SEARCH · PubMed Health

Results for “reflection”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

PubMed2004

Effect of finite grating, waveguide width, and end-facet geometry on resonant subwavelength grating reflectivity.

Resonant subwavelength gratings (RSGs) offer narrowband high reflectivity with low-reflectivity sidebands. Analysis with the commonly used rigorous coupled-wave analysis assumes an RSG with infinite lateral extent and illumination by plane waves. This analysis is performed with a finite-difference semivectorial high-order accurate two-dimensional Helmholtz code that is able to simulate the entire finite RSG structure in the dimension of the grating vector. We study the effect of finite beam size on RSG reflectivity, resonant wavelength, and spectral response width. Independently, we study the effect of a finite RSG by varying the waveguide length and number of grating periods while fixing the beam size. We show that the placement of the waveguide end facets relative to the termination of the grating has a significant effect on the reflectivity and response width.

Journal Article↗

PubMed2005

Reflective liquid-crystal displays with asymmetric incident and exit angles.

The 2 x 2 matrix methods are extended to calculate the optical behaviors of reflective liquid-crystal displays with asymmetric incident and exit angles. Both the unfolding method and the backward-eigenwave method are employed to derive the 2 x 2 matrix representations. The simulation results for symmetric incident and exit angles from these two methods are identical and agree well with those obtained from the 4 x 4 matrix method when the air-panel surface reflections are neglected. Further, the derived 2 x 2 matrix methods are applied to the asymmetric cases with different incident and exit angles. The simulated results on the normally black vertical alignment and normally white mixed-mode twisted nematic reflective displays show reasonably good agreement with the reported experimental data. In addition, a rubbing effect related to contrast values is observed and analyzed in asymmetric reflective cases. We also find that this effect has a significant influence on the contrast ratios once the difference between the incident and exit angles becomes large.

Journal Article↗

PubMed2005

Angular dependence of the reflectance from an isotropic polydomain medium: the influence of absorption.

The angular dependence of the reflectance from an absorbing randomly oriented polydomain medium consisting of domains either small or large compared with the wavelength is investigated. Besides the two conventional cases, where the refractive index of the incidence medium is either smaller or larger than the averaged index of refraction (small-domain limit) or every principal index of refraction of the domains (large-domain limit), we also discuss a third principal case, which exists only in the large-domain limit. In this third case, only one of the principal indices of refraction is larger than that of the incidence medium, while the averaged index of refraction is smaller. Thus, in contrast to the small-domain limit, total reflection is completely suppressed even in the absence of absorption. A characteristic property of such a polydomain medium is its ability to considerably depolarize linear polarized light in spite of being optically isotropic. Additionally, the parallel polarized reflectance Rp can exceed the perpendicular polarized reflectance Rs over certain angle of incidence ranges. Absorption decreases these domain-size-dependent properties, even under the assumption of constant anisotropy. Nevertheless, for materials with low absorption indices, these effects can affect the optical properties significantly.

Journal Article↗

PubMed2003

14.5% near-normal incidence reflectance of Cr/Sc x-ray multilayer mirrors for the water window.

Cr/Sc multilayer mirrors, synthesized by ion-assisted magnetron sputter deposition, are proved to have a high near-normal reflectivity of R = 14.5% at a grazing angle of 87.5 degrees measured at the wavelength lambda = 3.11 nm, which is an improvement of more than 31% compared with previously published results. Elastic recoil detection analyses show that the mirrors contained as much as 15 at. % of N and traces of C and O. Soft x-ray reflectivity simulations reveal interface widths of sigma = 0.34 nm and an exceptionally small layer thickness drift of approximately 1.6 x 10(-5) nm/multilayer period throughout the stack. Simulations show that a reflectivity of R = 25.6% is attainable if impurities and layer thickness drift can be eliminated. The abrupt interfaces are achieved with ion assistance with a low ion energy of 24 eV and high ion-to-metal flux ratios of 7.1 and 23.1 during Cr and Sc sputter deposition, respectively. In addition, a near-normal incidence reflectivity of 5.5% for the C VI emission line (lambda = 3.374 nm) from a laser plasma source was verified.

Journal Article↗

PubMed2004

Fabrication of a tilted fiber Bragg grating with a designed reflection spectrum profile.

