SEARCH · PubMed Health

Results for “Humidity”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources

PubMed2006

Impact of humidity on the ozone initiated oxidation of limonene, delta3-carene, and alpha-pinene.

The effect of water on the initial secondary organic aerosol (SOA) formation from gas-phase ozonolysis of limonene, delta3-carene, and alpha-pinene (-3 and approximately 1.5 x 10(11) molecule cm(-3) reacted) has been investigated in a flow reactor at controlled relative humidity (RH), temperature (298 +/- 0.4 K), and reaction time (270 +/- 2 s). Low amounts of terpene converted minimize the impact of secondary reactions. A comparison of the SOA formation from the three terpenes was made for initial rate of reactions being around 7.5 x 10(8) and 15 x 10(8) molecule cm(-3) s(-1). The most efficient species in producing SOA was limonene, while alpha-pinene was the least efficient. The results showed that an enhancement in water vapor concentration (<2-85% RH) caused an increase in both integrated mass (M10-300nm) and total number (N10-300nm). The effect on number and mass were a factor of 2-3 and 4-8, respectively. Physical water up-take can partly explain the increase in mass, but not the observed increase in number. Therefore it was concluded that the increase in water concentration must, by a gas-phase reaction, produce more low volatility product(s).

Air Pollutants↗

PubMed2006

Responses of ammonium sulfate particles coated with glutaric acid to cyclic changes in relative humidity: hygroscopicity and Raman characterization.

Atmospheric particles, which may have an organic coating, exhibit cyclical phase changes of deliquescence and crystallization in response to changes in the ambient relative humidity(RH). Here, we measured the hygroscopicity and Raman spectra of solid ammonium sulfate ((NH4)2SO4) particles initially coated with water-soluble glutaric acid in two consecutive cycles of deliquescence and crystallization utilizing an electrodynamic balance. (NH4)2SO4 particles with glutaric acid coating (49 wt % glutaric acid) had different hygroscopicity and morphology in the two cycles. Once the particles deliquesced, the dissolution of the solid (NH4)2SO4 core and the glutaric acid coating formed mixed (NH4)2SO4-glutaric acid solution droplets, which was confirmed by Raman characterization. Coating studies with either deliquescence or crystallization measurements, or one complete cycle of these two measurements may not fully assess the effects of the organic coatings on aerosol hygroscopicity. We also present an analysis on the kinetic and chemical effects of organic coating on aerosol hygroscopicity. Glutaric acid coating does not impede the evaporation and condensation rates of water molecules compared to the rates of (NH4)2S04 particles in the two cycles. The coating likely affects the hygroscopicity of aerosol particles through dissolution and its chemical interactions with (NH4)2S04.

Adsorption↗

PubMed2001

Enzymatic extractability of soybean meal proteins and carbohydrates: heat and humidity effects.

To study the incomplete enzymatic extractability of proteins and carbohydrates of thermally treated soybean meals, one unheated and three heat-treated soybean meals were produced. To obtain truly enzyme-resistant material, the meals were extracted by a repeated hydrolysis procedure using excessive concentrations of different combinations of commercial protease and carbohydrase preparations. The water extractability of protein from the different meals varied considerably (13-67%). For all soybean meals, enzymatic treatment extracted most of the original protein (89-94%). Carbohydrase preparations did not improve protein extraction. High-humidity heat treatment led to a more effective enzymatic extraction, which seemed to correlate with the extent of protein denaturation. Results with purified proteins indicated that the soybean meal matrix affects the enzymatic extraction of protein from the meals. Interactions between protein and other components (e.g., cellulose) may explain the incomplete enzymatic extractability of protein from the meals.

Carbohydrate Metabolism↗

PubMed2002

Structural changes in apple rings during convection air-drying with controlled temperature and humidity.

