum relative density of 0.850 at the maximum displacement of the upper punch. Additionally, ternary mixtures with the same ratios of kappa-carrageenan and MCC and a constant percentage of theophylline monohydrate (20% (v/v)) were tested for their release behavior. Tablets produced from pure kappa-carrageenan deformed more elastically than pure MCC, the tablets produced were stable but not at the same degree as those made from MCC. Scanning electron microscopy (SEM) pictures showed that for MCC a smooth surface of the tablets resulted, tablets made from kappa-carrageenan showed less 'fusion' and thus more mechanical interlocking is responsible for their stability. Binary mixtures showed a continuous change in compaction properties from plastic to elastic deformation. All ternary mixtures with theophylline deformed more plastically than the binary mixtures, the change in deformation properties remained the same. Theophylline reduced the crushing strength due to its different fracture properties. The ternary mixtures showed different release mechanisms: Fast release up to 20% (v/v) kappa-carrageenan, slower release starting from 30% (v/v). The kinetics of release tended at 70% (v/v) more clearly towards zero-order kinetics. This change in release is in accordance with a change in swelling of tablets made of the binary mixtures.

Algorithms↗

PubMed1991

Quantitative analysis of the active tablet ingredient by powder X-ray diffractometry.

A powder X-ray diffraction technique has been developed for the quantitative analysis of the active ingredient in intact tablets. Two model drugs were used: lithium carbonate (LC) and carbamazepine (CBZ). Mixtures containing various weight fractions of each drug and microcrystalline cellulose were compressed into tablets and the integrated intensities of several diffraction lines of each were used for quantitative purposes. The ratio of the integrated intensity of these lines in tablets, made from mixtures of drug and microcrystalline cellulose, to the intensity of the same lines in tablets made from only drug was calculated as a function of the weight fraction of the drug in the mixture. These ratios were also experimentally determined and the relative error in the determination of LC was less than 12%. CBZ tablets containing starch were also prepared. In the CBZ tablets containing microcrystalline cellulose or starch, the relative error in the determination of CBZ was less than 10% only when the weight fraction of CBZ in the tablets was greater than or equal to 0.4.

Antiviral Agents↗

PubMed1991

Formulation, bioavailability, and pharmacokinetics of sustained-release potassium chloride tablets.

The release of potassium chloride incorporated into hydrogenated vegetable oil and hydroxypropyl methylcellulose matrix tablets was studied in vitro. The formulations containing 20% hydrogenated vegetable oil and hydroxypropyl methylcellulose showed a sustained-release profile comparable to that of a standard commercially available sustained-release preparation, containing 8 mEq potassium chloride embedded in a wax material. The formulated and standard sustained-release potassium chloride tablets were compared to a conventional enteric-coated potassium chloride tablet in 10 healthy subjects. Mean recoveries in 24-hr urine potassium levels from four dosage forms (after subtracting normal urine potassium excretion levels) were 76 +/- 32% from hydroxypropyl methylcellulose, 95 +/- 22% from hydrogenated vegetable oil-incorporated matrix tablets, 91 +/- 29% from commercially available sustained-release tablets, and 97 +/- 13% from enteric-coated tablets. There was no significant difference (P greater than 0.05) in the time to reach maximum excretion rates among the three sustained-release tablets. No significant adverse effect was experienced with any of the preparations.

Adult↗

PubMed1993

Evaluation of moisture sorption by tablet cores containing superdisintegrants during the aqueous film coating process.

A physical-chemical analysis of the extent of sorption of water by tablets containing superdisintegrants was carried out following the aqueous film coating of formulated tablets. Characterization of the uncoated and coated tablet properties was conducted using thermogravimetric analysis, differential scanning calorimetry, mercury intrusion porosimetry, and measurement of the tablet tensile strength. Tablet residual moisture content, pore system characteristics, tensile strength, and glass transition temperature of the amorphous polymer components of the tablet matrix were significantly affected after the coating operation. These findings were attributed to the penetration of water from the aqueous film coating solution into the tablet matrix.

Absorption↗

PubMed2004

Use of glancing angle X-ray powder diffractometry to depth-profile phase transformations during dissolution of indomethacin and theophylline tablets.