A method of fabricating a tilted fiber Bragg grating (TFBG) with a designed reflection spectrum profile is proposed and demonstrated experimentally. In a reflective TFBG the central wavelength and the reflectivity are dependent on the tilt angles. Controlling the rate at which the tilt angle is continuously varied and the exposure dose in the UV-light writing process permits accurate control of the bandwidth and reflectivity of the grating. The experimental result agrees well with TFBG theory and calculation.

Journal Article↗

PubMed2004

Reflection and transmission of strongly focused vector beams at a dielectric interface.

The reflection and transmission of tightly focused azimuthally and linearly polarized electromagnetic wave beams with subwavelength spot size at a dielectric interface are investigated. A substantial increase of the reflectance of a light beam that is normally incident from a higher-index medium to a lower-index medium and a decrease of the reflectance of a beam that is incident from a lower-index medium to a higher-index dielectric medium in comparison with the Fresnel reflectance are predicted.

Journal Article↗

PubMed2004

Analysis of high-reflectivity metal-dielectric mirrors for edge-emitting lasers.

A metal-dielectric mirror is shown as a simple solution for high-reflectivity coatings on cleaved-facet edge-emitting lasers, as well as a means to provide wavelength stabilization and spectral filtering. We show, through the use of a simple SiO2/Ti/Au coating, reflectivities better than 90% and a 25% reduction in the 30-dB linewidth of the output spectrum. Wavelength filtering and varying reflectivities are described as the result of multiple reflections and a coupled-cavity effect.

Journal Article↗

PubMed2006

Negative and positive lateral shift of a light beam reflected from a grounded slab.

We consider the lateral shift (LS) of a light beam reflecting from a dielectric slab backed by a metal. It is found that the LS of the reflected beam can be negative while the intensity of reflected beam is almost equal to the incident one under a certain condition. The explanation for the negativity of the LS is given in terms of the interference of the reflected waves from the two interfaces. It is also shown that the LS can be enhanced or suppressed under some other conditions. The numerical calculation on the LS for a realistic Gaussian-shaped beam confirms our theoretical prediction.

Journal Article↗

PubMed2003

Infrared reflection spectroscopy of thin films on highly oriented pyrolytic graphite.

The properties of highly oriented pyrolytic graphite (HOPG) as a substrate for external reflection infrared spectroscopy in the mid-infrared region were investigated. Clean HOPG substrates, physisorbed hydrocarbon multilayers, and chemisorbed monolayers of p-substituted aryl radicals on HOPG were used as samples, and the experimental spectra were compared and complemented with the results of spectral simulations. From reflectivity measurements of clean HOPG surfaces with polarized light as a function of the light incidence angle and the frequency, the anisotropic optical constants n (refractive index) and k (absorption index) were determined for in-plane and out-of-plane directions with respect to the graphite basal plane. These constants express the semimetallic properties of HOPG, indicated by an intermediate reflectivity between a typical metal and a dielectric substrate and by asymmetric, distorted peak shapes in adsorbate film spectra, which represent a transition state between symmetrical, positive absorptions on metals and inverted, negative peaks on dielectric substrates. Regarding spectral sensitivity and surface selection rules, HOPG behaves much like a metal and is therefore an equally suitable substrate for external reflection infrared (IR) measurements.

Journal Article↗

PubMed2003

Infrared reflection-absorption spectra of metal-effect coatings.

The results of studies of infrared reflection-absorption spectra of metal-effect coatings are presented in this paper. Such coatings consist of metallic flakes that are dispersed in a polymer binder. The spectra show two distinct phenomena. One is due to the polymer matrix. The other is due to metallic flakes that are dispersed inside the layer. The polymer binder causes narrow spectral lines that give a thickness-dependent intensity and position. Metallic flakes change the average baseline of this spectrum over the entire infrared spectral region. This particular effect was evaluated using a simple rough-surface model. Two parameters of the model, the root-mean-square roughness and the correlation length of the rough surface, described the reflection of the partial beams on the metal flake surfaces and scattering on flakes boundaries. The other two parameters are the specular reflectance and the diffuse reflectance of the plane untextured interface between the polymer matrix and the metal flake surface. Various metal-effect coatings within the same polymer binder were analyzed. The effect of each metal flake dispersion was evaluated by the parameters within the rough-surface model. The results were analyzed in terms of the size and the loadings of flakes that were used in the coatings.