The structure of heat pump dried apple slices, developed as a function of air temperature and constant humidity, was studied by measuring porosity and using electron microscopy. The porosity of the apple rings increased linearly when the moisture content decreased during drying and then reached a constant value. In all dried apple slices, a degree of cellular collapse occurred. Case hardening occurred in the surface of the dried tissue when the apple slices were dried at 40-45 and 60-65 degrees C, and in the extreme case (at 60-65 degrees C) cracks were formed on the surface.

Food Preservation↗

PubMed2004

Inverse gas chromatographic method for measurement of interactions between soy protein isolate and selected flavor compounds under controlled relative humidity.

An inverse gas chromatographic (IGC) method was developed to study the binding interactions between selected volatile flavor compounds and soy protein isolate (SPI) under controlled relative humidity (RH). Three volatile probes (hexane, 1-hexanol, and hexanal) at very low levels were used to evaluate and validate system performance. On the basis of the thermodynamic data and the isotherms measured at 0% RH, 1-hexanol and hexanal had higher binding affinities than hexane, which could be attributed to hydrogen-bonding interactions with SPI. At 30% RH, 1-hexanol and hexanal were retained less than at 0% RH, indicating possible competition for binding sites on the SPI surface between water and volatile probe molecules. Results showed that the thermodynamic data determined were comparable to the available literature values. Use of IGC allowed for the rapid and precise generation of sorption isotherms. Repeatability between replicate injections and reproducibility across columns were very good. IGC is a potentially high-throughput method for the sensitive, precise, and accurate measurement of flavor-ingredient interactions in low-moisture food systems.

Adsorption↗

PubMed2000

Protein insolubilization and thiol oxidation in sulfite-treated wheat gluten films during aging at various temperatures and relative humidities.

Gluten films were prepared by casting an acidic and ethanolic solution of gluten previously treated with sodium sulfite. The effects of sulfitolysis on proteins were investigated by SE-HPLC and thiol/disulfide content measurements. During sulfitolysis, insoluble glutenin macropolymer was converted into its constitutive subunits. About 10% of gluten disulfide bonds were cleaved, of which three-fourths originated from interchain disulfide bonds. Oxidation of thiol groups released during sulfitolysis was followed for various temperatures (T) and relative humidities. Oxidation was shown to be a second-order rate process occurring below the glass transition temperature (T(g)) and related to T - T(g). Thiol oxidation ensured the formation of interchain bonds between specific classes of gluten proteins according to an ordered process. Intrachain bonds were also formed and through thiol/disulfide-exchange reactions were finally converted to interchain bonds. Thus, fully oxidized gluten films had more insoluble glutenin macropolymers than native gluten.

Chromatography, High Pressure Liquid↗

PubMed2005

Electrodynamic investigations of conduction processes in humid microcrystalline cellulose tablets.

The conduction mechanism in microcrystalline cellulose (MCC) tablets at varying relative humidity (RH) has been investigated by using the techniques of low frequency dielectric spectroscopy and transient current analysis at room temperature. The dependence on RH on the measured conductivity and charge carrier density indicates that a high-power-law-exponent percolation process of cations being conducted on water molecules occupying available 6-OH units on the cellulose chains is the dominating dc conduction mechanism at RH below 3 wt % of moisture content. The experimentally observed decrease in charge carrier mobility with increasing moisture content shows that protons and H3O+ ions that are being blocked at empty 6-OH sites also contribute to the charge transport process in cellulose at low moisture contents.

Cellulose↗

PubMed2005

Effect of humidity on the supramolecular structure of cotton, studied by quantitative spin probing.