PURPOSE: The purpose of this study was (i) to develop glancing angle x-ray powder diffractometry (XRD) as a method for profiling phase transformations as a function of tablet depth; and (ii) to apply this technique to (a) study indomethacin crystallization during dissolution of partially amorphous indomethacin tablets and to (b) profile anhydrate --> hydrate transformations during dissolution of theophylline tablets. METHODS: The intrinsic dissolution rates of indomethacin and theophylline were determined after different pharmaceutical processing steps. Phase transformations during dissolution were evaluated by various techniques. Transformation in the bulk and on the tablet surface was characterized by conventional XRD and scanning electron microscopy, respectively. Glancing angle XRD enabled us to profile these transformations as a function of depth from the tablet surface. RESULTS: Pharmaceutical processing resulted in a decrease in crystallinity of both indomethacin and theophylline. When placed in contact with the dissolution medium, while indomethacin recrystallized, theophylline anhydrate rapidly converted to theophylline monohydrate. Due to intimate contact with the dissolution medium, drug transformation occurred to a greater extent at or near the tablet surface. Glancing angle XRD enabled us to depth profile the extent of phase transformations as a function of the distance from the tablet surface. The processed sample (both indomethacin and theophylline) transformed more rapidly than did the corresponding unprocessed drug. Several challenges associated with the glancing angle technique, that is, the effects of sorbed water, phase transformations during the experimental timescale, and the influence of phase transformation on penetration depth, were addressed. CONCLUSIONS: Increased solubility, and consequently dissolution rate, is one of the potential advantages of metastable phases. This advantage is negated if, during dissolution, the metastable to stable transformation rate >> dissolution rate. Glancing angle XRD enabled us to quantify and thereby profile phase transformations as a function of compact depth. The technique has potential utility in monitoring surface reactions, both chemical decomposition and physical transformations, in pharmaceutical systems.

Drug Stability↗

PubMed2005

In vitro and in vivo equivalence studies of alendronate monosodium tablets.

OBJECTIVE: The aim of this study was to test the bioequivalence of two alendronate tablets (CAS 121268-17-5; Marvil 10 and Marvil 70 as test formulations, in short "test"; reference formulation, in short "reference") in vitro and in vivo in healthy adult male subjects and to describe a mode for researching the bisphosphonate oral formulation pharmaceutical quality. METHODS: Two dissolution tests with 10-mg and 70-mg alendronate tablets, a preliminary clinical test with 10-mg tablets (n = 10) and a bioequivalence study with 70-mg tablets (n = 23) were performed. Clinical studies were single-dose, open, cross-over, randomized, including a four-week wash-out period. Alendronate was assessed by HPLC in urine after 6 (UE6) and 24 (UE24) h post-intake. In all the experiments the reference was the one that had proved efficacy and safety in international regulatory clinical trials. RESULTS: The dissolution test showed a comparable release profile between reference and test, of both, the 10-mg and 70-mg tablet, the difference (f1) and similarity (f2) factors being within the acceptance values. The clinical trials showed great variability in urinary recovery, from one third the average figure up to 2-3 fold. The amount recovered with the 70-mg tablet was 11-15 fold higher than with the 10-mg tablets, suggesting higher (test/reference) was found to be 72-122% for UE24, and when analyzed in individuals with apparent steady bone metabolism during the wash-out period (n = 19), it was 86-137%. Both margins are considered acceptable in view of the particular kinetic and dynamic features of bisphosphonates, their very high inter- and intra-individual variability, extremely low absorption, time-changeable bone compartment, high margin of safety and long-term achievable therapeutic benefits. CONCLUSION: Test is bioequivalent to reference.

Alendronate↗

PubMed2001

Allicin release under simulated gastrointestinal conditions from garlic powder tablets employed in clinical trials on serum cholesterol.

