SEARCH · PubMed Health

Results for “Polyurethanes”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

PubMed2003

Platelet adhesive resistance of segmented polyurethane film surface-grafted with vinyl benzyl sulfo monomer of ammonium zwitterions.

Platelet from human plasma adhered on the segmented poly(ether urethane) (SPEU) film grafted with N,N-dimethyl-N-(p-vinylbenyl)-N-(3-sulfopropyl) ammonium (DMVSA) was studied. SPEU films were hydroxylated by potassium peroxosulfate (KPS) and then grafted with DMVSA using ceric ammonium nitrate (CAN) as initiator. The mixing time of hydroxylated SPEU/CAN and the monomer concentration effect on graft polymerization yield were determined by ATR-FTIR. Surface analysis of the grafted films by ATR-FTIR and ESCA confirmed that DMVSA was successfully grafted onto the SPEU film surface. The grafted film possessed a relatively hydrophilic surface, as revealed by water contact angle measurement. The improved blood compatibility of the grafted films was preliminarily evaluated by a platelet-rich plasma adhesion study and scanning electron microscopy, using original SPEU and hydroxylated SPEU films as the controls. The results showed that platelet attachment was decreased greatly on the segmented polyurethane films grafted with DMVSA. This kind of new biomaterials grafted with sulfo ammonium zwitterionic monomers might have potential for biomedical applications.

Blood Platelets↗

PubMed2004

Pore size, tissue ingrowth, and endothelialization of small-diameter microporous polyurethane vascular prostheses.

Small-diameter microporous polyurethane vascular prostheses with an average pore size of between 5 and 30mum at the outer surfaces and 30mum at the luminal surface were prepared. Thirty-two PU and 8 expanded polytetrafluoroethylene (ePTFE) prostheses were implanted into the abdominal aorta of rats for periods ranging from 1 to 8 weeks. Harvested prostheses were analysed histologically and morphologically. The progress of endothelial-like cells and the extent of infiltration of perigraft tissues were quantified. All of the prostheses showed fast growth of endothelial-like cells in the second week, with the PU prostheses having an external pore size of 30mum producing the highest rate. It was also during the second week that perigraft tissue grew most significantly into the prosthetic structure. This coincident may suggest the importance of rapid tissue regeneration for the early endothelial healing. The role of the ingrowth perigraft tissues is likely to support and stabilize the neointima. The thickening of neointima was mainly located at the vicinity of the proximal anastomoses of some of the PU prostheses and was unrelated with the extent of perigraft tissue infiltration. In the PU prostheses, a complete lining of endothelial-like cells was achieved by the end of 4 weeks. Expanded PTFE prostheses displayed smooth, thin intima, very limited tissue ingrowth, and incomplete coverage of endothelial-like cells.

Animals↗

PubMed2004

Endothelium regeneration on luminal surface of polyurethane vascular scaffold modified with diamine and covalently grafted with gelatin.

Using the recently developed surface modification technique, free amino groups have been introduced onto polyester-type polyurethane (PU) scaffolds. The introduction of these free amino groups increases the surface energy and provides a convenient way to further immobilize bioactive species such as gelatin, collagen or chitosan, etc. on the scaffold surface by employing glutaraldehyde as a coupling agent. These modifications are advantageous to enhance cell-material interaction. The culture of human umbilical vein endothelial cells (HUVECs) in vitro proved that the cell proliferation ratio of both the aminolyzed and the biomacromolecules-immobilized PU membranes was improved greatly comparing with the control PU. Scanning electron microscopy and confocal laser scanning microscopy observations displayed that the gelatin-immobilized PU vascular scaffold had formed a monolayer of endothelial intima on its luminal surface after HUVECs were cultured for 6 d. Therefore, the aminolysis and the following biomacromolecule immobilization is a promising way to enhance the cell-PU interaction that can accelerate the endothelium regeneration, which is crucial for blood vessel tissue engineering.