The effect of water content on the physicochemical properties of the amorphous regions in cotton were investigated by measuring the electron paramagnetic resonance (EPR) of TEMPOL nitroxide radicals, deposited in cotton at different loadings, as a function of the relative humidity (RH) and temperature. Three different components contribute differently to the experimental EPR spectra, corresponding to (a) mobile radicals absorbed in the bulk amorphous region, (b) slow moving radicals adsorbed on the crystallite surfaces in cotton, and (c) aggregated radicals. These components were analyzed by means of computer-aided simulations of the line shapes and simplified line width methods. Polarity and mobility parameters were extracted from the analysis of the spectra. For all loadings and temperatures, the polarity suddenly dropped when the water content fell below approximately 3 wt %, i.e., when water was removed from the bulk amorphous regions. At the lowest loading (2 x 10(-5) mol kg(-1)), the spectra were independent of the RH, and only mobile radicals were observed. At intermediate loading (10(-4)-10(-3) mol kg(-1)) both mobile (fast) and adsorbed (slow) moving radicals were present, the fraction of which depended on the RH. The mobility of the adsorbed and mobile radical signals was smaller at higher loadings, indicating microdomains of different character. The temperature dependence of the rotational correlation times provided the activation energies, which were much lower than in liquids. An equilibrium exists between the mobile and the adsorbed radicals. The temperature dependence of the equilibrium constant, K, gave the enthalpy and the entropy of the adsorption process. At low RH, the enthalpy and the entropy values indicated a simple adsorption process. At 10(-3) mol kg(-1), the values were independent of the RH, but at low loadings the values increased with the increase in the RH, which suggested a displacement of adsorbed water by the radicals at high water content. At loadings above 10(-3) mol kg(-1), signals from radicals strongly interacting via spin exchange were observed, which are assigned to aggregated radicals; simulation of the spectra gave an activation energy of 13 kJ mol(-1) for the spin exchange process. These effects are rationalized on the basis of microdomains of different character within cotton, reflecting the variation in pore sizes (0.5-8 nm) and the relaxation behavior of the cellulose chains.

Cotton Fiber↗

PubMed2006

Porous structures of polymer films prepared by spin coating with mixed solvents under humid condition.

We investigate the effects of interfacial energy between water and solvent as well as polymer concentration on the formation of porous structures of polymer films prepared by spin coating of cellulose acetate butyrate (CAB) in mixed solvent of tetrahydrofuran (THF) and chloroform under humid condition. The interfacial energy between water and the solvent was gradually changed by the addition of chloroform to the solvent. At a high polymer concentration (0.15 g/cm3 in THF), porous structures were limited only at the top surfaces of CAB films, regardless of interfacial energies, due to the high viscosity of the solution. At a medium concentration (approximately 0.08 g/cm3 in THF), CAB film had relatively uniform pores at the top surface and very small pores inside the film because of the mixing of the water droplets with THF solution. When chloroform was added to THF, pores at the inner CAB film had a comparable size with those at the top surface because of the reduced degree of the mixing between the water droplets and the mixed solvent. A further decrease in polymer concentration (0.05 g/cm3 in THF) caused the final films to have a two-layer porous structure, and the size of pores at each layer was almost the same.

Cellulose↗

PubMed1998

Studies on the influence of temperature, relative humidity and microenvironment on the natural fermentation of African oil bean seeds to 'Ugba'.

Studies on the enhancement of the traditional production of 'Ugba' (a protein-rich fermented food) from African oil bean seeds were undertaken by fermenting the bean seeds at different temperatures, relative humidities (RH) and microenvironments. Fermentation was monitored by pH, texture, amino-nitrogen content and the viable cell count of the substrate. The 40 degrees C, 98% RH or the 130 microm high density polyethylene (HDPE) treatment increased the fermentation microflora from ca. 10(6) CFU/g to ca. 10(8) CFU/g with high initial changes in pH (5.8-ca. 7.9) and texture (2.0 kg/cm2 to between 1.4 kg/cm2 and 0.9 kg/cm2) in 24 hours. Products with amino-nitrogen contents of between 12.00 mg N/100 g dry matter and 14.00 mg N/100 g dry matter were obtained in 3 days. The cell count of the 30 degrees C, 80% RH or 70 microm treatment increased from 10(6) CFU/g to ca. 10(7) CFU/g and the pH increased from 5.8 to about 6.7 with a coincident decrease in the texture value from 2.0 kg/cm2 to about 1.7 kg/cm2 in 24 hours. Products with amino-nitrogen contents between 15.00 mg N/100 g dry matter and 19.2 mg N/100 g dry matter were obtained after 3 days. Changes in the fermentation indicators were not significant at p < or = 0.05 (pH and texture) and at p < or = 0.01 (amino-nitrogen) after 3 days for the 25 degrees C, 59.9% RH or 50 microm low density polyethylene (LDPE) treatment. Products of fermentation at the combined optimal conditions (80% RH, 35 degrees C, and 70 microm HDPE) compared very well with the traditionally fermented products in terms of pH, texture and amino-nitrogen content.