The failure of five recent clinical trials to show significant reduction in elevated serum cholesterol by a single brand of allicin-standardized garlic powder tablets is in contrast to many prior positive studies with the same brand. The hypocholesterolemic activity of garlic is mainly due to allicin, a compound that is produced by the acid-sensitive garlic enzyme, alliinase, only after tablet consumption. Therefore, the allicin-releasing ability of ten lots of these tablets--manufactured over the same years that the positive and negative clinical trials were conducted (1989-1997)--was determined under simulated gastrointestinal dissolution conditions, as defined by U.S. Pharmacopeia Method 724A. It was found that the older lots were more resistant to acid-disintegration (2.5 h vs. 1.3 h, P < 0.001) and that they released three times as much allicin (44% vs. 15 % of their potential, P < 0.001) as the newer lots. A second brand of tablets employed in a recent negative trial released no detectable amount of allicin, while a third set of tablets with high allicin release was used in a trial that gave positive effects. Hence, the persons involved in the recent negative clinical trials probably received considerably less allicin than did those in the older positive studies, possibly accounting for much of the discrepancy in the outcomes. In conclusion, clinical trials using garlic powder tablets to assess any effect of garlic that might be related to allicin, as most are, cannot be considered valid for garlic when the trial shows no effect, unless the expected allicin release from the tablets has at least been determined under standardized drug release conditions (USP 724A).

Cholesterol↗

PubMed2005

Influence of compacted hydrophobic and hydrophilic colloidal silicon dioxide on tableting properties of pharmaceutical excipients.

The effect of noncompacted and compacted hydrophilic as well as hydrophobic colloidal silicon dioxide (CSD) on tableting properties of three different pharmaceutical excipients used for direct compression, namely, Avicel PH 101, Starch 1500, and Tablettose 80, was investigated. Binary powder mixtures containing 0.5% CSD and 99.5% excipient were compressed on an instrumented single-punch tablet press, and the radial tensile strength/compaction load profiles were examined. The Ryshkewitch-Duckworth relationship shows that the influence of CSD on tablet strength was dependent on the hydrophobic and hydrophilic nature of the CSD and on the compaction characteristics of the excipients. Tablets from each excipient with and without CSDs were subjected to different levels of relative humidity at 20 degrees C for 7 days. The sorption isotherms and the radial tensile strengths of the tablets after the storage period showed that neither hydrophilic nor hydrophobic CSD influenced the tablet properties of Avicel PH 101, Starch 1500, and Tablettose 80. Moreover, ternary powder mixtures containing magnesium stearate as a third component were compressed in order to study the influence of CSD on the deleterious effect of magnesium stearate on the interparticle bonding. The radial tensile strength/compaction load profiles and the residual and ejection forces of tablets made from ternary mixtures showed that CSD eliminated the negative effect of magnesium stearate on interparticle bonding while maintaining the lubrication action, in a manner that was affected by its hydrophobicity/hydrophilicity and by the particle deformation properties of the excipient upon compression.

Cellulose↗

PubMed2006

Effects of pigeon pea and plantain starches on the compressional, mechanical, and disintegration properties of paracetamol tablets.

A study has been made of the effects of pigeon pea starch obtained from the plant Cajanus cajan (L) Millisp. (family Fabaceae) and plantain starch obtained from the unripe fruit of Musa paradisiaca L. (family Musaceae) on the compressional, mechanical, and disintegration properties of paracetamol tablets in comparison with official corn starch BP. Analysis of compressional properties was done by using density measurements, and the Heckel and Kawakita equations, whereas the mechanical properties of the tablets were evaluated by using tensile strength (T--a measure of bond strength) and brittle fracture index (BFI--a measure of lamination tendency). The ranking for the mean yield pressure, P(y), for the formulations containing the different starches was generally corn < pigeon pea < plantain starch while the ranking for P(k), an inverse measure of the amount of plasticity, was pigeon pea < plantain < corn starch, which indicated that formulations containing corn starch generally exhibited the fastest onset of plastic deformation, whereas those formulations containing pigeon pea starch exhibited the highest amount of plastic deformation during tableting. The tensile strength of the tablets increased with increase in concentration of the starches while the Brittle Fracture Index decreased. The ranking for T was pigeon pea > plantain > corn starch while the ranking for BFI was corn > plantain > pigeon pea starch. The bonding capacity of the formulations was in general agreement with the tensile strength results. The disintegration time (DT) of the formulation increased with concentration of plantain and corn starches but decreased with concentration of pigeon pea starch. The general ranking of DT values was plantain < pigeon pea < corn starch. Notably, formulations containing pigeon pea starch exhibited the highest bond strength and lowest brittleness, suggesting the usefulness of pigeon pea starch in producing strong tablets with minimal lamination tendency. Plantain starch, on the other hand, would be more useful where faster disintegration of tablet is desired. The results show that the starches could be useful in various formulations depending on the intended use of the tablets with the implication that the experimental starches can be developed for commercial purposes.