Biocompatible Materials↗

PubMed1997

Photochemical grafting of alpha-propylsulphate-poly(ethylene oxide) on polyurethane surfaces and enhanced antithrombogenic potential.

The aim of this study is the grafting of photoreactive alpha-propylsulphate-poly(ethylene oxide) (PEO-SO3), one end of which is capped with an azidophenyl group, on polyurethane (PU) surfaces via a photochemical technique. The anti-Factor Xa activity and the platelet adhesion characteristics of the modified PU surface were evaluated by a chromogenic assay method and by a flow-controlled chamber method, respectively. X-ray photoelectron spectroscopy analysis showed that PEO-SO3 was covalently grafted on the PU surface. The grafted surface showed anti-Factor Xa activity in the presence of antithrombin III, and significantly reduced platelet adhesion characteristics as compared with those of the unmodified PU surface. These results suggest that the grafting of PEO-SO3 improves the antithrombogenicity of PU surfaces.

Antithrombin III↗

PubMedDate not supplied

Bacterial adhesion on PEG modified polyurethane surfaces.

Polyurethane surface was modified with poly(ethylene glycol) (mol. wt. 1000, PEG1k) carrying terminal hydroxyl, amino and sulfonate groups, poly(ethylene glucol) (mol. wt. 3350, PEG3.4k) and PEG3.4k-Heparin, respectively. These surfaces were investigated for bacterial adhesion using S. epidermidis and E. coli in tryptic soya broth (TSB), brain heart infusion (BHI), and human plasma. All PEG modified surfaces reduced bacterial adhesion significantly and the adhesion level differs depending on surfaces as well as media. In the case of PEG1k surfaces, no reduction of S. epidermidis adhesion was demonstrated in TSB media, regardless of terminal functional groups of PEG1k. However, adhesion in plasma was reduced to the different degree, depending on terminal groups of PEG1k (least adhesion on sulfonated PEG surface). Relatively longer PEG surface (PEG3.4k) and PEG3.4k-heparin surface minimized bacterial adhesion in both media. In the case of E. coli adhesion, significant reduction in adherent bacteria was observed on all PEG1k, PEG3.4k, and PEG-heparin surfaces in both media compared to controls. In contrast, no reduction in bacterial adhesion was demonstrated on poly(propylene glycol) (PPG1k) grafted PU surface as compared to control PU. These results suggest that surface modification with PEG1k-SO3, PEG3.4k and PEG3.4k-heparin seems to be effective for prevention of bacterial adhesion and subsequent infection.

Animals↗

PubMedDate not supplied

Preparation of insulin-immobilized polyurethanes and their interaction with human fibroblasts.

Insulin-immobilized polyurethanes (PU) were prepared by the graft polymerization of acrylic acid on oxygen plasma-treated PU, followed by a coupling reaction with polyethylene oxide (PEO) and subsequently with insulin. Modified PUs were characterized by measuring the water contact angle, the electron spectroscopy for chemical analysis and the attenuated total reflection Fourier-transform infrared spectroscopy. The wettabilities of the PU surfaces were increased by the introduction of acrylic acid, PEO and insulin. The amount of insulin immobilized was controlled by changing the concentrations of grafted acrylic acid and PEO. The interactions of human fibroblasts with surface-modified PUs were investigated using [3H]-thymidine incorporation and optical microscopy. Compared to the PU control, the proliferation of cells on the insulin-immobilized PUs was accelerated irrespective of the presence of serum while it was not influenced by PEO grafting. It seemed to be certain, from the experiments with high performance liquid chromatography, that A chain of insulin mainly reacted with the amine-end group of PEO grafted during the immobilization reaction.

Acrylates↗

PubMed1999

Synthesis and characterization of heparinized polyurethanes using plasma glow discharge.