Environment↗

PubMed1995

Effect of humidity-dependent changes in crystal structure on the solid-state fluorescence properties of a new HMG-CoA reductase inhibitor.

It has been shown previously that the disodium salt of a new HMG-CoA reductase inhibitor (SQ-33600) is capable of existing as a number of hydrate species [1]. Three crystalline solid hydrates and one liquid crystalline phase have been identified, each having a definite stability over a defined range of humidity. These forms have been found to exhibit varying fluorescence properties in their respective solid states, with differences in bandshapes and intensities being noted for each. These spectral variations have been correlated with the known pseudopolymorphism of the compound.

Anticholesteremic Agents↗

PubMed1993

The dissolution and bioavailability of etodolac from capsules exposed to conditions of high relative humidity and temperatures.

The dissolution and bioavailability of etodolac from capsules exposed to high relative humidity and temperature were compared to those from capsules stored at room temperature (RT). Dissolution of stressed and control capsules was evaluated using a USP basket apparatus at 100 rpm with 900 mL pH 7.5 phosphate buffer (0.05 M) at 37 degrees C. The dissolution of etodolac from capsules exposed to stressed conditions was also evaluated with enzymes (pancreatin, 1%, w/v) added to the dissolution medium. The bioavailability of etodolac from capsules exposed to stressed conditions was compared in both dogs and humans to capsules stored at RT conditions. Capsules, 200 and 300 mg, exposed to stressed conditions failed the dissolution (without enzymes) specification [not less than 85% released (80% Q) in 30 min]. However, upon enzyme addition, all capsules met the specification. The rate and extent of absorption from these 200 and 300 mg etodolac capsules in dogs were equivalent to those from capsules stored at RT conditions that passed the dissolution specification. Similarly, the bioavailability of etodolac from 300 mg capsules that failed the dissolution specification upon exposure to stressed conditions was equivalent to that of control capsules in 24 adult male volunteers. Thus, an in vitro dissolution test with enzymes provides a better indication of stressed capsule performance in vivo.

Animals↗

PubMed2002

Volatile metabolites from microorganisms grown on humid building materials and synthetic media.

Growth of different microorganisms is often related to dampness in buildings. Both fungi and bacteria produce complicated mixtures of volatile organic compounds that include hydrocarbons, alcohols, ketones, sulfur- and nitrogen-containing compounds etc. Microbially produced substances are one possible explanation of odour problems and negative health effects in buildings affected by microbial growth. A mixture of five fungi, Aspergillus versicolor, Fusarium culmorum, Penicillium chrysogenum, Ulocladium botrytis and Wallemia sebi were grown on three different humid building materials (pinewood, particle board and gypsum board) and on one synthetic medium. Six different sampling methods were used, to be able to collect both non-reactive volatile organic compounds and reactive compounds such as volatile amines, aldehydes and carboxylic acids. Analysis was performed using gas chromatography, high-performance liquid chromatography and ion chromatography, mass spectrometry was used for identification of compounds. The main microbially produced metabolites found on pinewood were ketones (e.g. 2-heptanone) and alcohols (e.g. 2-methyl-1-propanol). Some of these compounds were also found on particle board, gypsum board and the synthetic medium, but there were more differences than similarities between the materials. For example, dimethoxymethane and 1,3,5-trioxepane and some nitrogen containing compounds were found only on particle board. The metabolite production on gypsum board was very low, although some terpenes (e.g. 3-carene) could be identified as fungal metabolites. On all materials, except gypsum board, the emission of aldehydes decreased during microbial growth. No low molecular weight carboxylic acids were identified.