Adsorption↗

PubMed2004

Reflectance study of compressed paper.

Reflectance of three paper grades was investigated using a pressure gauge, an imaging system, and a spectrophotometer. It was observed that under high pressure, dark-colored areas appear in paper when using the imaging system. The area of the dark pattern increases as the pressure is raised. Reflectance measurements as a function of wavelength confirmed that the dark patterns appear due to the contact of the paper and the probe window of the pressure gauge. Based on results by other researchers the amount and the nature of optical contact observed depends on structural properties of paper such as surface roughness, formation, and compressibility. Although there are differences in the spectral properties of different paper grades they all share the common feature that the reflectance is decreasing as a function of the applied pressure. An empiric result for the fine and the super-calendered (SC) paper samples measured is that they both have an exponential dependence of total reflectance as a function of applied pressure when the illumination wavelength is kept constant.

Journal Article↗

PubMed2005

Standard reference material 2036 near-infrared reflection wavelength standard.

Standard Reference Material 2036 (SRM 2036) is a certified transfer standard intended for the verification and calibration of the wavelength/wavenumber scale of near-infrared (NIR) spectrometers operating in diffuse or trans-reflectance mode. SRM 2036 Near-Infrared Wavelength/Wavenumber Reflection Standard is a combination of a rare earth oxide glass of a composition similar to that of SRM 2035 Near-Infrared Transmission Wavelength/Wavenumber Standard and SRM 2065 Ultraviolet-Visible-Near-Infrared Transmission Wavelength/Wavenumber Standard, but is in physical contact with a piece of sintered poly(tetrafluoroethylene) (PTFE). The combination of glass contacted with a nearly ideal diffusely reflecting backing provides reflection-absorption bands that range from 15% R to 40% R. SRM 2036 is certified for the 10% band fraction air wavelength centroid location, (10%)B, of seven bands spanning the spectral region from 975 nm to 1946 nm. It is also certified for the vacuum wavenumber (10%)B of the same seven bands in the spectral region from 10 300 cm(-1) to 5130 cm(-1) at 8 cm(-1) resolution. Informational values are provided for the locations of thirteen additional bands from 334 nm to 804 nm.

Fiber Optic Technology↗

PubMed1998

[Construction of a model eye for simulation of Purkinje reflections for determining the radii of curvature and the position of the crystalline lens].

UNLABELLED: Specular reflections at the optical interfaces of the eye, the Purkinje reflections, are used in physiologic optics and ophthalmology for biometric measurements. To date, there is no standard in the measurement of crystalline lens radii of curvature and position. To that end model eyes were designed. MATERIALS AND METHODS: The most important goal was to simulate the Purkinje reflections I, III, and IV, in the human eye as realistically as possible. The casing of the model eye was made of brass; the optical components were made from contact lens material. RESULTS: Several variants of components were manufactured to reproduce the range of variations in human eyes. By combining different components it was possible to vary the radii of curvature of the cornea and of the crystalline lens, axial separations, crystalline lens rotations and decentrations independently and reproducibly. First applications included devices for biometry of the crystalline lens (phacometry), validation of methods for eye alignment measurement, and refractometry. CONCLUSIONS: The properties of the specular reflections of the model eye are very close to the target values in human eyes. One of the advantages of the model eye is the compact design. This model eye is the first measuring standard for phakometry.

Anthropometry↗

PubMed2001

Potential space and reflective functioning. Towards conceptual clarification and preliminary clinical implications.

The authors propose that although the psychoanalytic constructs 'reflective functioning' and 'potential space' overlap and are sometimes used interchangeably, a knowledge of their distinctions and the ways in which they interface have important clinical implications. These concepts are similar in that both are capacities considered (1) to originate in the caregiver-child relationship, (2) to involve playing with ideas and symbolic thought, (3) to facilitate the therapeutic process and (4) to represent a desirable treatment outcome. The terms diverge in three important ways. First, potential space is a broader concept that can be applied not only to thinking about internal states but to aspects of human experience (e.g. art, religion) involving a sense of aliveness. Reflective functioning is more circumscribed to representations of mental states and their implications for interpersonal functioning. Second, potential space has more of a conscious introspective element, whereas reflective functioning is based in procedural memory. Third, reflective functioning operates intrapsychically, whereas potential space tends to be thought of as occurring in an interpersonal field. The authors hypothesise and illustrate a possible bi-directional, dialectic relationship between the two constructs. It is suggested that this new understanding might, in some cases, facilitate productive reformulations of clinical formulations, such as working with a perceived resistance.