Polyurethanes (PU) were synthesized from 4,4'-diphenylmethane diisocyanate and polytetramethylene glycol, and subsequently with ethylene diamine as a chain extender. The PU film was exposed to oxygen plasma glow discharge to produce peroxides on the surfaces. These peroxides were then used as catalysts for the copolymerization of acrylic acid (AA) and methyl acrylate (MA) in order to prepare carboxyl group-introduced PU (PU-C). Heparin-immobilized PU was prepared using the coupling reaction of PU-C with polyethylene oxide (PEO) followed by the reaction of grafted PEO with heparin. The surface-modified PUs were then characterized by attenuated total reflection Fourier transform infrared spectroscopy, electron spectroscopy for chemical analysis (ESCA), and a contact angle goniometer. The concentration of carboxylic acid groups on the PU surfaces could be controlled within the range of 0.47-1.68 micromol cm(-2) by the copolymerization of AA and MA. The amounts of heparin coupled to terminus amino groups on PU-6 and PU-33 were 1.30 and 1.16 microg cm(-2), respectively. The water contact angle of the PU was decreased by AA grafting, and further decreased by PEO grafting and heparin immobilization, showing an increased hydrophilicity of the modified PUs. A 3% loss from the originally bound heparin appeared within several hours and thereafter almost no heparin was released when heparin-immobilized PUs were immersed in a physiological solution for 100 h, indicating the covalent immobilization of heparin on the surfaces.

Biocompatible Materials↗

PubMed1999

PDMS-based polyurethanes with MPEG grafts: synthesis, characterization and platelet adhesion study.

Polyurethane (PU), based on poly(dimethyl siloxane) (PDMS) as a soft segment, with monomethoxy poly(ethylene glycol) (MPEG) grafted onto it, was synthesized as a new polymeric biomaterial for coating PDMS-based biomedical devices. Two different chain extenders, ethylene glycol (EG) and diethyl bis(hydroxymethyl) malonate (DBM), were used for the synthesis of PDMS-based PUs and then MPEG was grafted onto them by allophanate and esterification reactions, respectively. Their molecular structures were confirmed qualitatively and quantitatively using FT-IR and 1H-NMR measurements. PDMS-based PU was more hydrophobic than Pellethane, which is a commercial biomedical-grade poly(ether urethane), due to the PDMS-rich phase at the polymeric surface. However, the incorporation of MPEG in PDMS-based PU induced an increase in hydrophilicity. Analyses of their morphology using dynamic mechanical analysis and differential scanning calorimetry showed that the degree of phase separation increased with the content of hard segments. It also showed that MPEG is compatible with a hard segment consisting of 4,4'-diphenylmethane diisocyanate (MDI) and DBM, while being incompatible with one consisting of MDI and EG. Platelet adhesions with PDMS-based PUs were significantly reduced when compared with Pellethane. It was also observed from a platelet adhesion experiment that the incorportion of MPEG further reduced platelet adhesion. PDMS-based PUs with MPEG grafts, which have few hard segments and a distinct PEG phase, exhibited the least platelet adhesion among the polymer samples tested.

Biocompatible Materials↗

PubMed2000

Polyurethane surfaces modified by amphiphilic polymers: effects on protein adsorption.

Surface modification of polyurethane (PUR) surfaces was carried out by using three different amphiphilic polymers. Two of the polymers were graft copolymers, having backbones consisting of poly(methyl methacrylate-co-ethylhexyl acrylate) and poly(styrene-co-acrylamide), respectively, and poly(ethylene oxide) PEO 2000 grafts. The third polymer was a commercially available poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) block copolymer, Pluronic 9400. The polymers were designated ACRY, STY2, and PE94, respectively. Surface modification was achieved by adsorption of the amphiphilic polymers at PUR surfaces from an aqueous solution, or by blending the amphiphiles into a PUR solution, followed by solution casting of films. The accumulation of the amphiphilic polymers at the PUR surfaces was observed by XPS and contact angle measurements. The ACRY and PE94 polymers were shown to adsorb poorly at the PUR surface, but gave strong surface effects when present in the PUR matrix. Protein adsorption was measured under static as well as under flow conditions. The modified surfaces had generally lower adsorption of blood proteins (HSA, Fg and IgG) than the unmodified PUR surfaces. ACRY blend modified surfaces had the lowest adsorption.