Air Pollution, Indoor↗

PubMed2000

Influence of relative humidity on particle size and UV sensitivity of Serratia marcescens and Mycobacterium bovis BCG aerosols.

SETTING: A study of Serratia marcescens and BCG aerosols. OBJECTIVE: To evaluate the effect of relative humidity (RH) on (1) the particle size and (2) sensitivity of 254nm germicidal ultraviolet (UV) irradiation. METHODS: We built a RH controlled experimental chamber into which bacteria were aerosolized, exposed to varying amounts of UV irradiance over measured time periods, and quantitatively evaluated for viability. Aerosolized Serratia marcescens and bacille Calmette-Guérin (BCG) were subject to UV doses ranging from 57-829 microW. sec/cm(2), and sampled with a six-stage Andersen culture plate impactor at RHs ranging from 25-95%. RESULTS: Percent survival for both organisms was inversely related to UV dose. Serratia marcescens was more susceptible to UV than BCG under all conditions. More than 95% of the bacterial aerosol particles were 1.1-4.7 microm in aerodynamic diameter, and particles sizes increased from low (25-36%) to high (85-95%) RH. The count median diameter ranged from 1.9-2.6 microm for Serratia marcescens and from 2.2-2.7 microm for BCG as RH increased. For both Serratia marcescens and BCG, resistance to UV increased as RH increased. The UV resistance of both Serratia marcescens and BCG aerosols dramatically increased at RH higher than 85%. CONCLUSIONS: Our results indicate that differences in UV dose, kinds of microorganisms, airborne particle size and RH affect UV susceptibility.

Aerosols↗

PubMed2002

A comparison of the lactate Pro, Accusport, Analox GM7 and Kodak Ektachem lactate analysers in normal, hot and humid conditions.

This study aimed to compare the performance of a new portable lactate analyser against other standard laboratory methods in three conditions, normal (20 +/- 1.3 degrees C; 40 +/- 5 % RH), hot (40 +/- 2.5 degrees C; 40 +/- 5 % RH), and humid (20 +/- 1.1 degrees C; 82 +/- 6 % RH) conditions. Seven healthy males, ([Mean +/- SE]: age, 26.3 +/- 1.3 yr; height, 177.7 +/- 1.6 cm; weight, 77.4 +/- 0.9 kg, .VO(2)max, 56.1 +/- 1.9 ml x kg x min(-1)) undertook a maximal cycle ergometry test to exhaustion in the three conditions. Blood was taken every 3 min at the end of each stage and was analysed using the Lactate Pro LT-1710, the Accusport, the Analox GM7 and the Kodak Ektachem systems. The MANOVA (Analyser Type x Condition x Workload) indicated no interaction effect (F(42,660), = 0.45, p > 0.99, Power = 0.53). The data across all workloads indicated that the machines measured significantly differently to each other (F(4,743) = 14.652, p < 0.0001, Power = 1.00). The data were moderately to highly correlated. We conclude that the Lactate Pro is a simple and effective measurement device for taking blood lactate in a field or laboratory setting. However, we would caution against using this machine to compare data from other machines.

Adult↗

PubMed2006

Heart rate, thermoregulatory and humoral responses during a 9-day cycle race in a hot and humid climate.