Awareness↗

PubMed2006

Structure of magainin and alamethicin in model membranes studied by x-ray reflectivity.

We have investigated the structure of lipid bilayers containing varied molar ratios of different lipids and the antimicrobial peptides magainin and alamethicin. For this structural study, we have used x-ray reflectivity on highly aligned solid-supported multilamellar lipid membranes. The reflectivity curves have been analyzed by semi-kinematical reflectivity theory modeling the bilayer density profile rho(z). Model simulations of the reflectivity curves cover a large range of vertical momentum transfer q(z), and yield excellent agreement between data and theory. The structural changes observed as a function of the molar peptide/lipid concentration P/L are discussed in a comparative way.

Alamethicin↗

PubMed2002

The effect of UV absorbing sunscreens on the reflectance and the consequent protection of skin.

The in vivo reflectance spectra of Caucasian skin, coated with preparations containing sunscreen vehicle, vehicle with olive oil and vehicle with the UVB and UVA absorbers 2-ethylhexyl-4-methoxycinnamate and 4-t-butyl-4'-methoxydibenzoylmethane were determined. All preparations reduced the reflectance of skin throughout the UVA spectral range (320 to 400 nm), with the sunscreen preparations containing the UVB and UVB plus UVA absorbers reducing the reflectance more than the sunscreen vehicle alone. This phenomenon, which facilitates the penetration of UV radiation to the lower epidermis and dermal layers of skin and therefore lessens sunscreen efficacy, is attributed to optical coupling mediated by refractive index matching of the sunscreen to the upper epidermis. The greater reduction in skin diffuse reflectance caused by sunscreens containing methoxycinnamate is associated with this compound's high refractive index. Also, by determining the excitation spectra of the autofluorescence originating from the dermal layer of skin, the transmission spectra of the various components of sunscreen on skin were established, and these were in good general agreement with previously published spectra.

Benzoates↗

PubMed2002

Management of corn leafhopper (Homoptera: Cicadellidae) and corn stunt disease in sweet corn using reflective mulch.

Plastic reflective mulches significantly reduced populations of corn leafhopper, Dalbulus maidis (DeLong & Wolcott), adults and the incidence of corn stunt disease caused by Spiroplasma kunkelii (CSS) in late planted sweet corn (Zea mays L.). The reflective mulches were more effective than were either foliar or soil applied insecticides in managing both the leafhopper and the pathogen it transmits. Yields of marketable ears were 1.5 to 2 times greater in reflective mulch plots than from fallow plots. This was due to larger ears (individual ear weight and length) rather than an increase in the number of ears. The use of reflective mulches provides an alternative strategy to insecticides in the management of both D. maidis and corn stunt disease. Such a strategy may prove useful to growers in Latin America and to limited resource growers and organic growers in the United States who wish to grow corn without the use of insecticides.

Animals↗

PubMed1985

Root planing with interdental papilla reflection and fiber optic illumination.

The complete removal of accretions during closed scaling and root planing in moderate-deep pockets is difficult, presumably due to inadequate mechanical and visual access. The purpose of this study was to evaluate the effect of minimal papilla reflection and illumination with a prototype fiber optic unit on root planing efficiency. Nonmolar teeth with moderate-deep interproximal pockets (greater than 3 mm) in four patients scheduled to receive immediate complete dentures were randomly divided into groups for treatment: Group I--interproximal root planing augmented by papilla reflection and fiber optic illumination (n = 26 surfaces); Group II--interproximal root planing with papilla reflection only (n = 24); Group III--untreated controls (n = 23). Immediately after treatment, the experimental teeth were extracted, stained with toluidine blue and interproximal areas were evaluated for remaining accretions with a microscope-digitizing pad-computer system. Significantly less (P less than 0.01) root surface was covered by deposits in Group I than Group II (0.57 +/- 0.29% vs. 2.42 +/- 0.63%), and both treatment groups had fewer (P less than 0.0005) accretions than untreated controls (57.72 +/- 3.40%). These results suggest that root planing with papilla reflection produces an interproximal surface with few remaining deposits, and fiber optic illumination and transillumination further enhance this effect.

Dental Calculus↗