Adsorption↗

PubMed2000

Platelet adhesion onto segmented polyurethane film surfaces modified by addition and crosslinking of PEO-containing block copolymers.

Polyethylene oxide (PEO) surfaces were prepared by the addition of PEO-containing amphiphilic block copolymers as surface modifying additives and of dicumyl peroxide (DCP) as a crosslinking agent in segmented polyurethane (PU). PEO-polypropylene oxide-PEO triblock copolymers (Pluronics) with different PEO chain length (from 0 to 98) were used as the surface modifying additives. The PEO additives in the PU film were then crosslinked to be stably entrapped in the PU matrix. The crosslinking was done by free radicals produced from the decomposition of DCP in the film through heating (120 degrees C) or ultraviolet irradiation (254 nm). The surface properties of the PEO additive-entrapped PU films were investigated by the measurement of water contact angles and electron spectroscopy for chemical analysis. The bulk properties such as water absorption, long-term film stability, and tensile strength and elongation at break, were also investigated. It was observed that addition of a small amount (5 wt% based on PU) of the PEO additives resulted in a considerable change of surface characteristics. The PEO additives were stably entrapped in the PU films by crosslinking of them, without significant changes of bulk properties of the films. From the platelet adhesion test on the prepared PEO additive-containing film surfaces, it was observed that the platelet adhesion on the surfaces decreases with increase in PEO chain length of PEO additives. The film surface containing additive with long PEO chains (chain length of 98) was particularly effective in preventing platelet adhesion. The crosslinking of the PEO additives in PU films did not affect the behavior of platelet adhesion on the surfaces; the films with crosslinked PEO additives showed similar platelet adhesion on the surfaces to the films with uncrosslinked ones.

Biocompatible Materials↗

PubMed1996

Bacterial recolonization of the skin under a polyurethane drape in hip surgery.

This study investigated the proliferation of skin flora under polyurethane (PU) wound dressings following surgical interventions. In vitro the film proved to be impermeable to staphylococci. However, bacteria migrated under the film, showing a preference for the adhesive rather than the adhesive-free areas. The skin of 43 patients with incisions of the proximal thigh was covered postoperatively with a transparent PU-dressing. This was examined bacteriologically preoperatively and at the third and seventh postoperative days. The use of an antiseptic (povidone iodine) reduced the number of colony forming units in the postoperative skin but at the same time there was a significant reduction of bacteria under the film in comparison with the uncovered skin. The numbers and species of bacteria in different areas under the film did not suggest a spread of organisms from the uncovered skin to the skin under the film, but rather that there was a multifocal microbial regeneration.

Adult↗

PubMed2000

Toxic byproducts from the combustion of varnish wastes based on polyurethane in a laboratory furnace.

Varnish wastes based on polyurethane were burnt in a laboratory scale furnace at different residence time of gases and temperatures and with a fuel-rich atmosphere and with an excess of oxygen. The yields of CO, CO(2), six light hydrocarbons (methane, ethylene, etc. ) and 31 semivolatile+volatile compounds (benzene, toluene, naphthalene, dibezofuran, etc.) were determined with stoichiometric factors of the oxygen between 0.6 and 0.9, nominal temperatures of the reactor between 750-1050 degrees C and residence times of the volatiles evolved and formed between 2 and 6 s. The collection of the volatiles evolved was carried out with a Tedlar bag and by XAD-4 resin, comparing the data obtained in both cases. The maximum emission factors or yields of volatiles+semivolatiles were obtained at 850-950 degrees C, with values above 0.5% for benzene, naphthalene, acenaphthylene, phenantrene and fluoranthene. The thermal behaviour of different compounds was analysed. Naphthalene, benzene and toluene were also detected in the excess oxygen runs.

Hydrocarbons↗

PubMed2003

Sorption and diffusion of chlorinated aliphatic hydrocarbon penetrants into diol chain extended polyurethane membranes.