Seven acclimated elite road cyclists were recruited from among the participants in the Tour de Guadeloupe, a 9-day cycle race (D1-D9) held in hot/humid climate (approximately 31 degrees C dry temperature and 76 % relative humidity). Each day of the competition, heart rate (HR) was recorded every 15 s, tympanic temperature (Ttym) was recorded before exercise and immediately at the end of each stage, and body mass loss (BML) was measured by changes in nude body mass at rest and after each stage. Blood lactate concentration [La] was measured at rest and 5 min after each stage. Venous blood samples were collected before the competition and on the 4 th and 8 th days (D4, D8) for hematological and serum determinations and biochemical analyses. No significant differences were found in cardiac, thermoregulatory, or [La] parameters at rest over the 9 days. The subjects spent 31 +/- 6 % of their time below the lactate threshold (LT), 52 +/- 8 % between LT and the onset of blood lactate accumulation (OBLA), and 18 +/- 6 % above OBLA. The increase in Ttym at D3 (0.48 +/- 0.3 degrees C) was significantly lower (p < 0.05) than at D1, D4, D5, and D6. No difference was found for BML between the different stages. Significant increases (p < 0.05) were observed in monocytes at D8 vs. D4 and pre-race values (D0) and in serum Cl-concentration at D4 vs. D0 and D8 (p < 0.05). A significant reduction was observed in mean corpuscular hemoglobin concentration (MCHC) at D8 and D4 vs. D0 (p < 0.01). No difference was found in other blood parameters at D0, D4, or D8. Taken together, these results suggest that a consecutive 9-day cycle competition in hot/humid climate did not alter homeostasis at rest in acclimated well-trained cyclists. No major effect of repeated cycling stages on thermoregulatory and blood parameters was observed during the Tour de Guadeloupe. Further research is needed to compare the cardiac adaptations of natives to tropical climate and un-acclimated subjects during long-duration exercise.

Adult↗

PubMed1988

Temperature and humidity of expired air of sheep.

The temperature and humidity of expired air from three adult Merino sheep were measured at air temperatures of 20, 30 and 40 degrees C before and after the animals were shorn. Expired air was apparently always saturated with water vapour. At the higher air temperatures the temperature of expired air was close to deep body temperature; at lower air temperatures, expired air had been significantly cooled, e.g. to 32.3 degrees C in shorn sheep at 20 degrees C air temperature. Expired air was cooler from shorn than from unshorn animals at 20 and 30 degrees C air temperature, possibly due to thermally induced vasomotor changes in the upper respiratory tract. Cooling of expired air would be expected to lead to recovery of some of the water evaporated during inspiration; at 20 degrees C air temperature, this fraction was estimated to be 25% in unshorn sheep and 36% in shorn sheep.

Animals↗

PubMed2005

Relationships of intercropped maize, stem borer damage to maize yield and land-use efficiency in the humid forest of Cameroon.

Stem borers are the most important maize pests in the humid forest zone of Cameroon. Field trials were conducted in the long and short rainy seasons of 2002 and 2003 to assess the level of damage and yield reductions caused by stem borers in monocropped maize and in maize intercropped with non-host plants such as cassava, cowpea and soybean. The intercrops were planted in two spatial arrangements, i.e. alternating hills or alternating rows. All intercrops and the maize monocrop were grown with and without insecticide treatment for assessment of maize yield loss due to borer attacks. The land-use efficiency of each mixed cropping system was evaluated by comparing it with the monocrop. The temporal fluctuation of larval infestations followed the same pattern in all cropping systems, but at the early stage of plant growth, larval densities were 21.3-48.1% higher in the monocrops than in intercrops, and they tended to be higher in alternating rows than alternating hills arrangements. At harvest, however, pest densities did not significantly vary between treatments. Maize monocrops had 3.0-8.8 times more stems tunnelled and 1.3-3.1 times more cob damage than intercrops. Each percentage increase in stem tunnelling lowered maize grain yield by 1.10 and 1.84 g per plant, respectively, during the long and short rainy season in 2002, and by 5.39 and 1.41 g per plant, respectively, in 2003. Maize yield losses due to stem borer were 1.8-3.0 times higher in monocrops than in intercrops. Intercrops had generally a higher land-use efficiency than monocrops, as indicated by land-equivalent-ratios and area-time-equivalent-ratios of >1.0. Land-use efficiency was similar in both spatial arrangements. At current price levels, the net production of mixed cropping systems was economically superior to controlling stem borers with insecticide in monocropped maize. The maize-cassava intercrop yielded the highest land equivalent ratios and the highest replacement value of the intercrop. At medium intensity cropping this system is thus recommended for land-constrained poor farmers who do not use external inputs such as fertilizer and insecticides.

Agriculture↗