Acetaminophen↗

PubMedDate not supplied

Design and fungicidal activity of mucoadhesive lactoferrin tablets for the treatment of oropharyngeal candidosis.

Lactoferrin (Lf) is a potential drug candidate for the treatment of oropharyngeal Candida infections. However, for an effective therapeutic treatment an appropriate dosage form is required. Therefore a mucoadhesive tablet for buccal application was developed. Tablets of sufficient strength could be produced on high speed tabletting machines, but they could only be obtained when the protein contained at least 7% moisture. The tablet contained sodium alginate both for its release-controlling properties as well as for its mucoadhesive properties. Furthermore, phosphate buffer was added to keep the pH of the saliva in the mouth within the range of 6.5 to 7.5. In this pH range, Lf has shown to have its highest activity against Candida growth inhibition. The tablet formulation containing Lf had the same antifungal properties as compared with Lf alone, because in most cases identical inhibitory concentrations were observed against several clinical isolates of Candida albicans and Candida glabrata. In human volunteers the tablets, containing 250 mg Lf and placed in each pouch, were able to keep the Lf concentration in the saliva at effective levels for at least 2 hr, while the pH of the saliva remained within the desired range. We concluded that the developed mucoadhesive tablet can improve the therapeutic efficacy of Lf and that it is suitable for further clinical research.

Adhesiveness↗

PubMedDate not supplied

Use of natural gums and cellulose derivatives in production of sustained release metoprolol tablets.

Metoprolol tartrate sustained-release tablets (100 mg) were prepared using xanthan/guar gums and also hydroxypropyl methyl cellulose (HPMC) carboxymethyl-Cellulose (CMC) polymers by direct compression method. Physical characteristics of the tablets and water uptake in addition to their dissolution profiles were compared with standard (Lopressor SR) tablets. Dissolution test was performed in the phosphate buffer solution (pH 6.8) and the samples were analyzed spectrophotometerically in 275.7 nm. Dissolution studies showed that formulations containing 100 and 80% of HPMC, 100% of guar, and 20% of xanthan followed the Higuchi model, while those containing 60 and 40% HPMC and 100 and 80% xanthan followed a zero-order model. The tablets with 40% xanthen followed a Hixon-Crowell model. In cellulose derivatives the highest MDT and dissolution efficiency until 8 hr (DE8%) belonged to tablets with 40% HPMC, increasing the amount of CMC decreased the drug release rate, and formulations containing 60 and 40% of HPMC had the USP dissolution standards. While, in the gum formulations, the highest mean dissolution time and the lowest DE(8)% belonged to tablets with 100% xanthan, increasing the xanthan decreased the release rate of metoprolol, and formulations containing 80 and 100% xanthan had the USP dissolution standards. Results showed that natural gums are suitable for production of sustained-release tablets of metoprolol.

Adrenergic beta-Antagonists↗

PubMed1999

Influence of pigment concentration and particle size on adhesion of an acrylic resin copolymer to tablet compacts.

The effects of the particle size and the concentration of pigments in aqueous polymeric dispersions on the adhesive properties of an acrylic resin copolymer were investigated. Aqueous polymeric dispersions containing up to 20% (v/v) pigment were coated onto hydrophilic and hydrophobic tablet compacts, and polymer adhesion was assessed using a novel butt adhesion technique. An inverse relationship was found between the particle size of the pigment present in the aqueous polymeric dispersion and film-tablet adhesion. As the particle size of the pigment increased, the adhesive strength of the polymer to the tablet compact decreased. Increased concentrations of the opacifying agent titanium dioxide in the acrylic dispersion resulted in stronger film-tablet adhesion. No clear relationship could be established between the wettability of the tablet compact by the pigmented polymeric dispersion and the strength of film-tablet adhesion. The hydrophobicity of the tablet compact was found to affect the glass transition temperature of the polymeric film to a greater extent than the particle size, morphology, or concentration of the pigment incorporated into the acrylic dispersion.