Sorption and diffusion of a number of chlorinated alkanes through a diol chain extended polyurethane (PU) membranes have been investigated at 25, 40 and 60 degrees C, based on an immersion weight gain method. From the sorption result, the diffusion (D) and permeation (P) coefficients of halogenated hydrocarbon penetrants have been calculated. Molecular transport data depends on membrane-solvent interactions, size of the penetrants, temperature and also morphology of the chain extended PUs. The temperature dependence of the transport coefficient has been used to estimate the activation parameters for the process of diffusion (E(D)) and permeation (E(P)) from the Arrhenius plots. Furthermore, the sorption results have been interpreted interms of the thermodynamic parameters such as enthalpy and entropy.

Adsorption↗

PubMed2001

Optimization of scanning transmission X-ray microscopy for the identification and quantitation of reinforcing particles in polyurethanes.

The morphology, size distributions, spatial distributions, and quantitative chemical compositions of co-polymer polyol-reinforcing particles in a polyurethane have been investigated with scanning transmission X-ray microscopy (STXM). A detailed discussion of microscope operating procedures is presented and ways to avoid potential artifacts are discussed. Images at selected photon energies in the C 1s, N 1s and O 1s regions allow unambiguous identification of styrene-acrylonitrile-based (SAN) copolymer and polyisocyanate polyaddition product-based (PIPA) reinforcing particles down to particle sizes at the limit of the spatial resolution (50 nm). Quantitative analysis of the chemical composition of individual reinforcing particles is achieved by fitting C 1s spectra to linear combinations of reference spectra. Regression analyses of sequences of images recorded through the chemically sensitive ranges of the C 1s, N 1s and O 1s spectra are used to generate quantitative compositional maps, which provide a fast and effective means of investigating compositional distributions over a large number of reinforcing particles. The size distribution of all particles determined by STXM is shown to be similar to that determined by TEM. The size distributions of each type of reinforcing particle, which differ considerably, were obtained by analysis of STXM images at chemically selective energies.

Microscopy, Electron, Scanning↗

PubMed1998

Alternative delivery of keratinocytes using a polyurethane membrane and the implications for its use in the treatment of full-thickness burn injury.

The Epicel ASAProgram service generates autologous keratinocyte grafts used for the closure of full-thickness wounds in moderately and severely burned patients. The manufacturing process used to generate Epicel service autografts (ESA) is based upon the keratinocyte co-culture technique described by Rheinwald and Green which employs murine Swiss 3T3/J2 fibroblasts as feeder cells. Recently, a technique has been described that employs a polyurethane wound dressing, HydroDerm (HD, Innovative Technologies, Ltd), as a delivery vehicle for cultured keratinocytes intended for autologous grafting. We have examined the practical feasibility of this technique and report on testing the ability of HD to support keratinocyte growth and epithelium formation in vitro, at the air-liquid interface (ALI), and in vivo, after grafting to full-thickness wounds created on the backs of athymic (Swiss Nu/Nu) mice. The results demonstrate that keratinocytes grow on the HD dressing in Gibco SFM at a rate that is approximately 15 per cent of that observed when cells are cultivated on tissue culture (TC) plastic using standard techniques, yet the cells retain their proliferative capacity and form an epithelium in vitro when cultivated at the ALI on a dermal substrate. Keratinocyte-seeded HD membranes were also transferred to full-thickness wounds in athymic mice. Animals grafted with cells seeded to HD developed human epithelium, as revealed by species-specific detection of involucrin and evolved a normal attachment to the wound substratum, as demonstrated through the expression of dermally opposed laminin and alpha 6 beta 4 integrin. The ability of keratinocytes to maintain proliferative potential after seeding onto HD and their ability to form a properly oriented epithelium in vitro and in vivo suggests that this wound dressing may be useful as a vehicle for autologous keratinocyte grafting and help to provide earlier epithelial coverage to the burned patient. However, because of the slow proliferation rate of keratinocytes on HydroDerm, timely graft delivery would be best achieved by combining cell expansion via the Rheinwald and Green culture system, followed by the seeding of cells onto HydroDerm in a reduced calcium medium for subsequent autologous grafting.

3T3 Cells↗

PubMed2000

Octylcyanoacrylate versus polyurethane for treatment of burns in swine: a randomized trial.

In order to determine whether the enhanced reepithelialization of second-degree burns treated with octylcyanoacrylate (OCA) was due to its occlusive nature we compared reepithelialization (REP) and infection rates of second degree burns treated with OCA and polyurethane film (Tegaderm) in swine. Forty-four standardized partial thickness burns were created by applying an aluminum bar preheated to 80 degrees C to the backs of pigs for 20 s and randomly treated with OCA or Tegaderm. Full thickness biopsies were taken at 7, 10 and 14 days for blinded histopathological evaluation of rates of infection and reepithelialization. T-tests and chi(2) tests were used for group comparisons. There were no between group difference in the rates of reepithelialization and infection. All wounds were reepithelialized by day 14 and there were no infections in either group. We conclude that treatment of partial thickness burns with OCA spray or Tegaderm results in similar rates of reepithelialization and infection, suggesting that the beneficial effects of OCA on reepithelialization are due to its occlusive nature.

Animals↗

PubMed1975

[Blood microfiltration. Scanning electron microscopic study of the aggregates retained by a transfusion filter made of polyurethane foam].

Preliminary studies of the transfusion filter Bentley PF 127, a polyfilter type with a graded serie of diameters of microfenestration are reported. Dog blood has been used in all instances of the trial phase. Variations of the hematological factors as well as biochemical disparities have been examined and all deposits were assessed by means of scanning electron microscope. Amounts of deposits increased with the blood age. As far as banked dog blood develops less microaggregates during storage than human blood, the SEM pictures reported are a plea for banked blood microfiltration in any transfusion to human beings. The deposits which were trapped in the polyurethane foam, had previously passed through a screen filter with pore size slightly wider than the standard one (250 microns instead of 170 microns). Unfortunately the possibility of thrombus formation is serious as far as banked blood is rather fragile, and due to a slow flow rate, the time of blood contact with the filter is enough to allow thrombus development. However, the amounts of clots greatly increased with the age of the blood. The importance of filtration by adsorption was not very visible. The future of such a depth filter is questionable: should we prefer a transfusion screen filter with small pore size, the efficiently of which is determined by its pore size, and which traps the microaggregates by mechanical retention, or a depth filter which is supposed to retain the microaggregates regard less of the size but which could be very easily thrombus invaded and does not allow a suffisant blood flow rate for patients needing large amounts of blood in period of initial resuscitation? The debate is open but we should recognize that a screen filter with small pore size is widely used in the hospitals.

Animals↗

PubMed2000

The effect of pore formers on the controlled release of cefadroxil from a polyurethane matrix.

The effect of various pore formers on the controlled release of an antibacterial agent from a polymeric device was examined in order to develop a novel biomaterial that prevents bacterial adhesion and growth on its surface. Cefadroxil was chosen as the model antibiotic and was incorporated into a polyurethane matrix by the solvent-casting method. Polyethylene glycol (PEG) 1450, D-mannitol, or bovine serum albumin (BSA) was used as a pore former. The amount of cefadroxil released from various formulations at 37 degrees C was measured by HPLC. The morphological change of matrices before and after release studies was investigated by scanning electron microscopy (SEM). The duration of antimicrobial activities of matrices against Escherichia coli and Bacillus subtilis was evaluated by measuring the diameters of the inhibition zone. Changing the weight fraction and particle size of the pore formers/drug mixtures could control the release of cefadroxil from the matrix. The release rate of cefadroxil increased as the loading dose of the pore former increased (15<20<25%). Cefadroxil released from these devices exhibited antibacterial activity for 5-6 days. These results imply that an antibiotic-loaded polymeric device that could prevent bacterial infection on its surface can be formulated using appropriate pore formers.

Bacteria↗