Acrylic Resins↗

PubMed1999

Effects of hydrophilic excipients and compression pressure on physical properties and release behavior of aspirin-tableted microcapsules.

Aspirin ethylcellulose microcapsules were tableted by compression with or without excipients (lactose or polyvinylpyrrolidone [PVP]). The effects of the amount of the excipients and microcapsule size on the crushing strength and release rate of aspirin from tableted microcapsules were investigated. Tablets without excipients had a crushing strength that was independent of the applied pressure and microcapsule size. An increase in compression pressure from 15 to 60 MPa resulted in an increase in the crushing strength of tablets containing 20% or 40% w/w lactose, but the reverse results were obtained for the tableted microcapsules containing 20% or 40% w/w PVP. Results showed that the release rate of aspirin from microcapsules containing lactose or PVP was independent of the compression pressure with the exception of tablets containing 40% w/w lactose. In vitro release profiles of aspirin from tableted microcapsules containing lactose or PVP showed that increasing the concentration of the excipients resulted in an increase in the release rate of aspirin. Values of n were changed by the compression pressure and the added excipients.

Aspirin↗

PubMed2002

Characterization of khaya gum as a binder in a paracetamol tablet formulation.

The influence of khaya gum, a binding agent obtained from Khaya grandifolia (Meliaceae family), on the bulk, compressional, and tabletting characteristics of a paracetamol tablet formulation was studied in comparison with the effects of two standard binders: polyvinylpyrrolidone (PVP; molecular weight 40,000) and gelatin. The relative ability of khaya gum to destroy any residual microbial contamination in the binder or in the formulation during tabletting was also studied using Bacillus subtilis spores as a model. Formulations containing khaya gum exhibited more densification than formulations containing PVP and gelatin during die filling, but less densification due to rearrangement at low pressures. The mean yield pressure of the formulation particles obtained from Heckel plots, and another pressure term, also inversely related to plasticity, obtained from Kawakita plots, showed dependence on the nature and concentration of the binder, with formulations containing khaya gum exhibiting the lowest and highest values respectively. The values of the pressure terms suggest that the yield pressure relates to the onset of plastic deformation during compression, while the Kawakita pressure relates to the total amount of plastic deformation occurring during the compression process. Tablets made from formulations containing khaya gum had the lowest tensile strength values but also the lowest tendency to laminate or cap, as indicated by their lowest brittleness. All the tablets had friability values < 1% at higher concentrations of the three binders. In addition, khaya gum demonstrated a comparable ability to destroy microorganisms in the formulation during tabletting as the two binders. The characterization of the formulations suggests that khaya gum can be developed into a commercial binding agent for particular tablets.

Acetaminophen↗

PubMed2002

Effect of heat on characteristics of chitosan film coated on theophylline tablets.

The effect of heat on the characteristics of chitosan film coated on theophylline tablets was studied. Chitosan of high viscosity grade with molecular weight in the range of 800,000-1,000,000, 80-85% degree of deacetylation was used as a film former by dissolving in 1% v/v acetic acid solution. The coated tablets had been cured at 40, 60, and 100 degrees C for 6, 12, and 24 hr. The morphology of the film at the edge and surface of coated tablets was investigated using scanning electron microscopy. Film cracking was increased and clearly observed in the coated tablets cured at 100 degrees C for 24 hr. As a result, more water could be absorbed into the tablets, followed by faster disintegration and faster drug release. The evidence of partial conversion of chitosonium acetate to chitin in the 13C nuclear magnetic resonance (NMR) spectra of chitosan films cured at 40, 60, and 100 degrees C was observed, but it had no effect on drug release behavior. Theophylline tablets coated with chitosan films gave sustained release behavior in various media, i.e., distilled water, 0.1 N hydrochloric acid, pH 4.5 acetate buffer, and pH 6.8 phosphate buffer. In addition, the film coating temperature at 55-60 degrees C and curing process at 40 and 60 degrees C had no effect on the drug release from theophylline tablets coated with chitosan polymer. Finally, it might be concluded that both the physical and chemical properties of chitosan films were affected by heat.

Biopolymers↗